NAD | C 556 | Data Sheet | NAD C 556 Turntable Datasheet

NAD C 556 Turntable Datasheet
C 556 Turntable
Time to enjoy vinyl collections with extraordinary quality and NAD sound! With a minimalist design, our C 556 Turntable
offers accurate reproduction of vinyl music by using performance-focused parts and components that put music first.
Simply connect our C 556 to your NAD amplifier, set the balance weight, and discover your inner ‘vinyl’ with rich and
authentic sounds that would typically be heard from a turntable costing far more.
Features
> Keep it Simple
Improving upon past designs, our newest turntable
presents vinyl lovers with a simple collection of high
quality parts. With a precision main bearing and low
vibration motor, the C 556 will reduce speed variations,
and with assistance from other key components,
minimise the amount of data lost through absorption as
you play your favourite LP.
> Audible Precision
By reducing the size and number of mechanical joints in
our newly designed hand-assembled tonearm, energyabsorbing mass is kept at a minimum. Less mass allows
the C 556’s tonearm to accurately track vinyl records
and limit the amount of perceptible distortion. You’ll
love how this makes your vinyl collection more nuanced
and dynamic.
> Solid Foundation
With our compression moulded Phenolic Resin platter,
listen to all of your favourite vinyl records without a glitch
in quality or performance. Phenolic Resin is one of the
hardest and stiffest plastic materials ever made, giving
the C 556’s platter improved flywheel effect, excellent
stability, and reduced speed variations.
> Tailored Speed
To further reduce speed inconsistencies and wear on
the drive belt, you can modify and change the playing
speed of your vinyl records. By removing the platter, you
can move the belt to either the 33 or 45rpm wheel of the
drive pulley to attain the correct pitch of a musical track.
Features and Specifications
TURNTABLE
Drive System
Motor
Speed
Suspension System
TONEARM
Operation
Length
Effective Mass
Overhang
Cable capacitance
CARTRIDGE SPECIFICATION
Output voltage
Tracking Force Recommended
Cartridge Weight
Replacement Stylus
PHYSICAL SPECIFICATIONS
C 556
Belt drive
High torque synchronous
33.3 and 45.1rpm
3 energy absorbent synthetic rubber feet
Manual
289mm total length; 244 mm pivot to stylus
9g
19.1mm
150-400pF
2.5mV at 1kHz
2-3g
5g
User replaceable
Dimensions (W x H x D) Gross* (with dust cover down)
447 x 115 x 360mm
17 3/8 x 4 9/16 x 14 3/16” **
Net Weight
Shipping Weight
4kg (8.8lbs)
7kg (15.4lbs)
* Gross dimensions include feet, extended buttons and rear panel terminals.
** Non-metric measurements are approximate. NAD Electronics will not assume any liability for errors being made by retailers, custom
installers, cabinet makers, or other end users based on information contained in this document.
Note: Installers should allow a minimum clearance of 55mm for wire/cable management.
NAD Electronics International reserves the right to change specifications or features without notice. NAD is a registered trademark of NAD Electronics
International. All rights reserved. No part of this publication may be reproduced, stored, or transmitted in any form whatsoever without the written
permission of NAD Electronics International. © 12/17 15-004 NAD Electronics International.
www.NADelectronics.com
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising