EdgeStar | AP14001HS | manual | EdgeStar AP14001HS Large Room 115V Portable Dual Hose Air Conditioner with Heater, Window Mounting Kit and Remote Manual

EdgeStar AP14001HS Large Room 115V Portable Dual Hose Air Conditioner with Heater, Window Mounting Kit and Remote Manual
Portable Air Conditioner
AP14001HS
Owner’s Manual
For more information on other great EdgeStar products on the web, go to https://www.edgestar.com
To use the EdgeStar self-diagnostic tool, go to https://support.edgestar.com
V2.4-12012017
Important Safety Information
Improper handling can cause serious damage to the appliance and / or to the user.
This portable air conditioner is not intended for use by children. Children should be supervised to
ensure that they do not play with this product.
Improper handling
Electrical
Safety can cause serious damage to the appliance and/or to the user. Please read
the following safety information.
This unit is designed for indoor use only.
Do not use the unit in extremely humid or wet environments.
Do not spray water and wet the housing or control panel.
Do not pull the unit by the cord.
Always turn the unit off and unplug it from the socket when cleaning.
Unplug the unit if it is not going to be used for a long period of time.
Do not operate the unit with a damaged plug or loose socket.
Use only the correct power supply with appropriate amperage.
If the power cord is damaged, it must be replaced by the manufacturer, a service agent, or a qualified
technician.
Do not remove any part of the casing unless instructed to do so by an authorized technician.










General Safety




This portable air conditioner is not intended to be used by children.
Do not allow children to play with the controls or drop any objects into the air outlets or vents.
Do not place objects or let any person sit on top of the unit.
Only use the unit in the upright position on a flat, level surface and provide at least 20 inches of
clearance from any walls or objects.
Route the power cord carefully to avoid a tripping hazard.
This unit is intended for domestic use only. Do not use the portable air conditioner for industrial or
commercial use. Any other use may invalidate the warranty.


i
Operation of Safety Plug
Note: Electrical products should not be disposed of with household waste. Please contact
your local recycling center for more information about how to recycle electronic waste.
Your portable air conditioner is supplied with a Leakage-Current Detection and Interruption
(LCDI) safety plug. This device provides protection to reduce the risk of fire due to arcing faults in
the power supply cord. Before using your portable air conditioner, follow the instructions below to
ensure that the LCDI plug is working properly:
1. Plug the power cord into a grounded outlet.
2. Press the TEST button on the LCDI plug. This should trip the plug and cut the power to the air
conditioner. If the plug does not trip and you are able to turn on the unit, please contact
EdgeStar support.
DO NOT USE YOUR PORTABLE AIR CONDITIONER IF THE TEST FAILS.
Press the RESET button to start using your air conditioner.
DO NOT use the TEST and RESET buttons as an ON / OFF switch.
ii
Table of Contents
IMPORTANT SAFETY INFORMATION .......................................................................................................................... I
OPERATION OF SAFETY PLUG .................................................................................................................................. II
TABLE OF CONTENTS ................................................................................................................................................ III
INTRODUCTION............................................................................................................................................................. 1
PARTS IDENTIFICATION .............................................................................................................................................. 2
Front View .................................................................................................................................................................... 2
Back View .................................................................................................................................................................... 2
INSTALLING THE CARBON FILTER ............................................................................................................................ 3
WINDOW KIT INSTALLATION INSTRUCTIONS .......................................................................................................... 4
Installing the Grated Adapter ....................................................................................................................................... 5
Installing the Window Plates ........................................................................................................................................ 6
Attaching the Duct Connectors to the Exhaust Hose .................................................................................................. 7
Connecting the Duct Connector to the Unit ................................................................................................................. 8
Connecting the Duct Connector to the Grated Adapter ............................................................................................... 8
NOTES ABOUT THE EXHAUST HOSE ........................................................................................................................ 9
CONTROL PANEL ....................................................................................................................................................... 10
Power Control ............................................................................................................................................................ 10
Warning Light ............................................................................................................................................................. 10
Mode Control ............................................................................................................................................................. 10
Fan Speed Control ..................................................................................................................................................... 11
Timer .......................................................................................................................................................................... 11
Timer / Temp Set Control Wheel ............................................................................................................................... 11
REMOTE CONTROL OVERVIEW ............................................................................................................................... 12
Installing the Batteries ............................................................................................................................................... 13
ENERGY SAVING GUIDE ............................................................................................................................................ 13
MAINTENANCE............................................................................................................................................................ 14
Cleaning the Unit ....................................................................................................................................................... 14
Cleaning the Pre-filter ................................................................................................................................................ 14
Preparation for Storage ............................................................................................................................................. 14
TROUBLESHOOTING.................................................................................................................................................. 15
SPECIFICATIONS ........................................................................................................................................................ 17
NEW PORTABLE AIR CONDITIONER BTU’S ........................................................................................................... 18
What is SACC? .......................................................................................................................................................... 18
EDGESTAR LIMITED WARRANTY............................................................................................................................. 19
iii
Introduction
Thank you for purchasing this EdgeStar portable air conditioner. We hope that this purchase will
be the beginning of a lasting and rewarding relationship between you and EdgeStar. We will
provide the customer support and exemplary products necessary to nurture that relationship.
This manual contains important information regarding the proper installation, use, and
maintenance of your portable air conditioner. Following this manual will ensure that your product
will work at its peak performance, efficiency, and safety.
Please save the original product packaging in case you need to safely transport your portable air
conditioner.
For Your Records:
Please write down the model number and serial number below for future reference.
Both numbers are located on the ratings label on the back of your unit and are
needed to obtain warranty service. You may also want to staple your receipt to this
manual as it is the proof of your purchase, and is also needed for service under your
warranty.
Model Number:
Serial Number:
Date of Purchase:
For a more efficient experience, please do the following before contacting customer service:
1

If you received a damaged product, immediately contact the dealer that sold you the
product.

Read and follow this instruction manual carefully to help you install, use, and maintain your
portable air conditioner.

Read the troubleshooting section of this manual as it will help you diagnose and solve
common issues.

Visit us on the web at https://www.edgestar.com for product guides, additional
troubleshooting resources, and up-to-date information. You can also find an interactive
self-diagnostic tool at https://support.edgestar.com. If you need service, our friendly
customer service representatives are available via email at service@edgestar.com or by
telephone at 1 (866) 319-5473.
Parts Identification
Front View
Back View
2
Installing the Carbon Filter
Your portable air conditioner ships with a pre-filter and an activated carbon filter. The carbon filter
will help remove contaminates and odors from the air. It is recommended that you replace the
carbon filter every three to six months, or as needed. It is necessary to clean the pre-filter
periodically. Follow the steps below to install the carbon filter.
1. Open the pre-filter panel on the back of the unit.
Caution: Never operate the air conditioner without the pre-filter attached.
2. Insert the activated carbon filter between the pre-filter and the unit.
3. Reinstall the pre-filter.
Note: The size of the carbon filter may vary as shown below.
3
Window Kit Installation Instructions
Window Kit Parts list:
1. Adjust the plastic slider kit to the width or height of your window and tighten the two (2)
screws that are attached to the panel.
2. Push the round window adapter through the rear of the plastic slider. Line up the holes and
tighten the adapter with four (4) of the included screws. Tighten the screws from the front.
3. Install the plastic window slider kit into the window. If necessary, use duct tape to secure the
panel more tightly.
4. Connect the exhaust hose to the unit by inserting the exhaust hose connector attached to the
hose into the exhaust port in the unit.
5. Move the window close to the unit. Extend the hose and attach the other end of the hose to
the window. Align the tabs on the exhaust hose connector and the window panel adapter and
fasten them together.
4
Note: This unit can be used with one or two vent hoses. The exhaust hose should always be
used in cooling and heating (HS model) mode. The air intake hose can be used to increase the
cooling efficiency of the unit. If the air intake hose is not used, simply cover one of the grated
adapters on the window kit with a vent cap.
Installing the Grated Adapter
1. Insert the round grated adapter through the back grooved side of the window kit plate and into
the hole.
5
2. Secure the grated adapter by fastening the screws from the flat side of the window kit plate to
the holes on the grated adapter.
Installing the Window Plates
3. Open your window and place the window kit on the window sill with the grooved side facing
outward. Then slide the window kit plate out to fit the width of the window. You can use
screws to secure the window kit plate and keep it from sliding.
6
4. Lower the window to secure the window kit in place. You may need to use duct tape to better
secure the window kit.
Caution: Secure your window with window locks. Please contact your EdgeStar retailer to
purchase window locks.
Attaching the Duct Connectors to the Exhaust Hose
5. Attach the connectors to the hose:
a. Extend the ends of the exhaust hose.
b. Thread the duct connector onto the exhaust hose by turning it clockwise until it stops.
7
6. Roll the unit towards the window kit. Leave at least 20 inches between the unit and the wall.
Connecting the Duct Connector to the Unit
7. Align the slots on the duct connector to the tabs on the unit and snap the duct connector into
the back of the unit.
Connecting the Duct Connector to the Grated Adapter
8. Align the slots on the duct connector to the tabs on the grated adapter and snap the duct
connector into place.
8
After you have installed the exhaust hose and the window kit, you can plug in your portable air
conditioner and start using it.
Notes About the Exhaust Hose
Your portable air conditioner is designed to exhaust condensate water that is collected from the
air. This water, in either gaseous or droplet form, will be expelled out of the exhaust port of the
unit. Please take this into account when deciding how to vent the air conditioner.
1. The exhaust hose supplied with the portable air conditioner can be extended up to 48 inches;
however for maximum efficiency, use the shortest length possible.
2. Try to prevent any kinks or bends in the exhaust hose. Kinks or bends may trap exhaust air
which can radiate heat into the room or potentially cause the portable air conditioner to
overheat and shut itself off.
3. The exhaust hose supplied with the portable air conditioner has been specifically designed for
this air conditioner. Do not lengthen the hose by adding additional hoses or attachments or
replace it with any other hose.
Warning: Longer hoses are not recommended.
9
Control Panel
: Set Temperature Display
: Timer with Auto On/Off Switch Display
: Sleep Pattern Display
Power Control
The power button turns the unit on or off.
Warning Light
Condensed water may accumulate in the unit. The Warning light will turn on to indicate that the
internal tank is full. The unit will not continue operation until the tank has been drained.
Mode Control
Press the mode button to cycle between four different modes: Cool, Dehumidify, Fan, and Heating.
An indicator light will show which mode is currently in use.
Cooling Mode
During cooling mode the air is cooled and hot air is exhausted to the outside through the
exhaust hose. You can adjust the fan speed and air temperature for maximum comfort.
Note: The air exchange hoses must vent outside the room when using cool mode.
10
Dehumidify Mode
In dehumidify mode, air is dehumidified as it passes through the unit, while some cooling
continues to occur. If the room temperature is higher than 77°F, the fan speed can be
adjusted. Otherwise the fan speed will be maintained at “Low.”
Note: The warm air exchange hoses must vent inside the room when using Dehumidify Mode,
not outside as they do when cooling. If the unit is vented outside some cooling will occur.
Fan Mode
Air is circulated throughout the room as cooling continues to occur.
Note: The unit does not need to be vented while it is running in fan mode.
Heating Mode
Heating is activated only when the ambient temperature is below 77°F. In this mode, the
desired temperature can be set between 61°F and 77°F.
Note: When the appliance is in heating mode, both air hoses must be connected to the unit and
used to vent air to the outside.
Fan Speed Control
The Fan Speed Control has 3 settings: High, Medium, and Low.
Timer
Auto Turn Off
While the unit is running, press the timer button to select the number of hours you would like
the unit to continue to run in air conditioning mode until it automatically shuts off.
Auto Turn On
While the machine is in standby mode, press the timer button to select the number of hours you
would like the unit to remain in standby mode until it automatically starts running in air
conditioning mode.
Timer / Temp Set Control Wheel
This wheel is used for adjusting the timer settings and the set temperature. The default display on
the screen next to this wheel is the current room temperature.
11
Remote Control Overview
Note: Batteries are not included.
The remote control has the same functions as the touch control panel. All key functions can be
accessed from the remote control or from the control panel on the unit.
Button
Power
Speed
Timer
Function
This button powers the unit on and off.
This button allows you to choose between High, Medium, and Low fan speed.
This button allows you to set the unit to automatically turn on or off at a
Mode
specific time. You can use the “
” and “
” buttons to set the timer in one
hour increments.
Press this button to cycle through the operating modes in the following order:
Cool, Dehumidify, Fan, and Heating.
Use these buttons to adjust the temperature and timer settings. The default
display on the control panel will be the current room temperature. When you
Up /
Down
press the “
” or “
” button while the unit is in cool mode, the set
temperature will display and can be adjusted. After 15 seconds of inactivity
the display will revert back to the current room temperature. You can also use
the “
12
” and “
” buttons to set the timer from 1 – 24 hours.
Installing the Batteries
1. Remove the cover on the back of the remote control.
2. Insert the batteries with the (+) and (-) ends pointing in the correct directions, as indicated in
the image above.
3. Slide the cover back on to the remote.
Caution: Use only AAA or IEC R03 1.5V batteries. Remove the batteries if the remote control will
not be used for one month or longer. Do not attempt to recharge batteries that are not designed
to be recharged. All batteries should be replaced at the same time. Do not mix old and new
batteries. Do not dispose of batteries in a fire as they may explode.
Energy Saving Guide
Read and follow the guide below to get the best performance and efficiency from your portable
air conditioner:
 Do not cover the air outlet (exhaust) while the unit is in use.
 Do not place the unit in front of curtains or drapes as they may obstruct the air intake.
 Minimize the length of the exhaust hose, but allow at least 20” of clearance around the sides
and back of the unit.
 Make sure the exhaust hose is as straight as possible and avoid kinks or bends.
 Keep curtains, blinds, or drapes closed during the sunniest part of the day.
 Use the timer to operate the unit before it is needed. For example, set the timer to turn the
unit on in cooling mode for 3 or more hours to cool the room before you arrive. You may want
to operate the unit all day if you live in a warmer climate.
 Minimize the heat sources (direct sunlight, computers, servers, people, etc.) in the room.
 Close all windows and doors.
 Use the unit in a contained room. For example, operate the air conditioner in a room with four
walls and a ceiling, instead of a partitioned studio, or warehouse.
 Make sure the unit is on a level surface.
 Minimize the amount of humidity in the room. For example, run the unit as a dehumidifier.
 To prolong the compressor's life, please wait at least 3 minutes before turning the unit back
on after shutting it off.
 Inspect and clean the pre-filters regularly.
 Inspect and replace the activated carbon filters regularly.
 Perform routine maintenance.
13
Maintenance
Clean the air conditioner and filters regularly to maximize performance and efficiency, and to
prolong the unit’s life. Always be sure to unplug the air conditioner from the power outlet before
cleaning.
Cleaning the Unit
Use a soft dry cloth to wipe the body of the air conditioner clean. If necessary, use lukewarm
water to dampen a cloth to clean the unit.
Use a soft bristle brush to clean between the vents.
Carefully use a vacuum cleaner to clean the condenser coils.
Never use abrasive chemicals, volatile substances, gasoline, detergents, chemically treated
cloths, or other cleaning solvents that may damage the cabinet exterior.
Never spray water directly on the unit.
Cleaning the Pre-filter
To clean the pre-filter, follow the steps below:
1. Power off the unit and remove the pre-filter.
2. Remove the activated carbon filter.
3. Use a vacuum cleaner or tap the filter lightly to remove loose dust and dirt, then rinse it
thoroughly under lukewarm running water (below 104° F). You may use a mild soap and
water solution if needed. Allow the filter to air dry in a cool and shaded place. Dry it thoroughly
before reinstalling it.
Clean the pre-filter periodically. If the unit is used in a dusty environment you may need to clean it
on a weekly basis.
Warning: Never operate the unit without the filters.
Preparation for Storage
If you are not going to be using the unit for an extended period of time, follow the instructions
below before storing your unit:
1. Drain all water from the unit’s reservoir. Operate the unit in fan mode for a few hours to
thoroughly dry any moisture left on the coils inside the unit.
2. Power off the unit. Then clean or change the filters.
3. Unplug and carefully wind the power cord.
4. Remove the exhaust hose and duct connectors and keep them in a safe place.
If the unit will be stored in a garage, storage container, or warehouse, place it in a sturdy box with
plenty of packing material.
Caution: Do not transport or store the unit on its side or upside down.
14
Troubleshooting
Follow the troubleshooting guide below to resolve common issues.
Issue
My air conditioner is not
functioning at all.
My remote control does not work
and the indicator light on the
remote does not turn on.
My air conditioner is making a
loud noise.
My air conditioner is making a
continuous metallic knocking or
pinging sound.
My air conditioner is leaking.
My air conditioner runs for a little
while and then it trips the power
cord or the circuit breaker.
The control panel Water light is
on and the unit has stopped
running.
15
Possible Cause
The unit is not receiving
power.
The LCDI power cord is
tripped.
There is insufficient power.
The water reservoir is full.
The control panel is
disconnected.
The batteries are not installed.
The batteries are bad.
The batteries are installed
incorrectly.
The remote control is
defective.
The unit is not level.
A foreign object has jammed
the fan.
The floor below the unit is
uneven.
The unit may have been
shipped on its side.
The compressor is damaged.
The drain plug is removed.
The base pan is cracked.
The air conditioner may be
plugged into an outlet that
cannot supply the correct
amount of current.
The water reservoir is full.
Solution
Make sure the unit is plugged
in.
Press the Reset button on the
LCDI power cord.
Move the unit to another
outlet. Check your circuit
breaker. (Refer to the rating
label on the back of the unit
to determine the Amperage
draw).
Drain the unit and restart it.
If no indicator lights turn on,
contact customer service.
Install new batteries.
Replace the batteries.
Reinstall the batteries
correctly.
Contact customer service.
Make sure the unit is on a
level surface.
Remove the object from the
fan.
Move the unit to a level
surface.
Shut off the unit. Let the unit
sit on a level surface for at
least 24 hours and restart it.
Contact customer service.
Attach the drain plug.
Contact customer service.
Contact an electrician if the
unit works in a different room
or circuit.
Drain the unit.
Issue
Possible Cause
Solution
My air conditioner is not cooling
at all.
The unit is not operating in
cooling mode.
Set the unit to run in cooling
mode, and lower the set
temperature.
The compressor may take up
to 3 minutes to turn on, or
longer if it is too warm.
Allow the unit to begin cooling
the area before an ambient
temperature of 90° F is
reached.
Remove any obstructions in
the exhaust hose and port.
The unit must be vented.
Minimize the size of the area
to be cooled, i.e. adding a
drop ceiling. Use more than
one unit to cool the area, or
use a larger unit.
Close any open doors or
windows.
Remove or shut off additional
heat sources such as radio
equipment, servers, etc.
Properly insulate the room to
be cooled, i.e. using
fiberglass.
The unit may not work if the
room temperature is above
90° F.
Close the curtains or pull
down the blinds to minimize
the amount of direct sunlight
entering the room.
Clean the filter and replace it
if needed.
Carefully vacuum the coils
clean.
Remove anything blocking
the ports.
The compressor is not on.
The ambient temperature is
too high.
The exhaust port is blocked.
My air conditioner blows cold
air, but does not lower the room
temperature.
The unit is not vented.
The area of the room is too
large.
There are open windows and
doors.
There are too many heat
sources.
The room / garage may be
inadequately insulated.
The ambient temperature is
too high.
Direct sunlight is heating the
room.
The filter may be dusty or
blocked.
The condenser coils are dirty.
The air intake or exhaust ports
are obstructed.
Tip: Run the unit before it is needed. For example, run the unit in the morning before the area
gets hot, and continue to run the unit all day long in order to maintain a low temperature.
16
Specifications
17
Description of product
Portable Air Conditioner
Model
AP14001HS
Voltage / Frequency
115V / 60Hz
Input Power
1200 W Cooling
1200 W Heating
Cooling Capacity (SACC)
8600 BTU
Cooling Capacity (ASHRAE)
14000 BTU
Current
10.8 A Cooling
10.8 A Heating
Color
Black / Silver
Coolant
R-410A
Timer
24 Hour
Dimensions
HxWxD
35” x 18 ¾” x 15 ¾”
Weight
78.6 lbs.
New Portable Air Conditioner BTU’s
You may notice that the cooling capacities (in British Thermal Units or BTU’s) labeled on
portable air conditioners (PAC’s) are now lower than on models produced prior to October 1,
2017. This is because the labeling on new productions of PAC’s must follow a new federal test
standard that was established by the Department of Energy: 10 CFR 430, subpart B, appendix
CC.
The SACC rating shown on your new PAC is a result of this new standard. Models manufactured
before 2017 were tested under a different standard (ASHRAE) that produced a higher cooling
capacity output. While the SACC BTU’s are lower than the previous ASHRAE BTU’s, the
construction and cooling capacity of this model(s) remains unchanged. Both the SACC and
ASHRAE ratings are included for consumer comparison.
What is SACC?
SACC, or the Seasonally Adjusted Cooling Capacity, is a rating in BTU/hour that represents the
weighted average performance of a PAC in a number of test conditions, some of which may be
more extreme than the average use case, which is then adjusted to account for the effect of
infiltration air and duct heat transfer. The factors included in the SACC calculation are why the
ratings appear lower, even though the model(s) has not changed.
18
EdgeStar Limited Warranty
One (1) Year Parts & Ninety (90) Days Labor
This product is warranted by EdgeStar to be free from defective workmanship and materials, subject to any conditions set forth as
follows:
WHAT IS COVERED:
LABOR: For a period of NINETY (90) DAYS from the date of original purchase, labor will be performed free of charge at an
authorized EdgeStar repair facility. At its option, EdgeStar will repair the product with new or remanufactured parts, or exchange
the defective product with a new, refurbished, or remanufactured product. If a product is replaced, it will carry the remaining
warranty of the original product. After the ninety (90) day period, EdgeStar will no longer be responsible for labor charges
incurred. All defective products and parts covered by this warranty will be repaired or replaced on a mail-in basis to an EdgeStar
authorized repair facility.
PARTS: For a period of ONE (1) YEAR from the date of original purchase, EdgeStar will supply new, rebuilt, or refurbished parts free
of charge. EdgeStar may request a defective part be returned in exchange for the replacement part. All replacement parts or
products will be new, remanufactured, or refurbished. All products and parts replaced by EdgeStar under warranty service
become the property of EdgeStar.
This warranty applies to the original purchaser only, and only covers defects in workmanship experienced during operation of the
product under normal service, maintenance, and usage conditions. This warranty applies to the purchase and use of this product
in residential settings within the contiguous United States of America.
WHAT IS NOT COVERED:
The following limitations apply to the coverage of this warranty. This warranty does not cover:

Labor charges for installation, setup or training to use the product.

Shipping damage, and any damage caused by improper packaging for shipment to an authorized service center, and any
damaged caused by improper voltage or any other misuse, including abnormal service, handling, or usage.

Cosmetic damage such as scratches and dents.

Normal wear and tear on parts or replacement of parts designed to be replaced, e.g. filters, cartridges, batteries.

Service trips to deliver, pick-up, or repair, install the product, or to instruct in proper usage of the product.

Damages or operating problems resulting from misuse, abuse, operation outside environmental specifications, uses contrary
to instructions provided in the owner’s manual, accidents, acts of God, vermin, fire, flood, improper installation, unauthorized
service, maintenance negligence, unauthorized installation or modification, or rental or commercial use.

Labor, service transportation, and shipping charges incurred 91 days or more after the date of original purchase.

The use of EdgeStar products in commercial or rental settings.

Optional accessories, attachments, and appearance items.

Products that have been modified to perform outside of specifications without the prior written permission of EdgeStar.

Products lost in shipment, or theft.

Products sold AS IS or from an unauthorized reseller.

Products that have had their serial numbers removed or defaced. Products with serial numbers that have been invalidated.

Damage to personal property from use of product.

Replacement of repair of household fuses, circuit breakers, wiring, or plumbing.
OBTAINING WARRANTY SERVICE:
If you believe your product is defective, contact EdgeStar Customer Support for troubleshooting assistance and warranty service at
www.edgestar.com or 1-866-319-5473. Before contacting EdgeStar, have your serial number and proof of purchase available. Once an
EdgeStar authorized representative has confirmed that your product is defective and eligible for warranty service, the product must be
returned to an EdgeStar repair facility. The purchaser is solely responsible for prepaying all shipping related costs to and from the repair
facility. EdgeStar is not responsible for damage resulting from shipper mishandling or improper packaging. Do not return a defective
product to the place of purchase. Products received without a return authorization number will be refused.
THIS WARRANTY IS IN LIEU OF ANY OTHER WARRANTY, EXPRESSED OR IMPLIED, INCLUDING WITHOUT LIMITATION, ANY WARRANTY OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. TO THE EXTENT ANY IMPLIED WARRANTY IS REQUIRED BY LAW, IT IS LIMITED IN DURATION
TO THE EXPRESS WARRANTY PERIOD ABOVE. NEITHER THE MANUFACTURER NOR ITS DISTRIBUTORS SHALL BE LIABLE FOR ANY INCIDENTAL,
CONSEQUENTIAL, INDIRECT, SPECIAL, OR PUNITIVE DAMAGES OF ANY NATURE, INCLUDING WITHOUT LIMITATION, LOST REVENUES OR PROFITS, OR ANY
OTHER DAMAGE WHETHER BASED IN CONTRACT, TORT, OR OTHERWISE. IN NO EVENT AND UNDER NO CIRCUMSTANCE OF ANY TYPE OR KIND SHALL
THE SELLER, MANUFACTURER AND/OR DISTRIBUTOR BE LIABLE FOR ANY REASON, UNDER ANY THEORY, FOR MORE THAN THE BASIC COST OF
THE PRODUCT TO THE PURCHASER OR END USER. SOME STATES DO NOT ALLOW THE EXCLUSION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO
THE ABOVE EXCLUSION MAY NOT APPLY TO YOU. THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS. YOU MAY HAVE OTHER RIGHTS THAT VARY
FROM STATE TO STATE.
19
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising