SIIG | JU-H30C11-S1 | Guide | SIIG JU-H30C11-S1 USB-C to 4-Port USB 3.0 Hub with PD Charging 3A/1C Guide

SIIG JU-H30C11-S1 USB-C to 4-Port USB 3.0 Hub with PD Charging 3A/1C Guide
USB-C to 4-Port USB 3.0 Hub
with PD Charging - 3A/1C
User Reference Guide
Introduction
The USB-C to 4-Port USB 3.0 Hub with PD Charging
- 3A/1C increases connectivity by adding one
USB-C port (Charging and Sync) and three USB 3.0
ports instantly through a single USB-C connection.
Key Features and Benefits
•
•
•
•
04-1076B
Features charging and sync USB-C port
supports USB Power Delivery (PD) protocol
allows power charging from compatible
power adapter to the laptop unit or fast data
communication with USB 3.0 devices
Allows connecting multiple USB peripherals
simultaneously with data transfer rates up
to 5Gb/s
Aluminum housing with woven braided
cable offers extra durability
Pocket sized design makes it extremely
portable
1
•
Plug-n-Play, no software installation
required
Compatible with Mac or Windows computers
•
Specifications
Number of Connectors
Connectors
2
4
Input: 1x USB-C, Male
Output: 1x USB-C, Charging and Sync, Female
3x 9-pin, USB 3.0 Type-A, Female
Data Transfer Rate
Up to 5Gb/s
Built-in Cable Length
5.91" (15cm)
Power
USB Bus-powered
Color
Silver
Dimensions
3.11" (W) x 0.63" (H) x 1.85" (D)
Weight
0.13 lbs
Operating
Temperature
32 to 122 degrees F
Storage Temperature
14 to 140 degrees F
Humidity
5% to 85% RH (non-condensing)
Package Contents
•
•
USB-C to 4-Port USB 3.0 Hub with PD
Charging - 3A/1C
User Reference Guide
System Requirements
•
•
Computer with USB-C port
USB Power Delivery Specification (USB PD)
over USB-C
Layout
USB Type-A
USB Type-A
USB-C
(Charging and Sync)
USB Type-A
USB-C
Figure 1: USB-C to 4-Port USB 3.0 Hub with PD Charging - 3A/1C
•
USB-C: Connects to USB-C port of the
computer
3
•
•
4
USB Type-A (x3): Connects to USB
peripherals such as mice, flash drives, or
printers
USB-C (Charging and Sync): Connects to a
USB-C power source for power charging your
laptop or connect to USB-C device for data
transfering
Application
USB-C to 4-Port USB 3.0 Hub with PD
Charging - 3A/1C provides USB data and USB PD
charging simultaneously in one ultra-slim unit.
Note: It's not recommended to connect multiple power-hungry
USB devices simultaneously.
Figure 2: Application
5
Blank Page
6
Technical Support and Warranty
QUESTIONS? SIIG’s Online Support has answers! Simply visit our web site at
www.siig.com and click Support. Our online support database is updated daily with new
drivers and solutions. Answers to your questions could be just a few clicks away. You can
also submit questions online and a technical support analyst will promptly respond.
SIIG offers a 2-year manufacturer warranty with this product. This warranty covers the
original purchaser and guarantees the product to be free of any defects in materials or
workmanship for two (2) years from the date of purchase of the product.
SIIG will, at our discretion, repair or replace (with an identical product or product having
similar features and functionality) the product if defective in materials or workmanship.
This warranty gives you specific legal rights, and you may also have other rights which
vary from state to state. Please see our web site for more warranty details.
If you encounter any problems with this product, please follow the procedures below.
A) If it is within the store's return policy period, please return the product to the store where
you purchased from.
B) If your purchase has passed the store's return policy period, please follow the steps below
to have the product repaired or replaced.
Step 1: Submit your RMA request.
Go to www.siig.com, click Support, then REQUEST A PRODUCT REPLACEMENT
to submit a request to SIIG RMA or fax a request to 510-657-5962. Your RMA request
will be processed, if the product is determined to be defective, an RMA number will
be issued.
Step 2: After obtaining an RMA number, ship the product.
•
Properly pack the product for shipping. All accessories that came with the
original package must be included.
•
Clearly write your RMA number on the top of the returned package. SIIG will
refuse to accept any shipping package, and will not be responsible for a product
returned without an RMA number posted on the outside of the shipping carton.
•
You are responsible for the cost of shipping to SIIG. Ship the product to the
following address:
SIIG, Inc.
6078 Stewart Avenue
Fremont, CA 94538-3152, USA
RMA #:
•
SIIG will ship the repaired or replaced product via Ground in the U.S. and
International Economy outside of the U.S. at no cost to the customer.
7
About SIIG, Inc.
Founded in 1985, SIIG, Inc. is a leading manufacturer of IT connectivity
solutions (including Serial ATA and Ultra ATA Controllers, FireWire, USB, and
legacy I/O adapters) that bridge the connection between Desktop/Notebook
systems and external peripherals. SIIG continues to grow by adding A/V and
Digital Signage connectivity solutions to our extensive portfolio.
SIIG products offer comprehensive user manuals, many user-friendly features,
and are backed by an extensive manufacturer warranty. High quality control
standards are evident by the overall ease of installation and compatibility of our
products, as well as one of the lowest defective return rates in the industry. SIIG
products can be found in computer retail stores, mail order catalogs, through
major distributors, system integrators, and VARs in the Americas and the UK,
and through e-commerce sites.
PRODUCT NAME
USB-C to 4-Port USB 3.0 Hub with PD Charging - 3A/1C
FCC RULES: TESTED TO COMPLY WITH FCC PART 15, CLASS B
OPERATING ENVIRONMENT: FOR HOME OR OFFICE USE
FCC COMPLIANCE STATEMENT:
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference,
and (2) this device must accept any interference received, including interference that may cause undesired operation.
THE PARTY RESPONSIBLE FOR PRODUCT COMPLIANCE
SIIG, Inc.
6078 Stewart Avenue
Fremont, CA 94538-3152, USA
Phone: 510-657-8688
USB-C to 4-Port USB 3.0 Hub with PD Charging - 3A/1C is a trademark of SIIG, Inc. SIIG and
the SIIG logo are registered trademarks of SIIG, Inc. All other names used in this publication are
for identification only and may be trademarks of their respective owners.
July, 2017
Copyright © 2017 by SIIG, Inc. All rights reserved.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising