ESAB | Mig U5000i/5000iw WeldCloud™ | Declaration of Conformity | ESAB Mig U5000i/5000iw WeldCloud™ Declaratie de conformitate

ESAB Mig U5000i/5000iw WeldCloud™ Declaratie de conformitate
EU DECLARATION OF CONFORMITY
According to
The Radio Equipment Directive 2014/53/EU, entering into force 13 June 2016
The RoHS Directive 2011/65/EU, entering into force 2 January 2013
Type of equipment
Welding Power Source
Type designation
Mig 5000i/5000iw WeldCloud
Mig U5000i/U5000iw WeldCloud
from serial number 626-xxx-xxxx (2016 w/26)
from serial number 626-xxx-xxxx (2016 w/26)
Brand name or trade mark
ESAB
Manufacturer or his authorised representative established within the EEA
Name, address, and telephone No:
ESAB AB
Lindholmsallén 9, Box 8004, SE-402 77 Göteborg, Sweden
Phone: +46 31 50 90 00, Fax: +46 31 50 92 22
The following harmonised standard in force within the EEA has been used in the design:
EN 303 446-2 ElectroMagnetic Compatibility (EMC) standard for combined and/or integrated radio and
non-radio equipment; Part 2: Specific conditions for equipment intended to be used in industrial locations.
EN 301 489-1 V2.2.0 Part 1: Common technical requirements
EN 301 489-17 V3.2.0 Part 17: Specific conditions for Broadband Data Transmition Systems
EN 301 489-19 V2.1.0 Part 19: Specific conditions for GPS
EN 301 489-52 V1.1.0 Part 52: Specific conditions for Cellular Communication
Additional Information:
Restrictive use, Class A equipment, intended for use in location other than residential
By signing this document, the undersigned declares as manufacturer, or the manufacturer’s
authorised representative established within the EEA, that the equipment in question complies
with the safety requirements stated above.
Date
Signature
Gothenburg
2017-09-27
2017
Position
Global Director Equipment
Stephen Argo
BG
ЕС ДЕКЛАРАЦИЯ ЗА СЪОТВЕТСТВИЕ
Съгласно
ДИРЕКТИВА 2014/53/ЕС НА ЕВРОПЕЙСКИЯ ПАРЛАМЕНТ И НА СЪВЕТА от 16 април 2014 година
Директивата за ограничение на опасните вещества (RoHS) 2011/65/ЕС, влязла в сила от 2 януари 2013 г.
Вид оборудване
Заваръчен захранващ източник
Вид предназначение
Mig 5000i/5000iw WeldCloud, от сериен номер 626-xxx-xxxx (2016 w/26)
Mig U5000i/U5000iw WeldCloud, от сериен номер 626-xxx-xxxx (2016 w/26)
Търговско наименование или търговска марка
ESAB
Производител или негов упълномощен представител, учреден в рамките на ЕИП
Име, адрес и телефонен номер:
ESAB AB
Lindholmsallen 9, Box 8004, SE-402 77 Goteborg, Sweden
Телефон: +46 31 50 90 00, Факс: +46 31 50 92 22
При създаването е използван следният хармонизиран стандарт, който е в сила в рамките на ЕИП:
EN 303 446-2 ElectroMagnetic Compatibility (EMC) standard for combined and/or integrated radio and non-radio equipment;
Part 2: Specific conditions for equipment intended to be used in industrial locations.
EN 301 489-1 V2.2.0 Part 1: Common technical requirements
EN 301 489-17 V3.2.0 Part 17: Specific conditions for Broadband Data Transmition Systems
EN 301 489-19 V2.1.0 Part 19: Specific conditions for GPS
EN 301 489-52 V1.1.0 Part 52: Specific conditions for Cellular Communication
Допълнителна информация:
Ограничена употреба, оборудване от клас A, предназначено за употреба на място, различно от жилищно помещение
Като подписва настоящия документ, долуподписаният декларира в качеството си на производител или
упълномощен представител на производителя, учреден в рамките на ЕИП, че съответното оборудване
отговаря на посочените по-горе изисквания за безопасност.
Дата
Подпис
Главен директор по
оборудването
Gothenburg
2017-09-27
Stephen Argo
2017
Длъжност
CZ
EU PROHLÁŠENÍ O SHODĚ
Podle
SMĚRNICE 2014/53/EU EVROPSKÉHO PARLAMENTU A RADY ze dne 16. dubna 2014
Směrnice RoHS 2011/65/EU, která platí od 2. ledna 2013
Typ zařízení
Napájecí zdroj pro svařování
Typové označení
Mig 5000i/5000iw WeldCloud, od sériového čísla 626-xxx-xxxx (2016 w/26)
Mig U5000i/U5000iw WeldCloud, od sériového čísla 626-xxx-xxxx (2016 w/26)
Název nebo obchodní značka
ESAB
Výrobce nebo autorizovaný zástupce v EHP
Jméno, adresa a telefon:
ESAB AB
Lindholmsallen 9, Box 8004, SE-402 77 Goteborg, Sweden
Telefon: +46 31 50 90 00, Fax: +46 31 50 92 22
Design využívá následující harmonizované standardy platné v rámci EHP:
EN 303 446-2 ElectroMagnetic Compatibility (EMC) standard for combined and/or integrated radio and non-radio equipment;
Part 2: Specific conditions for equipment intended to be used in industrial locations.
EN 301 489-1 V2.2.0 Part 1: Common technical requirements
EN 301 489-17 V3.2.0 Part 17: Specific conditions for Broadband Data Transmition Systems
EN 301 489-19 V2.1.0 Part 19: Specific conditions for GPS
EN 301 489-52 V1.1.0 Part 52: Specific conditions for Cellular Communication
Další informace:
Restriktivní použití, vybavení třídy A, určeno pro používání v jiných než obytných oblastech
Podepsáním tohoto dokumentu podepsaný jako výrobce nebo autorizovaný zástupce výrobce v EHP prohlašuje, že
toto zařízení splňuje výše uvedené bezpečnostní požadavky.
Datum
Podpis
Global Director Equipment
Gothenburg
2017-09-27
Stephen Argo
2017
Pracovní pozice
DE
EU-KONFORMITÄTSERKLÄRUNG
Gemäß
RICHTLINIE 2014/53/EU DES EUROPÄISCHEN PARLAMENTS UND DES RATES vom 16. April 2014
Der RoHS-Richtlinie 2011/65/EU, in Kraft ab 2. Januar 2013
Ausrüstungstyp
Schweißstromquelle
Typenbezeichnung
Mig 5000i/5000iw WeldCloud, ab Seriennummer 626-xxx-xxxx (2016 w/26)
Mig U5000i/U5000iw WeldCloud, ab Seriennummer 626-xxx-xxxx (2016 w/26)
Markenname oder Handelszeichen
ESAB
Hersteller oder sein im europäischen Wirtschaftsraum zuständiger Vertreter mit entsprechenden Berechtigungen
Name, Adresse und Telefonnummer:
ESAB AB
Lindholmsallen 9, Box 8004, SE-402 77 Göteborg, Schweden
Telefon: +46 31 50 90 00, Fax: +46 31 50 92 22
Die folgende im europäischen Wirtschaftsraum geltende harmonisierte Norm wurde im Design verwendet:
EN 303 446-2 ElectroMagnetic Compatibility (EMC) standard for combined and/or integrated radio and non-radio equipment;
Part 2: Specific conditions for equipment intended to be used in industrial locations.
EN 301 489-1 V2.2.0 Part 1: Common technical requirements
EN 301 489-17 V3.2.0 Part 17: Specific conditions for Broadband Data Transmition Systems
EN 301 489-19 V2.1.0 Part 19: Specific conditions for GPS
EN 301 489-52 V1.1.0 Part 52: Specific conditions for Cellular Communication
Zusatzinformationen:
Restriktive Nutzung, Ausrüstung der Klasse A, für Einsatz außerhalb von Wohnumgebungen vorgesehen
Durch die Unterzeichnung dieses Dokuments erklärte der Unterzeichnende als Hersteller oder dessen im
europäischen Wirtschaftsraum zuständige Vertreter, dass die betreffende Ausrüstung den oben genannten
Sicherheitsanforderungen entspricht.
Datum
Unterschrift
Position
Global Director Equipment
Göteborg
2017-09-27
Stephen Argo
2017
DK
EU-OVERENSSTEMMELSESERKLÆRING
Ifølge
EUROPA-PARLAMENTETS OG RÅDETS DIREKTIV 2014/53/EU af 16. april 2014
RoHS-direktivet 2011/65/EU, der trådte i kraft 2. januar 2013
Type af udstyr
Svejsestrømkilde
Typebetegnelse
Mig 5000i/5000iw WeldCloud, fra serienummer 626-xxx-xxxx (2016 w/26)
Mig U5000i/U5000iw WeldCloud, fra serienummer 626-xxx-xxxx (2016 w/26)
Brandnavn eller varemærke
ESAB
Fabrikanten eller dennes etablerede, bemyndigede repræsentant i EØS
Navn, adresse og telefonnr.:
ESAB AB
Lindholmsallen 9, Box 8004, SE-402 77 Göteborg, Sweden
Tlf.: +46 31 50 90 00, Fax: +46 31 50 92 22
Følgende harmoniserede standarder, der er i kraft inden for EØS, er blevet anvendt i designet:
EN 303 446-2 ElectroMagnetic Compatibility (EMC) standard for combined and/or integrated radio and non-radio equipment;
Part 2: Specific conditions for equipment intended to be used in industrial locations.
EN 301 489-1 V2.2.0 Part 1: Common technical requirements
EN 301 489-17 V3.2.0 Part 17: Specific conditions for Broadband Data Transmition Systems
EN 301 489-19 V2.1.0 Part 19: Specific conditions for GPS
EN 301 489-52 V1.1.0 Part 52: Specific conditions for Cellular Communication
Yderligere oplysninger:
Begrænset anvendelse, klasse A-udstyr, ikke beregnet til brug i boligområder
Ved underskrift af nærværende dokument erklærer undertegnede som fabrikant eller dennes etablerede
repræsentant inden for EØS, at udstyret opfylder de sikkerhedskrav, der er angivet ovenfor.
Dato
Underskrift
Stilling
Global Director Equipment
Göteborg
2017-09-27
Stephen Argo
2017
EE
EL VASTAVUSDEKLARATSIOON
vastavalt
EUROOPA PARLAMENDI JA NÕUKOGU DIREKTIIV 2014/53/EL, 16. aprill 2014,
RoHS-direktiivile 2011/65/EL, mis jõustus 2. jaanuaril 2013;
Seadme tüüp
Keevitusvooluallikas
Tüübitähis
Mig 5000i/5000iw WeldCloud, alates seerianumbrist 626-xxx-xxxx (2016 w/26)
Mig U5000i/U5000iw WeldCloud, alates seerianumbrist 626-xxx-xxxx (2016 w/26)
Tootenimi või kaubamärk
ESAB
Tootja või tema EMÜ-s tegutsev volitatud esindaja
Nimi, aadress ja telefoninumber:
ESAB AB
Lindholmsallen 9, Box 8004, SE-402 77 Göteborg, Sweden
Telefon: +46 31 50 90 00, Faks: +46 31 50 92 22
Toote väljatöötamisel on järgitud järgmisi EMÜ-s kehtivaid ühtlustatud standardeid:
EN 303 446-2 ElectroMagnetic Compatibility (EMC) standard for combined and/or integrated radio and non-radio equipment;
Part 2: Specific conditions for equipment intended to be used in industrial locations.
EN 301 489-1 V2.2.0 Part 1: Common technical requirements
EN 301 489-17 V3.2.0 Part 17: Specific conditions for Broadband Data Transmition Systems
EN 301 489-19 V2.1.0 Part 19: Specific conditions for GPS
EN 301 489-52 V1.1.0 Part 52: Specific conditions for Cellular Communication
Lisateave:
Piiratud kasutamine, A-klassi seade, ette nähtud kasutamiseks mujal kui eluhoonetes
Käesoleva dokumendi allkirjastamisega kinnitab allakirjutanu tootjana või tootja EMÜ-s tegutsev volitatud esindaja,
et kõnealused seadmed vastavad eespool esitatud ohutusnõuetele.
Kuupäev
Allkiri
Ametikoht
Global Director Equipment
Göteborg
2017-09-27
Stephen Argo
2017
ES
DECLARACIÓN DE CONFORMIDAD UE
Conforme a
DIRECTIVA 2014/53/UE DEL PARLAMENTO EUROPEO Y DEL CONSEJO de 16 de abril de 2014
La Directiva sobre restricciones a la utilización de determinadas sustancias peligrosas en aparatos eléctricos y electrónicos
(RoHS) 2011/65/UE, con entrada en vigor el 2 de enero de 2013
Tipo de equipo
Fuente de corriente para soldadura
Tipo de designación
Mig 5000i/5000iw WeldCloud, desde el número de serie 626-xxx-xxxx (2016 w/26)
Mig U5000i/U5000iw WeldCloud, desde el número de serie 626-xxx-xxxx (2016 w/26)
Nombre de marca o marca comercial
ESAB
Fabricante o su representante autorizado establecido en la EEA
Nombre, dirección y n.º de teléfono:
ESAB AB
Lindholmsallen 9, Box 8004, SE-402 77 Gotemburgo, Suecia
Teléfono: +46 31 50 90 00, Fax: +46 31 50 92 22
Las siguientes normas armonizadas en vigor en la EEA se han aplicado en el diseño:
EN 303 446-2 ElectroMagnetic Compatibility (EMC) standard for combined and/or integrated radio and non-radio equipment;
Part 2: Specific conditions for equipment intended to be used in industrial locations.
EN 301 489-1 V2.2.0 Part 1: Common technical requirements
EN 301 489-17 V3.2.0 Part 17: Specific conditions for Broadband Data Transmition Systems
EN 301 489-19 V2.1.0 Part 19: Specific conditions for GPS
EN 301 489-52 V1.1.0 Part 52: Specific conditions for Cellular Communication
Información adicional:
Uso restrictivo, equipo Clase A, destinado a uso en ubicaciones no residenciales
Mediante la firma de este documento, el abajo firmante declara como fabricante, o representante autorizado del
fabricante establecido en la EEA, que el equipo en cuestión cumple con las normas de seguridad arriba
mencionadas.
Fecha
Firma
Director mundial de equipos
Gotemburgo
2017-09-27
Stephen Argo
2017
Cargo
FI
EU-VAATIMUSTENMUKAISUUSVAKUUTUS
Seuraavien direktiivien mukaisesti
EUROOPAN PARLAMENTIN JA NEUVOSTON DIREKTIIVI 2014/53/EU, annettu 16 päivänä huhtikuuta 2014
RoHS-direktiivi 2011/65/EU, joka tulee voimaan 2.1.2013
Laitteistotyyppi
Hitsausvirtalähde
Tyyppimerkintä
Mig 5000i/5000iw WeldCloud, sarjanumerosta 626-xxx-xxxx (2016 w/26)
Mig U5000i/U5000iw WeldCloud, sarjanumerosta 626-xxx-xxxx (2016 w/26)
Tuotenimi tai tavaramerkki
ESAB
Valmistaja tai hänen valtuutettu edustajansa Euroopan talousalueella
Nimi, osoite ja puhelinnumero
ESAB AB
Lindholmsallen 9, Box 8004, SE-402 77 Göteborg, Sweden
Puhelinnumero: +46 31 50 90 00, Faksinumero: +46 31 50 92 22
Seuraavaa Euroopan talousalueella voimassa olevaa harmonisoitua standardia on noudatettu laitteen
suunnittelussa:
EN 303 446-2 ElectroMagnetic Compatibility (EMC) standard for combined and/or integrated radio and non-radio equipment;
Part 2: Specific conditions for equipment intended to be used in industrial locations.
EN 301 489-1 V2.2.0 Part 1: Common technical requirements
EN 301 489-17 V3.2.0 Part 17: Specific conditions for Broadband Data Transmition Systems
EN 301 489-19 V2.1.0 Part 19: Specific conditions for GPS
EN 301 489-52 V1.1.0 Part 52: Specific conditions for Cellular Communication
Lisätietoja:
Luokan A laitteistoa koskee rajoitettu käyttö. Laitteistoa ei ole tarkoitettu käytettäväksi kotitaloustiloissa.
Allekirjoittamalla tämän asiakirjan Euroopan talousalueella toimiva valmistaja tai valmistajan valtuuttama edustaja
vakuuttaa, että kyseessä oleva laitteisto noudattaa edellä mainittuja turvallisuusvaatimuksia.
Päivämäärä
Allekirjoitus
Asema
Global Director Equipment
Göteborg
2017-09-27
Stephen Argo
2017
FR
DÉCLARATION DE CONFORMITÉ EUROPÉENNE
Conformément à
DIRECTIVE 2014/53/UE DU PARLEMENT EUROPÉEN ET DU CONSEIL du 16 avril 2014
La directive RoHS 2011/65/EU, qui est entrée en vigueur le 2 janvier 2013
Type d'appareil
Générateur de soudage
Dénomination générique
Mig 5000i/5000iw WeldCloud, à partir du numéro de série 626-xxx-xxxx (2016 w/26)
Mig U5000i/U5000iw WeldCloud, à partir du numéro de série 626-xxx-xxxx (2016 w/26)
Nom commercial ou marque
ESAB
Le fabricant ou son mandataire établi au sein de l'EEA
Nom, adresse et n° de téléphone :
ESAB AB
Lindholmsallen 9, Box 8004, SE-402 77 Goteborg, Sweden
Tél.: +46 31 50 90 00, Fax: +46 31 50 92 22
La norme harmonisée suivante, en vigueur au sein de l'EEA, a été utilisée lors de la conception :
EN 303 446-2 ElectroMagnetic Compatibility (EMC) standard for combined and/or integrated radio and non-radio equipment;
Part 2: Specific conditions for equipment intended to be used in industrial locations.
EN 301 489-1 V2.2.0 Part 1: Common technical requirements
EN 301 489-17 V3.2.0 Part 17: Specific conditions for Broadband Data Transmition Systems
EN 301 489-19 V2.1.0 Part 19: Specific conditions for GPS
EN 301 489-52 V1.1.0 Part 52: Specific conditions for Cellular Communication
Informations supplémentaires :
Utilisation restrictive, équipement de classe A, prévu pour un usage autre que résidentiel
En signant ce document, le signataire déclare qu'en tant que fabricant, ou représentant autorisé par le fabricant
établi au sein de l'EEA, l'équipement en question est conforme aux exigences de sécurité mentionnées ci-dessus.
Date
Signature
Poste
Global Director Equipment
Göteborg
2017-09-27
Stephen Argo
2017
GR
ΔΗΛΩΣΗ ΣΥΜΜΟΡΦΩΣΗΣ ΕΕ
Σύμφωνα με
ΟΔΗΓΊΑ 2014/53/ΕΕ ΤΟΥ ΕΥΡΩΠΑΪΚΟΫ ΚΟΙΝΟΒΟΥΛΊΟΥ ΚΑΙ ΤΟΥ ΣΥΜΒΟΥΛΊΟΥ της 16ης Απριλίου 2014
Την οδηγία για τον περιορισμό στη χρήση ορισμένων επικίνδυνων ουσιών στα είδη ηλεκτρικού και ηλεκτρονικού εξοπλισμού
(RoHS) 2011/65/ΕΕ, που τέθηκε σε ισχύ στις 2 Ιανουαρίου 2013
Τύπος εξοπλισμού
Πηγή ρεύματος συγκόλλησης
Χαρακτηρισμός τύπου
Mig 5000i/5000iw WeldCloud, από τον αριθμό σειράς 626-xxx-xxxx (2016 w/26)
Mig U5000i/U5000iw WeldCloud, από τον αριθμό σειράς 626-xxx-xxxx (2016 w/26)
Εμπορική ονομασία ή εμπορικό σήμα
ESAB
Κατασκευαστής ή εξουσιοδοτημένος αντιπρόσωπος εγκατεστημένος εντός του ΕΟΧ
Όνομα, διεύθυνση και αρ. τηλεφώνου:
ESAB AB
Lindholmsallen 9, Box 8004, SE-402 77 Goteborg, Sweden
Τηλέφωνο: +46 31 50 90 00, Φαξ: +46 31 50 92 22
Το ακόλουθο εναρμονισμένο πρότυπο που ισχύει εντός του ΕΟΧ έχει χρησιμοποιηθεί στο σχεδιασμό των
παρακάτω:
EN 303 446-2 ElectroMagnetic Compatibility (EMC) standard for combined and/or integrated radio and non-radio equipment;
Part 2: Specific conditions for equipment intended to be used in industrial locations.
EN 301 489-1 V2.2.0 Part 1: Common technical requirements
EN 301 489-17 V3.2.0 Part 17: Specific conditions for Broadband Data Transmition Systems
EN 301 489-19 V2.1.0 Part 19: Specific conditions for GPS
EN 301 489-52 V1.1.0 Part 52: Specific conditions for Cellular Communication
Πρόσθετες πληροφορίες:
Περιορισμένη χρήση, εξοπλισμός κλάσης Α, προορίζεται για χρήση σε περιοχές εκτός των οικιστικών
Με την υπογραφή του παρόντος εγγράφου, ο υπογεγραμμένος δηλώνει ως κατασκευαστής ή ως ο
εξουσιοδοτημένος αντιπρόσωπος του κατασκευαστή, που είναι εγκατεστημένος εντός του ΕΟΧ, ότι ο εν λόγω
εξοπλισμός συμμορφώνεται με τις απαιτήσεις ασφαλείας που αναφέρονται ανωτέρω.
Ημερομηνία
Υπογραφή
Γενικός Διευθυντής Εξοπλισμού
Gothenburg
2017-09-27
Stephen Argo
2017
Θέση
HR
EU izjava o sukladnosti
U skladu s
DIREKTIVA 2014/53/EU EUROPSKOG PARLAMENTA I VIJEĆA od 16. travnja 2014.
RoHS direktivom 2011/65/EU, koja je stupila na snagu 2. siječnja 2013.
Vrsta opreme
Izvor napajanja za zavarivanje
Oznaka tipa
Mig 5000i/5000iw WeldCloud, od serijskog broja 626-xxx-xxxx (2016 w/26)
Mig U5000i/U5000iw WeldCloud, od serijskog broja 626-xxx-xxxx (2016 w/26)
Naziv marke ili zaštitni znak
ESAB
Proizvođač ili njegov ovlašteni predstavnik koji posluje u Europskom gospodarskom prostoru (EEA)
Naziv, adresa i telefonski broj:
ESAB AB
Lindholmsallen 9, Box 8004, SE-402 77 Goteborg, Sweden
Telefon: +46 31 50 90 00, Fax: +46, 584, 411, 924
U dizajnu je korišten sljedeći harmonizirani standard koji je na snazi u Europskom gospodarskom prostoru (EEA):
EN 303 446-2 ElectroMagnetic Compatibility (EMC) standard for combined and/or integrated radio and non-radio equipment;
Part 2: Specific conditions for equipment intended to be used in industrial locations.
EN 301 489-1 V2.2.0 Part 1: Common technical requirements
EN 301 489-17 V3.2.0 Part 17: Specific conditions for Broadband Data Transmition Systems
EN 301 489-19 V2.1.0 Part 19: Specific conditions for GPS
EN 301 489-52 V1.1.0 Part 52: Specific conditions for Cellular Communication
Dodatne informacije:
Ograničena upotreba, oprema klase A, namijenjena za upotrebu van prostora stanovanja
Potpisivanjem ovog dokumenta niže potpisani izjavljuje da kao proizvođač ili ovlašteni predstavnik proizvođača, koji
posluje u Europskom gospodarskom prostoru (EEA) da je navedena oprema u skladu s gore navedenim
sigurnosnim odredbama.
Datum
Potpis
Globalni direktor opreme
Gothenburg
2017-09-27
Stephen Argo
2017
Položaj
HU
EURÓPAI UNIÓS MEGFELELŐSÉGI NYILATKOZAT
Az alábbiak szerint:
AZ EURÓPAI PARLAMENT ÉS A TANÁCS 2014/53/EU IRÁNYELVE (2014. április 16.)
A veszélyes anyagokra vonatkozó 2011/65/EU irányelv; hatályba lépés: 2013. január 2.
A készülék típusa
Hegesztő áramforrás
Típusmegjelölés
Mig 5000i/5000iw WeldCloud, a következő sorozatszámtól: 626-xxx-xxxx (2016 w/26)
Mig U5000i/U5000iw WeldCloud, a következő sorozatszámtól: 626-xxx-xxxx (2016 w/26)
Márkanév vagy védjegy
ESAB
Gyártó, vagy a gyártó az EGT-ben meghatalmazott képviselője
Név, cím és telefonszám:
ESAB AB
Lindholmsallén 9, Box 8004, SE-402 77 Göteborg, Sweden
Telefon: +46 31 50 90 00, Fax: +46 31 50 92 22
A tervezés során a következő EGT-ben hatályos harmonizált szabványt használták:
EN 303 446-2 ElectroMagnetic Compatibility (EMC) standard for combined and/or integrated radio and non-radio equipment;
Part 2: Specific conditions for equipment intended to be used in industrial locations.
EN 301 489-1 V2.2.0 Part 1: Common technical requirements
EN 301 489-17 V3.2.0 Part 17: Specific conditions for Broadband Data Transmition Systems
EN 301 489-19 V2.1.0 Part 19: Specific conditions for GPS
EN 301 489-52 V1.1.0 Part 52: Specific conditions for Cellular Communication
További információk:
Korlátozott használat, A. osztályú készülék, lakókörnyezetben nem használható
A dokumentum aláírásával az alulíró mint gyártó vagy mint a gyártó EGT-ben meghatalmazott képviselője kijelenti,
hogy a vonatkozó készülék megfelel a fent meghatározott biztonsági követelményeknek.
Kelt
Aláírás
Beosztás
Globális igazgató, készülékek
Göteborg
2017-09-27
Stephen Argo
2017
IT
DICHIARAZIONE DI CONFORMITÀ UE
Conformità a
DIRETTIVA 2014/53/UE DEL PARLAMENTO EUROPEO E DEL CONSIGLIO del 16 aprile 2014
Direttiva RoHS 2011/65/UE, in vigore dal 2 gennaio 2013
Tipo di attrezzatura
Generatore di saldatura
Denominazione tipo
Mig 5000i/5000iw WeldCloud, dal numero di serie 626-xxx-xxxx (2016 w/26)
Mig U5000i/U5000iw WeldCloud, dal numero di serie 626-xxx-xxxx (2016 w/26)
Nome del marchio o marchio commerciale
ESAB
Il produttore o il suo rappresentante autorizzato con sede nello Spazio economico europeo (EEA, European
Economic Area)
Nome, indirizzo e n. di telefono:
ESAB AB
Lindholmsallen 9, Box 8004, SE-402 77 Goteborg, Sweden
Telefono: +46 31 50 90 00, Fax: +46 31 50 92 22
Per il design è stato utilizzato il seguente standard armonizzato in vigore nell'EEA:
EN 303 446-2 ElectroMagnetic Compatibility (EMC) standard for combined and/or integrated radio and non-radio equipment;
Part 2: Specific conditions for equipment intended to be used in industrial locations.
EN 301 489-1 V2.2.0 Part 1: Common technical requirements
EN 301 489-17 V3.2.0 Part 17: Specific conditions for Broadband Data Transmition Systems
EN 301 489-19 V2.1.0 Part 19: Specific conditions for GPS
EN 301 489-52 V1.1.0 Part 52: Specific conditions for Cellular Communication
Informazioni aggiuntive:
Restrizioni d'uso, apparecchio di Classe A, destinato per l'uso in luoghi diversi da quelli residenziali
Firmando il presente documento, il sottoscritto dichiara, in qualità di produttore o di rappresentante autorizzato del
produttore con sede nell'EEA, che l'apparecchio in questione è conforme ai requisiti di sicurezza sopra indicati.
Data
Firma
Global Director Equipment
Gothenburg
2017-09-27
Stephen Argo
2017
Qualifica
LT
ES ATITIKTIES DEKLARACIJA
Remiantis
EUROPOS PARLAMENTO IR TARYBOS DIREKTYVA 2014/53/ES 2014 m. balandžio 16 d.
Direktyva dėl tam tikrų pavojingų medžiagų naudojimo elektros ir elektroninėje įrangoje apribojimo 2011/65/ES, galiojančia
nuo 2013 m. sausio 2 d.
Įrenginio tipas
Suvirinimo maitinimo šaltinis
Tipo pavadinimas
Mig 5000i/5000iw WeldCloud, nuo serijos Nr. 626-xxx-xxxx (2016 w/26)
Mig U5000i/U5000iw WeldCloud, nuo serijos Nr. 626-xxx-xxxx (2016 w/26)
Prekės ženklas
ESAB
Gamintojas arba jo įgaliotasis atstovas EEE
Pavadinimas, adresas ir telefonas:
ESAB AB
Lindholmsallen 9, Box 8004, SE-402 77 Goteborg, Sweden
Tel. +46 31 50 90 00, faks. +46 31 50 92 22
Kuriant įrangą vadovautasi šiuo EEE galiojančiu darniuoju standartu:
EN 303 446-2 ElectroMagnetic Compatibility (EMC) standard for combined and/or integrated radio and non-radio equipment;
Part 2: Specific conditions for equipment intended to be used in industrial locations.
EN 301 489-1 V2.2.0 Part 1: Common technical requirements
EN 301 489-17 V3.2.0 Part 17: Specific conditions for Broadband Data Transmition Systems
EN 301 489-19 V2.1.0 Part 19: Specific conditions for GPS
EN 301 489-52 V1.1.0 Part 52: Specific conditions for Cellular Communication
Papildoma informacija:
Apriboto naudojimo A klasės įranga, skirta naudoti ne gyvenamuosiuose rajonuose
Pasirašydamas šį dokumentą, pasirašantysis, kaip gamintojas arba gamintojo įgaliotasis atstovas EEE, patvirtina,
kad minima įranga atitinka aukščiau nurodytus saugos reikalavimus.
Data
Parašas
Įrangos padalinio direktorius
Gothenburg
2017-09-27
Stephen Argo
2017
Pareigos
LV
ES ATBILSTĪBAS DEKLARĀCIJA
Saskaņā ar tālāk minētajām direktīvām.
EIROPAS PARLAMENTA UN PADOMES DIREKTĪVA 2014/53/ES (2014. gada 16. aprīlis)
RoHS direktīva 2011/65/ES, kas stājas spēkā 2013. gada 2. janvārī.
Aprīkojuma veids
Metināšanas barošanas avots
Veida marķējums
Mig 5000i/5000iw WeldCloud, sākot ar sērijas numuru 626-xxx-xxxx (2016 w/26)
Mig U5000i/U5000iw WeldCloud, sākot ar sērijas numuru 626-xxx-xxxx (2016 w/26)
Zīmola nosaukums vai preču zīme
ESAB
Ražotājs vai ražotāja pilnvarotais pārstāvis Eiropas Ekonomikas zonā
Nosaukums, adrese un tālruņa numurs:
ESAB AB
Lindholmsallen 9, Box 8004, SE-402 77 Goteborg, Sweden
Tālruņa nr.: +46 31 50 90 00, faksa numurs: +46 31 50 92 22
Aprīkojuma izstrādē ir izmantots tālāk minētais saskaņotais standarts, kas ir spēkā EEZ robežās.
EN 303 446-2 ElectroMagnetic Compatibility (EMC) standard for combined and/or integrated radio and non-radio equipment;
Part 2: Specific conditions for equipment intended to be used in industrial locations.
EN 301 489-1 V2.2.0 Part 1: Common technical requirements
EN 301 489-17 V3.2.0 Part 17: Specific conditions for Broadband Data Transmition Systems
EN 301 489-19 V2.1.0 Part 19: Specific conditions for GPS
EN 301 489-52 V1.1.0 Part 52: Specific conditions for Cellular Communication
Papildinformācija
Ierobežota lietojuma A klases iekārta, paredzēta izmantošanai vietās, kas nav dzīvojamās mājas.
Parakstot šo dokumentu, apakšā parakstījusies persona kā ražotājs vai ražotāja pilnvarotais pārstāvis Eiropas
Ekonomikas zonā (EEZ) apliecina, ka attiecīgā iekārta atbilst iepriekš minētajām drošības prasībām.
Datums
Paraksts
Globālais direktors aprīkojuma
jautājumos
Gotenbērga
2017-09-27
Stephen Argo
2017
Amats
NL
EU-CONFORMITEITSVERKLARING
Conform
RICHTLIJN 2014/53/EU VAN HET EUROPEES PARLEMENT EN DE RAAD van 16 april 2014
De RoHS-richtlijn 2011/65/EU die op 2 januari 2013 van kracht is geworden
Type apparatuur
Lasstroombron
Typeaanduiding
Mig 5000i/5000iw WeldCloud, vanaf serienummer 626-xxx-xxxx (2016 w/26)
Mig U5000i/U5000iw WeldCloud, vanaf serienummer 626-xxx-xxxx (2016 w/26)
Merknaam of handelsmerk
ESAB
Fabrikant of zijn gemachtigde vertegenwoordiger, gevestigd binnen de EER
Naam, adres en telefoonnummer:
ESAB AB
Lindholmsallen 9, Box 8004, SE-402 77 Goteborg, Sweden
Telefoonnummer: +46 31 50 90 00, Fax: +46 31 50 92 22
De onderstaande in de EER van kracht zijnde geharmoniseerde norm is toegepast bij het ontwerp:
EN 303 446-2 ElectroMagnetic Compatibility (EMC) standard for combined and/or integrated radio and non-radio equipment;
Part 2: Specific conditions for equipment intended to be used in industrial locations.
EN 301 489-1 V2.2.0 Part 1: Common technical requirements
EN 301 489-17 V3.2.0 Part 17: Specific conditions for Broadband Data Transmition Systems
EN 301 489-19 V2.1.0 Part 19: Specific conditions for GPS
EN 301 489-52 V1.1.0 Part 52: Specific conditions for Cellular Communication
Aanvullende informatie:
Beperkt gebruik, apparatuur van klasse A voor gebruik in andere locaties dan woonomgevingen
Door ondertekening van dit document verklaart ondergetekende als fabrikant of door de fabrikant gemachtigde en in
de EER gevestigde vertegenwoordiger dat de desbetreffende apparatuur voldoet aan de hierboven genoemde
veiligheidseisen.
Datum
Handtekening
Global Director Equipment
Gothenburg
2017-09-27
Stephen Argo
2017
Functie
NO
EU-SAMSVARSERKLÆRING
I henhold til
Radioutstyrsdirektivet 2014/53/EU, som trer i kraft 13. juni 2016
RoHS-direktivet 2011/65/EU, som trer i kraft 2. januar 2013
Utstyrstype
Strømkilde til sveising
Typebetegnelse
Mig 5000i/5000iw WeldCloud, fra serienummer 626-xxx-xxxx (2016 w/26)
Mig U5000i/U5000iw WeldCloud, fra serienummer 626-xxx-xxxx (2016 w/26)
Merkenavn eller varemerke
ESAB
Produsent eller dennes autoriserte representant etablert innen EØS
Navn, adresse og telefonnr.:
ESAB AB
Lindholmsallen 9, Box 8004, SE-402 77 Göteborg, Sweden
Telefon: +46 31 50 90 00, Faks: +46 31 50 92 22
Den følgende harmoniserte standarden i kraft innen EØS er brukt i designen:
EN 303 446-2 ElectroMagnetic Compatibility (EMC) standard for combined and/or integrated radio and non-radio equipment;
Part 2: Specific conditions for equipment intended to be used in industrial locations.
EN 301 489-1 V2.2.0 Part 1: Common technical requirements
EN 301 489-17 V3.2.0 Part 17: Specific conditions for Broadband Data Transmition Systems
EN 301 489-19 V2.1.0 Part 19: Specific conditions for GPS
EN 301 489-52 V1.1.0 Part 52: Specific conditions for Cellular Communication
Ytterligere informasjon:
Restriktiv bruk, klasse A-utstyr, beregnet for bruk på steder som ikke er boliger
Ved å signere dette dokumentet erklærer undertegnede som produsent, eller produsentens autoriserte representant
etablert innen EØS, at det aktuelle utstyret overholder sikkerhetskravene oppgitt ovenfor.
Dato
Signatur
Stilling
Global Director Equipment
Göteborg
2017-09-27
Stephen Argo
2017
PL
DEKLARACJA ZGODNOŚCI UE
zgodna z
DYREKTYWA PARLAMENTU EUROPEJSKIEGO I RADY 2014/53/UE z dnia 16 kwietnia 2014 r.
Dyrektywa RoHS 2011/65/WE, wchodząca w życie 2 stycznia 2013 roku
Typ sprzętu
Źródło prądu spawania
Oznaczenie typu
Mig 5000i/5000iw WeldCloud, od numeru seryjnego 626-xxx-xxxx (2016 w/26)
Mig U5000i/U5000iw WeldCloud, od numeru seryjnego 626-xxx-xxxx (2016 w/26)
Nazwa marki lub znak towarowy
ESAB
Producent lub jego upoważniony przedstawiciel z siedzibą w EOG
Nazwa, adres i numer telefonu:
ESAB AB
Lindholmsallen 9, Box 8004, SE-402 77 Goteborg, Sweden
Telefon: +46 31 50 90 00, faks: +46 31 50 92 22
Następująca norma zharmonizowana obowiązująca w EOG obowiązuje w wersji:
EN 303 446-2 ElectroMagnetic Compatibility (EMC) standard for combined and/or integrated radio and non-radio equipment;
Part 2: Specific conditions for equipment intended to be used in industrial locations.
EN 301 489-1 V2.2.0 Part 1: Common technical requirements
EN 301 489-17 V3.2.0 Part 17: Specific conditions for Broadband Data Transmition Systems
EN 301 489-19 V2.1.0 Part 19: Specific conditions for GPS
EN 301 489-52 V1.1.0 Part 52: Specific conditions for Cellular Communication
Informacje dodatkowe:
Ograniczone zastosowanie, urządzenia klasy A, przeznaczone do użytku w obiektach innych niż mieszkalne
Podpisując ten dokument, niżej podpisany jako producent lub jego upoważniony przedstawiciel z siedzibą w EOG
oświadcza, że powyższe urządzenia spełniają określone wyżej wymogi bezpieczeństwa.
Data
Podpis
Dyrektor Globalny ds. Sprzętu
Gothenburg
2017-09-27
Stephen Argo
2017
Stanowisko
PT
DECLARAÇÃO DE CONFORMIDADE UE
De acordo com
DIRETIVA 2014/53/UE DO PARLAMENTO EUROPEU E DO CONSELHO de 16 de abril de 2014
a diretiva RoHS 2011/65/UE, com entrada em vigor a 2 de janeiro de 2013
Tipo de equipamento
Fonte de alimentação de soldadura
Designação do tipo
Mig 5000i/5000iw WeldCloud, do número de série 626-xxx-xxxx (2016 w/26)
Mig U5000i/U5000iw WeldCloud, do número de série 626-xxx-xxxx (2016 w/26)
Marca ou marca comercial
ESAB
Fabricante ou respetivo representante autorizado estabelecido no EEE
Nome, endereço e n.º de telefone:
ESAB AB
Lindholmsallen 9, Box 8004, SE-402 77 Goteborg, Sweden
Telefone: +46 31 50 90 00, Fax: +46 31 50 92 22
A seguinte norma harmonizada, em vigor no EEE, foi utilizada no design:
EN 303 446-2 ElectroMagnetic Compatibility (EMC) standard for combined and/or integrated radio and non-radio equipment;
Part 2: Specific conditions for equipment intended to be used in industrial locations.
EN 301 489-1 V2.2.0 Part 1: Common technical requirements
EN 301 489-17 V3.2.0 Part 17: Specific conditions for Broadband Data Transmition Systems
EN 301 489-19 V2.1.0 Part 19: Specific conditions for GPS
EN 301 489-52 V1.1.0 Part 52: Specific conditions for Cellular Communication
Informação adicional:
Utilização limitada, equipamento de classe A, destinado a utilização em locais não residenciais
Ao assinar o presente documento, o assinante declara, enquanto fabricante ou representante autorizado
estabelecido no EEE, que o equipamento em questão se encontra em conformidade com os requisitos de segurança
supramencionados.
Data
Assinatura
Diretor global de equipamento
Gothenburg
2017-09-27
Stephen Argo
2017
Função
RO
DECLARAŢIE DE CONFORMITATE UE
În conformitate cu
DIRECTIVA 2014/53/UE A PARLAMENTULUI EUROPEAN ȘI A CONSILIULUI din 16 aprilie 2014
Directiva 2011/65/UE privind restricţiile de utilizare a anumitor substanţe periculoase în echipamentele electrice şi electronice,
în vigoare de la 2 ianuarie 2013
Tipul echipamentului
Sursă de alimentare pentru sudură
Denumirea echipamentului
Mig 5000i/5000iw WeldCloud, de la numărul de serie 626-xxx-xxxx (2016 w/26)
Mig U5000i/U5000iw WeldCloud, de la numărul de serie 626-xxx-xxxx (2016 w/26)
Numele mărcii sau denumirea comercială
ESAB
Producătorul sau reprezentantul autorizat al acestuia cu sediu în ZEE
Numele, adresa şi nr. de telefon:
ESAB AB
Lindholmsallen 9, Box 8004, SE-402 77 Goteborg, Sweden
Telefon: +46 31 50 90 00, Fax: +46 31 50 92 22
Următorul standard armonizat, în vigoare în cadrul ZEE, a fost utilizat pentru proiectare:
EN 303 446-2 ElectroMagnetic Compatibility (EMC) standard for combined and/or integrated radio and non-radio equipment;
Part 2: Specific conditions for equipment intended to be used in industrial locations.
EN 301 489-1 V2.2.0 Part 1: Common technical requirements
EN 301 489-17 V3.2.0 Part 17: Specific conditions for Broadband Data Transmition Systems
EN 301 489-19 V2.1.0 Part 19: Specific conditions for GPS
EN 301 489-52 V1.1.0 Part 52: Specific conditions for Cellular Communication
Informaţii suplimentare:
Echipament din clasa A, cu utilizare limitată, destinat utilizării în alte locaţii decât cele rezidenţiale
Prin semnarea acestui document, subsemnatul, în calitate de producător sau de reprezentant autorizat al
producătorului cu sediu în ZEE, declară că echipamentul în cauză respectă cerinţele de siguranţă menţionate mai
sus.
Semnătura
Data
Funcţia
Director echipamente globale
Göteborg
2017-09-27
Stephen Argo
2017
SE
EU-FÖRSÄKRAN OM ÖVERENSSTÄMMELSE
Enligt
EUROPAPARLAMENTETS OCH RÅDETS DIREKTIV 2014/53/EU av den 16 april 2014
Direktivet om RoHS (hälso- och miljöfarliga ämnen) 2011/65/EU, som trädde i kraft den 2 januari 2013
Typ av utrustning
Svetsströmkälla
Typbeteckning
Mig 5000i/5000iw WeldCloud, från serienummer 626-xxx-xxxx (2016 w/26)
Mig U5000i/U5000iw WeldCloud, från serienummer 626-xxx-xxxx (2016 w/26)
Varunamn eller varumärke
ESAB
Tillverkaren eller dennes representant inom EES (Europeiska ekonomiska samarbetsområdet)
Namn, adress och telefonnummer:
ESAB AB
Lindholmsallén 9, Box 8004, SE-402 77 Göteborg, Sverige
Telefon: +46 31 50 90 00, Fax: +46 31 50 92 22
Följande harmoniserade standard som gäller inom EES har använts i designen:
EN 303 446-2 ElectroMagnetic Compatibility (EMC) standard for combined and/or integrated radio and non-radio equipment;
Part 2: Specific conditions for equipment intended to be used in industrial locations.
EN 301 489-1 V2.2.0 Part 1: Common technical requirements
EN 301 489-17 V3.2.0 Part 17: Specific conditions for Broadband Data Transmition Systems
EN 301 489-19 V2.1.0 Part 19: Specific conditions for GPS
EN 301 489-52 V1.1.0 Part 52: Specific conditions for Cellular Communication
Ytterligare information:
Begränsad användning, klass A-utrustning, avsedd för användning i annan plats än bostäder
Genom att underteckna detta dokument intygar den om skriver under i egenskap av tillverkaren eller tillverkarens
representant inom EES, att utrustningen uppfyller de säkerhetskrav som anges ovan.
Datum
Namnteckning
Befattning
Global Director Equipment
Göteborg
2017-09-27
Stephen Argo
2017
SI
IZJAVA EU O SKLADNOSTI
V skladu z
DIREKTIVA 2014/53/EU EVROPSKEGA PARLAMENTA IN SVETA z dne 16. aprila 2014
Direktiva 2011/65/EU RoHS, ki je vstopila v veljavo 2. januarja 2013
Vrsta opreme
Varilni transformator
Tipska oznaka
Mig 5000i/5000iw WeldCloud, od serijske številke 626-xxx-xxxx (2016 w/26)
Mig U5000i/U5000iw WeldCloud, od serijske številke 626-xxx-xxxx (2016 w/26)
Ime znamke ali blagovna znamka
ESAB
Proizvajalec ali pooblaščeni zastopnik znotraj EGP
Ime, naslov in tel. št.:
ESAB AB
Lindholmsallen 9, Box 8004, SE-402 77 Goteborg, Sweden
Telefon: +46 31 50 90 00, Faks: +46 31 50 92 22
Pri zasnovi izdelka je bil upoštevan naslednji veljaven usklajeni standard, ki veljajo v območju EGP:
EN 303 446-2 ElectroMagnetic Compatibility (EMC) standard for combined and/or integrated radio and non-radio equipment;
Part 2: Specific conditions for equipment intended to be used in industrial locations.
EN 301 489-1 V2.2.0 Part 1: Common technical requirements
EN 301 489-17 V3.2.0 Part 17: Specific conditions for Broadband Data Transmition Systems
EN 301 489-19 V2.1.0 Part 19: Specific conditions for GPS
EN 301 489-52 V1.1.0 Part 52: Specific conditions for Cellular Communication
Dodatne informacije:
Omejitev uporabe, oprema razreda A ni namenjena za uporabo v stanovanjskih prostorih
Podpisani proizvajalec ali pooblaščeni proizvajalčev zastopnik znotraj območja EGP s podpisom tega dokumenta
izjavlja, da je obravnavana oprema skladna s predhodno navedenimi varnostnimi zahtevami.
Datum
Podpis
Global Director Equipment
Gothenburg
2017-09-27
Stephen Argo
2017
Položaj
SK
VYHLÁSENIE O ZHODE EÚ
podľa
SMERNICA EURÓPSKEHO PARLAMENTU A RADY 2014/53/EÚ zo 16. apríla 2014
smernice Európskeho parlamentu a Rady 2011/65/EÚ o obmedzení používania určitých nebezpečných látok v elektrických
a elektronických zariadeniach vstupujúcej do platnosti 2. januára 2013
Typ zariadenia
Zdroj zváracieho prúdu
Typové označenie
Mig 5000i/5000iw WeldCloud, od výrobného čísla 626-xxx-xxxx (2016 w/26)
Mig U5000i/U5000iw WeldCloud, od výrobného čísla 626-xxx-xxxx (2016 w/26)
Názov značky alebo ochrannej známky
ESAB
Výrobca alebo jeho autorizovaný zástupca ustanovený v rámci EHP
Názov, adresa a telefónne číslo:
ESAB AB
Lindholmsallen 9, Box 8004, SE-402 77 Goteborg, Sweden
Telefón: +46 31 50 90 00, Fax: +46 31 50 92 22
Nasledujúce platné harmonizované štandardy v rámci EHP boli použité pri návrhu:
EN 303 446-2 ElectroMagnetic Compatibility (EMC) standard for combined and/or integrated radio and non-radio equipment;
Part 2: Specific conditions for equipment intended to be used in industrial locations.
EN 301 489-1 V2.2.0 Part 1: Common technical requirements
EN 301 489-17 V3.2.0 Part 17: Specific conditions for Broadband Data Transmition Systems
EN 301 489-19 V2.1.0 Part 19: Specific conditions for GPS
EN 301 489-52 V1.1.0 Part 52: Specific conditions for Cellular Communication
Ďalšie informácie:
Obmedzené použitie, zariadenie triedy A nie je určené na používanie v obytných oblastiach
Podpísaním tohto dokumentu nižšie podpísaný výrobca alebo autorizovaný zástupca výrobcu v rámci EHP
vyhlasuje, že príslušné zariadenie spĺňa hore uvedené bezpečnostné požiadavky.
Dátum
Podpis
Globálny riaditeľ pre zariadenia
Gothenburg
2017-09-27
Stephen Argo
2017
Funkcia
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising