Texas Instruments | Single Power Supply 2-INPUT POSITIVE AND GATE CMOS Logic Level Shifter (Rev. B) | Datasheet | Texas Instruments Single Power Supply 2-INPUT POSITIVE AND GATE CMOS Logic Level Shifter (Rev. B) Datasheet

Texas Instruments Single Power Supply 2-INPUT POSITIVE AND GATE CMOS Logic Level Shifter (Rev. B) Datasheet
Product
Folder
Sample &
Buy
Technical
Documents
Support &
Community
Tools &
Software
SN74LV1T08
SCLS739B – SEPTEMBER 2013 – REVISED FEBRUARY 2014
SN74LV1T08 Single Power Supply 2-Input Positive AND Gate CMOS Logic Level Shifter
1 Features
2 Applications
•
•
•
•
•
•
•
1
•
•
•
•
•
•
•
•
•
•
•
•
•
(1)
Single-Supply Voltage Translator at
5.0/3.3/2.5/1.8V VCC
Operating Range of 1.8V to 5.5V
Up Translation
– 1.2V(1) to 1.8V at 1.8V VCC
– 1.5V(1) to 2.5V at 2.5V VCC
– 1.8V(1) to 3.3V at 3.3V VCC
– 3.3V to 5.0V at 5.0V VCC
Down Translation
– 3.3V to 1.8V at 1.8V VCC
– 3.3V to 2.5V at 2.5V VCC
– 5.0V to 3.3V at 3.3V VCC
Logic Output is Referenced to VCC
Output Drive
– 8mA Output Drive at 5V
– 7mA Output Drive at 3.3V
– 3mA Output Drive at 1.8V
Characterized up to 50MHz at 3.3V VCC
5V Tolerance on Input Pins
–40°C to 125°C Operating Temperature Range
Pb-Free Packages Available: SC-70 (DCK)
– 2 × 2.1 × 0.65 mm (Height 1.1mm)
Latch-Up Performance Exceeds 250mA Per
JESD 17
ESD Performance Tested Per JESD 22
– 2000-V Human-Body Model
(A114-B, Class II)
– 200-V Machine Model (A115-A)
– 1000-V Charged-Device Model (C101)
Supports Standard Logic Pinouts
CMOS Output B Compatible with AUP1G and
LVC1G Families
Refer to the VIH/VIL and output drive for lower VCC condition.
Industrial controllers
Telecom
Portable applications
Servers
PC and notebooks
Automotive
3 Description
SN74LV1T08 is a low voltage CMOS gate logic that
operates at a wider voltage range for industrial,
portable, telecom, and automotive applications. The
output level is referenced to the supply voltage and is
able to support 1.8V/2.5V/3.3V/5V CMOS levels.
The input is designed with a lower threshold circuit to
match 1.8V input logic at VCC = 3.3V and can be used
in 1.8V to 3.3V level up translation. In addition, the
5V tolerant input pins enable down translation (e.g.
3.3V to 2.5V output at VCC = 2.5V). The wide VCC
range of 1.8V to 5.5V allows generation of desired
output levels to connect to controllers or processors.
The SN74LV1T08 is designed with current-drive
capability of 8 mA to reduce line reflections,
overshoot, and undershoot caused by high-drive
outputs.
Device Information
ORDER NUMBER
PACKAGE
BODY SIZE
SN74LV1T08DBVR
SOT-23 (5)
2,90mm x 1,60mm
SN74LV1T08DCKR
SC70 (5)
2,00mm x 1,25mm
DCK or DBV PACKAGE
(TOP VIEW)
A
1
B
2
GND
3
5
VCC
4
Y
1
An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications,
intellectual property matters and other important disclaimers. PRODUCTION DATA.
SN74LV1T08
SCLS739B – SEPTEMBER 2013 – REVISED FEBRUARY 2014
www.ti.com
Table of Contents
1
2
3
4
Features .................................................................
Applications ..........................................................
Description ............................................................
Revision History ...................................................
1
1
1
2
4.1
4.2
4.3
4.4
4.5
5
5
6
6
7
Typical Design Examples .........................................
Absolute Maximum Ratings .....................................
Recommended Operating Conditions ......................
Electrical Characteristics ..........................................
Switching Characteristics .........................................
4.6 Operating Characteristics ........................................ 7
5
Parameter Measurement Information ................. 8
6
Device and Documentation Support ................... 9
5.1 More Product Selection ............................................ 8
6.1 Trademarks .............................................................. 9
6.2 Electrostatic Discharge Caution ............................... 9
6.3 Glossary ................................................................... 9
7
Mechanical, Packaging, and Orderable
Information ............................................................ 9
4 Revision History
NOTE: Page numbers for previous revisions may differ from page numbers in the current version.
Changes from Original (September 2013) to Revision A
•
Updated VCC values for VIH parameter in the ELECTRICAL CHARACTERISTICS table. .................................................... 6
Changes from Revision A (September 2013) to Revision B
•
2
Page
Page
Updated document formatting. .............................................................................................................................................. 1
Submit Documentation Feedback
Copyright © 2013–2014, Texas Instruments Incorporated
Product Folder Links: SN74LV1T08
SN74LV1T08
www.ti.com
SCLS739B – SEPTEMBER 2013 – REVISED FEBRUARY 2014
Function Table
INPUT
(Lower Level Input)
OUTPUT
(VCC CMOS)
A
B
Y
H
H
H
L
X
L
X
L
L
SUPPLY VCC = 3.3V
A
B
VIH(min) =1.35 V
VIL(max) =0.08 V
A
B
Y
VOH(min) = 2.9 V
VOL(max)= 0.2 V
1
4
2
Y
Figure 1. Logic Diagram (NAND Gate)
Figure 2. Excellent Signal Integrity (1.8V to 3.3V at 3.3V VCC)
Submit Documentation Feedback
Copyright © 2013–2014, Texas Instruments Incorporated
Product Folder Links: SN74LV1T08
3
SN74LV1T08
SCLS739B – SEPTEMBER 2013 – REVISED FEBRUARY 2014
www.ti.com
Figure 3. Excellent Signal Integrity (3.3V to 3.3V at 3.3V VCC)
Figure 4. Excellent Signal Integrity (3.3V to 1.8V at 1.8V VCC)
4
Submit Documentation Feedback
Copyright © 2013–2014, Texas Instruments Incorporated
Product Folder Links: SN74LV1T08
SN74LV1T08
www.ti.com
SCLS739B – SEPTEMBER 2013 – REVISED FEBRUARY 2014
4.1 Typical Design Examples
VIH = 2.0V
VIL = 0.8V
5.0V
3.3V
System
VIH = 0.99V
VIL = 0.55V
Vcc = 5.0V
5.0V, 3.3V
2.5V, 1.8V
1.5V, 1.2V
System
5.0V
System
LV1Txx Logic
Vcc = 1.8V
1.8V
System
LV1Txx Logic
Vcc = 3.3V
5.0V, 3.3V
2.5V, 1.8V
System
LV1Txx Logic
3.3V
System
VOH min = 2.4V
VIH min = 1.36V
VOL max = 0.4V
VIL min = 0.8V
Figure 5. Switching Thresholds for 1.8-V to 3.3-V Translation
4.2 Absolute Maximum Ratings (1)
over operating free-air temperature range (unless otherwise noted)
MIN
MAX
VCC
Supply voltage range
–0.5
7.0
V
VI
Input voltage range (2)
–0.5
7.0
V
–0.5
4.6
V
–0.5
VCC + 0.5
VO
Voltage range applied to any output in the high-impedance or power-off state
(2)
Voltage range applied to any output in the high or low state (2)
UNIT
V
IIK
Input clamp current
VI < 0
–20
mA
IOK
Output clamp current
VO < 0 or VO > VCC
±20
mA
IO
Continuous output current
±25
mA
Continuous current through VCC or GND
±50
mA
θJA
Package thermal impedance (3)
Tstg
Storage temperature range
(1)
(2)
(3)
DBV package
206
DCK package
–65
252
°C/W
150
°C
Stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device. These are stress ratings
only, and functional operation of the device at these or any other conditions beyond those indicated under "recommended operating
conditions" is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
The input negative-voltage and output voltage ratings may be exceeded if the input and output current ratings are observed.
The package thermal impedance is calculated in accordance with JESD 51-7.
Submit Documentation Feedback
Copyright © 2013–2014, Texas Instruments Incorporated
Product Folder Links: SN74LV1T08
5
SN74LV1T08
SCLS739B – SEPTEMBER 2013 – REVISED FEBRUARY 2014
www.ti.com
4.3 Recommended Operating Conditions (1)
over operating free-air temperature range (unless otherwise noted)
MIN
MAX
UNIT
VCC
Supply voltage
1.6
5.5
V
VI
Input voltage
0
5.5
V
VO
Output voltage
0
VCC
V
IOH
High-level output current
IOL
Low-level output current
Δt/Δ
v
TA
(1)
Input transition rise or fall rate
VCC = 1.8 V
–3
VCC = 2.5 V
–5
VCC = 3.3 V
–7
VCC = 5.0 V
–8
VCC = 1.8 V
3
VCC = 2.5 V
5
VCC = 3.3 V
7
VCC = 5.0 V
8
VCC = 1.8 V
20
VCC = 3.3 V or 2.5 V
20
VCC = 5.0 V
20
Operating free-air temperature
–40
125
mA
mA
ns/V
°C
All unused inputs of the device must be held at VCC or GND to ensure proper device operation. Refer to the TI application report,
Implications of Slow or Floating CMOS Inputs, literature number SCBA004.
4.4 Electrical Characteristics
over recommended operating free-air temperature range (unless otherwise noted)
PARAMETER
TEST CONDITIONS
TA = 25°C
VCC
MIN
VIH
Low-level input
voltage
0.94
1.0
1.02
1.03
1.135
1.18
VCC = 2.75 V
1.21
1.23
VCC = 3 V to 3.3 V
1.35
1.37
VCC = 3.6 V
1.47
1.48
VCC = 4.5 V to 5.0 V
2.02
2.03
2.1
IOH = –2.3 mA
IOH = –3 mA
VOH
IOH = –3 mA
IOH = –3.0 mA
IOH = –5.5 mA
IOH = –5.5 mA
IOH = –4 mA
IOH = –8 mA
IOH = –8 mA
6
2.11
0.55
VCC = 2.25 V to 2.75 V
0.75
0.71
0.8
0.65
1.65 V to 5.5 V
0.8
VCC – 0.1
1.28
1.21
1.5
1.45
1.8V
2.3V
2.5V
3.0 V
3.3 V
4.5 V
5.0 V
Submit Documentation Feedback
V
0.8
VCC – 0.1
1.65 V
UNIT
V
0.58
VCC = 4.5 V to 5.5 V
IOH = –2.0 mA
MAX
VCC = 1.65 V to 2.0 V
VCC = 3 V to 3.6 V
IOH = –20 µA
MIN
VCC = 2.0 V
VCC = 5.5 V
VIL
TA = –40°C to 125°C
MAX
VCC = 1.65 V to 1.8 V
VCC = 2.25 V to 2.5 V
High-level input
voltage
TYP
2.0
2.0
2.0
1.93
2.25
2.15
2.78
2.7
2.6
2.49
2.9
2.8
4.2
4.1
4.1
3.95
4.6
4.5
V
V
V
V
V
V
Copyright © 2013–2014, Texas Instruments Incorporated
Product Folder Links: SN74LV1T08
SN74LV1T08
www.ti.com
SCLS739B – SEPTEMBER 2013 – REVISED FEBRUARY 2014
Electrical Characteristics (continued)
over recommended operating free-air temperature range (unless otherwise noted)
PARAMETER
TEST CONDITIONS
MIN
MAX
0.1
0.1
1.65 V
0.2
0.25
0.1
0.15
2.3V
IOL = 3 mA
3.0 V
IOL = 4 mA
4.5 V
IOL = 8 mA
VI = 0 V or VCC
0.15
0.2
0.1
0.15
0.2
0.252
0.15
0.2
0.3
0.35
0.12
±1
5.0 V
1
10
3.3 V
1
10
2.5 V
1
10
0V, 1.8V, 2.5V, 3.3V, 5.5 V
VI = 0 V or VCC,
IO = 0; open on loading
ICC
TA = –40°C to 125°C
MAX
1.65 V to 5.5 V
IOH = 3 mA
A input
TYP
IOL = 1.9 mA
IOL = 5.5 mA
II
MIN
IOL = 20 µA
IOH = 2.3 mA
VOL
TA = 25°C
VCC
UNIT
V
μA
μA
1.8V
1
10
One input at 0.3V or 3.4V,
Other inputs at 0 or VCC,
IO = 0
5.5 V
1.35
1.5
mA
One input at 0.3V or 1.1V
Other inputs at 0 or VCC,
IO = 0
1.8V
10
10
μA
Ci
VI = VCC or GND
3.3 V
2
10
pF
Co
VO = VCC or GND
3.3 V
2.5
ΔICC
10
2
2.5
pF
4.5 Switching Characteristics
over recommended operating free-air temperature range (unless otherwise noted) (see Figure 7)
PARAMETER
FROM
(INPUT)
TO
(OUTPUT)
FREQUENCY
(TYP)
VCC
5.0V
DC to 50 MHz
3.3V
tpd
Any In
Y
DC to 25 MHz
2.5V
DC to 15 MHz
1.8V
CL
TA = 25°C
MIN
TA = –65°C to 125°C
TYP MAX
MIN
TYP
MAX
15pF
4
5
4
5
30pF
5.5
7.0
5.5
7.0
15pF
4.8
5
5
5.5
30pF
5
5.5
5.5
6.5
15pF
6
6.5
7
7.5
30pF
6.5
7.5
7.5
8.5
15pF
10.5
11
11
12
30pF
12
13
12
14
UNIT
ns
ns
ns
ns
4.6 Operating Characteristics
TA = 25°C
PARAMETER
Cpd
Power dissipation capacitance
TEST CONDITIONS
f = 1 MHz and 10 MHz
VCC
TYP
1.8 V ± 0.15 V
10
2.5 V ± 0.2 V
10
3.3 V ± 0.3 V
10
5.5 V ± 0.5 V
10
Submit Documentation Feedback
Copyright © 2013–2014, Texas Instruments Incorporated
Product Folder Links: SN74LV1T08
UNIT
pF
7
SN74LV1T08
SCLS739B – SEPTEMBER 2013 – REVISED FEBRUARY 2014
www.ti.com
5 Parameter Measurement Information
From Output
Under Test
CL
(see Note A)
VCC = 2.5 V
± 0.2 V
VCC = 3.3 V
± 0.3 V
5, 10, 15, 30 pF
VI/2
VCC/2
5, 10, 15, 30 pF
VI/2
VCC/2
1 MΩ
CL
VMI
VMO
LOAD CIRCUIT
VI
VMI
Input
VMI
0V
tPHL
tPLH
VOH
VMO
Output
VMo
VOL
tPHL
tPLH
VOH
VMo
Output
VMo
VOL
VOLTAGE WAVEFORMS
PROPAGATION DELAY TIMES
INVERTING AND NONINVERTING OUTPUTS
NOTES: A.
B.
C.
D.
CL includes probe and jig capacitance.
All input pulses are supplied by generators having the following characteristics: PRR ≤ 10 MHz, ZO = 50 Ω, slew rate ≥ 1 V/ns.
The outputs are measured one at a time, with one transition per measurement.
tPLH and tPHL are the same as tpd.
Figure 6. Load Circuit and Voltage Waveforms
5.1 More Product Selection
DEVICE
PACKAGE
DESCRIPTION
SN74LV1T00
DCK, DBV
2-Input Positive-NAND Gate
SN74LV1T02
DCK, DBV
2-Input Positive-NOR Gate
SN74LV1T08
DCK, DBV
Inverter Gate
SN74LV1T08
DCK, DBV
2-Input Positive-AND Gate
SN74LV1T17
DCK, DBV
Single Buffer Gate with 3-state Output
SN74LV1T14
DCK, DBV
Single Schmitt-Trigger Inverter Gate
SN74LV1T32
DCK, DBV
2-Input Positive-OR Gate
SN74LV1T50
DCK, DBV
Single Buffer Gate with 3-state Output
SN74LV1T86
DCK, DBV
Single 2-Input Exclusive-Or Gate
SN74LV1T125
DCK, DBV
Single Buffer Gate with 3-state Output
SN74LV1T126
DCK, DBV
Single Buffer Gate with 3-state Output
SN74LV4T125
RGY, PW
Quadruple Bus Buffer Gate With 3-State Outputs
8
Submit Documentation Feedback
Copyright © 2013–2014, Texas Instruments Incorporated
Product Folder Links: SN74LV1T08
SN74LV1T08
www.ti.com
SCLS739B – SEPTEMBER 2013 – REVISED FEBRUARY 2014
6 Device and Documentation Support
6.1 Trademarks
All trademarks are the property of their respective owners.
6.2 Electrostatic Discharge Caution
These devices have limited built-in ESD protection. The leads should be shorted together or the device placed in conductive foam
during storage or handling to prevent electrostatic damage to the MOS gates.
6.3 Glossary
SLYZ022 — TI Glossary.
This glossary lists and explains terms, acronyms and definitions.
7 Mechanical, Packaging, and Orderable Information
The following packaging information and addendum reflect the most current data available for the designated
devices. This data is subject to change without notice and revision of this document.
Submit Documentation Feedback
Copyright © 2013–2014, Texas Instruments Incorporated
Product Folder Links: SN74LV1T08
9
PACKAGE OPTION ADDENDUM
www.ti.com
4-Apr-2019
PACKAGING INFORMATION
Orderable Device
Status
(1)
Package Type Package Pins Package
Drawing
Qty
Eco Plan
Lead/Ball Finish
MSL Peak Temp
(2)
(6)
(3)
Op Temp (°C)
Device Marking
(4/5)
SN74LV1T08DBVR
ACTIVE
SOT-23
DBV
5
3000
Green (RoHS
& no Sb/Br)
CU NIPDAU | CU SN
Level-1-260C-UNLIM
-40 to 125
(NEE3, NEEJ, NEES)
SN74LV1T08DBVRG4
ACTIVE
SOT-23
DBV
5
3000
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
-40 to 125
NEE3
SN74LV1T08DCKR
ACTIVE
SC70
DCK
5
3000
Green (RoHS
& no Sb/Br)
CU NIPDAU | CU SN
Level-1-260C-UNLIM
-40 to 125
(WE3, WEJ, WES)
SN74LV1T08DCKRG4
ACTIVE
SC70
DCK
5
3000
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
WE3
(1)
The marketing status values are defined as follows:
ACTIVE: Product device recommended for new designs.
LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect.
NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design.
PREVIEW: Device has been announced but is not in production. Samples may or may not be available.
OBSOLETE: TI has discontinued the production of the device.
(2)
RoHS: TI defines "RoHS" to mean semiconductor products that are compliant with the current EU RoHS requirements for all 10 RoHS substances, including the requirement that RoHS substance
do not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, "RoHS" products are suitable for use in specified lead-free processes. TI may
reference these types of products as "Pb-Free".
RoHS Exempt: TI defines "RoHS Exempt" to mean products that contain lead but are compliant with EU RoHS pursuant to a specific EU RoHS exemption.
Green: TI defines "Green" to mean the content of Chlorine (Cl) and Bromine (Br) based flame retardants meet JS709B low halogen requirements of <=1000ppm threshold. Antimony trioxide based
flame retardants must also meet the <=1000ppm threshold requirement.
(3)
MSL, Peak Temp. - The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature.
(4)
There may be additional marking, which relates to the logo, the lot trace code information, or the environmental category on the device.
(5)
Multiple Device Markings will be inside parentheses. Only one Device Marking contained in parentheses and separated by a "~" will appear on a device. If a line is indented then it is a continuation
of the previous line and the two combined represent the entire Device Marking for that device.
(6)
Lead/Ball Finish - Orderable Devices may have multiple material finish options. Finish options are separated by a vertical ruled line. Lead/Ball Finish values may wrap to two lines if the finish
value exceeds the maximum column width.
Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information
provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and
Addendum-Page 1
Samples
PACKAGE OPTION ADDENDUM
www.ti.com
4-Apr-2019
continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals.
TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release.
In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis.
Addendum-Page 2
PACKAGE MATERIALS INFORMATION
www.ti.com
14-Oct-2018
TAPE AND REEL INFORMATION
*All dimensions are nominal
Device
Package Package Pins
Type Drawing
SPQ
Reel
Reel
A0
Diameter Width (mm)
(mm) W1 (mm)
B0
(mm)
K0
(mm)
P1
(mm)
SN74LV1T08DBVR
SOT-23
DBV
5
3000
178.0
9.0
SN74LV1T08DBVR
SOT-23
DBV
5
3000
180.0
SN74LV1T08DBVR
SOT-23
DBV
5
3000
178.0
SN74LV1T08DBVRG4
SOT-23
DBV
5
3000
SN74LV1T08DCKR
SC70
DCK
5
SN74LV1T08DCKR
SC70
DCK
SN74LV1T08DCKR
SC70
DCK
SN74LV1T08DCKRG4
SC70
DCK
3.3
3.2
1.4
4.0
8.0
Q3
8.4
3.23
3.17
1.37
4.0
8.0
Q3
9.2
3.3
3.23
1.55
4.0
8.0
Q3
178.0
9.2
3.3
3.23
1.55
4.0
8.0
Q3
3000
178.0
9.2
2.4
2.4
1.22
4.0
8.0
Q3
5
3000
178.0
9.0
2.4
2.5
1.2
4.0
8.0
Q3
5
3000
180.0
8.4
2.47
2.3
1.25
4.0
8.0
Q3
5
3000
178.0
9.2
2.4
2.4
1.22
4.0
8.0
Q3
Pack Materials-Page 1
W
Pin1
(mm) Quadrant
PACKAGE MATERIALS INFORMATION
www.ti.com
14-Oct-2018
*All dimensions are nominal
Device
Package Type
Package Drawing
Pins
SPQ
Length (mm)
Width (mm)
Height (mm)
SN74LV1T08DBVR
SOT-23
DBV
5
3000
180.0
180.0
18.0
SN74LV1T08DBVR
SOT-23
DBV
5
3000
202.0
201.0
28.0
SN74LV1T08DBVR
SOT-23
DBV
5
3000
180.0
180.0
18.0
SN74LV1T08DBVRG4
SOT-23
DBV
5
3000
180.0
180.0
18.0
SN74LV1T08DCKR
SC70
DCK
5
3000
180.0
180.0
18.0
SN74LV1T08DCKR
SC70
DCK
5
3000
180.0
180.0
18.0
SN74LV1T08DCKR
SC70
DCK
5
3000
202.0
201.0
28.0
SN74LV1T08DCKRG4
SC70
DCK
5
3000
180.0
180.0
18.0
Pack Materials-Page 2
PACKAGE OUTLINE
DBV0005A
SOT-23 - 1.45 mm max height
SCALE 4.000
SMALL OUTLINE TRANSISTOR
C
3.0
2.6
1.75
1.45
PIN 1
INDEX AREA
1
0.1 C
B
A
5
2X 0.95
1.9
1.45
0.90
3.05
2.75
1.9
2
4
0.5
5X
0.3
0.2
3
(1.1)
C A B
0.15
TYP
0.00
0.25
GAGE PLANE
8
TYP
0
0.22
TYP
0.08
0.6
TYP
0.3
SEATING PLANE
4214839/E 09/2019
NOTES:
1. All linear dimensions are in millimeters. Any dimensions in parenthesis are for reference only. Dimensioning and tolerancing
per ASME Y14.5M.
2. This drawing is subject to change without notice.
3. Refernce JEDEC MO-178.
4. Body dimensions do not include mold flash, protrusions, or gate burrs. Mold flash, protrusions, or gate burrs shall not
exceed 0.15 mm per side.
www.ti.com
EXAMPLE BOARD LAYOUT
DBV0005A
SOT-23 - 1.45 mm max height
SMALL OUTLINE TRANSISTOR
PKG
5X (1.1)
1
5
5X (0.6)
SYMM
(1.9)
2
2X (0.95)
3
4
(R0.05) TYP
(2.6)
LAND PATTERN EXAMPLE
EXPOSED METAL SHOWN
SCALE:15X
SOLDER MASK
OPENING
METAL
SOLDER MASK
OPENING
METAL UNDER
SOLDER MASK
EXPOSED METAL
EXPOSED METAL
0.07 MIN
ARROUND
0.07 MAX
ARROUND
NON SOLDER MASK
DEFINED
(PREFERRED)
SOLDER MASK
DEFINED
SOLDER MASK DETAILS
4214839/E 09/2019
NOTES: (continued)
5. Publication IPC-7351 may have alternate designs.
6. Solder mask tolerances between and around signal pads can vary based on board fabrication site.
www.ti.com
EXAMPLE STENCIL DESIGN
DBV0005A
SOT-23 - 1.45 mm max height
SMALL OUTLINE TRANSISTOR
PKG
5X (1.1)
1
5
5X (0.6)
SYMM
(1.9)
2
2X(0.95)
4
3
(R0.05) TYP
(2.6)
SOLDER PASTE EXAMPLE
BASED ON 0.125 mm THICK STENCIL
SCALE:15X
4214839/E 09/2019
NOTES: (continued)
7. Laser cutting apertures with trapezoidal walls and rounded corners may offer better paste release. IPC-7525 may have alternate
design recommendations.
8. Board assembly site may have different recommendations for stencil design.
www.ti.com
IMPORTANT NOTICE AND DISCLAIMER
TI PROVIDES TECHNICAL AND RELIABILITY DATA (INCLUDING DATASHEETS), DESIGN RESOURCES (INCLUDING REFERENCE
DESIGNS), APPLICATION OR OTHER DESIGN ADVICE, WEB TOOLS, SAFETY INFORMATION, AND OTHER RESOURCES “AS IS”
AND WITH ALL FAULTS, AND DISCLAIMS ALL WARRANTIES, EXPRESS AND IMPLIED, INCLUDING WITHOUT LIMITATION ANY
IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NON-INFRINGEMENT OF THIRD
PARTY INTELLECTUAL PROPERTY RIGHTS.
These resources are intended for skilled developers designing with TI products. You are solely responsible for (1) selecting the appropriate
TI products for your application, (2) designing, validating and testing your application, and (3) ensuring your application meets applicable
standards, and any other safety, security, or other requirements. These resources are subject to change without notice. TI grants you
permission to use these resources only for development of an application that uses the TI products described in the resource. Other
reproduction and display of these resources is prohibited. No license is granted to any other TI intellectual property right or to any third
party intellectual property right. TI disclaims responsibility for, and you will fully indemnify TI and its representatives against, any claims,
damages, costs, losses, and liabilities arising out of your use of these resources.
TI’s products are provided subject to TI’s Terms of Sale (www.ti.com/legal/termsofsale.html) or other applicable terms available either on
ti.com or provided in conjunction with such TI products. TI’s provision of these resources does not expand or otherwise alter TI’s applicable
warranties or warranty disclaimers for TI products.
Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265
Copyright © 2019, Texas Instruments Incorporated
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Related manuals

Download PDF

advertising