Dji | GO 4 | Guide | dji GO 4 User guide

dji GO 4 User guide
How to Update the Firmware of Phantom 4 Pro+ Remote Controller
1.
Visit the official DJI website and go to the Phantom 4 Pro/Pro+ page, download the latest firmware
package.
2.
Extract the firmware package, and copy the extracted file (GL300E_RC_xxx.bin) to a Micro SD card.
3.
Insert the Micro SD card into the Micro SD card slot of the Remote Controller.
4.
Power on the Remote Controller, enter System Settings > System Update, click Local Update on the
top-right corner. The latest firmware will show on Micro SD card. Click Update to start updating.
Notes:
 DO NOT insert the Micro SD card to a card reader and use the USB port of the Remote Controller to
update.
http://www.dji.com/phantom-4-pro
Copyright © 2017 DJI All Rights Reserved.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising