CyberData | 011114 | Datasheet | Cyberdata 011114 Singlewire InformaCast Loudspeaker Amplifier-AC (Replacement Product Below) Datasheet

Cyberdata 011114 Singlewire InformaCast Loudspeaker Amplifier-AC (Replacement Product Below) Datasheet
Singlewire Informacast/Berbee-enabled
VoIP V2 Loudspeaker Amplifier
The IP Endpoint Company
Now with up to 25 watts output (802.3at)
The new CyberData V2 SIP-enabled VoIP Loudspeaker Amplifier
is for use with Singlewire's paging and emergency notification
software InformaCast® or InformaCast CK. It provides an easy
method for implementing an IP-based overhead paging system
for both new and legacy installations.
The Amplifier is designed for noisy environments such as
Loudspeaker (part #011068) must be purchased separately.
warehouses and shop floors. It comes with a weather-resistant
NEMA enclosure. With up to 25 watts of driving power (802.3at),
Specifications
the Amplifier provides direct drive of a standard Horn speaker
and supports a line-out connector for connection to an external
amplifier.
Features
Ethernet I/F
10/100 Mbps
Power Input
PoE 802.3at or 802.3af
Operating Temperature
-10o C to 50o C (14o F to 122o F)
Protocol
InformaCast v4.0 and later
Payload Types
G711
Warranty
2 Years Limited
Dimensions
14" x 10" x 4"
Output

802.3af - up to 8 watts

802.3at - up to 25 watts
 InformaCast®
 Dual-speed ethernet 10/100 Mbps
 Weather-resistant NEMA enclosure
 Web-based configuration
 PoE 802.3at and 802.3af-enabled
Lineout:
 Line-out connector
 User-uploadable tones and messages
Output Signal Amplitudes
Output Level
Total Harmonic Distortion
 Digital and manual volume control
Boxed Weight
6.5 lbs.
Part Number:
Loudspeaker Amplifier, AC
Loudspeaker Amplifier, PoE
Loudspeaker Part Number
011114
011116
011068
 Direct 8 Ohm speaker drive
011116
2.0 VPP maximum
+2dBm nominal
0.5% maximum
011114
The IP Endpoint Company
CyberData Corporation

3 Justin Court, Monterey, CA 93940

831.373.2601

Fax: 831.373.4193

www.cyberdata.net
Singlewire Informacast/Berbee-enabled
VoIP V2 Loudspeaker Amplifier
Typical Installation - PoE 802.3af (Part# 011116)
802.3af Generic PoE Switch or
802.3at High Power Switch
1
2
3
4
5
6
011116
VoIP V2 Loudspeaker Amplifiers – No AC Required
IP Phone
Singlewire Server
Typical Installation - AC Version (Part# 011114)
Generic Ethernet Switch
1
2
3
4
5
6
011114
VoIP V2 Loudspeaker Amplifiers – AC Required
High Power PoE Injector in Box
IP Phone
Singlewire Server
*For AC wiring, use a qualified electrician.
V2 Loudspeaker Amplifier Connections
Line-Out Connections
Speaker Out Connections
CyberData Corporation

3 Justin Court, Monterey, CA 93940

831.373.2601

Fax: 831.373.4193

www.cyberdata.net
CLASS II WIRING
1-Sense (+)
2-GND
3-Relay COM
4-Relay NO
5-Line-In(+)
6-Line-In(-)
7-Line-Out(+)
8-Line-Out(-)
9-Spkr Out(+)
10-Spkr Out (-)
930347K/130422
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising