ACTi SHM-100 Quick Installation guide

ACTi SHM-100 Quick Installation guide
Quick Installation Guide
SHM-100
Standalone System Health Management Server
V18.08.16
BEFORE YOU START
Thank you for purchasing ACTi Standalone System Health Management Server
(SHM). This guide contains all the information you need to quickly set up the
SHM system via local display interface.
The items below are required for installation:
• Monitor (with HDMI, DVI or DisplayPort input and the cable)
• USB mouse
• USB keyboard
• Network switch
• Network video recorder
1
UNPACK
This package includes the following items:
2
SHM Unit
Power Adapter
SATA Cable
Screws
Quick Installation Guide
Socket Converters
2
AT A GLANCE
FRONT PANEL
1
2
1
Power Button
2
USB 3.0 Ports x 2
REAR PANEL
1
2
3
6
7
4
8
5
9
1
Power Connector
5
Audio Output
2
DisplayPort
6
HDMI Port
3
LAN Ports x 2
7
USB 3.0 Ports x 4
4
COM Port x 2
(for RS-232)
8
DVI Connector
9
Audio Input
Quick Installation Guide
3
3
CONNECT THE DEVICE
The example below displays a local network consisting of an SHM server and
basic required peripherals to start using the device.
Network
Power Source
SHM
Network Video Recorders
USB Devices
HDMI Monitor
4
START UP
1. On the front panel, press the POWER BUTTON
to turn on the SHM.
2. On the Windows log on screen, type “123456”
to enter the Windows system.
NOTE: To assign a static IP address to the SHM, after entering
Windows operating system, configure the network settings in
Windows Network and Sharing Center.
4
Quick Installation Guide
5
OPEN FIREWALL OF NVR PORT
For security purposes, Windows Firewall is activated by default. In order to
connect to a Network Video Recorder (NVR) server, the firewall must be opened
for the specific NVR port.
1. Take note of the IP address and port number of
the NVR server that will be added to the SHM.
2. On Windows, search for “firewall”.
3. Select Windows Firewall with Advanced
Security.
4. Select Inbound Rules > New Rule...
5. On the pop-up, select the following to open the port firewall. Then click
“Finish.”
4
1
“Allow the connection”
“Port”
2
“TCP”
Select all
5
3
Type port
Type Rule Name
6
7
6. The new rule will then be added to the Inbound Rule list.
Quick Installation Guide
5
6
LOGIN
1. On Windows desktop, double-click the
icon to open the application interface.
System Health Management
2. Input the default account and password to log in.
Default Account and Password
Account: admin
Password: 123456
Understand the User Interface
Full Screen
Language
Main Menu
Menu List
Logout
Toolbar
Page
Minimize menu
Menu Options:
• Real-time Monitor: Shows the real-time status of the servers
• Real-time Monitor-eMap: Shows the device or server placement on the
e-map
• Event Search: Allows users to search and view the device status or event
filter
• Dashboard: View the graphical status of the servers on this page
• eMap Setting: Page to configure eMap
• Location Setting: Page to configure the server location
• Server Configuration: Page to configure servers
6
Quick Installation Guide
7
ADD LOCATION
Before adding the server, define first the possible server locations.
1. On the left menu panel, click Location Setting, then click Add new
Location.
2. Type the preferred Location Name; this
will be used in defining the location of
servers.
3. Type the Address and click Search to
mark the location on the map.
Information such as Latitude and
Longitude are automatically updated
based on the map location.
4. Click Save.
Repeat the above steps to add more locations.
The location will be shown on the Location Setting page.
Quick Installation Guide
7
8
ADD SERVER
The Server Configuration page allows users to add the server(s) to be
monitored through the SHM device.
1. On the left menu panel, click Server Configuration, then click Add new
server.
2. Select the server location from the
Location Name list. This location must
be configured first in the Location Setting
menu.
3. Type the server information.
4. Click Save.
Repeat the above steps to add more servers.
The server will be shown on the page.
Once a server is added, its event status will be shown on the Real-time Monitor
page.
8
Quick Installation Guide
9
SET eMAP
You can use the eMap feature to mark a camera or server to its location on the
map. The supported image files are PNG and JPEG.
1. On the left panel, click eMap Setting, then click Choose.
2. Using a USB thumb drive, search and upload the eMap file. The image
appears on the lower part of the page.
3. Select the server to display the device list.
4. Drag the server or a camera to the map to mark its position.
Once an eMap is added, users can view the map on the Real-time Monitor-eMap
page.
Quick Installation Guide
9
10 MONITOR STATUS
Monitoring can be done through the following pages:
Real-time Monitor
On the left menu panel, click Real-time Monitor to view the server status as
events happen in real-time.
Event list
Event notification pop-up
Event Search
On the left menu panel, click Event Search if you want to view the event log
by filtering the server, or a particular device or by the events that happened.
Specifying date range can also narrow down the search.
Fill up to filter the search results
10
Quick Installation Guide
Dashboard
On the left menu panel, click Dashboard to view the summarize graphical report
of events.
Note
If you have any question during the system installation, please feel free to contact our engineers via
ACTi Customer Help Desk platform at http://www.acti.com/CHD.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement