Denon | AH-NCW500 | manual | Denon AH-NCW500 Exceptionally Portable, Wireless, Noise-Cancelling, Luxury Traveler’s Headset. Manual

Denon AH-NCW500 Exceptionally Portable, Wireless, Noise-Cancelling, Luxury Traveler’s Headset. Manual
TM
GLOBE CRUISER
AH-NCW500
On-Ear Headphones / Wireless Headphones
Owner’s Manual
Getting started
Thank you for purchasing your Denon Globe Cruiser headphones. Denon’s engineers have taken great care to design and develop these headphones to provide you with the best-in-class personal listening experience.
Please refer to this guide for assistance when using these headphones.
Contents
Getting started···············································································1
Accessories···················································································1
Features·························································································1
Functions·······················································································2
Preparation for Use········································································2
Charging the battery······································································2
Pairing with a Bluetooth device·····················································3
Turning Bluetooth Wireless Connectivity On·································4
Adjusting the fit of the headphones··············································4
Listening to Music··········································································5
Listening to music using Bluetooth···············································5
Listening to music using the audio cable·······································5
Operating the Noise Cancelling function to block out
ambient noise················································································5
Conducting Phone Calls································································6
Making a call··················································································6
Answering an incoming call···························································6
Ending a call···················································································6
Using the call waiting function·······················································6
Ignoring an incoming call·······························································6
Switching from headphones to the mobile phone during a call·····6
Other operations············································································6
Additional Information··································································7
Overview of LED indicator display patterns···································7
Airplane use···················································································7
Storing in the carrying case···························································8
Troubleshooting·············································································8
Precautions on use of the headphones·········································9
Trademark information···································································9
Product specifications···································································9
Accessories
Features
q Quick Guide.............................................................................. 1
w Precautions on the use of headphones.................................... 1
e Note on radio............................................................................ 1
r Service center list..................................................................... 1
t Audio cable (length: approx. 1.3 m).......................................... 1
y USB cable (for charging, length: approx. 1.3 m)....................... 1
u Airline Adapter.......................................................................... 1
i Carrying case............................................................................ 1
t
y
Wireless connection over Bluetooth (vpage 5)
Enjoy listening to music wirelessly from Bluetooth enabled
audio devices, once paired. Also, easily control the operation of
Bluetooth-enabled devices from the headphones.
Wireless, CD-Quality Sound
These headphones feature aptX technology for CD-Quality audio
over Bluetooth connection.
If your Bluetooth-enabled audio source supports aptX, this feature
is enabled automatically.
Noise cancelling function (vpage 5)
u
i
Turn the noise canceling function on to enjoy clear sound with
minimal ambient noise, even when riding in a noisy commuter
train, etc.
Hands-free calling compatibility (vpage 6)
Pairing the headphones with a Bluetooth-compatible mobile phone
enables hands-free calling.
Crystal Clear Phone Conversation
The headphones utilize CVC (Clear Voice Capture) technology for
clear calls with minimum echo and signal noise.
Rechargeable battery included (vpage 2)
Recharge the battery on the headphone by connecting it to your
computer using the USB micro cable (included).
Optional wired listening via audio cable (vpage 5)
An audio cable is included for when wireless listening is not allow
(for example, in flight).
1
Getting started
Preparation for Use
Charging the battery
Functions
NOTE
• If the battery runs out during headphone use, a beeping sound will
be emitted and the headphones will turn off.
• Usage time may vary depending on the usage environment’s
temperature, method of use, etc.
• If usage time is extremely short even when the battery has been
fully charged, the battery may be near the end of its life. In this case,
please contact DENON service center.
• Do not attempt to replace the battery.
t
w
o
q
y
w
r
u
e
i
q Call button
Press to make calls using a paired mobile phone device.
w Status indicator LED
Displays information on the headphones’ status.
e Stereo mini jack (ø2.5 mm)
Connector for the included audio cable.
r Noise cancelling function toggle switch
Turns the noise cancelling function on and off.
t Control wheel
Operates a paired audio device (vpage 5 “Listening to music
using Bluetooth”.
y Call microphone
u Bluetooth button
Turns Bluetooth on and off. Also used when performing Bluetooth
pairing.
i Charging port (USB connection port)
Recharge the headphone battery by connecting the USB micro
cable (included).
o L/R indication
Charge the headphone battery when first using it after purchase or
when the battery level is low by connecting the headphones to a
computer using the included USB cable.
The LED indicator will flash when the battery is being charged.
• 0% to 49% charged : Slowly flashes red
• 50% to 99% charged : Flashes red every 2 seconds
• 100% charged : LED indicator turns off
• When the battery level is low, the LED indicator will flash red every
3 seconds accompanied by a beeping sound.
• Should the battery run out of power, you can still enjoy listening
to music by connecting the audio cable (included) (vpage 5
“Listening to music using the audio cable”).
• When fully charged, the battery provides approx. 10 hours of audio
playback time.
• Audio from a paired Bluetooth device can be played and phone calls
can be made while the battery is recharging. In this case, depending
on the personal computer being used, some noise may mix with the
headphones audio.
• It takes approx. 2 hours to charge the battery from empty to full.
2
Preparation for Use
Pairing with a Bluetooth device
To listen to music or make phone calls, the Bluetooth device must first
be registered (pairing).
After pairing has been completed, the Bluetooth device can be
reconnected to the headphones.
NOTE
Please pair devices again in the following cases.
• After nine devices or more have been paired
The headphones can register a maximum of eight devices. From the
ninth device onward, new pairings will overwrite previously stored
pairing information, starting from the oldest pairing.
• If the pairing information on the headphones or Bluetooth device has
been deleted
the headphones’
1 With
Bluetooth function
• The headphones will exit pairing standby mode if pairing has not
been completed within 3 minutes. In this case, press and hold the
Bluetooth button for 5 seconds or more to turn off the Bluetooth
function, then start the pairing process again.
• The headphones will be shown as “DENON AH-NCW500” on the
Bluetooth device to be paired with.
nnDeleting pairing information
If incorrect pairing information has been registered or you wish to
pair devices again, delete the registered pairing information first.
Press and hold the call button for approx. 5 seconds or more when
the headphones and Bluetooth device are paired to delete the
pairing information. When the information is deleted, a beeping
sound will be emitted and the red and blue LED indicators will flash
simultaneously five times.
off, press and hold the
Bluetooth button for
approx. 4 seconds.
• The red and blue LED indicators
will alternately flash, and the
headphones will enter pairing
standby mode.
• If the Bluetooth function is
on, turn it off (vpage 4
“Turning Bluetooth Wireless
Connectivity On”).
pairing procedures on the Bluetooth device
2 Initiate
to be connected, and search for the headphones.
• Refer to the Bluetooth device’s owner’s manual for details.
• If a PIN code (passkey) is requested, enter “0000” (four zeros).
• The blue LED indicator will light up for approx. 5 seconds
when pairing has been completed.
3
Preparation for Use
Turning Bluetooth Wireless Connectivity On Adjusting the fit of the headphones
Turn the Bluetooth function on in advance for the Bluetooth
device which is to be connected.
Press and hold the headphones’
Bluetooth button for approx. 1
second.
• A beeping sound will be emitted
and the red and blue LED indicators
will light up simultaneously for
approx. 1 second.
• The power switches on, and the
Bluetooth function switches on.
• Bluetooth
is
automatically
connected if the headphones and
Bluetooth device have already been
paired (vpage 3 “Pairing with
a Bluetooth device”).
Adjust the slider length to fit your head when wearing the headphones.
nnTurning Bluetooth Wireless Connectivity Off
There are 2 ways of turning the Bluetooth wireless connectivity
off: 1) connect the audio cable (included) to the audio input jack on
the left ear cup. This automatically turns Bluetooth off and power
switches to standby status. OR; 2) Press and hold the Bluetooth
button for approx.. 5 seconds or more….
• A beeping sound will be emitted and the red and blue LED
indicators will light up simultaneously for approx. 1 second.
• The power then switches to a standby status, and the Bluetooth
function switches off.
NOTE
• Please read the attached “Precautions on the use of headphones”
documentation.
• Avoid getting your fingers or other body parts caught in the product’s
moving portions.
• Do not pull forcefully on the sliders.
• If an audio cable is connected to the headphones while the Bluetooth
function is on (power is on), the Bluetooth function automatically
switches off (power switches to standby status).
• Even when in a power standby status, the headphones still consume
a small amount of power.
NOTE
If the LED indicators don’t light up when you press the Bluetooth
button, the battery has been depleted. Please recharge the battery.
4
Listening to Music
When using the headphones wirelessly, make sure that the Bluetooth
function on the Bluetooth device is enabled. When using the
headphones with the cable connected, make sure that the Bluetooth
function is disabled.
Listening to music using Bluetooth
Operates the paired Bluetooth device using the control wheel.
NOTE
The Bluetooth function will turn off automatically when a device is
connected using the audio cable, and operation of the connected
Bluetooth device using the headphones will be disabled.
q
e
Play/Pause
Next track
Previous track
Increase
volumez1
Decrease
volumez2
Rotating e the control wheel and bouncing it
off the momentary switch
Rewind
The blue LED indicator will light up continuously during playback.
z1 When the volume reaches the maximum level, two short beeps
sound as a warning. You cannot increase the volume any more.
z2 When the volume reaches the minimum level, two short beeps
sound as a warning. You cannot decrease the volume any more.
Operating the Noise Cancelling function to
block out ambient noise
zz Refer to the Bluetooth device’s owner’s manual for information on
supported Bluetooth profiles.
Listening to music using the audio cable
w
Press q one time
Press q two times
Press q three times
Operates after q has been
pressed two times in quick
succession
Operates after q has been
pressed three times in quick
succession
Rotating w the control wheel and bouncing it
off the momentary switch
Fast forward
• These headphones are compatible with SCMS-T copy protection.
They can be used to listen to audio from mobile phones, one-seg
TVs, and other SCMS-T–compatible devices.
• In order to listen to music using a Bluetooth connection, the
connected Bluetooth device must support A2DP (Advanced Audio
Distribution Profile).z
• In order to control audio playback from the connected Bluetooth
device using the headphone controls, the connected Bluetooth
device must support AVRCP (Audio Video Remote Control Profile).z
Turn the noise cancelling function toggle switch to on.
When the switch is flipped, the blue LED indicator will flash two times.
2.5 mm plug
3.5 mm plug
Use the included audio cable when not using the Bluetooth function,
when connecting to a device that does not support Bluetooth, etc.
• Even when connecting using the audio cable, the noise cancelling
function can be used.
NOTE
• Bluetooth calling and audio device control functions on the
headphones cannot be used when connecting using the audio cable.
• The noise cancelling function may not operate properly for certain
portable devices with digital amplifiers, etc.
5
Conducting Phone Calls
Your Denon Globe Cruiser headphones feature integrated controls
and microphones for easy hands free phone conversations. The call
button on the left ear cup allows you to easily operate Bluetooth
compatible mobile phones once they’re paired with the headphones
(vpage 3 “Pairing with a Bluetooth device”).
Using the call waiting function
Use either of the following methods to take an incoming call while a
call is in progress.
NOTE
NOTE
The Bluetooth function will turn off automatically when a device is
connected using the audio cable, and calls using the headphones will
be disabled.
Call
button
コールボタン
Certain mobile phones may not support call waiting.
nnEnd the current call and take the new call
When another incoming call is detected while a call is in progress,
press the call button one time.
nnPut the current call on hold and take the new
call / switch to the on-hold call
Press and hold the call button for approx. 3 seconds.
Ignoring an incoming call
When an incoming call is detected, press and hold the call button for
approx. 3 seconds to ignore the call.
Making a call
There are 2 methods of making a phone call:
q dial the phone number manually using the paired mobile phone, or
w press the call button on the headphone once to use voice activated
call dialing. When you make a call, audio playback will be paused
temporarily until the call has been ended.
Answering an incoming call
Switching from headphones to the mobile
phone during a call
Press and hold the call button for approx. 5 seconds or more to switch
from talking through the headphones to talking on the mobile phone
itself.
NOTE
This switching is not possible during the call waiting function. In such
cases, the switching must be performed at the mobile phone.
When an incoming call is detected, you will hear the music pause and
a ringtone sound come over the headphones.
Press the call button once to answer the call.
Ending a call
To end a phone conversation, press the call button once. When the
call has ended, playback of the music that you’re listening to will
resume automatically.
6
Other operations
Incoming call
detected
In standby
mode / during
audio playback
Call in progress
Answer
Press call button once
Redial
Voice dial /
voiceactivated call
End call
Mute on/off
Press call button two times
Press call button one time
Press call button one time
Press call button two times
• Spin the control wheel to adjust the volume level of the other caller’s
voice.
• In order to make a call using the headphones, the connected
Bluetooth device must support either HSP (Headset Profile) or HFP
(Hands-Free Profile).z
• In order to make or answer a call during audio playback, the connected
Bluetooth device must support either HSP (Headset Profile) or HFP
(Hands-Free Profile), and must also support A2DP.z
zz Refer to the Bluetooth device’s owner’s manual for information on
supported Bluetooth profiles.
Additional Information
Airplane use
Overview of LED indicator display patterns
To use these headphones to listen to the on-board music broadcast in
the aircraft cabin, use the included audio cable and conversion plug.
Headphone status/function LED indicator display
Bluetooth on/off
Pairing in progress
Pairing standby mode
Pairing complete
Deleting pairing information
Receiving Bluetooth signal
Incoming phone call
Cable connection
Noise cancelling on/off
Battery level low
Battery charged 0% to 49%
Battery charged 55% to 99%
Battery charged 100%
Blue
NOTE
Red
• The conversion plug may not be suitable for certain aircraft.
• Do not use these headphones when the use of electronic devices
is prohibited on board, or when the use of personal headphones to
listen to the in-flight music services is prohibited.
Blue
Red
Blue
Red
Blue
Red
Blue
Red
Blue
Red
Blue
Red
Blue
Red
Blue
Red
Blue
Red
Blue
Red
Blue
Red
Blue
Red
7
Additional Information
Troubleshooting
Storing in the carrying case
Denon Globe Cruiser headphones have been engineered to provide superior audio performance and ease of use. If you encounter issues with
the operation of the headphones, please check below for answers to common issues.
Issue
Bluetooth function will not
turn on.
Cannot perform pairing.
Cannot establish Bluetooth
connection.
Remove the cable and plug, fold up the headphones and place them
in the case.
nnFor even more compact storage
Detach the ear pads as shown in the illustration, then close the
carrying case’s outer fastener.
Place the detached ear pads in the available space inside the case.
q
q
w
w
q
q
NOTE
Do not force the headphones into the case, as doing so may damage
them.
Proposed Solution
Relevant page
2
• Charge the battery by connecting the headphones to a computer using the included USB
cable.
3
• Bring the Bluetooth device to be connected and headphones closer together.
3, 4
• Confirm that the headphones’ Bluetooth function is turned on.
3
• Confirm that the Bluetooth device to be connected is turned on and its Bluetooth function is
activated.
–
• Confirm that the Bluetooth device to be connected is not in sleep mode.
3
• Pair devices again.
5
• If the headphones and Bluetooth device are connected using the audio cable, disconnect the
cable. The headphones’ Bluetooth function will turn off automatically when it is connected
using the audio cable.
4
Sound cannot be heard
• Confirm that the headphones’ Bluetooth function is turned on.
3, 4
through the headphones
• Confirm that the Bluetooth device to be connected is turned on and its Bluetooth function is
during Bluetooth
activated.
5
connection.
• Select the A2DP profile on the transmitting Bluetooth device.
Refer to the Bluetooth device’s owner’s manual for details.
–
• Confirm that the connected Bluetooth device’s audio playback has been initiated.
5
• Increase the volume level.
If necessary, increase the volume level on the connected Bluetooth audio device.
3
• Pair devices again.
5
Cannot operate connected • If the headphones and Bluetooth device are
Bluetooth device using connected using the audio cable, disconnect the
headphone controls.
cable. The headphones’ Bluetooth function will turn
off automatically when it is connected using the audio
cable.
–
• Reset the headphones by inserting a paperclip or similar
object into the hole behind the ear pad and pressing the
reset button inside. Reset the headphones by removing
the ear pad and then using a paperclip or similar object
Reset button
to press the reset button (see the figure on the right).
Even if you reset the headphones, pairing information
for the Bluetooth device will not be deleted.
6
Cannot hear caller’s voice • When listening to music using the headphones, press the call button to switch to call mode.
3, 4
during phone call.
• Confirm that the headphones’ Bluetooth function is turned on.
3, 4
• Confirm that the Bluetooth device to be connected is turned on and its Bluetooth function is
activated.
6
• Select the HSP or HFP profile on the transmitting Bluetooth device.
Refer to the Bluetooth device’s owner’s manual for details.
–
• Confirm that calls using the headphones are enabled on the connected Bluetooth device.
Refer to the Bluetooth device’s owner’s manual for details.
5
• Increase the call volume level.
–
• Increase the volume level on the connected Bluetooth-compatible mobile phone if necessary.
8
Additional Information
Precautions on use of the headphones
Trademark information
• Make sure to read the owner’s manual for the device to be connected
to the headphones.
• To avoid disturbing others around you, be aware of the headphones’
volume level when using public transportation or when in a public
place.
• This product does not guarantee successful operation of this product
together with all Bluetooth devices and mobile phones.
• This product does not support connection with all Bluetooth devices
and mobile phones.
• This product’s wireless Bluetooth technology has a transmission
range of approx. 10 meters, but interfering obstacles (people, metal
objects, walls, etc.), other radio signals, and other factors may affect
the transmission range.
• In order to connect via Bluetooth, the connected Bluetooth device
must support use of the same profiles as these headphones.
Refer to the Bluetooth device’s owner’s manual for information on
supported Bluetooth profiles.
• Due to the characteristics of Bluetooth wireless technology, there
will be a slight delay between sound/music transmitted from the
Bluetooth device and sound/music heard through the headphones.
This product uses the following technologies (Random order):
The Bluetooth® word mark and logos are registered trademarks
owned by Bluetooth SIG, Inc. and any use of such marks by D&M
Holdings Inc. is under license. Other trademarks and trade names
are those of their respective owners.
The CSR logo is a trademark of CSR plc or one of its group companies.
9
Product specifications
Supported Bluetooth
Bluetooth core specifications Ver. 3.0
specifications
Frequency band
2.4 GHz band
Frequency-hopping spread spectrum
Frequency hopping
(FHSS)
Transmission power Max. 2.5 mW (Class 2)
Approx. 10 m (varies according to usage
Transmission range
conditions)
A2DP (audio)
Supported Bluetooth AVRCP (audio control)
profiles
HSP (headset)
HFP (hands-free)
A2DP codec support AAC, aptX, SBC
Max. no. of registered
Max. 8 devices
pairings
Driver type
Dynamic type
Driver size
ø 40 mm
Input impedance
100 Ω (when power is on)
Playback frequency
5 to 37,000 Hz
Using Bluetooth and noise cancelling
Continuous playback functions: 10 hours
Using only Bluetooth function: 15 hours
time
Using only noise cancelling function: 25
hours
Continuous standby
Max. approx. 300 hours
time
Max. approx. 15 hours (when noise
Continuous call time
cancelling is off)
Operating
Temp.: 5 °C to 40 °C
temperature range
DC 3.7 V built-in rechargeable lithium
Power supply
polymer battery
Weight
305 g
www.denon.com
D&M Holdings Inc.
5411 10890 10AD
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising