CyberData | 010629 | Datasheet | Cyberdata 010629 IBM SI/O PoweredUSB Hub Datasheet

Cyberdata 010629 IBM SI/O PoweredUSB Hub Datasheet
IBM SI/O Powered-USB Hub
The IP Endpoint Company
Legacy migration with today's open
system connectivity
The IBM SI/O - Powered USB Hub enables
users of IBM 4680 and 4690 series POS
terminals to retain their existing IBM RS-485
peripherals and take advantage of the latest
Powered USB peripherals when migrating to
an open systems platform.
By connecting this Hub to a PC via a single
USB connection, the software application
can control both legacy peripherals and the
latest Powered USB peripherals.
As computer technology changes, the PC
can be replaced without affecting retail
peripheral connectivity. This allows the user
to choose their own computer rather than
being locked into a retail specific computer
costing more money.
Specifications
Built-in Power Supply
A wide range AC input 230 watt power supply
provides ample power for a full compliment of
IBM peripherals and Powered USB devices.
This Hub's powered USB +24 volt supply has
been designed to provide enough power to
support the Epson H6000II's stringent current
requirements.
USB Ports
6
Power Output*
(Standard)
1 @ 24V 2A
3 @ 12V 1A
2 @ 5V 1A
Port Baud Rates
12Mbps, 1.5Mbps
External LEDs
Power output status
AC Voltage
90 VAC to 260 VAC 60/50 Hz
Warranty
2 years limited
Part Number
010629
*All ports support standard "A" type +5V USB connection.
IBM SI/O Ports
Compatibility
USB 1.1 Powered hub compliant.
Support of Windows standby mode operation
which controls the power to the attached
peripherals.
3A
Cash drawer
5A
Keyboard
4A
Display
9A
Scanner
9B
Option
IBM PC Windows 98SE/2000/XP.
OPOS drivers supported.
The IP Endpoint Company
CyberData Corporation

3 Justin Court, Monterey, CA 93940

831.373.2601

Fax: 831.373.4193

www.cyberdata.net
IBM SI/O Powered-USB Hub
Typical Installation
IBM Pole Display
IBM Cash Drawer
IBM Keyboard
PC Host
Powered USB Hub
Signature Capture Pad
Scanner
USB Pole Display
Front View
+5V Ports (2)
+12V Ports (3)
Printer
Side View
+24V Port
On/Off
AC In
Host connect LED
USB Host computer
Fan
AC Cable
The AC connection is a standard IEC type.
Input Requirements:
Voltage: 100 ~120 VAC or 200 ~ 240 VAC Auto Switching
Frequency: 50 / 60 Hz
Input Current: 6.0A (RMS) for 115VAC or 3.0A (RMS) for 230VAC
Host Connector
The Host connector is a standard USB "A" to "B" type cable. Maximum length is 6 meters (20 feet) with good quality cable.
PlusPower Cable Part Numbers - Voltage Keying 2 Meter Cable
5 Volt
12 Volt
24 Volt
w/Single Connector
030244A
030245A
030246A
Hood Only
370188A
370177A
370176A
License note:
The Powered-USB controller board contains specific technology covered by a patent held by IBM Corporation. CyberData has obtained a license from IBM that
permits CyberData Corporation, among other things, to make or sell products that incorporate this technology. The license also permits these products to be
resold by an entity after they have been initially sold by CyberData.
CyberData Corporation

3 Justin Court, Monterey, CA 93940

831.373.2601

Fax: 831.373.4193

www.cyberdata.net
930161B/110422
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising