ICP DAS USA | UA-2241M | Quick start manual | ICP DAS USA UA-2241M Quick Start Manual

ICP DAS USA UA-2241M Quick Start Manual
UA-2200 Series Quick Start
English / v1.0 / Apr. 2019
What’s in the box?
The shipping package contains this document and the following
items:
UA-2241M
MicroSD 卡
Pin Terminalx 16
Screw Driver
CA-0910
Cable
[Technical Support]
UA Series User Manual:
http://ftp.icpdas.com/pub/cd/UASeries/user_manual/UA-5231_UA-2241
ICP DAS Website: http://www.icpdas.com
Technical Support E-Mail: service@icpdas.com
UA-5200 Series Quick Start
1
Preparations for Devices
1. Power Supply: +12 ~ +48 VDC (Ex: DP-665)
2. Ethernet Hub or Switch (Ex: NS-205)
3. PC/NB: Can connect to the network and set the network
Hardware Connection
Connect the UA-2200 with the RJ-45 Ethernet port to an
Ethernet hub/switch and PC. You can also link directly the
UA-2200 to PC with an Ethernet cable.
After power is connected, please【wait 1 minute】for UA-2200
start-up procedure. When the "RUN" "PWR" lights start flashing,
it represents the boot is complete.
P.GND
PWR
LAN1
Hub/Switch
Ethernet
Cable
Ethernet
Cable
GND
VS+
Power Supply
(12 ~ 48 VDC)
UA-5200 Series Quick Start
2
Network Connection
Factory Default Settings of UA-2200
Netmask
192.168.255.1
Assign UA-2200
10.0.0.1
a new IP setting
255.255.0.0
according to your
Gateway
192.168.1.1
Username
root
Password
icpdas
IP LAN1
LAN2
Network
OS
Account
Web UI Username
Account Password
case.
After login,
change your
password ASAP.
(Refer User
Manual)
root
root
1. Change the PC’s IP setting as following.
(Write down the PC original network settings before modify.)
IP
192.168.255.10
Subnet mask
255.255.0.0
Gateway address
192.168.1.1
2. Make sure the PC and UA-2200 is connecting through
Ethernet. And then open a PC side browser. (Ex: Chrome,
IE…)
UA-5200 Series Quick Start
3
3. Type
http://192.168.255.1 in the URL address. Use default
Web UI username/password root/root to login the system.
4. Click【System Setting】【Network Setting】【Network
Setting(LAN1)】to change the IP setting by user network.
5. Save the IP setting, restore the PC original IP settings, and
type the new IP in the browser as step-3 to login the Web UI
of UA-2200. And then configure user’s UA project.
UA-5200 Series Quick Start
4
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising