GAS-FIRED INSTALLATION INSTRUCTIONS DECORATIVE FIREPLACE DOOR: DDF36CCPD-1 DDF40CPD-1 FOR USE ON DVCT36 SERIES FIREPLACES NOTE: Remove any fasteners securing the doors to the frame before installation (if applicable). 1. FOR USE ON DVCT40 SERIES FIREPLACES 3. Reattach doors removed in Step 1. See Figure 3. Lift and remove both doors from the frame. See Figure 1. Figure 3 Figure 1 2. Hang the decorative frame onto the glass frame over the barrier screen so the notches hang on the four screws. See Figure 2. Figure 2 37148-1-1116 Empire Comfort Systems Inc. • Belleville, IL Page 1
* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project
advertisement