Denon | AVR-988 | Quick Start Guide | Denon AVR-988 7.1 CH/5.1 2 CH Multi Source Multi Zone Home Theater/MultiMedia Network Client Ready A/V Receiver Quick Start Guide

Denon AVR-988 7.1 CH/5.1 2 CH Multi Source Multi Zone Home Theater/MultiMedia Network Client Ready A/V Receiver Quick Start Guide
AVR-988
New model information
AV Surround Receiver
A/V Surround Receiver featuring Dolby TrueHD, dts-HD Master Audio
and HD Video that enhances your level of entertainment enjoyment.
Bullet points
The Latest HD Audio and Video Support
• Dolby TrueHD and dts-HD Master Audio decoders
• Deep Color up to 36-bit and xvYCC broader color space support
• HDMI1.3a inputs/output that handle HD audio and video signals
Dynamic Discrete Surround Circuit, D.D.S.C.-HD
•
•
•
•
Discrete Devices for ultimate performance in each block
Dual New 32-bit floating point DSP
Master clock design for more accurate processing and less jitter noise
AL24 Plus processing provides more dynamic range
Digital Media Connectivity
• Network Audio/Photo Ready (optional ASD-3N/3W)
• iPod Audio/Photo and Video playback
(optional ASD-1R/3N/3W)
• XM Ready
Compressed Audio Restorer
Denon's new audio technology for MP3/WMA/AAC compressed audio
formats to reproduce higher frequency range and deeper bass sound.
Latest version MultEQ XT
Ease-of-Use
HD Video Circuit
Multi-Zone Capability
• New tower type microphone for more accurate measuring
• Up to eight measurement points
• New filtering ALFC (Adaptive Low Frequency Correction) for higher
resolution processing in low frequency band.
•
•
•
•
•
Discrete devices for ultimate HD video performance in each block
Faroudja DCDi Video Processing
Analog video to HDMI scaling up to 1080p
1080p video pass through
12-bit/216-MHz video encoder and decoder with NSV
New Chassis Construction for clear audio and video signal
• Minimum signal path design
• Direct Mechanical Ground for stable drive
• Separate unit design
*Shown ASD-3W
•
•
•
•
Auto set-up and Room EQ, featuring MultEQ XT from Audyssey
Includes dedicated zone remote control unit
Auto Lip Sync (HDMI 1.3a)
New back panel layout
•
•
•
•
•
•
Two Zone multi-source capability
Digital to analog conversion for multi-zone output
Dual component outputs
Remote in/out
RS-232C control
Optional RC-7000CI/7001RCI 2way control ready
State-of-the-art Denon Solutions for Maximizing Content Quality
• Indentical quality and power for all 7 channels, 110W x 7ch
• Digital / Analog separate windings
• Large-output power amp section and power supply configuration
for stable high-power output
• Stable power supply for high-quality sound and picture playback
• 24-bit/192-kHz D/A converter for all channels
• Pure Direct mode, for the enjoyment of music in high-quality sound
• Variable subwoofer crossover switching
• Pre-amp with Variable Gain Volume
Input / Output terminals
IN
HDMI
Component
S-Video
Composite
Analog audio (Tuner included)
Analog EXT. Input
Digital OPTICAL
Digital COAXIAL
2
3
7
7
10
7.1ch
4
3
Dock control for iPod
1
OUT
Other Features
• 3 Quick Select Buttons
• Auto Surround Back Channels ON function, for auto-detection of
supporting sources
• Auto Surround mode
• Audio Delay function (max. 6 frames or 200 msec)
• Night Mode for neighbor friendly listening
• Muting level settings (Full/-40dB/-20dB)
• Audio Level Memory, capable of correcting different signal levels for each
input device
• Volume Level Limiter, for setting maximum volume levels
• Power-ON Volume Level Memory
• EL programmable remote control unit
HDMI Monitor
Component Monitor
S-Video REC
Monitor
Composite REC
Main Monitor
Zone 2 Monitor
Others
1
2
2
1
2
1
1
Analog audio REC
Zone 2
2
1
Analog Preout
Digital OPTICAL
7.1ch
2
Trigger +12V, 150mA
RS-232C
Remote In/Out
2
1
1/1
Specifications
Power Amplifier Section
Rated output *THD figures are power amp stage values.
Front
110 W + 110 W (8 ohms, 20Hz - 20kHz)
140 W + 140 W (6 ohms, 1kHz)
110 W (8 ohms, 20Hz - 20kHz)
Center
140 W (6 ohms, 1kHz)
Surround
110 W + 110 W (8 ohms, 20Hz - 20kHz)
140 W + 140 W (6 ohms, 1kHz)
Surround back
110 W + 110 W (8 ohms, 20Hz - 20kHz)
140 W + 140 W (6 ohms, 1kHz)
Preamplifier Section
Input sensitivity/impedance
PHONO(MM)
2.5 mV/47 kohms
200 mV/47 kohms
Audio inputs
Output level/Load impedance
Audio outputs
1.2 V/10 kohms
Rec. Audio outputs
200 mV/47 kohms
FM Section
Tuning frequency range
Usable sensitivity
AM Section
Tuning frequency range
Usable sensitivity
General
Power supply
Dimensions (WxHxD)
Weight
87.5 - 107.9 MHz
1.0 µV (11.2 dBf)
520 - 1710 kHz
18 µV
AC 120 V, 60 Hz
434 x 171 x 427 mm
17-3/32” x 6-47/64” x 16-13/16”
13.2 kg, 29.1 lbs
• Design and specifications are subject to change without notice.
• Dolby and the double-D symbol are registered trademarks of Dolby Laboratories.
• DTS is a registered trademark & the DTS logos and symbol are trademarks of DTS, Inc.
• ”DCDi™” is a trademark of Faroudja, a division of Genesis Microchip Inc.
• Audyssey MultEQ is a trademark of Audyssey Laboratories. MultEQ and the Audyssey MultEQ logo are trademarks of Audyssey Laboratories, Inc.
• NSV and Sub Alias Filter are registered trademarks of Analog Devices, Inc.
• ©2007 XM Satellite Radio Inc. All rights reserved.
Denon Brand Company
D&M Building, 2-1 Nisshin-cho, Kawasaki-ku, Kawasaki-shi,
Kanagawa, 210-8569, Japan
www.denon.com
Denon Electronics (USA), LLC
100 Corporate Drive
Mahwah, NJ 07430, U.S.A.
www.usa.denon.com
16940707 A
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising