Texas Instruments | BP-DAC11001EVM | User Guides | Texas Instruments BP-DAC11001EVM User guides

Texas Instruments BP-DAC11001EVM User guides
User's Guide
SLAU806 – October 2019
BP-DAC11001EVM
This user’s guide describes the characteristics, operation, and use of the BP-DAC11001 evaluation
module (EVM) BoosterPack™ plug-in module. This EVM is designed to evaluate the performance of the
DAC11001 buffered voltage output DAC in a variety of configurations. Throughout this document, the
terms evaluation board, evaluation module, and EVM are synonymous with the BP-DAC11001EVM. This
document includes a schematic, reference printed-circuit board (PCB) layouts, and a complete bill of
materials.
1
2
3
4
Contents
Overview ..................................................................................................................... 3
1.1
Kit Contents ......................................................................................................... 3
1.2
Related Documentation from Texas Instruments .............................................................. 3
System Setup ................................................................................................................ 4
2.1
Software Setup ..................................................................................................... 4
2.2
Hardware Setup .................................................................................................... 6
Detailed Description ......................................................................................................... 8
3.1
Hardware Description ............................................................................................. 8
3.2
Software Description ............................................................................................. 10
Schematic, PCB Layout, and Bill of Materials .......................................................................... 16
4.1
BP-DAC11001EVM Schematic ................................................................................. 16
4.2
PCB Layout ........................................................................................................ 20
4.3
BP-DAC11001EVM Bill of Materials ............................................................................ 23
List of Figures
......................................................................................
..................................................................................................
Launchpad Setup ............................................................................................................
TI Cloud Agent Installation .................................................................................................
Hardware Setup ..............................................................................................................
1
BP-DAC11001EVM Software Setup
2
Software Installation Path
3
4
5
SLAU806 – October 2019
Submit Documentation Feedback
BP-DAC11001EVM
Copyright © 2019, Texas Instruments Incorporated
4
4
5
5
6
1
www.ti.com
6
BP-DAC11001EVM Hardware Block Diagram ........................................................................... 8
7
Launchpad Interface Pinout ................................................................................................ 9
8
BP-DAC11001EVM GUI Location........................................................................................ 10
9
GUI Connection Detection ................................................................................................ 10
10
Software Home Page ...................................................................................................... 11
11
Setup Page.................................................................................................................. 12
12
DAC Quick-Start Page: Basic DAC Tab
13
13
Register Map Page
14
14
15
16
17
18
19
20
21
22
23
24
25
................................................................................
........................................................................................................
Register Page Options ....................................................................................................
Collateral Page .............................................................................................................
Schematic Page 1 ..........................................................................................................
Schematic Page 2 ..........................................................................................................
Schematic Page 3 ..........................................................................................................
Schematic Page 4 ..........................................................................................................
PCB Components: Top Overlay ..........................................................................................
PCB Components: Bottom Overlay ......................................................................................
PCB Layout: Top Layer ...................................................................................................
PCB Layout: Ground Plane ...............................................................................................
PCB Layout: Power Plane ................................................................................................
PCB Layout: Bottom Layer ................................................................................................
14
15
16
17
18
19
20
20
21
21
22
22
List of Tables
1
2
3
4
5
6
.................................................................................................................. 3
Required Components Not Included With Kit ............................................................................ 3
Related Documentation ..................................................................................................... 3
BP-DAC11001EVM Power Supply Inputs ................................................................................ 7
BP-DAC11001EVM Jumper Settings ..................................................................................... 7
BP-DAC11001EVM Bill of Materials .................................................................................... 23
Kit Contents
Trademarks
BoosterPack is a trademark of Texas Instruments Inc.
Windows is a trademark of Microsoft Corporation.
All other trademarks are the property of their respective owners.
2
BP-DAC11001EVM
SLAU806 – October 2019
Submit Documentation Feedback
Copyright © 2019, Texas Instruments Incorporated
Overview
www.ti.com
1
Overview
The BP-DAC11001EVM is an easy-to-use platform to evaluate the functionality and performance of the
DAC11001 device. The DAC11001 is a highly accurate, low-noise, voltage-output, single-channel, digitalto-analog converter (DAC). The DAC11001 is specified monotonic by design, and offers excellent linearity
of less than 4 LSB (max) across all ranges.
The unbuffered voltage output offers low-noise performance (7 nV/√Hz) in combination with fast settling
time (1 μs), making this device an excellent choice for low-noise, high-speed applications. The DAC11001
integrates an enhanced deglitch circuit with range- and code-independent symmetrical ultra-low glitch (1.5
nV-s) to enable clean waveform ramps with ultra-low harmonic distortion (THD).
The DAC11001 device incorporates a power-on-reset (POR) circuit so that the DAC powers on with
known values in the registers. With external references, DAC output ranges from VREFPF to VREFNF can be
achieved, including asymmetric output ranges.
The DAC11001 uses a versatile 4–wire serial interface that operates at clock rates of up to 50 MHz. The
DAC11001 is specified over the industrial temperature range of –40°C to +125°C.
The EVM provides the GPIO and SPI programming interface using a PC-based graphical user interface
(GUI). This EVM requires the MSP-EXP432E401Y Launchpad for interfacing with the PC-based GUI.
1.1
Kit Contents
Table 1 details the contents of the EVM kit. Contact the TI Product Information Center nearest you if any
component is missing. TI highly recommends that the user verify latest versions of the related software at
the TI website, www.ti.com.
Table 1. Kit Contents
Item
Quantity
BP-DAC11001EVM BoosterPack
1
Table 2. Required Components Not Included With Kit
Item
Quantity
MSP-EXP432E401Y Launchpad
1
The MSP-EXP432E401Y Launchpad can be purchased from the MSP432E401Y tool folder on
www.ti.com.
1.2
Related Documentation from Texas Instruments
The following document provides information regarding Texas Instruments integrated circuits used in the
assembly of the BP-DAC11001EVM. This user's guide is available from the TI web site under literature
number SLAU806. Any letter appended to the literature number corresponds to the document revision that
is current at the time of the writing of this document. Newer revisions may be available from the TI web
site at http://www.ti.com/, or call the Texas Instruments Literature Response Center at (800) 477-8924 or
the Product Information Center at (972) 644-5580. When ordering, identify the document by both title and
literature number.
Table 3. Related Documentation
Document
Literature Number
DAC11001 product data sheet
SLASEL0
SLAU806 – October 2019
Submit Documentation Feedback
BP-DAC11001EVM
Copyright © 2019, Texas Instruments Incorporated
3
System Setup
2
System Setup
2.1
Software Setup
www.ti.com
This section provides the procedure for EVM software installation.
2.1.1
Software Installation
The EVM software is compatible with the Windows™ 7, 8, and 10 operating systems. The software is
available on the product folder, and can also be found in the GUI Composer Gallery. Search for BPDAC11001EVM in the GUI Composer Gallery. Use the down arrow symbol to download the software.
There are two downloads: BP-DAC11001EVM GUI and GUI Composer Runtime. Either download both, or
just download the EVM GUI; the runtime file can be downloaded through the EVM GUI during installation.
The software can also be run online; however, only after the firmware and driver are upgraded. After the
software is downloaded onto the PC, navigate to the download folder, and run the BP-DAC11001EVM
software executable, as shown in Figure 1.
Figure 1. BP-DAC11001EVM Software Setup
When the BP-DAC11001EVM software is launched, an installation dialog window opens and prompts the
user to select an installation directory. If left unchanged, the software location defaults to C:\Program Files
(x86)\Texas Instruments\BP-DAC11001 EVM, as shown in Figure 2. If there is no previous installation of
the GUI Composer Runtime application, the installer also requests for an automatic download from the
web. Select either Install from Web to download and install from the web, or Install from PC and provide
the path to the local file that is already downloaded. The runtime executable also installs the USB drivers,
unless the drivers are already installed.
The software installation automatically copies the required files and drivers to the local machine.
Figure 2. Software Installation Path
4
BP-DAC11001EVM
SLAU806 – October 2019
Submit Documentation Feedback
Copyright © 2019, Texas Instruments Incorporated
System Setup
www.ti.com
2.1.2
Launchpad Firmware Upgrade
Before using the software for the first time, upgrade the firmware for the launchpad. The firmware is
programmed to the launchpad using the online tool, UniFlash. This link is also provided on the Setup page
of the GUI. After unzipping the install_image_BP-DAC11001EVM.zip file, the firmware bin file is found at
<Download Directory>\BP-DAC11001EVM_1.0.1_installer_win\install_image_BP-DAC11001EVM\BPDAC11001EVM\firmware\acctrl.bin.
Follow the step-by-step procedure below to upgrade the firmware and install the device drivers
successfully:
1. Remove jumper JP6 on the launchpad, as shown in step 1 of Figure 3.
Remove
Jumper
xxx
xxx
xxx
1
2
3
4
Mount
Jumper
Figure 3. Launchpad Setup
2.
3.
4.
5.
Mount the jumper on 5V-OTG. Retain the jumper on 5V-XDS, as shown in step 1 of Figure 3.
Connect the USB cable to the port on the XDS110 side of the board, as shown in step 2 of Figure 3.
Connect the USB cable to PC and open UniFlash. Click on Start Now in the Detect Device section.
If the GUI Composer framework is being installed for the first time on the PC, the browser extension
and the TI Cloud Agent must also be installed. Follow the 2-step installation flow prompted on the web
page, as shown in Figure 4
Figure 4. TI Cloud Agent Installation
6. Press the Refresh or Finish button after the installation is complete. This action should detect the
launchpad.
7. Press Start and browse for <Download Directory>\BPDAC11001EVM_1.0.1_installer_win\install_image_BP-DAC11001EVM.\BPDAC11001EVM\firmware\acctrl.bin. Press Load Image followed by Verify Image.
SLAU806 – October 2019
Submit Documentation Feedback
BP-DAC11001EVM
Copyright © 2019, Texas Instruments Incorporated
5
System Setup
2.2
www.ti.com
Hardware Setup
This section provides the overall system setup for the EVM. The hardware setup contains the MSPEXP432E401Y launchpad and the BP-DAC11001EVM. A PC runs the software that provides an interface
to the BP-DAC11001EVM through the launchpad.
The BP-DAC11001EVM requires external power supplies, as described later in this document. The 3.3-V
and 5-V power supplies from the launchpad can be used for IOVDD and DVDD for the DAC, respectively,
using jumper options. The launchpad generates the digital signals used to communicate with the EVM
board.
Figure 5 displays the hardware setup.
Figure 5. Hardware Setup
6
BP-DAC11001EVM
SLAU806 – October 2019
Submit Documentation Feedback
Copyright © 2019, Texas Instruments Incorporated
System Setup
www.ti.com
2.2.1
Power Configurations and Jumper Settings
The BP-DAC11001EVM provides electrical connections to the device supply pins. The connectors and
optional configurations are shown in Table 4, and Table 5 shows the EVM jumper settings.
Table 4. BP-DAC11001EVM Power Supply Inputs
BP-DAC11001EVM Connector
Supply Name
J12
VCC
5 V to 15 V
Voltage Range
Test Point
TP21
J13
VSS
–5 V to –15 V
TP24
J14
VDD
4.5 V to 5.5 V
TP25
J15
VIO
2.7 V to 5.5 V (Option: 3V3 on the launchpad)
TP26
J17
GND
0V
TP27
J18
REF_PWR
5.3 V to 5.5 V
TP33
J19
REFGND
0V
TP34
Table 5. BP-DAC11001EVM Jumper Settings
Jumper
2.2.2
Description
Default Position
Alternative Position
J1
2x gain configuration
None
1-2 or 2-3
J2
Output amplifier feedback configuration
1-2, 3-4: external resistor and
capacitor connection
5-6, 7-8: embedded resistor connection
J4
LDAC pull-down
None
1-2: LDAC tied low
J5
CLR pull-down
None
1-2: CLR tied low
None
1-2: DAC output to auxiliary circuit; 2-3: DAC
output to filter input
J7
DAC output to load circuit connection
J8
AGND-OUT to FILTGND connection
None
1-2: AGND-OUT and FILTGND shorted
J11
DVDD connection
2-3: DVDD from AEVM_5V0
1-2: DVDD from VDD
J16
IOVDD connection
2-3: IOVDD from AEVM_3V3
1-2: IOVDD from VIO
2-3: REF_PWR from J18
1-2: REF_PWR from VCC. Make sure VCC
is < 6 V before using this option.
J20
REF_PWR connection
J25
Reference filter bypass
None
1-2: Bypass reference filter
J26
Reference source selection
2-3: Onboard reference
1-2: External reference (3 V to 10 V)
J30
REFGND connection
2-3: Through ground buffer
1-2: Do not use on the Rev A PCB
J31
Negative reference selection
2-3: Inverted reference source
1-2: Tied to ground (unipolar output mode)
Connecting the Hardware
After the launchpad firmware is upgraded as described in Section 2.1.2, and power and jumper
configurations done as per Section 2.2.1, the BP-DAC11001EVM and the launchpad can be connected as
shown in Figure 5. Connect the USB cable from the lauchpad OTG USB port (U7) to the PC.
2.2.3
Electrostatic Discharge Caution
Many of the components on the BP-DAC11001EVM and the launchpad are susceptible to damage by
electrostatic discharge (ESD). Observe proper ESD handling precautions when unpacking and handling
the EVM, including the use of a grounded wrist strap at an approved ESD workstation.
SLAU806 – October 2019
Submit Documentation Feedback
BP-DAC11001EVM
Copyright © 2019, Texas Instruments Incorporated
7
Detailed Description
www.ti.com
3
Detailed Description
3.1
Hardware Description
The following subsections provide detailed information on the EVM hardware and jumper configuration
settings.
3.1.1
Theory of Operation
The block diagram of the BP-DAC11001EVM board is displayed in Figure 6. The dotted lines indicate
different power and ground domains. All grounds are shorted together using single-point shorts. The EVM
board connects to the launchpad with the BoosterPack connectors. There is an onboard reference, using
the REF6250, that generates a 5-V voltage reference, that in turn is converted to 5-V and –5-V reference
inputs for the DAC. There is an option for an external reference using connectors J27 and J28. Both J27
and J28 form a force-sense pair that eliminate cable losses while connected to external reference
sources. The DAC output is provided on J3. Jumper J2 provides various feedback options for the output
amplifier. The DAC output can be taken through two-stage, second-order filters using connectors J7 and
J8. There is an option to interface an external circuit using auxiliary connectors J23 and J24.
VCC
REF_PWR
VIO
VDD
VSS
VCC
VSS
VDD
VIO
VREFP
VREFN
INTERFACE FOR
AUXILIARY
CIRCUIT
REFGND
AGND
VDD
DVDD
AGND
AUXGND
DGND
REF_PWR
REF_VCC
REF625 0
REF_VSS
RC
FILTER
VCC VSS DVDD IOVDD
FILT_VCC
AVDD OUT_VCC OUT_VSS
FILTER1
REFP
BUFFE RE D
DAC
OUTPUT
DAC110 01
EXTERNAL
REFERENCE
FILT_VSS
FILTER2
REFN
SW
REFGND
AGND
AGND
AGND-OUT
DGND
FILTGND
VDD
IOVDD
EXTERNAL
LDAC
SPI
AEV M_3V3
VDD
DVDD
AEV M_5V0
LAUNCHP AD
INTERFACE
DGND
Figure 6. BP-DAC11001EVM Hardware Block Diagram
8
BP-DAC11001EVM
SLAU806 – October 2019
Submit Documentation Feedback
Copyright © 2019, Texas Instruments Incorporated
Detailed Description
www.ti.com
3.1.2
Signal Definition for the Launchpad Interface
The BP-DAC11001EVM interfaces with the launchpad through connectors J9 and J10. The pin definitions
are shown in Figure 7.
Pin aligns with BoosterPack pinout standard
1
2
3v3
GND
LD AC
18
3
17
16
4
5
6
7
20
19
SDIN
SCL K
8
9
SDO
15
14
SYN C
13
12
11
10
21
22
5v
40
39
GND
38
37
23
24
CL R
25
26
36
35
27
28
34
33
29
30
32
31
Figure 7. Launchpad Interface Pinout
SLAU806 – October 2019
Submit Documentation Feedback
BP-DAC11001EVM
Copyright © 2019, Texas Instruments Incorporated
9
Detailed Description
3.2
www.ti.com
Software Description
This section describes the features of the BP-DAC11001EVM software, and discusses how to use these
features. The software provides basic control of all the registers and functions of the DAC11001 device.
3.2.1
Starting the Software
To launch the software, locate the Texas Instruments folder in the All Programs menu, and select the BPDAC11001EVM icon, as shown in Figure 8.
Figure 8. BP-DAC11001EVM GUI Location
Figure 9 shows that if the launchpad connector is connected correctly, the status bar at the bottom of the
screen displays Hardware Connected. If the launchpad is not properly connected or not connected at all,
the status bar displays Hardware not connected. In case the Hardware not connected status persists even
after the hardware is connected, go to Options → Serial Port, and change the port to the other available
port with the (Texas Instruments) or ACCtrl tag. One of the two ports with these tags will connect to the
hardware.
Figure 9. GUI Connection Detection
10
BP-DAC11001EVM
SLAU806 – October 2019
Submit Documentation Feedback
Copyright © 2019, Texas Instruments Incorporated
Detailed Description
www.ti.com
3.2.2
Software Features
The BP-DAC11001EVM incorporates interactive functions that help configure the DAC11001 device.
These functions are built into several GUI pages, as shown in the following sections. The Menu button
allows the user to switch between the pages, with each page representing a feature of the software.
3.2.2.1
Home Page
The Home page, shown in Figure 10, provides the basic information and navigation to other pages. Click
on Learn More... to get more information on the device.
Figure 10. Software Home Page
SLAU806 – October 2019
Submit Documentation Feedback
BP-DAC11001EVM
Copyright © 2019, Texas Instruments Incorporated
11
Detailed Description
3.2.2.2
www.ti.com
Setup Page
The Setup page, shown in Figure 11, guides the user to perform a one-time firmware upgrade for the
launchpad.
Figure 11. Setup Page
12
BP-DAC11001EVM
SLAU806 – October 2019
Submit Documentation Feedback
Copyright © 2019, Texas Instruments Incorporated
Detailed Description
www.ti.com
3.2.2.3
DAC Quick-Start Page
The DAC Quick-Start page provides the functions to quickly get started with the EVM. The basic
initialization settings are meant for basic dc operation; whereas, the advanced settings are meant for ac
functionality, such as settling time and total harmonic distortion (THD). Write a decimal code to the DAC
output input box to get the corresponding analog output.
Figure 12. DAC Quick-Start Page: Basic DAC Tab
SLAU806 – October 2019
Submit Documentation Feedback
BP-DAC11001EVM
Copyright © 2019, Texas Instruments Incorporated
13
Detailed Description
3.2.2.4
www.ti.com
Register Map Page
The Register Map page, shown in Figure 13, allows the user to access low-level communication directly
with the DAC11001 registers. Selecting a register on the Register Map list shows a description of the
values in that register, as well as information on the register address, default value, size, and current
value. Values are read from and written to the registers by writing to the Value or bit field of the GUI.
Figure 13. Register Map Page
There are some configuration lists and action buttons provided on the Register Map page. To store the
values of the register map locally, press the Save Registers button under the File menu option.
Additionally, recall and load the stored configuration files through the Load Registers button. Other options
selectable by the user are the Auto Read Interval, Read Register, Read All Registers, Write Register,
Write All Registers, and Update Mode buttons. These buttons are displayed in Figure 14. The Write
Register and Write All Registers buttons are enabled only with Deferred update mode. Deferred mode
initiates a write operation only when the Write Register or the Write All Registers button is pressed. By
default, the Immediate update mode is selected for the Register Map page write operations.
Figure 14. Register Page Options
14
BP-DAC11001EVM
SLAU806 – October 2019
Submit Documentation Feedback
Copyright © 2019, Texas Instruments Incorporated
Detailed Description
www.ti.com
3.2.2.5
Collateral Page
This page shown in Figure 15 provides links for all the collateral on the DAC11001 device.
Figure 15. Collateral Page
SLAU806 – October 2019
Submit Documentation Feedback
BP-DAC11001EVM
Copyright © 2019, Texas Instruments Incorporated
15
Schematic, PCB Layout, and Bill of Materials
4
www.ti.com
Schematic, PCB Layout, and Bill of Materials
This section contains the complete bill of materials and schematic diagram for the BP-DAC11001EVM.
4.1
BP-DAC11001EVM Schematic
Figure 16. Schematic Page 1
16
BP-DAC11001EVM
SLAU806 – October 2019
Submit Documentation Feedback
Copyright © 2019, Texas Instruments Incorporated
Schematic, PCB Layout, and Bill of Materials
www.ti.com
Figure 17. Schematic Page 2
SLAU806 – October 2019
Submit Documentation Feedback
BP-DAC11001EVM
Copyright © 2019, Texas Instruments Incorporated
17
Schematic, PCB Layout, and Bill of Materials
www.ti.com
Figure 18. Schematic Page 3
18
BP-DAC11001EVM
SLAU806 – October 2019
Submit Documentation Feedback
Copyright © 2019, Texas Instruments Incorporated
Schematic, PCB Layout, and Bill of Materials
www.ti.com
Figure 19. Schematic Page 4
SLAU806 – October 2019
Submit Documentation Feedback
BP-DAC11001EVM
Copyright © 2019, Texas Instruments Incorporated
19
Schematic, PCB Layout, and Bill of Materials
4.2
www.ti.com
PCB Layout
Figure 20 through Figure 25 show the layout details of the BP-DAC11001EVM board.
Figure 20. PCB Components: Top Overlay
Figure 21. PCB Components: Bottom Overlay
20
BP-DAC11001EVM
SLAU806 – October 2019
Submit Documentation Feedback
Copyright © 2019, Texas Instruments Incorporated
www.ti.com
Schematic, PCB Layout, and Bill of Materials
Figure 22. PCB Layout: Top Layer
Figure 23. PCB Layout: Ground Plane
SLAU806 – October 2019
Submit Documentation Feedback
BP-DAC11001EVM
Copyright © 2019, Texas Instruments Incorporated
21
Schematic, PCB Layout, and Bill of Materials
www.ti.com
Figure 24. PCB Layout: Power Plane
Figure 25. PCB Layout: Bottom Layer
22
BP-DAC11001EVM
SLAU806 – October 2019
Submit Documentation Feedback
Copyright © 2019, Texas Instruments Incorporated
Schematic, PCB Layout, and Bill of Materials
www.ti.com
4.3
BP-DAC11001EVM Bill of Materials
Table 6 lists the EVM bill of materials (BOM).
Table 6. BP-DAC11001EVM Bill of Materials
Designator
Quantity
Part Number
Manufacturer
!PCB1
1
C1, C47, C55
3
100pF
CAP, CERM, 100 pF, 50 V,
+/- 5%, C0G/NP0, 0603
0603
DC026
Any
885012006057
Wurth Elektronik
C2, C4, C7, C8, C9, C10,
C13, C16, C18, C28, C35,
C36, C39, C40, C44, C46,
C50, C51, C53, C54, C56,
C57, C58, C59
24
0.1uF
CAP, CERM, 0.1 uF, 50 V,
+/- 10%, X7R, 0603
0603
GRM188R71H104KA93D
MuRata
C5, C6
2
10uF
CAP, CERM, 10 uF, 10 V,
+/- 20%, X5R, 0603
0603
C1608X5R1A106M080AC
TDK
C11, C12, C14, C15, C17,
C19, C20, C21, C22, C23,
C29, C30
12
1uF
CAP, CERM, 1 uF, 50 V, +/10%, X7R, AEC-Q200
Grade 1, 0805
0805
CGA4J3X7R1H105K125AB
TDK
C24, C25, C26, C27, C31,
C42, C60, C61
8
10uF
CAP, CERM, 10 uF, 50 V,
+/- 10%, X7S, AEC-Q200
Grade 1, 1210
1210
CGA6P3X7S1H106K250AB
TDK
C32, C34
2
0.01uF
CAP, CERM, 0.01 uF, 50 V,
+/- 5%, C0G/NP0, 0603
0603
GRM1885C1H103JA01D
MuRata
C33, C37, C38
3
2700pF
CAP, CERM, 2700 pF, 25 V, 0805
+/- 5%, C0G/NP0, 0805
08053A272JAT2A
AVX
C41, C43, C45
3
1uF
CAP, Film, 1 uF, 16 V, +/20%, 1210 SMD
1210
ECPU1C105MA5
Panasonic
100V
Diode, Schottky, 100 V, 1 A,
AEC-Q101, SOD-123W
SOD-123W
PMEG10010ELRX
Nexperia
D1, D2, D3, D4, D5, D6, D7, 9
D8, D9
Value
Description
Package Reference
Printed Circuit Board
H1, H2, H3, H4
4
MACHINE SCREW PAN
PHILLIPS 4-40
Machine Screw, 4-40, 1/4
inch
MSSS 440 0025 PH
B and F Fastener
Supply
J1, J7, J11, J16, J20, J26,
J30, J31
8
Header, 100mil, 3x1, Gold,
SMT
Samtec_TSM-103-01-X-SV
TSM-103-01-L-SV
Samtec
J2
1
Header, 2.54mm, 4x2, Gold,
SMT
Header, 2.54mm, 4x2, SMT
TSM-104-01-L-DV
Samtec
J3, J6, J21, J22, J27, J28,
J29
7
Connector, SMA, TH
SMA
142-0701-231
Cinch Connectivity
J4, J5, J8, J25
4
Header, 100mil, 2x1, Gold
with Tin Tail, SMT
2x1 Header
TSM-102-01-L-SV
Samtec
J9, J10
2
Receptacle, 2.54mm, 10x2,
Tin, TH
Receptacle, 2.54mm, 10x2,
TH
ESQ-110-14-T-D
Samtec
J12, J13, J14, J15, J17,
J18, J19
7
Standard Banana Jack,
Uninsulated, 5.5mm
Keystone_575-4
575-4
Keystone
J23, J24
2
Receptacle, 100mil, 10x1,
Tin, TH
Receptacle, 10x1, 100mil,
Tin
PPTC101LFBN-RC
Sullins Connector
Solutions
SLAU806 – October 2019
Submit Documentation Feedback
Alternate Part
Number
Alternate
Manufacturer
BP-DAC11001EVM
Copyright © 2019, Texas Instruments Incorporated
23
Schematic, PCB Layout, and Bill of Materials
www.ti.com
Table 6. BP-DAC11001EVM Bill of Materials (continued)
Designator
Quantity
Value
Description
Package Reference
Part Number
Manufacturer
L1, L2, L3, L4, L5, L6, L7,
L8, L9
9
600 ohm
Ferrite Bead, 600 ohm at
100 MHz, 2.1 A, 0805
0805
74279220601
Wurth Elektronik
LBL1
1
Thermal Transfer Printable
Labels, 0.650" W x 0.200" H
- 10,000 per roll
PCB Label 0.650 x 0.200
inch
THT-14-423-10
Brady
R4, R5, R11, R12, R13,
R15, R16, R46, R52, R54
10
0
RES, 0, 1%, 0.1 W, AECQ200 Grade 0, 0603
0603
RMCF0603ZT0R00
Stackpole Electronics
Inc
R6
1
2.4k
RES, 2.4 k, 0.05%, 0.1 W,
AEC-Q200 Grade 0, 0603
0603
RG1608N-242-W-T1
Susumu Co Ltd
R7, R8, R9, R10
4
10.0k
RES, 10.0 k, 1%, 0.1 W,
0603
0603
RC0603FR-0710KL
Yageo
R14, R17, R18, R19, R20,
R21, R22, R23
8
33
RES, 33, 5%, 0.1 W, AECQ200 Grade 0, 0603
0603
CRCW060333R0JNEA
Vishay-Dale
R24, R25, R26, R27, R28,
R29, R30, R31, R32, R33,
R34, R35, R40
13
10
RES, 10, 5%, 0.1 W, AECQ200 Grade 0, 0603
0603
CRCW060310R0JNEA
Vishay-Dale
R36
1
2.49k
RES, 2.49 k, 1%, 0.1 W,
AEC-Q200 Grade 0, 0603
0603
CRCW06032K49FKEA
Vishay-Dale
R37
1
3.40k
RES, 3.40 k, 1%, 0.1 W,
AEC-Q200 Grade 0, 0603
0603
CRCW06033K40FKEA
Vishay-Dale
R38
1
866
RES, 866, 1%, 0.1 W, AECQ200 Grade 0, 0603
0603
CRCW0603866RFKEA
Vishay-Dale
R39
1
1.58k
RES, 1.58 k, 1%, 0.1 W,
AEC-Q200 Grade 0, 0603
0603
CRCW06031K58FKEA
Vishay-Dale
R41
1
0.51
RES, 0.51, 1%, 0.1 W, AEC- 0603
Q200 Grade 1, 0603
ERJ-3RQFR51V
Panasonic
R42
1
1.00
RES, 1.00, 1%, 0.1 W, 0603
0603
RC0603FR-071RL
Yageo
R43, R51
2
22
RES, 22.0, 0.1%, 0.063 W,
0603
0603
CPF0603B22RE1
TE Connectivity
R44
1
51k
RES, 51 k, 5%, 0.1 W, AEC- 0603
Q200 Grade 0, 0603
CRCW060351K0JNEA
Vishay-Dale
R47, R48
2
4.99k
RES, 4.99 k, 0.1%, 0.125
W, 0805
0805
RT0805BRD074K99L
Yageo America
R55, R56
2
1.00k
RES, 1.00 k, 0.01%, 0.15
W, 0603
0603
PLTU0603U1001LST5
Vishay-Dale
SH-JP1, SH-JP2, SH-JP3,
SH-JP4, SH-JP5, SH-JP6,
SH-JP7, SH-JP8, SH-JP9,
SH-JP10
10
1x2
Shunt, 100mil, Gold plated,
Black
Shunt
SNT-100-BK-G
Samtec
TP6, TP21, TP24, TP25,
TP26, TP27, TP28, TP29,
TP30, TP31, TP32, TP33,
TP34, TP35, TP36, TP37,
TP38, TP39, TP40, TP41,
TP42
21
Test Point, Compact, Red,
TH
Red Compact Testpoint
5005
Keystone
24
BP-DAC11001EVM
Alternate Part
Number
Alternate
Manufacturer
969102-0000-DA
3M
SLAU806 – October 2019
Submit Documentation Feedback
Copyright © 2019, Texas Instruments Incorporated
Schematic, PCB Layout, and Bill of Materials
www.ti.com
Table 6. BP-DAC11001EVM Bill of Materials (continued)
Designator
Quantity
U1
Value
Description
Package Reference
Part Number
Manufacturer
1
20-/18-/16-Bit, Low Noise,
Ultra Low Harmonic
Distortion, Fast Settling,
High-Voltage Output Digitalto-Analog Converters
(DACs), PFB0048A (TQFP48)
PFB0048A
DAC11001APFB
Texas Instruments
U2, U6, U7, U8, U9, U10
6
36-Volt, High-speed (45
MHz GBW and 150V/μs
SR), low-noise (4nV/√Hz)
RRO JFET operational
amplifier, D0008A (SOIC-8)
D0008A
OPA828IDR
Texas Instruments
U3, U4
0
1.1 nV/rtHz Noise, Low
Power, Precision
Operational Amplifier, 4.5 to
36 V, -40 to 85 degC, 8-pin
SOIC (D8), Green (RoHS &
no Sb/Br)
D0008A
OPA1611AID
Texas Instruments
U5
1
High-Precision Voltage
Reference with Integrated
High-Bandwidth Buffer,
DGK0008A (VSSOP-8)
DGK0008A
REF6250IDGKR
Texas Instruments
C3, C52
0
100pF
CAP, CERM, 100 pF, 50 V,
+/- 5%, C0G/NP0, 0603
0603
885012006057
Wurth Elektronik
C48, C49
0
10uF
CAP, Film, 10 uF, 63 V, +/10%, TH
18x17.5x9mm
B32522C106K
TDK
FID1, FID2, FID3
0
Fiducial mark. There is
nothing to buy or mount.
N/A
N/A
N/A
R1, R2, R3, R45, R49, R53
0
RES, 0, 1%, 0.1 W, AECQ200 Grade 0, 0603
0603
RMCF0603ZT0R00
Stackpole Electronics
Inc
0
SLAU806 – October 2019
Submit Documentation Feedback
Alternate Part
Number
Alternate
Manufacturer
REF6250IDGKT
Texas Instruments
BP-DAC11001EVM
Copyright © 2019, Texas Instruments Incorporated
25
STANDARD TERMS FOR EVALUATION MODULES
1.
Delivery: TI delivers TI evaluation boards, kits, or modules, including any accompanying demonstration software, components, and/or
documentation which may be provided together or separately (collectively, an “EVM” or “EVMs”) to the User (“User”) in accordance
with the terms set forth herein. User's acceptance of the EVM is expressly subject to the following terms.
1.1 EVMs are intended solely for product or software developers for use in a research and development setting to facilitate feasibility
evaluation, experimentation, or scientific analysis of TI semiconductors products. EVMs have no direct function and are not
finished products. EVMs shall not be directly or indirectly assembled as a part or subassembly in any finished product. For
clarification, any software or software tools provided with the EVM (“Software”) shall not be subject to the terms and conditions
set forth herein but rather shall be subject to the applicable terms that accompany such Software
1.2 EVMs are not intended for consumer or household use. EVMs may not be sold, sublicensed, leased, rented, loaned, assigned,
or otherwise distributed for commercial purposes by Users, in whole or in part, or used in any finished product or production
system.
2
Limited Warranty and Related Remedies/Disclaimers:
2.1 These terms do not apply to Software. The warranty, if any, for Software is covered in the applicable Software License
Agreement.
2.2 TI warrants that the TI EVM will conform to TI's published specifications for ninety (90) days after the date TI delivers such EVM
to User. Notwithstanding the foregoing, TI shall not be liable for a nonconforming EVM if (a) the nonconformity was caused by
neglect, misuse or mistreatment by an entity other than TI, including improper installation or testing, or for any EVMs that have
been altered or modified in any way by an entity other than TI, (b) the nonconformity resulted from User's design, specifications
or instructions for such EVMs or improper system design, or (c) User has not paid on time. Testing and other quality control
techniques are used to the extent TI deems necessary. TI does not test all parameters of each EVM.
User's claims against TI under this Section 2 are void if User fails to notify TI of any apparent defects in the EVMs within ten (10)
business days after delivery, or of any hidden defects with ten (10) business days after the defect has been detected.
2.3 TI's sole liability shall be at its option to repair or replace EVMs that fail to conform to the warranty set forth above, or credit
User's account for such EVM. TI's liability under this warranty shall be limited to EVMs that are returned during the warranty
period to the address designated by TI and that are determined by TI not to conform to such warranty. If TI elects to repair or
replace such EVM, TI shall have a reasonable time to repair such EVM or provide replacements. Repaired EVMs shall be
warranted for the remainder of the original warranty period. Replaced EVMs shall be warranted for a new full ninety (90) day
warranty period.
WARNING
Evaluation Kits are intended solely for use by technically qualified,
professional electronics experts who are familiar with the dangers
and application risks associated with handling electrical mechanical
components, systems, and subsystems.
User shall operate the Evaluation Kit within TI’s recommended
guidelines and any applicable legal or environmental requirements
as well as reasonable and customary safeguards. Failure to set up
and/or operate the Evaluation Kit within TI’s recommended
guidelines may result in personal injury or death or property
damage. Proper set up entails following TI’s instructions for
electrical ratings of interface circuits such as input, output and
electrical loads.
NOTE:
EXPOSURE TO ELECTROSTATIC DISCHARGE (ESD) MAY CAUSE DEGREDATION OR FAILURE OF THE EVALUATION
KIT; TI RECOMMENDS STORAGE OF THE EVALUATION KIT IN A PROTECTIVE ESD BAG.
www.ti.com
3
Regulatory Notices:
3.1 United States
3.1.1
Notice applicable to EVMs not FCC-Approved:
FCC NOTICE: This kit is designed to allow product developers to evaluate electronic components, circuitry, or software
associated with the kit to determine whether to incorporate such items in a finished product and software developers to write
software applications for use with the end product. This kit is not a finished product and when assembled may not be resold or
otherwise marketed unless all required FCC equipment authorizations are first obtained. Operation is subject to the condition
that this product not cause harmful interference to licensed radio stations and that this product accept harmful interference.
Unless the assembled kit is designed to operate under part 15, part 18 or part 95 of this chapter, the operator of the kit must
operate under the authority of an FCC license holder or must secure an experimental authorization under part 5 of this chapter.
3.1.2
For EVMs annotated as FCC – FEDERAL COMMUNICATIONS COMMISSION Part 15 Compliant:
CAUTION
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not
cause harmful interference, and (2) this device must accept any interference received, including interference that may cause
undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to
operate the equipment.
FCC Interference Statement for Class A EVM devices
NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of
the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is
operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to
correct the interference at his own expense.
FCC Interference Statement for Class B EVM devices
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of
the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more
of the following measures:
•
•
•
•
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
3.2 Canada
3.2.1
For EVMs issued with an Industry Canada Certificate of Conformance to RSS-210 or RSS-247
Concerning EVMs Including Radio Transmitters:
This device complies with Industry Canada license-exempt RSSs. Operation is subject to the following two conditions:
(1) this device may not cause interference, and (2) this device must accept any interference, including interference that may
cause undesired operation of the device.
Concernant les EVMs avec appareils radio:
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation
est autorisée aux deux conditions suivantes: (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit
accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.
Concerning EVMs Including Detachable Antennas:
Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser)
gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type
and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for
successful communication. This radio transmitter has been approved by Industry Canada to operate with the antenna types
listed in the user guide with the maximum permissible gain and required antenna impedance for each antenna type indicated.
Antenna types not included in this list, having a gain greater than the maximum gain indicated for that type, are strictly prohibited
for use with this device.
2
www.ti.com
Concernant les EVMs avec antennes détachables
Conformément à la réglementation d'Industrie Canada, le présent émetteur radio peut fonctionner avec une antenne d'un type et
d'un gain maximal (ou inférieur) approuvé pour l'émetteur par Industrie Canada. Dans le but de réduire les risques de brouillage
radioélectrique à l'intention des autres utilisateurs, il faut choisir le type d'antenne et son gain de sorte que la puissance isotrope
rayonnée équivalente (p.i.r.e.) ne dépasse pas l'intensité nécessaire à l'établissement d'une communication satisfaisante. Le
présent émetteur radio a été approuvé par Industrie Canada pour fonctionner avec les types d'antenne énumérés dans le
manuel d’usage et ayant un gain admissible maximal et l'impédance requise pour chaque type d'antenne. Les types d'antenne
non inclus dans cette liste, ou dont le gain est supérieur au gain maximal indiqué, sont strictement interdits pour l'exploitation de
l'émetteur
3.3 Japan
3.3.1
Notice for EVMs delivered in Japan: Please see http://www.tij.co.jp/lsds/ti_ja/general/eStore/notice_01.page 日本国内に
輸入される評価用キット、ボードについては、次のところをご覧ください。
http://www.tij.co.jp/lsds/ti_ja/general/eStore/notice_01.page
3.3.2
Notice for Users of EVMs Considered “Radio Frequency Products” in Japan: EVMs entering Japan may not be certified
by TI as conforming to Technical Regulations of Radio Law of Japan.
If User uses EVMs in Japan, not certified to Technical Regulations of Radio Law of Japan, User is required to follow the
instructions set forth by Radio Law of Japan, which includes, but is not limited to, the instructions below with respect to EVMs
(which for the avoidance of doubt are stated strictly for convenience and should be verified by User):
1.
2.
3.
Use EVMs in a shielded room or any other test facility as defined in the notification #173 issued by Ministry of Internal
Affairs and Communications on March 28, 2006, based on Sub-section 1.1 of Article 6 of the Ministry’s Rule for
Enforcement of Radio Law of Japan,
Use EVMs only after User obtains the license of Test Radio Station as provided in Radio Law of Japan with respect to
EVMs, or
Use of EVMs only after User obtains the Technical Regulations Conformity Certification as provided in Radio Law of Japan
with respect to EVMs. Also, do not transfer EVMs, unless User gives the same notice above to the transferee. Please note
that if User does not follow the instructions above, User will be subject to penalties of Radio Law of Japan.
【無線電波を送信する製品の開発キットをお使いになる際の注意事項】 開発キットの中には技術基準適合証明を受けて
いないものがあります。 技術適合証明を受けていないもののご使用に際しては、電波法遵守のため、以下のいずれかの
措置を取っていただく必要がありますのでご注意ください。
1.
2.
3.
電波法施行規則第6条第1項第1号に基づく平成18年3月28日総務省告示第173号で定められた電波暗室等の試験設備でご使用
いただく。
実験局の免許を取得後ご使用いただく。
技術基準適合証明を取得後ご使用いただく。
なお、本製品は、上記の「ご使用にあたっての注意」を譲渡先、移転先に通知しない限り、譲渡、移転できないものとします。
上記を遵守頂けない場合は、電波法の罰則が適用される可能性があることをご留意ください。 日本テキサス・イ
ンスツルメンツ株式会社
東京都新宿区西新宿6丁目24番1号
西新宿三井ビル
3.3.3
Notice for EVMs for Power Line Communication: Please see http://www.tij.co.jp/lsds/ti_ja/general/eStore/notice_02.page
電力線搬送波通信についての開発キットをお使いになる際の注意事項については、次のところをご覧ください。http:/
/www.tij.co.jp/lsds/ti_ja/general/eStore/notice_02.page
3.4 European Union
3.4.1
For EVMs subject to EU Directive 2014/30/EU (Electromagnetic Compatibility Directive):
This is a class A product intended for use in environments other than domestic environments that are connected to a
low-voltage power-supply network that supplies buildings used for domestic purposes. In a domestic environment this
product may cause radio interference in which case the user may be required to take adequate measures.
3
www.ti.com
4
EVM Use Restrictions and Warnings:
4.1 EVMS ARE NOT FOR USE IN FUNCTIONAL SAFETY AND/OR SAFETY CRITICAL EVALUATIONS, INCLUDING BUT NOT
LIMITED TO EVALUATIONS OF LIFE SUPPORT APPLICATIONS.
4.2 User must read and apply the user guide and other available documentation provided by TI regarding the EVM prior to handling
or using the EVM, including without limitation any warning or restriction notices. The notices contain important safety information
related to, for example, temperatures and voltages.
4.3 Safety-Related Warnings and Restrictions:
4.3.1
User shall operate the EVM within TI’s recommended specifications and environmental considerations stated in the user
guide, other available documentation provided by TI, and any other applicable requirements and employ reasonable and
customary safeguards. Exceeding the specified performance ratings and specifications (including but not limited to input
and output voltage, current, power, and environmental ranges) for the EVM may cause personal injury or death, or
property damage. If there are questions concerning performance ratings and specifications, User should contact a TI
field representative prior to connecting interface electronics including input power and intended loads. Any loads applied
outside of the specified output range may also result in unintended and/or inaccurate operation and/or possible
permanent damage to the EVM and/or interface electronics. Please consult the EVM user guide prior to connecting any
load to the EVM output. If there is uncertainty as to the load specification, please contact a TI field representative.
During normal operation, even with the inputs and outputs kept within the specified allowable ranges, some circuit
components may have elevated case temperatures. These components include but are not limited to linear regulators,
switching transistors, pass transistors, current sense resistors, and heat sinks, which can be identified using the
information in the associated documentation. When working with the EVM, please be aware that the EVM may become
very warm.
4.3.2
EVMs are intended solely for use by technically qualified, professional electronics experts who are familiar with the
dangers and application risks associated with handling electrical mechanical components, systems, and subsystems.
User assumes all responsibility and liability for proper and safe handling and use of the EVM by User or its employees,
affiliates, contractors or designees. User assumes all responsibility and liability to ensure that any interfaces (electronic
and/or mechanical) between the EVM and any human body are designed with suitable isolation and means to safely
limit accessible leakage currents to minimize the risk of electrical shock hazard. User assumes all responsibility and
liability for any improper or unsafe handling or use of the EVM by User or its employees, affiliates, contractors or
designees.
4.4 User assumes all responsibility and liability to determine whether the EVM is subject to any applicable international, federal,
state, or local laws and regulations related to User’s handling and use of the EVM and, if applicable, User assumes all
responsibility and liability for compliance in all respects with such laws and regulations. User assumes all responsibility and
liability for proper disposal and recycling of the EVM consistent with all applicable international, federal, state, and local
requirements.
5.
Accuracy of Information: To the extent TI provides information on the availability and function of EVMs, TI attempts to be as accurate
as possible. However, TI does not warrant the accuracy of EVM descriptions, EVM availability or other information on its websites as
accurate, complete, reliable, current, or error-free.
6.
Disclaimers:
6.1 EXCEPT AS SET FORTH ABOVE, EVMS AND ANY MATERIALS PROVIDED WITH THE EVM (INCLUDING, BUT NOT
LIMITED TO, REFERENCE DESIGNS AND THE DESIGN OF THE EVM ITSELF) ARE PROVIDED "AS IS" AND "WITH ALL
FAULTS." TI DISCLAIMS ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, REGARDING SUCH ITEMS, INCLUDING BUT
NOT LIMITED TO ANY EPIDEMIC FAILURE WARRANTY OR IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS
FOR A PARTICULAR PURPOSE OR NON-INFRINGEMENT OF ANY THIRD PARTY PATENTS, COPYRIGHTS, TRADE
SECRETS OR OTHER INTELLECTUAL PROPERTY RIGHTS.
6.2 EXCEPT FOR THE LIMITED RIGHT TO USE THE EVM SET FORTH HEREIN, NOTHING IN THESE TERMS SHALL BE
CONSTRUED AS GRANTING OR CONFERRING ANY RIGHTS BY LICENSE, PATENT, OR ANY OTHER INDUSTRIAL OR
INTELLECTUAL PROPERTY RIGHT OF TI, ITS SUPPLIERS/LICENSORS OR ANY OTHER THIRD PARTY, TO USE THE
EVM IN ANY FINISHED END-USER OR READY-TO-USE FINAL PRODUCT, OR FOR ANY INVENTION, DISCOVERY OR
IMPROVEMENT, REGARDLESS OF WHEN MADE, CONCEIVED OR ACQUIRED.
7.
4
USER'S INDEMNITY OBLIGATIONS AND REPRESENTATIONS. USER WILL DEFEND, INDEMNIFY AND HOLD TI, ITS
LICENSORS AND THEIR REPRESENTATIVES HARMLESS FROM AND AGAINST ANY AND ALL CLAIMS, DAMAGES, LOSSES,
EXPENSES, COSTS AND LIABILITIES (COLLECTIVELY, "CLAIMS") ARISING OUT OF OR IN CONNECTION WITH ANY
HANDLING OR USE OF THE EVM THAT IS NOT IN ACCORDANCE WITH THESE TERMS. THIS OBLIGATION SHALL APPLY
WHETHER CLAIMS ARISE UNDER STATUTE, REGULATION, OR THE LAW OF TORT, CONTRACT OR ANY OTHER LEGAL
THEORY, AND EVEN IF THE EVM FAILS TO PERFORM AS DESCRIBED OR EXPECTED.
www.ti.com
8.
Limitations on Damages and Liability:
8.1 General Limitations. IN NO EVENT SHALL TI BE LIABLE FOR ANY SPECIAL, COLLATERAL, INDIRECT, PUNITIVE,
INCIDENTAL, CONSEQUENTIAL, OR EXEMPLARY DAMAGES IN CONNECTION WITH OR ARISING OUT OF THESE
TERMS OR THE USE OF THE EVMS , REGARDLESS OF WHETHER TI HAS BEEN ADVISED OF THE POSSIBILITY OF
SUCH DAMAGES. EXCLUDED DAMAGES INCLUDE, BUT ARE NOT LIMITED TO, COST OF REMOVAL OR
REINSTALLATION, ANCILLARY COSTS TO THE PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES, RETESTING,
OUTSIDE COMPUTER TIME, LABOR COSTS, LOSS OF GOODWILL, LOSS OF PROFITS, LOSS OF SAVINGS, LOSS OF
USE, LOSS OF DATA, OR BUSINESS INTERRUPTION. NO CLAIM, SUIT OR ACTION SHALL BE BROUGHT AGAINST TI
MORE THAN TWELVE (12) MONTHS AFTER THE EVENT THAT GAVE RISE TO THE CAUSE OF ACTION HAS
OCCURRED.
8.2 Specific Limitations. IN NO EVENT SHALL TI'S AGGREGATE LIABILITY FROM ANY USE OF AN EVM PROVIDED
HEREUNDER, INCLUDING FROM ANY WARRANTY, INDEMITY OR OTHER OBLIGATION ARISING OUT OF OR IN
CONNECTION WITH THESE TERMS, , EXCEED THE TOTAL AMOUNT PAID TO TI BY USER FOR THE PARTICULAR
EVM(S) AT ISSUE DURING THE PRIOR TWELVE (12) MONTHS WITH RESPECT TO WHICH LOSSES OR DAMAGES ARE
CLAIMED. THE EXISTENCE OF MORE THAN ONE CLAIM SHALL NOT ENLARGE OR EXTEND THIS LIMIT.
9.
Return Policy. Except as otherwise provided, TI does not offer any refunds, returns, or exchanges. Furthermore, no return of EVM(s)
will be accepted if the package has been opened and no return of the EVM(s) will be accepted if they are damaged or otherwise not in
a resalable condition. If User feels it has been incorrectly charged for the EVM(s) it ordered or that delivery violates the applicable
order, User should contact TI. All refunds will be made in full within thirty (30) working days from the return of the components(s),
excluding any postage or packaging costs.
10. Governing Law: These terms and conditions shall be governed by and interpreted in accordance with the laws of the State of Texas,
without reference to conflict-of-laws principles. User agrees that non-exclusive jurisdiction for any dispute arising out of or relating to
these terms and conditions lies within courts located in the State of Texas and consents to venue in Dallas County, Texas.
Notwithstanding the foregoing, any judgment may be enforced in any United States or foreign court, and TI may seek injunctive relief
in any United States or foreign court.
Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265
Copyright © 2019, Texas Instruments Incorporated
5
IMPORTANT NOTICE AND DISCLAIMER
TI PROVIDES TECHNICAL AND RELIABILITY DATA (INCLUDING DATASHEETS), DESIGN RESOURCES (INCLUDING REFERENCE
DESIGNS), APPLICATION OR OTHER DESIGN ADVICE, WEB TOOLS, SAFETY INFORMATION, AND OTHER RESOURCES “AS IS”
AND WITH ALL FAULTS, AND DISCLAIMS ALL WARRANTIES, EXPRESS AND IMPLIED, INCLUDING WITHOUT LIMITATION ANY
IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NON-INFRINGEMENT OF THIRD
PARTY INTELLECTUAL PROPERTY RIGHTS.
These resources are intended for skilled developers designing with TI products. You are solely responsible for (1) selecting the appropriate
TI products for your application, (2) designing, validating and testing your application, and (3) ensuring your application meets applicable
standards, and any other safety, security, or other requirements. These resources are subject to change without notice. TI grants you
permission to use these resources only for development of an application that uses the TI products described in the resource. Other
reproduction and display of these resources is prohibited. No license is granted to any other TI intellectual property right or to any third
party intellectual property right. TI disclaims responsibility for, and you will fully indemnify TI and its representatives against, any claims,
damages, costs, losses, and liabilities arising out of your use of these resources.
TI’s products are provided subject to TI’s Terms of Sale (www.ti.com/legal/termsofsale.html) or other applicable terms available either on
ti.com or provided in conjunction with such TI products. TI’s provision of these resources does not expand or otherwise alter TI’s applicable
warranties or warranty disclaimers for TI products.
Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265
Copyright © 2019, Texas Instruments Incorporated
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising