American Hearth | Boulevard 60 & 72 Decorative Fronts | Owner Manual | American Hearth Boulevard 60 & 72 Decorative Fronts Owner Manual

American Hearth Boulevard 60 & 72 Decorative Fronts Owner Manual
Decorative Front Kits
for Use on VFLL60FP90L(N,P)-1
DFL601BL-1 (Black)
DFL602BL-1 (Black)
DFL602NB-1 (Brushed Nickel)
Decorative Front Kits
for Use on VFLL72FP90L(N,P)-1
DFL721BL-1 (Black)
DFL722BL-1 (Black)
DFL722NB-1 (Brushed Nickel)
LEAVE INSTRUCTIONS WITH THE OWNER AFTER INSTALLATION.
1.
For installation of the DFL601BL, DFL602BL, DFL721BL,
and DFL722BL kits, 1/2-inch unfinished space is required
on both sides of the fireplace opening .
1/2”
2.
If applicable, remove glass front from fireplace by lifting the
glass front up, sliding it to the right, and then carefully angle
left side out of the slots. See Figure 1.
1/2”
For installation of the DFL602NB & DFL722NB kits, 7/8-inch
unfinished space is required on all four sides of the fireplace
opening.
7/8”
7/8”
7/8”
7/8”
TOP VIEW
GLASS
Figure 1
36848-1-0716
Page 1
3.
Remove the inner firebox top by removing five Phillips Truss
Head Screws. See Figure 2.
5.
Reinstall the inner firebox top and five screws removed in
Step 3. See Figure 4.
Figure 2
4.
Insert trim tabs into the slots on either side of the fireplace
opening. Position until the trim touches the finishing material
around the fireplace opening.
Figure 4
6.
Replace the glass front into the fireplace by reversing the
steps in step 2.
Figure 3
Empire Comfort Systems Inc.
Belleville, IL
If you have a general question about our products, please e-mail us at info@empirecomfort.com.
If you have a service or repair question, please contact your dealer.
www.empirecomfort.com
Page 2
36848-1-0716
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising