Texas Instruments | bqTESLA Transmitter Coil Vendors (Rev. G) | Application notes | Texas Instruments bqTESLA Transmitter Coil Vendors (Rev. G) Application notes

Texas Instruments bqTESLA Transmitter Coil Vendors (Rev. G) Application notes
Application Report
SLUA649G – August 2012 – Revised July 2016
bqTESLA Transmitter Coil Vendors
Dick Stacey and Bill Johns ................................................................ Wireless Power Transmitter Products
bqTESLA Transmitter Coil Vendors’ Information
This application note documents the list of transmitter coils tested with TI EVMs. Table 1 shows the TI
bqTESLA devices and the corresponding coils. Table 2 shows the contact information for the coil vendors.
This is a running document. More coils will be tested and added. Please always download the latest
version from the TI website.
Table 1. bqTESLA Transmitter Devices and Corresponding Coils
TI Device Part Number
TX Type Coil
bq500212A
bq50002/bq500511
WPC v1.1 / v1.2
Coil Part Number
Vendor
ETW-00032W
Elytone
Y31-60055F
E&E
TXL05002A
Mingstar
A11
3-coil A6
bq500412
bq500414Q
WPC v1.1 / v1.2
IC505004N-11
Mingstar
760-308-111
Wurth Elektronik
ETW-00033
Elytone
Y31-60037F
E&E
312-00024
Mingstar
IC1005604N
Mingstar
WT-1005690-12K2-A6-G
TDK
760-308-106
Wurth Elektronik
ETW-00033A1
Elytone
Single-coil A6
ETW-00033A2
Elytone
IC565003N
Mingstar
760-308-113
Wurth Elektronik
bq500215
WPC v1.1 / v 1.2
A29
760-308-141
Wurth Elektronik
bq501210
WPC v1.2
MP-A5
Medium Power
760-308-141
Wurth Elektronik
Table 2. Contact Information for Coil Vendors
Vendor
Contact Information
E&E
Simon Chung, simonchung@eleceltek.com
Elytone
Annie Jya, annie@elytone.com.tw
Mingstar
Alen Liaw, alenliaw@mingstar.com.tw
TDK
Mike O’Toole, mike.o‘toole@us.tdk.com
Wurth Elektronik
Wireless Group wirelesspower@we-online.com
SLUA649G – August 2012 – Revised July 2016
Submit Documentation Feedback
Copyright © 2012–2016, Texas Instruments Incorporated
bqTESLA Transmitter Coil Vendors
1
www.ti.com
Table 3. Revision History
2
Version #
Date
Author
Change Description
1.0
1-August-12
Pearl Cao / Bill Johns
Original Document
1.1
16-August-12
Pearl Cao / Bill Johns
Table 1: bq500210 A10
Added Elytone, E & E and Mingstar
Table 1: bq500410 A6
Removed Wurth pending evaluation, and added Mingstar
1.2
6-September-12
Pearl Cao / Bill Johns
1) Corrected Coil P/N for bq500210-A1 Vendor Wurth From: 760 380-101 To: 760-308-101
2) Added to bq500211-A11
1.3
25-October-12
Pearl Cao / Bill Johns
Added:
bq500210-A1 – IC505004N - Mingstar
bq500211-A5 – 760-308-105 - Wurth Elektronik
bq500211-A11 – IC505004N-11 - Mingstar
1.4
18-April-13
Pearl Cao / Bill Johns
Added:
bq500211-A5 – ETW-00032 – Elytone
bq500211-A5 – IC505004N-05 – Mingstar
bq500211-A11 – ETW-00032 – Elytone
Changed - bq500410 –- 3 coil A6 and Vendors
Added - bq500410 –- Single coil A6
1.5
11-December-13
Pearl Cao / Bill Johns
Added:
bq500211A – A5 and A11
bq500212 – A5 and A11
bq500412 – 3 Coil A6 and Single coil A6
TKD – Mike O’Toole - Coil Vendor’s Contact Inforamtion
Changed:
bq500410 to bq500410A – 3 Coil A6 and Single coil A6
1.6
07-July-16
Bill Johns / Dick Stacey
Removed:
A1 and A5 coil references (no new products can be certified).
Removed NRND devices:
bq500211, bq500211A, bq500210, bq500410A
Added:
bq50002/bq500511 for A11
bq500215 for A29
bq501210 for MP-A5
bqTESLA Transmitter Coil Vendors
SLUA649G – August 2012 – Revised July 2016
Submit Documentation Feedback
Copyright © 2012–2016, Texas Instruments Incorporated
IMPORTANT NOTICE
Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, enhancements, improvements and other
changes to its semiconductor products and services per JESD46, latest issue, and to discontinue any product or service per JESD48, latest
issue. Buyers should obtain the latest relevant information before placing orders and should verify that such information is current and
complete. All semiconductor products (also referred to herein as “components”) are sold subject to TI’s terms and conditions of sale
supplied at the time of order acknowledgment.
TI warrants performance of its components to the specifications applicable at the time of sale, in accordance with the warranty in TI’s terms
and conditions of sale of semiconductor products. Testing and other quality control techniques are used to the extent TI deems necessary
to support this warranty. Except where mandated by applicable law, testing of all parameters of each component is not necessarily
performed.
TI assumes no liability for applications assistance or the design of Buyers’ products. Buyers are responsible for their products and
applications using TI components. To minimize the risks associated with Buyers’ products and applications, Buyers should provide
adequate design and operating safeguards.
TI does not warrant or represent that any license, either express or implied, is granted under any patent right, copyright, mask work right, or
other intellectual property right relating to any combination, machine, or process in which TI components or services are used. Information
published by TI regarding third-party products or services does not constitute a license to use such products or services or a warranty or
endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the
third party, or a license from TI under the patents or other intellectual property of TI.
Reproduction of significant portions of TI information in TI data books or data sheets is permissible only if reproduction is without alteration
and is accompanied by all associated warranties, conditions, limitations, and notices. TI is not responsible or liable for such altered
documentation. Information of third parties may be subject to additional restrictions.
Resale of TI components or services with statements different from or beyond the parameters stated by TI for that component or service
voids all express and any implied warranties for the associated TI component or service and is an unfair and deceptive business practice.
TI is not responsible or liable for any such statements.
Buyer acknowledges and agrees that it is solely responsible for compliance with all legal, regulatory and safety-related requirements
concerning its products, and any use of TI components in its applications, notwithstanding any applications-related information or support
that may be provided by TI. Buyer represents and agrees that it has all the necessary expertise to create and implement safeguards which
anticipate dangerous consequences of failures, monitor failures and their consequences, lessen the likelihood of failures that might cause
harm and take appropriate remedial actions. Buyer will fully indemnify TI and its representatives against any damages arising out of the use
of any TI components in safety-critical applications.
In some cases, TI components may be promoted specifically to facilitate safety-related applications. With such components, TI’s goal is to
help enable customers to design and create their own end-product solutions that meet applicable functional safety standards and
requirements. Nonetheless, such components are subject to these terms.
No TI components are authorized for use in FDA Class III (or similar life-critical medical equipment) unless authorized officers of the parties
have executed a special agreement specifically governing such use.
Only those TI components which TI has specifically designated as military grade or “enhanced plastic” are designed and intended for use in
military/aerospace applications or environments. Buyer acknowledges and agrees that any military or aerospace use of TI components
which have not been so designated is solely at the Buyer's risk, and that Buyer is solely responsible for compliance with all legal and
regulatory requirements in connection with such use.
TI has specifically designated certain components as meeting ISO/TS16949 requirements, mainly for automotive use. In any case of use of
non-designated products, TI will not be responsible for any failure to meet ISO/TS16949.
Products
Applications
Audio
www.ti.com/audio
Automotive and Transportation
www.ti.com/automotive
Amplifiers
amplifier.ti.com
Communications and Telecom
www.ti.com/communications
Data Converters
dataconverter.ti.com
Computers and Peripherals
www.ti.com/computers
DLP® Products
www.dlp.com
Consumer Electronics
www.ti.com/consumer-apps
DSP
dsp.ti.com
Energy and Lighting
www.ti.com/energy
Clocks and Timers
www.ti.com/clocks
Industrial
www.ti.com/industrial
Interface
interface.ti.com
Medical
www.ti.com/medical
Logic
logic.ti.com
Security
www.ti.com/security
Power Mgmt
power.ti.com
Space, Avionics and Defense
www.ti.com/space-avionics-defense
Microcontrollers
microcontroller.ti.com
Video and Imaging
www.ti.com/video
RFID
www.ti-rfid.com
OMAP Applications Processors
www.ti.com/omap
TI E2E Community
e2e.ti.com
Wireless Connectivity
www.ti.com/wirelessconnectivity
Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265
Copyright © 2016, Texas Instruments Incorporated
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising