ACTi | PMAX-0203 ~ PMAX-0205 | Installation guide | ACTi PMAX-0203 ~ PMAX-0205 Installation Guide

ACTi PMAX-0203 ~ PMAX-0205 Installation Guide
Outdoor Housing Quick Installation Guide
PACKAGE C ONTENTS
The carton should contain the following items:
Housing
Bracket
Screw Pack
If any item is missing or damaged, please contact your local reseller for replacement.
Note:


The images in this Quick Installation Guide are for reference only. Actual housing and cameras may vary.
This installation should be completed by a qualified installer and should conform to all local codes and regulations.
PARTS O VERVIEW
Depending on the model, the housing can either be with or without heater or fan.
Housing
M OUNTING
THE
Housing with Heater and Fan
C AMERA
1. Remove the camera sled from the housing.
2. Mount the camera to the sled using the bundled screw.
-1-
3. Attach the camera sled back to the housing, slide and tighten the screws to fix its position.
M OUNTING
THE
H OUSING
AND
B RACKET
1. Attach the bracket using the bundled allen wrench screwdriver.
2. Loosen the bracket allen screw, adjust the tilt and pan of the housing, then tighten the allen screw to fix its
position.
Note: For detailed installation instructions, please refer to the Installation Guide in our website.
-2-
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising