Central Machinery | 1500 Watt Steam Cleaner Kit | Owner Manual | Central Machinery 1500 Watt Steam Cleaner Kit Owner Manual

Central Machinery 1500 Watt Steam Cleaner Kit Owner Manual
Owner’s Manual & Safety Instructions
Save This Manual Keep this manual for the safety warnings and precautions, assembly,
operating, inspection, maintenance and cleaning procedures. Write the product’s serial number in the
back of the manual near the assembly diagram (or month and year of purchase if product has no number).
Keep this manual and the receipt in a safe and dry place for future reference.
REV 16b
Visit our website at: http://www.harborfreight.com
Email our technical support at: productsupport@harborfreight.com
When unpacking, make sure that the product is intact
and undamaged. If any parts are missing or broken,
please call 1-888-866-5797 as soon as possible.
Copyright© 2015 by Harbor Freight Tools®. All rights reserved.
No portion of this manual or any artwork contained herein may be reproduced in
any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein.
Tools required for assembly and service may not be included.
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
Table of Contents
Safety
Safetye��������������������������������������������������������� 2
Specifications.............................................. 4
Setup........................................................... 5
Operationa���������������������������������������������������� 6
Maintenancei���������������������������������������������� 11
Parts List and Diagram............................... 14
Warranty..................................................... 16
WARNING SYMBOLS AND DEFINITIONS
This is the safety alert symbol. It is used to alert you to potential
personal injury hazards. Obey all safety messages that
follow this symbol to avoid possible injury or death.
Indicates a hazardous situation which, if not avoided,
will result in death or serious injury.
Indicates a hazardous situation which, if not avoided,
could result in death or serious injury.
Setup
Indicates a hazardous situation which, if not avoided,
could result in minor or moderate injury.
Addresses practices not related to personal injury.
Instructions Pertaining to a Risk of Fire, Electric Shock, or Injury to Persons
IMPORTANT SAFETY INSTRUCTIONS
Operation
When using an electrical appliance, basic precautions should always be followed, including the following:
READ ALL INSTRUCTIONS BEFORE USING THIS APPLIANCE
To reduce the risk of burns, fire, electric shock, or injury:
1. Do not leave appliance when plugged in. Unplug
from outlet when not in use and before servicing.
2. Unplug from outlet and allow to cool completely
before opening tank or adding water to tank.
3. Do not touch steam nozzle or accessories or
connect accessories while unit is plugged in.
Maintenance
4. Only use water, do not use cleaning agents,
they could cause injury or damage.
5. Use only on flat, level surface.
6. Do not allow children to use this item
or use it near children. Not a toy.
7. Use only as described in this manual. Use only
manufacturer’s recommended attachments.
8. Do not use with damaged cord or plug.
If appliance is not working as it should, has been
dropped, damaged, left outdoors, or dropped
into water, return it to a service center.
9. Do not pull or carry by cord, use cord as a handle,
close a door on cord, or pull cord around sharp
edges or corners. Do not run appliance over cord.
Keep cord away from heated surfaces.
10. Do not unplug by pulling on cord.
To unplug, grasp the plug, not the cord.
11. Do not handle plug or appliance with wet hands.
12. Not for space heating purposes.
13. Turn off all controls before unplugging.
14. Use extra care when cleaning on stairs.
15. Connect to a properly grounded outlet only.
See Grounding Instructions.
Page 2
For technical questions, please call 1-888-866-5797.
Item 63042
18. Do not point nozzle toward body,
other people, animals or plants.
19. Do not point nozzle toward electrical outlets.
20. Do not operate without water in the tank.
21. Stay alert, watch what you are doing and use
common sense when operating an appliance.
Do not use an appliance while you are tired or under
the influence of drugs, alcohol or medication.
A moment of inattention while operating
appliances may result in serious personal injury.
22. Maintain labels and nameplates
on the appliance. These carry important safety
information. If unreadable or missing, contact
Harbor Freight Tools for a replacement.
23. WARNING: Some dust created by power sanding,
sawing, grinding, drilling, and other construction
activities, contains chemicals known to the State
of California to cause cancer and birth defects or
other reproductive harm. Some examples of these
chemicals are:
• Lead from lead-based paints
• Crystalline silica from bricks and cement or other
masonry products
24. WARNING: The brass components of this product
contain lead, a chemical known to the State
of California to cause cancer and birth defects
or other reproductive harm. (California Health
& Safety Code § 25249.5, et seq.)
25. WARNING: The cord of this product contains
lead and/or di (2-ethylhexyl) phthalate (DEHP),
chemicals known to the State of California
to cause cancer, and birth defects or other
reproductive harm. Wash hands after handling.
(California Health & Safety Code § 25249.5, et seq.)
26. The warnings, precautions, and instructions
discussed in this instruction manual cannot cover all
possible conditions and situations that may occur.
It must be understood by the operator that
common sense and caution are factors
which cannot be built into this product,
but must be supplied by the operator.
Safety
17. Do not immerse in liquid.
• Arsenic and chromium from chemically treated
lumber
Your risk from these exposures varies, depending
on how often you do this type of work. To reduce
your exposure to these chemicals: work in a well
ventilated area, and work with approved safety
equipment, such as those dust masks that are
specially designed to filter out microscopic particles.
(California Health & Safety Code § 25249.5, et seq.)
Setup
16. FOR HOUSEHOLD USE ONLY.
Grounding Instructions
This appliance must be grounded. If it should malfunction or breakdown, grounding provides a path of
least resistance for electric current to reduce the risk of electric shock. This appliance is equipped with a
cord having an equipment-grounding conductor and grounding plug. The plug must be inserted into an
appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances.
Operation
SAVE THESE INSTRUCTIONS
This appliance is for use on a nominal 120‑V circuit
and has a grounding attachment plug that looks like the
plug illustrated in 125VAC 3-Prong Plug and Outlet.
Make sure that the appliance is connected to an
outlet having the same configuration as the plug.
No adaptor should be used with this appliance.
Maintenance
Improper connection of the equipment-grounding conductor can result in a risk of
electric shock. Check with a qualified electrician or service person if you are in doubt as to
whether the outlet is properly grounded. Do not modify the plug provided with the appliance –
if it will not fit the outlet, have a proper outlet installed by a qualified electrician.
Grounding
Pin
125VAC 3-Prong Plug and Outlet
(for up to 125VAC and up to 15A)
Item 63042
For technical questions, please call 1-888-866-5797.
Page 3
Specifications
Electrical Rating
120VAC / 60Hz / 12.5A
Maximum Temperature
221º F
Safety
3140075
Setup
Operation
Maintenance
Page 4
For technical questions, please call 1-888-866-5797.
Item 63042
Setup - Before Use:
Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this
manual including all text under subheadings therein before set up or use of this product.
Green
Power
Light
Tank
Cap
Safety
Components and Controls
Floor Brush
Holder
(on back)
Power
Switch
(on back)
Red
Steam
Light
Off
Setup
On
Trigger
Lock
Trigger
Nozzle
Floor
Brush
Extension
Tubes
Floor
Cloth
Operation
Hose
Squeegee
Adapter
Upholstery
Brush
Small
Brushes
Item 63042
Brass
Brush
Large
Brushes
Scrubber
Jet
For technical questions, please call 1-888-866-5797.
Page 5
Maintenance
Window
Attachment
Operating Instructions
Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this
manual including all text under subheadings therein before set up or use of this product.
Safety
TO PREVENT SERIOUS INJURY FROM ACCIDENTAL OPERATION:
Turn the Switch off and unplug the power cord from its electrical outlet
before changing attachments or filling tank.
Filling Tank
WARNING! To prevent steam
burns when filling tank:
NOTICE: To prevent damage to Steam Cleaner,
use distilled water, do not add chemicals
to water, and do not overfill tank.
1. Turn off and unplug unit, then
let unit cool for 20 minutes.
6. Place Funnel in Fill Port, then pour
distilled water in Funnel.
Setup
2. After unit has cooled, press and hold
Trigger to release residual steam
pressure before removing Tank Cap.
3. Remove Tank Cap by pushing and holding
Cap down while turning counterclockwise.
7. Replace Tank Cap by pushing and
holding Cap down while turning
clockwise until tightened securely.
Operation
4. Empty remaining water from Tank.
5. Fill the Measuring Cup with distilled water
no higher than the 27 oz (800 ml) mark.
27
oz
Maintenance
Page 6
For technical questions, please call 1-888-866-5797.
Item 63042
Steam Cleaning
Safety
WARNING! POINT STEAM AWAY FROM PEOPLE, ANIMALS, PLANTS AND ELECTRICAL OUTLETS.
To prevent steam burns when changing attachments, turn off and unplug unit,
then let unit cool for 20 minutes. After unit has cooled, press and hold Trigger
to release residual steam pressure before removing attachments.
NOTICE: To prevent damage to Steam Cleaner, avoid putting excessive pressure
on attachments, let the Steam Cleaner do the work. To prevent damage to surfaces,
perform a spot test on an inconspicuous area before steaming any surface.
Note: Steam Cleaner is equipped with thermal overload protection. If unit overheats,
it will automatically switch off. If this happens, unplug unit and let cool for 20
minutes, fill tank as necessary, then plug back in and resume steaming.
CAUTION! Do not operate Steam
Cleaner without water in the Tank.
5. Green Power Light and red Steam Light
will come on. When red Steam Light
goes out, unit is ready to use.
2. Make sure Power Switch is in the OFF (O) position,
unit is unplugged, and Trigger Lock is engaged.
To engage Trigger Lock, release Trigger, then
push left side of lock until it is flush with housing.
Trigger Lock is engaged when Trigger cannot move.
Trigger
Lock
Note: Water spattering from
attachment at startup is normal.
6. Disengage Trigger Lock, then press Trigger to
begin steaming. Keep Steam Cleaner moving
to avoid oversaturating any one area.
7. To sanitize hard surfaces, hold attachment
1/2" from surface for 5 seconds.
Setup
1. Dust, sweep and/or vacuum
surface before steaming.
8. Wipe surfaces with a cloth after steaming.
Steam loosens dirt, but does not remove it.
CAUTION! To prevent burn injuries, allow
surfaces to cool before wiping them.
3. Connect attachment(s) appropriate for job. See
Connecting Attachments, starting on page 8.
CAUTION! Do not steam clean
without an attachment.
Operation
Note: Tank will need to be refilled
when steam flow decreases.
9. When finished, turn Power Switch to the
OFF (O) position and unplug unit from outlet.
10. Let unit cool for 20 minutes, then clean
and store according to User-Maintenance
and Storage on page 11.
Maintenance
4. Plug Steam Cleaner into dedicated
120V outlet and press Power Switch
on back of unit to ON position (I).
Item 63042
For technical questions, please call 1-888-866-5797.
Page 7
connecting Attachments
Floor Brush - Hard Floors, carpets and Rugs
SAFETy
NOTIcE: Consult floor/carpet manufacturer′s instructions before steam cleaning.
Do not use on painted surfaces. Do not use on unsealed, polished or waxed surfaces.
1. Floor Brush is packed separately from its
Handle. Insert Handle into Floor Brush as
shown below. Push all the way in, then
twist Handle up to its normal position.
3. carpets and Rugs: Attach Floor
Brush to Extension Tube.
Line up hole in Floor Brush with lock button
on Extension Tube and push together
until Floor Brush clicks into place.
Floor
Brush
Handle
SETUp
2. Attach one or both Extension Tubes to Nozzle:
Line up hole in Extension Tube with lock
button on Nozzle and push together until
Extension Tube clicks into place.
Nozzle
4. Hard Floors: Attach Floor Brush
with Cloth to Extension Tube.
To attach Cloth, lay Floor Brush over Cloth,
push down on clamps, tuck the ends of Cloth
under clamps, then release clamps.
Lock
Button
Floor Brush
with cloth
clamp
OpERATION
Hole
Extension
Tube
cAUTION! To prevent burn injury, wait until cloth
has cooled before removing from Floor Brush.
Note: Floor Brush may be stored on
holder located on back of Unit.
MAINTENANcE
Page 8
For technical questions, please call 1-888-866-5797.
Item 63042
Window Attachment - Windows, Shower Doors, Mirrors, Oven Doors and Tile
cAUTION! IN cOLD WEATHER, GLASS MAy BREAK DUE TO THERMAL SHOcK!
To prevent injuries from broken glass, DO NOT place attachment directly on glass.
Warm the glass from a distance of 1 foot, then release Trigger and squeegee water away.
2. Attach Squeegee to Window Attachment:
a. Place Squeegee hooks through
tabs on Window Attachment.
b. Pull Squeegee up until lock latches
onto Window Attachment.
3. Slide Window Attachment handle onto
Adapter, with hole facing left. Turn Adapter
1/4 turn clockwise until hole is facing up.
Window
Attachment
Handle
Adapter
Hole
Lock
Hole
4. Line up hole in Adapter with lock button
on Nozzle or Extension Tube and push
together until Adapter clicks into place.
SETUp
Window
Attachment
Tab
SAFETy
1. Attach one or both Extension Tubes
to Nozzle if needed.
Squeegee
Hook
Brass Brush - Oven Racks and BBQ Grills
Nozzle
NOTE: Remove racks from oven before steaming.
1. Attach Adapter to Nozzle:
cAUTION! To prevent injury, wear heavy-duty
work gloves when attaching Brass Brush.
2. Slide Brass Brush onto Adapter as far as possible.
NOTIcE: Brass Brush may scratch some
surfaces, such as stainless steel appliances.
OpERATION
Lock
Button
Line up hole in Adapter with lock button
on Nozzle or Extension Tube and push
together until Adapter clicks into place.
Hole
Adapter
MAINTENANcE
Brass
Brush
Item 63042
For technical questions, please call 1-888-866-5797.
Page 9
Upholstery Brush - Fabric, Upholstery, Curtains, Pillows and Mattresses
NOTICE: Consult fabric manufacturer′s instructions before steam cleaning.
Do not use on leather, synthetic fabrics, velvet, acrylic or delicate fabrics.
Nozzle
Safety
1. Attach one or both Extension
Tubes to Nozzle if needed.
2. Line up hole in Upholstery Brush with lock button
on Nozzle or Extension Tube and push together
until Upholstery Brush clicks into place.
Lock
Button
Hole
Upholstery
Brush
Countertops, Stoves, Ovens, Sinks, Toilets, Grout and Tight Spaces
Setup
Nozzle
1. Attach one or both Extension
Tubes to Nozzle if needed.
2. Attach Adapter to Nozzle or Extension Tube:
Lock
Button
Line up hole in Adapter with lock button
on Nozzle or Extension Tube and push
together until Adapter clicks into place.
Hole
3. Slide attachment onto Adapter as far as possible:
a. Large Nylon Brush: Loosens
dirt from hard surfaces.
Adapter
Operation
b. Small Nylon Brush: Cleans grout.
c. Scrubber: Removes tough dirt and scuffs.
NOTICE: Scrubber may scratch some surfaces,
such as stainless steel appliances.
d. Jet: Concentrates steam into tight spaces.
Nylon
Brushes
Scrubber
Jet
Maintenance
Page 10
For technical questions, please call 1-888-866-5797.
Item 63042
User-Maintenance and Storage
Safety
Procedures not specifically explained in this manual must
be performed only by a qualified technician.
TO PREVENT SERIOUS INJURY FROM ACCIDENTAL OPERATION:
Turn the Power Switch of the appliance off and unplug the appliance from its
electrical outlet before performing any procedure in this section.
TO PREVENT SERIOUS INJURY FROM APPLIANCE FAILURE:
Do not use damaged equipment. If abnormal noise or vibration
occurs, have the problem corrected before further use.
Cleaning, Maintenance, and Lubrication
1. BEFORE EACH USE, inspect the
general condition of the appliance. Check for:
• loose hardware,
e. Wipe external surfaces with clean, damp cloth.
• misalignment or binding of moving parts,
f. Store in an indoor dry area out
of reach of children.
• cracked or broken parts,
• any other condition that may
affect its safe operation.
3. EVERY 3 - 6 MONTHS, depending on
water hardness, descale the tank:
a. Use limescale remover or equal
parts vinegar and water.
2. AFTER EVERY USE:
b. Let solution sit in tank for 30 minutes,
empty tank and rinse with water.
a. After unit has cooled for 20 minutes, press and
hold Trigger to release residual steam pressure.
c. Repeat as necessary.
b. Remove attachments and rinse them
with water. Allow them to dry.
4.
WARNING! If the supply cord of this
appliance is damaged, it must be replaced
only by a qualified service technician.
Maintenance
c. Empty tank, rinse with water, and allow
tank to dry before replacing cap.
d. Allow tank to dry before replacing cap.
Operation
• damaged electrical wiring, and
Setup
d. Wash Cloth separately in warm or hot water, then
tumble or air dry. Do not use fabric softener.
Item 63042
For technical questions, please call 1-888-866-5797.
Page 11
Troubleshooting
Problem
Safety
Unit will not heat
up. Power light
does not come on.
Possible Causes
1. Cord not connected.
2. No power at outlet.
3. Unit’s thermal overload tripped.
Steam output
is weak.
Excessive water
in steam.
4. Internal damage or wear.
1. Water level is low.
2. Mineral build up in tank.
1. Tank overfilled.
2. Unit not heated fully.
Likely Solutions
1. Check that cord is plugged in.
2. Check power at outlet. If outlet is unpowered,
turn off Unit and check circuit breaker.
If breaker is tripped, make sure circuit is right
capacity for Unit and circuit has no other loads.
3. Unplug Unit and allow to cool for 20 minutes.
After cooled, plug in Unit and continue use.
4. Have technician service Unit.
1. Refill according to Note: Tank will need to
be refilled when steam flow decreases.
See Filling Tank on page 6.
2. Descale tank according to Cleaning,
Maintenance, and Lubrication on page 11.
1. Fill tank according to Filling Tank on page 6.
Only use included measuring cup to fill tank.
2. Wait until Steam Light goes out.
Setup
Follow all safety precautions whenever diagnosing or servicing the appliance.
Disconnect power supply before service.
Operation
Maintenance
Page 12
For technical questions, please call 1-888-866-5797.
Item 63042
Maintenance
Operation
Setup
THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLY DIAGRAM
IN THIS MANUAL AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER OR DISTRIBUTOR
MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE IS
QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT, OR THAT HE OR SHE IS QUALIFIED TO REPLACE
ANY PARTS OF THE PRODUCT. IN FACT, THE MANUFACTURER AND/OR DISTRIBUTOR EXPRESSLY
STATES THAT ALL REPAIRS AND PARTS REPLACEMENTS SHOULD BE UNDERTAKEN BY CERTIFIED AND
LICENSED TECHNICIANS, AND NOT BY THE BUYER. THE BUYER ASSUMES ALL RISK AND LIABILITY
ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS
THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO.
Safety
PLEASE READ THE FOLLOWING CAREFULLY
Item 63042
For technical questions, please call 1-888-866-5797.
Page 13
Parts List and Diagram
Parts List
Safety
Part
Setup
1
2
3
4
5
6
7
9
10
11
12
13
14
15
16
17
18
19
20
Description
Tank Cap
Spring
Core
Cover
Copper Ring
Sealing Ring
Sealing Ring
Top Housing
Silica Gel (13x20)
Steam Outlet
Screw (M5x30)
Tank Top Housing
Gasket
Tank Bottom Housing
Thermostat
Nut (M5)
Silica Gel (13x25)
Back Housing
Nozzle
Qty
1
1
1
1
1
1
1
1
1
1
5
1
1
1
1
5
5
1
1
Part
21
22
25
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
Description
Sealing Ring - Small
Sealing Ring - Large
Handle Left Housing
Handle Right Housing
Trigger
Trigger Lock
Threaded Pipe
Inner Pipe
Wheel Cover
Outer Wheel
Inner Wheel
Bottom Housing
Swivel Wheel Shaft
Swivel Wheel Housing
Swivel Wheel
Hose
Measuring Cup
Funnel
Qty
1
1
1
1
1
1
1
1
2
2
2
1
1
1
1
1
1
1
Operation
Maintenance
Record Product’s Serial Number Here:
Note: If product has no serial number, record month and year of purchase instead.
Note: Some parts are listed and shown for illustration purposes only,
and are not available individually as replacement parts.
Page 14
For technical questions, please call 1-888-866-5797.
Item 63042
Assembly Diagram
1
2
Safety
9
10
3
11
4
12
5
6
7
25
Setup
13
14
29
15
28
30 31 32 33
27
35
17
Operation
22
21
20
16
18
19
40
41
Maintenance
34
36
37
38
Item 63042
For technical questions, please call 1-888-866-5797.
Page 15
Limited 90 Day Warranty
Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards,
and warrants to the original purchaser that this product is free from defects in materials and workmanship for the
period of 90 days from the date of purchase. This warranty does not apply to damage due directly or indirectly,
to misuse, abuse, negligence or accidents, repairs or alterations outside our facilities, criminal activity, improper
installation, normal wear and tear, or to lack of maintenance. We shall in no event be liable for death, injuries
to persons or property, or for incidental, contingent, special or consequential damages arising from the use of
our product. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the
above limitation of exclusion may not apply to you. THIS WARRANTY IS EXPRESSLY IN LIEU OF ALL OTHER
WARRANTIES, EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS.
To take advantage of this warranty, the product or part must be returned to us with transportation charges
prepaid. Proof of purchase date and an explanation of the complaint must accompany the merchandise.
If our inspection verifies the defect, we will either repair or replace the product at our election or we may
elect to refund the purchase price if we cannot readily and quickly provide you with a replacement. We will
return repaired products at our expense, but if we determine there is no defect, or that the defect resulted
from causes not within the scope of our warranty, then you must bear the cost of returning the product.
This warranty gives you specific legal rights and you may also have other rights which vary from state to state.
3491 Mission Oaks Blvd. • PO Box 6009 • Camarillo, CA 93011 • 1-888-866-5797
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising