Denon | DCD-50 | manual | Denon DCD-50 Manual

Denon DCD-50  Manual
Connections
Playback
Settings
Tips
Appendix
.
Contents
DCD-50
COMPACT DISC PLAYER
Owner’s Manual
You can print more than one page of a PDF onto a single sheet of paper.
Front panel
Display
Rear panel
1
Remote
Index
Contents
Connections
Playback
Display
Rear panel
Tips
Appendix
Connections
4
5
5
5
6
6
8
9
10
Accessories
Features
High quality
High performance
Part names and functions
Front panel
Display
Rear panel
Remote control unit
Front panel
Settings
Connections
Installing this unit
Installing horizontally
Installing vertically
Before using the remote control unit
Operating range of the remote control unit
Connecting a digital device
Connecting an analog device
Connecting the power cord
2
Remote
Index
13
14
14
15
17
18
19
20
21
Contents
Connections
Playback
Settings
Playback
Appendix
Tips
Basic operation
Turning the power on
Switching the display’s brightness
Playing CDs
Playing CDs
Playing tracks in a specific order (Program playback)
Playing DATA CDs (MP3 and WMA files)
Playing files
23
23
23
24
24
26
27
28
Appendix
Playable media
Discs
Files
Playback order of MP3/WMA files
About discs and files
Cautions on using media
Loading Discs
Cautions on Loading Discs
How to handle media
Cleaning discs
Explanation of terms
Trademark information
Specifications
Index
30
30
31
Other settings
Auto Standby
Auto Play
Display
Rear panel
33
34
Tips
Troubleshooting
Settings
Front panel
Tips
3
Remote
Index
38
38
38
39
40
41
41
41
42
42
43
44
45
48
Contents
Connections
Playback
Settings
Tips
Appendix
Thank you for purchasing this Denon product. To ensure proper operation, please read this owner’s manual carefully before using the product.
After reading this manual, be sure to keep it for future reference.
Accessories
.
Check that the following parts are supplied with the product.
Quick Start Guide
CD-ROM
(Owner’s Manual)
Safety Instructions
Remote control unit
(RC-1205) (built-in battery)
Power cord
Coaxial digital cable
Front panel
Display
Rear panel
4
Remote
Warranty
(for North America model
only)
Caps (silver) (x4)
Index
Contents
Connections
Playback
Settings
Tips
Appendix
Features
High quality
High performance
0 A new style of CD player with Denon's trademark quality,
0 This new design is the optimal match for our PMA-50 integrated
containing a high-precision 32-bit D/A converter
The D/A converter is a key element of sound quality, so this product
contains our 32bit/192kHz D/A converter, renowned for its high degree
of precision, to bring you the best sound quality possible.
0 This unit can be combined with our high-quality PMA-50 Class D
integrated amplifier to achieve a high degree of reproducibility
even for extremely weak signals
Our high-quality PMA-50 Class D integrated amplifier contains
Advanced AL32 Processing, Denon's unique analog waveform
reproduction technology. Use it with this unit to get the most out of our
exceptional sound quality that is both sensitive and powerful to a
degree that belies the size of the enclosure.
Front panel
Display
Rear panel
amplifier
0 Supports vertical installation
This unit can be placed either vertically or horizontally.
The orientation of the display changes automatically to match the
orientation in which this unit is placed.
The operating mechanism of the CD slot allows smooth and steady
opening and closing whether this unit is placed vertically or horizontally.
0 Supports MP3 and WMA file playback
This unit can play back MP3 and WMA files recorded on CD-R and CDRW discs.
The high-visibility organic EL display can show information such as the
track name and artist name when playing back MP3s and WMAs.
0 The auto standby function reduces power consumption
0 This unit comes with a system remote control that can also
operate the PMA-50
5
Remote
Index
Contents
Connections
Playback
Settings
Tips
Part names and functions
Front panel
e
r
t
yui
o
Q0
.
q w
Front panel
Display
Rear panel
6
Remote
Index
Appendix
Contents
e
Playback
Settings
r t y u i o Q0
Q1
Tips
Appendix
Q1
.
qw
Connections
G Remote control sensor
This receives signals from the remote control unit. (v p. 18)
A Power operation button (X)
This turns the power on/to standby. (v p. 23)
The power status is indicated as follows.
0 Power on: Display lit
0 Standby: Display off
H Reverse-skip button (8)
Returns to the start of the currently playing track.
I Forward-skip button (9)
Plays the next track.
B Protection circuit indicator
This blinks when the protection circuit has operated. (v p. 34)
J CD Eject button (5)
Ejects the disc.
C Display
This displays various pieces of information. (v p. 8)
K Installation holes for vertical installation feet
These are used when the unit is installed vertically. (v p. 15)
D CD slot (v p. 41)
E Play/pause button (1 / 3)
Plays the track/Pauses the track.
F Stop button (2)
Stops playback.
Front panel
Display
Rear panel
7
Remote
Index
Contents
Connections
Playback
Settings
Tips
Display
The display automatically rotates to match the installation orientation.
Display sample
Track xx
Track
mm:ss
song tle
xx/XX
mm:ss
.
xx tracks
Total
mm:ss
Description of icon
P: random
z: repeat all
u: repeat 1
v: track
t: folder
Front panel
Display
Rear panel
8
Remote
Index
Appendix
Contents
Connections
Playback
Settings
Tips
Rear panel
w
e
.
q
A AC inlet (AC IN)
Used to connect the supplied power cord. (v p. 21)
B AUDIO OUT connectors (AUDIO OUT)
Used to connect an amplifier equipped with analog audio input
connectors. (v p. 20)
C DIGITAL AUDIO OUT connector (COAXIAL)
Used to connect an amplifier equipped with digital audio input
connector. (v p. 19)
Front panel
Display
Rear panel
9
Remote
Index
Appendix
Contents
Connections
Playback
Settings
Tips
Appendix
Remote control unit
q
w
CD POWER
DIMMER
IMMER
e
r
o Operating this unit
AMP POWER
INFO
A Power operation button (CD POWER X)
This turns the power on/to standby.
t
y
B DIMMER button
Adjust the display brightness of this unit. (v p. 23)
ENTER
AMP
SETUP
TUP
MODE
C Cursor buttons (df0 1)
These select folders or files on a data CD.
D MODE button
This switches the playback mode. (v p. 27)
AMP
E INFO button
This switches the track information shown in the display during playback. This
switches the playback time display.
VOLUME
PROGRAM
1
2
3
4
5
6
7
8
9
+10
0
CLEAR
F ENTER button
This determines the selection.
0 The DIMMER button also controls the Denon's Integrated Amplifier PMA-50, so the PMA-50
can be operated simultaneously with the DCD-50. When the two units have different settings,
press and hold in the button for lease 2 seconds to reset them both to the default setting, then
make the desired setting.
0 The display brightness is set to “Normal” by default.
Front panel
Display
Rear panel
10
Remote
Index
Contents
Connections
CD POWER
Playback
INFO
ENTER
u
i
o
Q0
Front panel
H Random button (P)
Switches the random playback.
AMP
SETUP
TUP
MODE
I PROGRAM button
This sets program playback. (v p. 26)
Q1
AMP
J Number buttons (0~9, +10)
These enter numbers into the unit.
VOLUME
PROGRAM
1
2
3
4
5
6
7
8
9
+10
0
CLEAR
Display
Tips
G System buttons
These perform playback related operations.
0 Skip buttons (8 / 9)
0 Play/pause button (1 / 3)
0 Stop button (2)
AMP POWER
DIMMER
IMMER
Settings
K Repeat button (L)
Switches the repeat playback.
L CLEAR button
This clears the program registration.
Q2
Rear panel
11
Remote
Index
Appendix
Contents
Connections
CD POWER
q
AMP POWER
DIMMER
IMMER
Playback
B Cursor buttons (df0 1)
These select menu items.
ENTER
AMP
SETUP
TUP
u
C Bluetooth button (V)
This switches the input to Bluetooth of PMA-50. This is also pressed during the
pairing operation.
e
D Input source switching button (q)
This switches input sources of PMA-50.
AMP
r
VOLUME
PROGRAM
1
2
3
4
5
6
7
8
9
+10
0
CLEAR
i
E AMP POWER button (X)
This turns the power of PMA-50 on/to standby.
o
F ENTER button
This determines the selection.
G AMP SETUP button
The setting menu is displayed on the display of PMA-50.
H VOLUME buttons (df)
These adjusts the volume level.
I Mute button (:)
This mutes the output audio of PMA-50.
Front panel
Display
Appendix
A DIMMER button
Adjust the display brightness.
INFO
MODE
Tips
o Amplifier operations
t
y
w
Settings
Rear panel
12
Remote
Index
Contents
Connections
Playback
Settings
Tips
Appendix
Connections
o Contents
o Cables used for connections
14
Connecting a digital device
19
Connecting an analog device
20
Connecting the power cord
21
Provide necessary cables according to the devices you want to
connect.
Audio cable
L
L
R
R
Coaxial digital cable
(supplied)
NOTE
0 Do not plug in the power cord until all connections have been completed.
0 Do not bundle power cords together with connection cables. Doing so can result in
humming or noise.
Front panel
Display
Rear panel
13
Remote
.
.
Installing this unit
Index
Contents
Connections
Playback
Settings
Tips
Appendix
Installing this unit
This unit can be installed in two ways - horizontally or vertically. You can
select how to install this unit according to the installation place and your
preference.
Installing horizontally
The feet are initially attached to the unit for horizontal installation.
NOTE
.
0 Choose how you want to install this unit and install it correctly before playing back
discs.
Front panel
Display
Rear panel
14
Remote
Index
Contents
Connections
Playback
Settings
Installing vertically
1
Appendix
Remove the feet.
.
This orientation is suitable for placing a narrow place.
Tips
Rotate each of the 4 feet counter-clockwise to remove.
Insert the supplied caps (silver) into the holes from
which the feet were removed.
.
.
2
Front panel
Display
Rear panel
15
Remote
Index
Contents
Playback
Settings
4
Remove the cap (black).
Tips
Appendix
Rotate the removed feet clockwise to attach them.
.
.
3
Connections
NOTE
NOTE
0 Be careful not to damage your nails when removing the caps.
If necessary, use a thin-tipped tool to remove the caps. However, be careful
not to damage the unit when using tools.
Front panel
Display
Rear panel
0 After attaching the feet, adjust the height of the feet as necessary so that the
set is stable when installed.
16
Remote
Index
Contents
Connections
Playback
Settings
Before using the remote control unit
Tips
NOTE
0 When inserting the lithium battery, be sure to do so in the proper direction,
following the F and G marks in the battery compartment.
0 If the battery should have a leakage, immediately replace and dispose of the
battery. In this case, there is a risk of burn when the liquid comes in contact with
skins or clothes, so a great care should be taken. If the liquid accidentally comes in
contact, wash with tap water and consult a doctor.
0 Remove the battery from the remote control unit if it will not be in use for long
periods.
.
The remote control unit has a built-in lithium battery.
Pull out the insulation sheet before use.
o Replacing the battery
.
1. Insert a pointed object into the hole in the battery case and pull out the
battery tray.
2. Insert the lithium battery correctly into the battery compartment as
indicated.
3. Replace the battery case in the original position.
.
CR2025
Front panel
Display
Rear panel
Appendix
17
Remote
Index
Contents
Connections
Playback
Settings
Tips
Appendix
Operating range of the remote control
unit
Point the remote control unit at the remote sensor when operating it.
Approx. 23 ft/7 m
30°
Approx. 23 ft/7 m
30°
30°
.
30°
.
[Horizontal installation]
[Vertical installation]
Front panel
Display
Rear panel
18
Remote
Index
Contents
Connections
Playback
Settings
Tips
Connecting a digital device
This unit can be connected to an amplifier with digital audio (coaxial) input connector.
Amplifier
.
COAXIAL
IN
Front panel
Display
Rear panel
19
Remote
Index
Appendix
Contents
Connections
Playback
Settings
Tips
Connecting an analog device
This unit can be connected to an amplifier with analog audio input connectors.
Amplifier
AUDIO
IN
R
L
L
R
L
.
R
Front panel
Display
Rear panel
20
Remote
Index
Appendix
Contents
Connections
Playback
Settings
Tips
Connecting the power cord
Wait until all connections have been completed before connecting the power cord.
To household power outlet
(120V, 60 Hz)
.
Power cord (supplied)
Front panel
Display
Rear panel
21
Remote
Index
Appendix
Contents
Connections
Playback
Settings
Tips
o Contents
Basic operation
23
Playing CDs
24
Playing DATA CDs (MP3 and WMA files)
27
Other settings
30
Front panel
Display
Rear panel
22
Remote
Index
Appendix
Contents
Connections
Playback
Settings
Tips
Appendix
Basic operation
CD POWER X
DIMMER
CD POWER
Turning the power on
AMP POWER
DIMMER
IMMER
1
INFO
ENTER
o When power is switched to standby
AMP
SETUP
TUP
MODE
Press CD POWER X to turn on power to the unit.
Turns the display on.
1
Press CD POWER X.
Turns the display off.
AMP
VOLUME
0 You can also press X on the main unit for this operation.
PROGRAM
1
2
3
4
5
6
7
8
9
+10
0
CLEAR
NOTE
0 When the power is in the standby mode, some circuits are electrified. Before you
go out or travel for a long period of time, disconnect the power cord from the power
outlet.
.
Switching the display’s brightness
The brightness of the display can be adjusted to one of three levels.
1
Front panel
Display
Rear panel
23
Press DIMMER.
Remote
Index
Contents
Connections
Playback
Settings
Tips
Appendix
Playing CDs
CD POWER
Playing CDs
AMP POWER
DIMMER
IMMER
INFO
1
2
INFO
ENTER
1/3
8
RANDOM
PROGRAM
AMP
9
2
REPEAT
NOTE
0 Do not place any foreign objects in the disc tray. Doing so could damage the set.
0 8 cm discs cannot be used on this unit. Do not insert 8 cm discs into the CD slot.
0 Do not put anything other than a CD to CD slot. Doing so could result in damage.
VOLUME
o Eject CDs
PROGRAM
1
2
3
4
5
6
7
8
9
+10
0
CLEAR
Press 1/3.
The 1 indicator lights on the display. Playback starts.
1
Press 5 while playback is stopped.
CLEAR
.
0-9, +10
AMP
SETUP
TUP
MODE
Insert a disc. (v p. 41)
Front panel
Display
Rear panel
24
Remote
Index
Contents
Connections
Playback
Settings
Function
1/3
Play/Pause
2
Stop
89
Skip to previous track / Skip to next track
1
Select the track
Random playback
REPEAT L
Repeat playback
INFO
Time display switching
Use 0 – 9 and +10 to select the tracks.
GExampleH
Track 4 :
Press number 4 to select track 4.
Track 12 :
Press numbers +10 and 2 consecutively to select track 12.
(Press and hold) Fast-reverse / Fast-forward
RANDOM P
0 Switching between All-track repeat and Single-
track repeat.
0 Track elapsed time, Track remaining time and
Total remaining time
Front panel
Display
Appendix
o Playing a specific track (Direct searching)
Operation buttons
0 – 9, +10
Tips
Rear panel
25
Remote
Index
Contents
Connections
Playback
Settings
In the stop mode, press 9.
The tracks are shown in the programmed order in the display each
time 9 is pressed.
Up to 25 tracks can be programmed.
2
3
o To clear the last track programmed
In the stop mode, press PROGRAM.
“PROG” is displayed on the display.
In the stop mode, press CLEAR.
To clear the last track programmed.
The last track programmed is cleared each time the button is pressed.
Use 0 – 9 and +10 to select the tracks.
GExampleH
To program tracks 3 and 12 to be played in that order, press 3, +10,
and 2 one after the other.
o Clearing the all programmed track
In the stop mode, press PROGRAM.
Press 1/3.
Playback starts in the programmed order.
0 When RANDOM P is pressed during program playback, the programmed tracks
are played in random order.
0 When REPEAT L is pressed during program playback, the tracks are played
repeatedly in the programmed order.
NOTE
0 The program is cleared when the disc is ejected or the power is turned off.
Front panel
Display
Appendix
o Checking the order of the programmed tracks
Playing tracks in a specific order
(Program playback)
1
Tips
Rear panel
26
Remote
Index
Contents
Connections
Playback
Settings
Tips
Appendix
Playing DATA CDs (MP3 and WMA files)
0 This section explains how to playback MP3 and WMA files that are
CD POWER
DIMMER
IMMER
uio p
ENTER
MODE
1/3
8
RANDOM
recorded onto a CD-R or CD-RW. For details on how to playback files
recorded onto media other than CD-R or CD-RW, see the following
sections.
0 There are many music distribution sites on the Internet allowing you to
download music files in MP3 or WMA (Windows Media® Audio) format.
The music (files) downloaded from such sites can be stored on CD-R or
CD-RW discs and played on this unit.
AMP POWER
INFO
INFO
ENTER
AMP
SETUP
TUP
MODE
AMP
“Windows Media” and “Windows” are the trademarks or
registered trademarks of Microsoft Corporation in the United
States and other countries.
9
2
REPEAT
VOLUME
PROGRAM
2
3
4
5
6
7
8
9
+10
0
CLEAR
.
0 – 9, +10
1
Front panel
Display
Rear panel
27
Remote
Index
Contents
Connections
Playback
Settings
Playing files
1
2
Insert a CD-R or CD-RW containing MP3 or WMA format
music files into the CD slot. (v p. 41)
Operation buttons
Function
1/3
Play/Pause
About the display
0 When “Folder mode” is selected
2
Stop
89
Skip to previous track / Skip to next track
ui
Folder select
op
File select
0 – 9, +10
Select the track
MODE
Switch to Folder playback mode
RANDOM P
Random playback
REPEAT L
Repeat playback
0 All the files in the selected folder are played.
“t” indicator turns off.
After the selected folder and files are played, all the files in all the
folders are played.
0 Switching between All-track repeat and Single-
track repeat.
Use ui to select the folder to be played.
Use o p to select the file to be played.
0 The folder and file numbers are set automatically when the disc is loaded.
Press 1/3.
Playback starts.
Front panel
Display
Appendix
(Press and hold) Fast-reverse / Fast-forward
Press MODE to select the folder mode or all mode.
“t” indicator lights.
All the files in the selected folder are played.
0 When “All mode” is selected
3
4
5
Tips
Rear panel
28
Remote
Index
Contents
Connections
Playback
Settings
During playback, press INFO.
0 Switching between the title name, artist name and album name.
0 The player can display the following characters:
ABCDEFGHIJKLMNOPQRSTUVWXYZ
abcdefghijklmnopqrstuvwxyz
0123456789
! ” # $ % & : ; < > ? @ \ [ ] _ ` l { } ~ ^ ’( ) * + , - . / = (space)
o Playable files (Extension) (v p. 38)
o To switch the folder or file during playback
0 Folder
If there is no title, the file name is displayed instead.
Use ui to select the folder, then press ENTER.
0 Files
Use o p to select the file, then press ENTER.
Also use 8, 9 to select the file, or use 0 – 9, +10 to select the
file number.
Display
Rear panel
Appendix
o Switching the display
NOTE
0 Programmed playback is not possible with MP3/WMA discs.
0 Copyright-protected files cannot be played.
(The “Unsupported” is displayed.)
Note that depending on the software used for burning and other conditions, some
files may not play or display correctly.
Front panel
Tips
29
Remote
Index
Contents
Connections
Playback
Settings
Tips
Appendix
Other settings
CD POWER X
CD POWER
Auto Standby
AMP POWER
DIMMER
IMMER
Sets whether to automatically switch the unit to the standby mode when
the unit remains in the stop mode for more than 30 minutes.
INFO
1
ENTER
1/3
AMP
SETUP
TUP
MODE
When this unit in the power on, press and hold CD
POWER X for 5 seconds.
On:
Enable Auto Standby mode.
Off
(Default):
Disable Auto Standby mode.
AMP
VOLUME
PROGRAM
1
2
0 Press and hold CD POWER X to turn this setting ON or OFF.
0 When the setting is On, the display shows “Auto Standby On”.
0 When the setting is Off, the display shows “Auto Standby Off”.
3
5
6
8
9
+10
0
CLEAR
.
4
7
Front panel
Display
Rear panel
30
Remote
Index
Contents
Connections
Playback
Settings
Tips
Auto Play
Set whether to automatically start playback after inserting a disc.
1
When this unit in the power on, press and hold 1/3 for
5 seconds.
On:
Playback starts automatically.
Off
(Default):
Playback does not start automatically.
0 Press and hold 1/3 to turn this setting ON or OFF.
0 When the setting is On, the display shows “Auto Play On”.
0 When the setting is Off, the display shows “Auto Play Off”.
0 Playback starts automatically when Auto Play is set to On and the power is turned
on when a disc is already inserted.
Front panel
Display
Rear panel
31
Remote
Index
Appendix
Contents
Connections
Playback
Settings
Tips
Appendix
o Contents
Troubleshooting
Tips
I want to playback just the specified folder
33
Power does not turn on / Power is turned off
I want to start playback automatically after inserting a disc
33
LED is flashing
34
Operations cannot be performed through the remote control unit
35
I want to play back music with a single operation from the standby
state
Front panel
Display
Rear panel
33
32
34
No sound comes out
36
Cannot playback discs
36
Cannot eject the disc
37
File names or tag data are not displayed correctly
37
Remote
Index
Contents
Connections
Playback
Settings
Tips
Tips
I want to playback just the specified folder
0 The MODE button to set the playback range to “Folder mode”. (v p. 28)
I want to start playback automatically after inserting a disc
0 Turn Auto Play on. (v p. 31)
I want to play back music with a single operation from the standby state
0 Press the 1/3 button on this unit or the remote control unit to turn on the power and start playback.
Front panel
Display
Rear panel
33
Remote
Index
Appendix
Contents
Connections
Playback
Settings
Tips
Appendix
Troubleshooting
If a problem should arise, first check the following.
1. Are the connections correct?
2. Is the set being operated as described in the owner’s manual?
3. Are the other devices operating properly?
If this unit does not operate properly, check the items listed in the table below.
Should the problem persist, there may be a malfunction. In this case, disconnect the power immediately and contact your store of purchase.
o Power does not turn on / Power is turned off
Symptom
Cause / Solution
Page
Power is not turned on.
0 Check whether the power plug is correctly inserted into the power outlet.
21
Power automatically turns
off.
0 The Auto Standby mode is set. The Auto Standby mode switches the unit to standby mode when the unit
30
Cause / Solution
Page
is not operated for approximately 30 minutes. To disable the Auto Standby mode, press and hold the CD
POWER X button on the remote control unit for more than 5 seconds when the Auto Standby mode is
enabled.
o LED is flashing
Symptom
Flashing red.
Front panel
0 A circuit in the unit has malfunctioned. Disconnect the power and contact the repair center.
Display
Rear panel
34
Remote
Index
-
Contents
Connections
Playback
Settings
Tips
Appendix
o Operations cannot be performed through the remote control unit
Symptom
Operations cannot be
performed through the
remote control unit.
Cause / Solution
Page
0 Batteries are worn out. Replace with new batteries.
17
0 Operate the remote control unit within a distance of about 23 ft/7 m from this unit and at an angle of within
18
30°.
0 Remove any obstacle between this unit and the remote control unit.
-
0 Insert the batteries in the proper direction, checking the F and G marks.
17
0 The unit’s remote control sensor is exposed to strong light (direct sunlight, inverter type fluorescent bulb
-
0 When using a 3D video device, the remote control unit of this unit may not function due to effects of
-
light, etc.). Move the unit to a place in which the remote control sensor will not be exposed to strong light.
infrared communications between units (such as TV and glasses for 3D viewing). In this case, adjust the
direction of units with the 3D communications function and their distance to ensure they do not affect
operations from the remote control unit of this unit.
Front panel
Display
Rear panel
35
Remote
Index
Contents
Connections
Playback
Settings
Tips
Appendix
o No sound comes out
Symptom
No sound is produced. Or
sound is distorted.
Cause / Solution
Page
0 Check the connections for all devices.
13
0 Insert connection cables all the way in.
-
0 Check that input connectors and output connectors are not reversely connected.
-
0 Check cables for damage.
-
0 Check the amplifier’s functions and controls and adjust as necessary.
-
o Cannot playback Discs
Symptom
Cause / Solution
Page
Cannot playback when the
play button is pressed, or
cannot correctly play back
a specific part of the disc.
0 The disc is dirty or scratched. Either clean the disc, or insert a different disc.
42
Cannot playback CDR/CD-RW.
0 Discs cannot be played back unless they have been finalized. Use a finalized disc.
38
0 This may be caused by poor recording conditions, or the disc itself may be of poor quality. Use a correctly
-
0 The DATA CD playback function of this unit only supports playback of MP3 and WMA files.
38
0 The disc is loaded upside-down.
38
0 The disc that cannot be played is loaded.
38
recorded disc.
“Unsupported” is
displayed.
Front panel
Display
Rear panel
36
Remote
Index
Contents
Connections
Playback
Settings
Tips
Appendix
o Cannot eject the disc
Symptom
The disc is not ejected
when the Eject button is
pressed.
Cause / Solution
Page
0 Press and hold the 5 button for 5 seconds or more.
-
0 This unit is malfunctioning. Contact our repairs service.
-
o File names or tag data are not displayed correctly
Symptom
The file names are not
displayed properly (“…”,
etc.).
Front panel
Cause / Solution
Page
0 Characters that cannot be displayed are used. This is not a malfunction. On this unit, characters that
cannot be displayed are replaced with a “.” (period).
Display
Rear panel
37
Remote
Index
-
Contents
Connections
Playback
Settings
Tips
Appendix
Playable media
Discs
Files
CD-R and CD-RW discs created in the format described below can be
played.
Playable media
CD
.
o Writing software format
ISO9660 level 1, 2
Expansion format (Juliet.Romeo)
.
CD-R
o When written in other formats, it may not be
possible to play the disc properly.
.
CD-RW
Maximum number of playable files and folders
Number of folders : 255
Number of files : 255
NOTE
0 Some discs and some recording formats may not be playable.
0 Non-finalized discs cannot be played.
o Tag data
ID3-TAG (Ver.1.x and 2.x)
WMA-TAG
(The title, artist, and album tag data are supported)
Front panel
Display
Rear panel
38
Remote
Index
Contents
Connections
Playable files (Extension)
Playback
Settings
When there are multiple folders containing MP3/WMA files, the playback
order of folders is automatically set when this unit reads the media. The
files in each folder are played back in the order in which the files were
recorded on the media, from the oldest date and time.
CD-R/CD-RW
For playback of files on CD-R or CD-RW, files in all folders on the first
layer are played first, next on the second layer, then next on the third layer,
and so on in this order.
0 Bit rate : 32 kbps to 320 kbps
0 File format : MPEG1 Audio Layer 3
0 Sampling frequency : 32 / 44.1 / 48 kHz
WMA (.wma)
Appendix
Playback order of MP3/WMA files
File specification
0 Sampling frequency : 32 / 44.1 / 48 kHz
MP3 (.mp3)
Tips
0 Bit rate : 64 kbps to 192 kbps
0 File format : Windows Media Audio
NOTE
0 Be sure to give files the extension “.mp3” or “.wma”. Files with any other
extensions or files with no extensions cannot be played.
0 Recordings you have made should only be used for your personal enjoyment, and
as per copyright laws may not be used in other ways without permission of the
copyright holder.
Front panel
Display
Rear panel
0 The playback order displayed on a PC may differ from the actual playback order.
0 The playback order with a CD-R/CD-RW may differ, depending on the writing
software.
39
Remote
Index
Contents
Connections
Playback
Settings
Tips
About discs and files
Files, such as MP3/WMA etc., recorded on CD-R/-RW are divided into
large segments (folders) and small segments (files). Files are stored in
folders, and folders can be placed for storage in a hierarchy. The unit can
recognize up to 8 levels of folders.
CD-R/-RW
Folder 1
File 1
File 2
File 5
1st level
File 3
Folder 3
2nd level
File 6
File 7
3rd level
.
File 4
Folder 2
When writing MP3/WMA etc. files on a CD-R/-RW disc, set the writing
software’s format to “ISO9660”. The files may not play properly if they are
recorded in other formats. For details, refer to the instructions of your
writing software.
Front panel
Display
Rear panel
40
Remote
Index
Appendix
Contents
Connections
Playback
Settings
Tips
Appendix
Cautions on using media
Loading Discs
Cautions on Loading Discs
0 When the set is installed horizontally, insert the disc with the label side
0 3 inch/8 cm discs cannot be used on this player. Do not insert 3 inch/8
up.
0 When the set is installed vertically, insert the disc with the label facing
right.
0 Insert the disc into the CD slot slowly. Release your hand once the disc
is drawn in.
cm discs into the CD slot.
0 Do not use an 3 inch/8 cm disc adapter.
0 Only load one disc at a time. Loading two or more discs can damage
the unit or scratch the discs.
0 Do not use cracked or warped discs or discs that have been repaired
with adhesive, etc.
0 Do not use discs on which the sticky part of cellophane tape or labels is
.
exposed or on which there are traces of where labels have been
removed. Such discs can get caught inside the player and damage it.
0 When no disc is loaded, “No Disc” is displayed.
0 When the disc is loaded upside-down, “Unsupported” is displayed.
0 When the disc’s information could not be read properly, “Unsupported” is
displayed.
Front panel
Display
Rear panel
41
Remote
Index
Contents
Connections
Playback
Settings
How to handle media
0 Do not get fingerprints, oil or dirt on discs.
0 If there are fingerprints or dirt on a disc, wipe them off before using the
disc.
0
0
0
cases.
Do not bend or heat discs.
Do not enlarge the hole in the center.
Do not write on the labeled (printed) surface with ball-point pens,
pencils, etc., or stick new labels on discs.
Condensation may form on discs if they are moved suddenly from a
cold place (outdoors for example) to a warm place, but do not try to dry
discs with a hairdryer, etc.
Do not store discs in the following places:
0 Use a commercially available disc cleaning set or a soft cloth to clean
discs.
1. Places exposed to direct sunlight for long periods of time
2. Dusty or humid places
3. Places exposed to heat from heaters, etc.
Gently wipe the disc from the
inside towards the outside.
Do not wipe with a circular
motion.
.
0
Appendix
Cleaning discs
0 Take special care not to scratch discs when removing them from their
0
Tips
NOTE
0 Do not use record spray, antistatic agents, benzene, thinner or other solvents.
Front panel
Display
Rear panel
42
Remote
Index
Contents
Connections
Playback
Settings
Tips
Appendix
Explanation of terms
MP3 (MPEG Audio Layer-3)
Dynamic range
This is an internationally standardized audio data compression scheme,
using the “MPEG-1” video compression standard. It compresses the data
volume to about one eleventh its original size while maintaining sound
quality equivalent to a music CD.
The difference between the maximum undistorted sound level and the
minimum discernible level above the noise emitted by the device.
Bit rate
This is the amount of audio data recorded on a disc that is read in one
second.
WMA (Windows Media Audio)
This is audio compression technology developed by Microsoft
Corporation.
WMA data can be encoded using Windows Media® Player.
To encode WMA files, only use applications authorized by Microsoft
Corporation. If you use an unauthorized application, the file may not work
properly.
Finalizing
This process enables CDs recorded with a CD recorder or drive to be
played by other players.
Linear PCM
This is an uncompressed PCM (Pulse Code Modulation) signal. Unlike
lossy compression audio sources such as MP3, no audio quality or
dynamic range deteriorates.
Sampling frequency
Sampling involves taking a reading of a sound wave (analog signal) at
regular intervals and expressing the height of the wave at each reading in
digitized format (producing a digital signal).
The number of readings taken in one second is called the “sampling
frequency”. The larger the value, the closer the reproduced sound is to the
original.
Front panel
Display
Rear panel
43
Remote
Index
Contents
Connections
Playback
Settings
Tips
.
Trademark information
Adobe, the Adobe logo and Reader are either registered trademarks or
trademarks of Adobe Systems Incorporated in the United States and/or
other countries.
Front panel
Display
Rear panel
44
Remote
Index
Appendix
Contents
Connections
Playback
Settings
Tips
Specifications
o Audio performance
0 Analog output
Channels:
2-channels
Playable frequency range:
2 Hz – 20 kHz
Playable frequency response:
20 – 20 kHz (±1%)
S/N:
105 dB
Dynamic range:
100 dB
Channel Separation:
100 dB
Harmonic distortion:
0.004 % (1 kHz)
Wow & flutter:
Crystal accuracy
0 Output level
Signal type:
2 V RMS stereo
0 Digital output
Coaxial:
0.5 Vp-p / 75 Ω/ohms
0 Optical readout system
Laser:
AlGaAs
Wave length:
780 nm
Signal type:
16-bit linear PCM
Sampling frequency:
44.1 kHz
Front panel
Display
Rear panel
45
Remote
Index
Appendix
Contents
Connections
Playback
Settings
Tips
o General
Power supply:
AC 120 V, 60 Hz
Power consumption:
10 W
Power consumption in standby mode:
0.4 W or less
Operating temperatures:
+5 ℃ - +35 ℃
Operating humidity:
5 – 90 % (without dew)
For the purpose of improvement, the specifications and design are subject to change without notice.
Front panel
Display
Rear panel
46
Remote
Index
Appendix
Contents
Connections
Playback
Settings
Tips
o Dimensions
1 1/4
(30)
6 3/4 (170)
9 1/2 (240)
1 5/8
(40)
Unit : in. (mm)
7 7/8 (200)
6 1/8 (154)
1
(23)
1/4
(6)
3 1/4 (80)
.
1
(23)
3 1/2 (86)
1/4 (6)
o Weight: 5 lbs 5 oz (2.4 kg)
Front panel
Display
Rear panel
47
Remote
Index
Appendix
Contents
Connections
Index
Playback
Settings
Tips
vP
Program playback .......................................... 26
vA
Analog device ................................................ 20
Auto Play ........................................................ 31
Auto Standby ................................................. 30
vR
Random playback .................................... 24, 27
Rear panel ........................................................ 9
Remote control unit ........................................ 10
Repeat playback ...................................... 24, 27
vC
CDs ................................................................ 24
vD
DATA CDs ..................................................... 27
Digital device .................................................. 19
Dimmer .......................................................... 23
Display ............................................................. 8
vF
Front panel ....................................................... 6
Front panel
Display
Rear panel
48
Remote
Index
Appendix
www.denon.com
49
3520 10488 00AD
Copyright ©2015 D&M Holdings Inc.All Rights Reserved.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising