NJX™ RG-6 Quad F Compression Connector Cable specific RG-6 Quad coax F compression connector designed for indoor applications. Inner post is “injected” into the cable during compression to permanently attach the connector to the coax. • Designed for indoor applications • Injection molded body reduces cost of installation • Connector post begins at the end of the nut and is “injected” into the connector by the compression tool. Connector does not get shorter during compression like traditional connectors. • 3GHZ, 75Ω rated for use in all video based applications such as cable and satellite television • >50lbs cable retention • Fits cables with .275” - .305” jacket diameter • Fits cables with .175” - .183” dielectric diameter • Requires industry standard 21mm compression stroke • Recommended compression tools: 30-793, 33-632 • Requires industry standard ¼” x ¼” cable preparation • Recommended IDEAL cable prep tool: 45-605 Part No. Qty 89‐041 10/Card Injection molded body Sliding center post One piece design Also available: 89‐040 RG‐6 NJX™ www.idealind.com 45‐605 30‐793 © IDEAL INDUSTRIES, INC.
* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project