Texas Instruments | DS9637A Dual Differential Line Receiver (Rev. D) | Datasheet | Texas Instruments DS9637A Dual Differential Line Receiver (Rev. D) Datasheet

Texas Instruments DS9637A Dual Differential Line Receiver (Rev. D) Datasheet
DS9637A
www.ti.com
SNLS388D – MAY 1998 – REVISED APRIL 2013
DS9637A Dual Differential Line Receiver
Check for Samples: DS9637A
FEATURES
DESCRIPTION
•
•
•
•
•
•
•
•
•
The DS9637A is a Schottky dual differential line
receiver which has been specifically designed to
satisfy the requirements of EIA Standards RS-422
and RS-423. In addition, the DS9637A satisfies the
requirements of MIL-STD 188-114 and is compatible
with
the
International
Standard
CCITT
recommendations. The DS9637A is suitable for use
as a line receiver in digital data systems, using either
single ended or differential, unipolar or bipolar
transmission. It requires a single 5V power supply
and has Schottky TTL compatible outputs. The
DS9637A has an operational input common mode
range of ±7V either differentially or to ground.
1
2
Dual Channel
Single 5V Supply
Satisfies EIA Standards RS-422 and RS423
Built-in ±35 mV Hysteresis
High Input Common Mode Voltage Range
High Input impedance
TTL Compatible Outputs
Schottky Technology
Extended Temperature Range
Connection Diagram
Top View
Figure 1. 8-Lead SOIC (D Package)
8-Lead PDIP (P Package)
For Complete Military Product Specifications,
refer to the appropriate SMD or MDS.
8-Lead CDIP (NAB Package)
1
2
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
All trademarks are the property of their respective owners.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 1998–2013, Texas Instruments Incorporated
DS9637A
SNLS388D – MAY 1998 – REVISED APRIL 2013
www.ti.com
These devices have limited built-in ESD protection. The leads should be shorted together or the device placed in conductive foam
during storage or handling to prevent electrostatic damage to the MOS gates.
Absolute Maximum Ratings (1) (2)
Storage Temperature Range
CDIP
−65°C to + 175°C
PDIP
−65°C to + 150°C
Lead Temperature
CDIP
(Soldering, 30 seconds)
300°C
PDIP and SOIC Packages
(Soldering, 10 seconds)
265°C
Maximum Power Dissipation (3) at 25°C
CDIP
1300 mW
PDIP
930 mW
SOIC
810 mW
−0.5V to 7.0V
VCC Lead Potential to Ground
Input Potential to Ground
±15V
Differential Input Voltage
±15V
−0.5V to +5.5V
Output Potential to Ground
Output Sink Current
50 mA
≥2 kV
ESD Susceptibility, HBM
(1)
(2)
(3)
Absolute Maximum Ratings are those values beyond which the safety of the device cannot be ensured. They are not meant to imply that
the devices should be operated at these limits. The tables of “Electrical Characteristics” provide conditions for actual device operation.
If Military/Aerospace specified devices are required, please contact the Texas Instruments Sales Office/ Distributors for availability and
specifications.
Derate CDIP 8.7 mW/°C above 25°C; derate PDIP 7.5 mW/°C above 25°C; derate SOIC package 6.5 mW/°C above 25°C.
Recommended Operating Conditions
DS9637AM
Supply Voltage (VCC)
Operating Temperature (TA)
Min
Max
Units
4.5
5.5
V
−55
+125
°C
4.75
5.25
V
0
+70
°C
DS9637AC
Supply Voltage (VCC)
Operating Temperature (TA)
2
Submit Documentation Feedback
Copyright © 1998–2013, Texas Instruments Incorporated
Product Folder Links: DS9637A
DS9637A
www.ti.com
SNLS388D – MAY 1998 – REVISED APRIL 2013
Electrical Characteristics (1) (2)
Over recommended operating temperature and supply voltage ranges, unless otherwise specified
Symbol
Parameter
Conditions
Min
Typ
Max
Units
VTH
Differential Input Threshold
Voltage (3)
−7.0V ≤ VCM ≤ +7.0V
−0.2
+0.2
V
VTH(R)
Differential Input Threshold
Voltage (4)
−7.0V ≤ VCM ≤ +7.0V
−0.4
+0.4
V
II
Input Current (5)
VI = 10V, 0V ≤ VCC ≤ +5.5V
1.1
3.25
mA
VI = −10V, 0V ≤ VCC ≤ +5.5V
−1.6
−3.25
0.35
0.5
V
VOL
Output Voltage LOW
IOL = 20 mA, VCC = Min
VOH
Output Voltage HIGH
IOH = −1.0 mA, VCC = Min
2.5
3.5
IOS
Output Short Circuit Current (6)
VO = 0V, VCC = Max
−40
−75
−100
mA
ICC
Supply Current
VCC = Max, VI+ = 0.5V,
35
50
mA
V
VI− = GND
VHYST
Input Hysteresis
VCM = ±7.0V (See Curves)
70
mV
Unless otherwise specified Min/Max limits apply across the −55°C to +125°C temperature range for DS9637AM and across the 0°C to
+70°C range for the DS9637ASC. All typicals are given for VCC = 5V and TA = 25°C.
All currents into the device pins are positive; all currents out of the device pins are negative. All voltages are referenced to ground
unless otherwise specified.
VDIFF (Differential Input Voltage) = (VI+) − (VI−). VCM (Common Mode Input Voltage) = VI+ or VI−.
500Ω ±1% in series with inputs.
The input not under test is tied to ground.
Only one output at a time should be shorted.
(1)
(2)
(3)
(4)
(5)
(6)
Switching Characteristics
VCC = 5.0V, TA = 25°C
Symbol
Parameter
Conditions
tPLH
Propagation Delay Time
Low to High
See AC Test Circuit
tPHL
Propagation Delay Time
High to Low
See AC Test Circuit
Min
Typ
Max
Units
15
25
ns
13
25
ns
Submit Documentation Feedback
Copyright © 1998–2013, Texas Instruments Incorporated
Product Folder Links: DS9637A
3
DS9637A
SNLS388D – MAY 1998 – REVISED APRIL 2013
www.ti.com
Equivalent Circuit
Figure 2. Equivalent Circuit
Typical Input/Output Transfer Characteristics
Figure 3.
4
Figure 4.
Submit Documentation Feedback
Copyright © 1998–2013, Texas Instruments Incorporated
Product Folder Links: DS9637A
DS9637A
www.ti.com
SNLS388D – MAY 1998 – REVISED APRIL 2013
AC TEST CIRCUIT AND WAVEFORMS
Notes:
CL includes jig and probe capacitance.
All diodes are FD700 or equivalent.
Figure 5. AC Test Circuit and Waveforms
VI
Amplitude: 1.0V
Offset: 0.5V
Pulse Width: 100 ns
PRR: 5.0 MHz
tr = tf ≤ 5.0 ns
Figure 6. Typical Applications
Notes:
RT ≥ 50Ω for RS-422 operation.
RT combined with input impedance of receivers must be greater than 90Ω.
Figure 7. RS-422 System Application (FIPS 1020) Differential Simplex Bus Transmission
Submit Documentation Feedback
Copyright © 1998–2013, Texas Instruments Incorporated
Product Folder Links: DS9637A
5
DS9637A
SNLS388D – MAY 1998 – REVISED APRIL 2013
www.ti.com
REVISION HISTORY
Changes from Revision C (April 2013) to Revision D
•
6
Page
Changed layout of National Data Sheet to TI format ............................................................................................................ 5
Submit Documentation Feedback
Copyright © 1998–2013, Texas Instruments Incorporated
Product Folder Links: DS9637A
IMPORTANT NOTICE
Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, enhancements, improvements and other
changes to its semiconductor products and services per JESD46, latest issue, and to discontinue any product or service per JESD48, latest
issue. Buyers should obtain the latest relevant information before placing orders and should verify that such information is current and
complete. All semiconductor products (also referred to herein as “components”) are sold subject to TI’s terms and conditions of sale
supplied at the time of order acknowledgment.
TI warrants performance of its components to the specifications applicable at the time of sale, in accordance with the warranty in TI’s terms
and conditions of sale of semiconductor products. Testing and other quality control techniques are used to the extent TI deems necessary
to support this warranty. Except where mandated by applicable law, testing of all parameters of each component is not necessarily
performed.
TI assumes no liability for applications assistance or the design of Buyers’ products. Buyers are responsible for their products and
applications using TI components. To minimize the risks associated with Buyers’ products and applications, Buyers should provide
adequate design and operating safeguards.
TI does not warrant or represent that any license, either express or implied, is granted under any patent right, copyright, mask work right, or
other intellectual property right relating to any combination, machine, or process in which TI components or services are used. Information
published by TI regarding third-party products or services does not constitute a license to use such products or services or a warranty or
endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the
third party, or a license from TI under the patents or other intellectual property of TI.
Reproduction of significant portions of TI information in TI data books or data sheets is permissible only if reproduction is without alteration
and is accompanied by all associated warranties, conditions, limitations, and notices. TI is not responsible or liable for such altered
documentation. Information of third parties may be subject to additional restrictions.
Resale of TI components or services with statements different from or beyond the parameters stated by TI for that component or service
voids all express and any implied warranties for the associated TI component or service and is an unfair and deceptive business practice.
TI is not responsible or liable for any such statements.
Buyer acknowledges and agrees that it is solely responsible for compliance with all legal, regulatory and safety-related requirements
concerning its products, and any use of TI components in its applications, notwithstanding any applications-related information or support
that may be provided by TI. Buyer represents and agrees that it has all the necessary expertise to create and implement safeguards which
anticipate dangerous consequences of failures, monitor failures and their consequences, lessen the likelihood of failures that might cause
harm and take appropriate remedial actions. Buyer will fully indemnify TI and its representatives against any damages arising out of the use
of any TI components in safety-critical applications.
In some cases, TI components may be promoted specifically to facilitate safety-related applications. With such components, TI’s goal is to
help enable customers to design and create their own end-product solutions that meet applicable functional safety standards and
requirements. Nonetheless, such components are subject to these terms.
No TI components are authorized for use in FDA Class III (or similar life-critical medical equipment) unless authorized officers of the parties
have executed a special agreement specifically governing such use.
Only those TI components which TI has specifically designated as military grade or “enhanced plastic” are designed and intended for use in
military/aerospace applications or environments. Buyer acknowledges and agrees that any military or aerospace use of TI components
which have not been so designated is solely at the Buyer's risk, and that Buyer is solely responsible for compliance with all legal and
regulatory requirements in connection with such use.
TI has specifically designated certain components as meeting ISO/TS16949 requirements, mainly for automotive use. In any case of use of
non-designated products, TI will not be responsible for any failure to meet ISO/TS16949.
Products
Applications
Audio
www.ti.com/audio
Automotive and Transportation
www.ti.com/automotive
Amplifiers
amplifier.ti.com
Communications and Telecom
www.ti.com/communications
Data Converters
dataconverter.ti.com
Computers and Peripherals
www.ti.com/computers
DLP® Products
www.dlp.com
Consumer Electronics
www.ti.com/consumer-apps
DSP
dsp.ti.com
Energy and Lighting
www.ti.com/energy
Clocks and Timers
www.ti.com/clocks
Industrial
www.ti.com/industrial
Interface
interface.ti.com
Medical
www.ti.com/medical
Logic
logic.ti.com
Security
www.ti.com/security
Power Mgmt
power.ti.com
Space, Avionics and Defense
www.ti.com/space-avionics-defense
Microcontrollers
microcontroller.ti.com
Video and Imaging
www.ti.com/video
RFID
www.ti-rfid.com
OMAP Applications Processors
www.ti.com/omap
TI E2E Community
e2e.ti.com
Wireless Connectivity
www.ti.com/wirelessconnectivity
Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265
Copyright © 2013, Texas Instruments Incorporated
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Related manuals

Download PDF

advertising