Bryston | BDP WiFi Adapter-draft 1 | Owner Manual | Bryston BDP WiFi Adapter-draft 1 Owner Manual

Bryston BDP WiFi Adapter-draft 1 Owner Manual
BDP WiFi Adapter
Owner’s Manual
Thank you for purchasing a Bryston BDP Wifi Adapter.
This adapter is compatible with all hardware versions
of the BDP when they are running firmware version
S2.36 or greater.
The adapter is compatible with most wifi networks
based on the 802.11n standard. Naturally, performance
and speed are largely dependent on distance from
the wifi access point and interference from physical
obstructions and competing wifi traffic from other
nearby devices and networks. The theoretical
maximum throughput is 130mbps which is far beyond
what is needed to stream high resolution audio from
an NAS or TIDAL.
The adapter kit includes a short USB extension cable
which allows some flexibility in placing the wifi
adapter in order to obtain the best wifi reception. If
you experience audio dropouts or difficulty controlling
the BDP from your network connected device,
experiment with using the extension cable and placing
the adapter away from your audio equipment to try
and get better signal.
To install the wifi adapter, simply remove the white
protective cap, and insert the adapter into any free
USB port on your BDP. Disconnect any other network
cable. Reboot the BDP and follow the instructions on
the reverse side of this page.
Questions or requests for help can be directed to our
service department at or by phone
BDP WiFi Adapter
Owner’s Manual
1) Connect your Bryston Wifi Dongle to any free
USB port on your BDP. Reboot the BDP. The
BDP will create it’s own wireless network called
Bryston Digital Player. Connect to that network
with the password bryston1 . Once connected,
a web browser will automatically open with the
Dashboard of your BDP.
2) Click or tap on “Network Interfaces” in the settings
area. Then select “Wireless (wlan0)”. Using the
Visible Networks menu, select your desired
network, or if your network has a hidden name,
enter the BSSID.
3) Choose the security type associated with the
network, and enter your password. Click or tap
the Apply button. Your BDP will save the settings
and join the new network. Depending on which
model BDP you have, this will take between 30
and 120 seconds.
4) If your device (computer, tablet, mobile) does not
automatically rejoin the network you configured
the BDP to connect to, instruct it to do so. Then,
from a web browser, navigate to Click your BDP, and use
as normal.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF