Technika | TGDO84TBS | Instruction manual | Technika TGDO84TBS Oven Instruction Manual

Technika TGDO84TBS Oven Instruction Manual
Multifunction Double Ovens
TGDO84TBS
We recommend that you read the instructions in this owner’s manual carefully before use for the best performance and to extend the life of
your appliance, as it will provide you with all the instructions you require to ensure its safe installation, use and maintenance. Always keep this
owner’s manual close to hand since you may need to refer to it in the future. Thank you.
Close-up view
A
U
T
O
1
2
3
9
A. Control Panel
B. Cooking mode selection knob
C. Cooking temperature selection knob
D. Electronic programmer-Allows you to programmer the desired cooking by selecting the cooking time and the end cooking time. It can
also be used as a timer (only available on certain models)
E.
Oven indication light (only available on certain models)
-When lit, it indicates the ovens is heating up to the temperature set
F.
Dripping Pan or Baking Sheet
G.
Oven Rack
H.
Guides for sliding the racks or dripping in and out
I.
End Cooking Time Knob
1.
Timer
2.
Cooking time setting
3.
End cooking time setting
8.
Cook indicator
4.
Manual operation setting
9.
Clock
5.
Carrying forward button
6.
7.
Carrying backward button
Timer indicator
How to use your oven
This multi-function double oven combines the advantages of traditional convection ovens with those of the more modern fan assisted models
in a single appliance.
It is an extremely versatile appliance that allows you to choose easily and safely between different cooking modes. The various features
offered by the oven are selected by means of selector knob“B” and thermostat“C”situated on the control panel.
Push-in control knob (only available on certain models)
Control knob can be pushed in, and you can push the control knob lightly to release it or lock it.
Notice: The first time you use your appliance, we recommend that set the thermostat to the highest setting and leave the oven on for about
half an hour with nothing in it, with the oven door shut.Then,open the oven door and let the room air in. The odor that is often detected during
this initial use is due to the evaporation of substances used to protect the oven during storage and until it is installed.
Notice: Place the dripping pan provided on the bottom shelf of the oven to prevent any sauce and/or grease from dripping onto the bottom of
the oven only when grilling food or when using the rotisserie (only available on certain models). For all other types of cooking, never use the
bottom shelf and never place anything on the bottom of the oven when it is in operation because this could damage the enamel. Place your
cookware (dishes, aluminum foil, etc. etc.) On the grid provided with the appliance inserted especially along the oven guides.
Notice: to use the oven in manual mode (not using the end cooking time programmer); the
symbol must be aligned with the reference
mark on the control panel.
Convection mode
2100-2520W
Position of thermostat knob “C”:between 60℃and Max.on this setting ,The top and bottom heating elements come on .This is the
classic ,traditional type of oven which has been perfected ,with heat distribution and reduced energy consumption .The convection oven is still
unequalled when it comes to cooking dishes made up of ingredients ,e. g. cabbage with ribs ,Spanish style cod ,Ancona style stockfish ,tender
veal strips with rice ,etc .Excellent results are achieved when preparing veal or beef-based dishes as well (braised meats ,stew ,goulash, wild
game ,ham etc. )which need to cook slowly and basting or the addition of liquid .It remains the best system for baking cakes as well as fruit
and cooking using covered casserole dishes for oven baking .When cooking in convection mode ,only use one dripping pan or cooking rack
at a time ,otherwise the heat distribution will be uneven .Using the different rack heights available, you can balance the amount of heat
between the top and the bottom of the oven .Select from among the various rack heights based on whether
the dish needs more or less heat
from the top .
“Fast cooking”Mode
2125-2560W
Position of thermostat knob “C”:Between 60℃and Max.The top and bottom heating elements, as well as the fan ,will come
on ,guaranteeing constant heat distributed uniformly throughout the oven.
This mode is especially recommended for cooking pre-packed food quickly(as pre-heating is not necessary),such as for example:frozen or
pre-cooked food) as well as for a few “home-made”dishes.
The best results when cooking using the “Fast cooking”mode are obtained if you use one cooking only (the second from the bottom),please
see the table entitled “Practical Cooking Advice”.
Delicate cooking
1220-1460W/
1170-1380W
Position of thermostat knob“C”:Between 60℃and 250℃. The bottom heating element and the fan come on. Suitable for pastries, cakes
and non-dry sweets in baking tins or moulds. Excellent results are also obtained in cooking requiring above all heat from the bottom.
You are advised to put the pan on a low level.
“Top”oven
940-1110W
Position of thermostat knob “C”:Between 60℃and Max. The top heating element comes on .This mode can be used to brown food at the
end of cooking .
Grill
2090-2520W
Position of thermostat knob “C”: Max.The top central heating elements comes on .The extremely high and direct temperature of the grill
makes it possible to brown the surface of meats and roasts while locking the juices in to keep them tender .The grill is also highly
recommended for dishes that require a high temperature on the surface: beef steaks, veal, rib steak, filets, hamburgers etc …
Cook food with the oven door ajar.
Some grilling examples are included in the “Practical Cooking Advice ”paragraph .
Fan Assisted Grill
2100-2550W
Position of thermostat knob “C”:Between 60℃and 200℃. The top central heating elements and the fan come on. This combination of
features increases the effectiveness of the unidirectional thermal radiation of the heating elements through forced circulation of the air
throughout the oven. This helps prevent food from burning on the surface, allowing the heat to penetrate right into the food. Excellent results
are achieved with kebabs made with meats and vegetables, sausages, ribs lamb chops, chicken in a spicy sauce, quail, pork chops, etc.
Cook food in “fan assisted grill mode ”with the oven door shut .
This mode is also ideal for cooking fish steaks, like swordfish, stuffed cuttlefish etc.
Baking Mode
1660-2020W
Position of thermostat knob“C”:Between 60℃and 250℃.The rears heating element and the fan come on, guaranteeing delicate heat
distributed uniformly throughout the oven.
This mode is ideal for baking and cooking delicate foods-especially cakes that need to rise,and for the preparation of certain tartlets on 3
shelves at the same time. Here are a few examples: cream puffs, sweet and savory biscuits, savoury puffs, Swiss rolls and small portions of
vegetables au gratin, etc. ….
“Defrosting”Mode
45-55W
Position of thermostat knob “C ”:Any
The fan located on the bottom of the oven makes the air circulate at room temperature around the food .This is recommended for the
defrosting of all types of food ,but in particular for delicate types of food which do not require heat ,such as for example :ice cream
cakes ,cream or custard desserts ,fruit cakes .By using the fan ,the defrosting time is approximately halved .In the case of meat ,fish and
bread ,it is possible to accelerate the process using the “Baking”mode and setting the temperature to 80℃-100℃.
The turnspit (only available on certain models)
To start the turnspit, proceed as follows:
· place the oven tray on the 1st rack ;
· insert the special turnspit support on the 2nd rack and position the spit by inserting it through the special hole into the turnspit at the back
of the oven ;
· start the turnspit using knob “B”to select setting
.
End Cooking Time Knob (I) (only top oven available on “F6108” catena models double oven and only lower oven available on “F688” “F618”
catena models double oven)
This model is equipped with a timer to control when the oven shuts off during cooking. Position of timer knob “I”:Between 10minutes and
120 minutes.
At the end of the programmed length of time, the timer will sound and automatically turn off the oven.
6-keys timer procedure baking mode (only top oven available on “F6108” catena models double oven and only lower oven available on
“F688” “F618” catena models double oven)
Digital clock
-
Showing time:(0:00-24:00) and minutes.
-
The screen shows 3 glittery number and “AUTO”if the power is on.
-
In order to set the correct time, press the
button first, then + or - button to carry forward or backward the figure until the exact time
shows.
Manual operation setting
Press the
button to remove the flashing of “AUTO”.
If“AUTO”is flashing (automatic or semi automatic program has been set),press
button to remove“AUTO”and then the manual operation
process is on.
Automatic setting (set the time of full automatic starting and ending)
1.Press
button, set roast time;
2.Press
button, set roast finish time;
3.Set temperatures and roast modes by turning the thermostat knob and selector knob.
After the above setting, “AUTO”will be glittering, which means the roast process of the oven is set.
For example: if roast time takes 45 minutes and expect it will end at 14:00.
Press,
the roast time is to be 45 minutes;
Press,
the roast is set to end at 14:00.
After the above setting, the screen shows the real time(hour、minute)and flashing“AUTO”,it means the set roast process is memorized
automatically.
When the clock turns to be 13:15(or between 13:14-13:15), the oven will start automatically.
In the roast time,
and“AUTO”will be always flashing.
When the clock turns to be 14, the roast has been finished automatically. The alarm will ring and“AUTO” will flash, press the
button
and the ringing will stop.
Semi-automatic setting (set the time of automatic starting and ending)
A. Set the time limit of roast (10 hours maximum):
Press the
button to set the time of roast;
The oven starts immediately,
and“AUTO”will flash. After the roast is finished, the
roast operation process will be shut automatically. Then“AUTO”flashes, the alarm rings. The ringing will stop after the
button is pressed.
B. Set the time of ending (23 hours 59 minutes maximum):
Press the
button to set the time of ending;
The oven starts immediately,
and“AUTO”will flash. When the set time of ending is reached, the roast process will shut automatically.
Then“AUTO”flashes, the alarm rings. The ringing will stop after the
button is Pressed.
When the related button is pressed, the set roast process will be displayed. Whenever the
to “0”,the set roast process will be cancelled. When
button is pressed, and set backward the time
button is pressed again, the oven will revert to the manual operation process.
Timer
23 hours 59 minutes can be set as maximum.
To set the time, press the
(hour, minute) and the
is reached,
button, and then + or - button, until the required time is shown on the screen. After the setting, the correct time
button will show on the screen. When the
button is pressed the time displaced will be seen. When the set time
disappears and the alarm will ring again. To stop the alarm, press the
button.
Notice: After pressing the related button, setting is supposed to be done in 5 seconds. In case of blackout, the set process as well as the real
time (hour, minute) will disappear. After the power is on again, three“0”and “AUTO”shows on the screen, the oven will automatically
reset.
3-keys timer procedure baking mode (only available on certain models)
Adjust the clock after switch on:
Once it connected with electrical power, the display will show “12:00” with the square symbol above “
”;
Press the “+” or “-” button will increase or decrease the number until it reaches the right time; after 5 seconds it will start automatically
or you can press the function button to make it work.
Automatic setting (set the time of full automatic starting and ending)
1. Press the function button repeatedly until the square symbol above the “
” flashes, and press “+” or “-” button to set the
time frame baking for;
2. Press the function button repeatedly until the square symbol above the “
” flashes, and press “+” or “-” button to set
the time to switch off;
3. Adjusting the constant temperature button and choosing button to set temperature and baking method.
After these setting, the symbols above the “
” and “
” will flash, it indicates the baking procedure of oven has been set.
For example: if the food is required to bake for 45 minutes, and it is supposed to stop at 14:00.
Press the function button repeatedly until the square symbol above “
” flashes, and set the time of baking to 45 minutes;
Press the function button repeatedly until the square symbol above “
” flashed, and set the end time of baking at 14:00.
After these setting, the proper clock (hour, minute) and the square symbol will show on the display, it indicates the setting of baking procedure
has been remembered automatically.
When the clock shows at 13:15 (between 14 -15min), the oven will switch on automatically.
During the baking time frame, the square symbol will keep flashing.
When the clock shows14:00, baking will switch off automatically. The alarm will ring, the square symbol will flash, To stop the ringing press
any button.
Semi-automatic setting (set the time of automatic starting and ending)
A. setting the time frame of baking (10 hours longest)
Press the function button repeatedly until the square symbol above “
Switch on the oven immediately, the square symbol above “
“
”, and set the time frame of baking;
” begins to flash. When the baking is done the square symbol above
” will flash, and alarm ring, To stop the ringing press any button.
B. setting the end time off baking (23hours and 59minutes longest)
Press the function button repeatedly until the square symbol above “
Switch on the oven immediately, the square symbol above “
switch off automatically. The square symbol above “
” flashes, and set the end time of baking;
” begins to flash. When it reaches the time set, baking procedure will
” flashes, the alarm will ring, the square symbol will flash. To stop the ringing
press any button.
The set baking procedure could be seen by pressing any function button repeatedly at any time, only if the time frame of baking is at “0”
position. By adjusting the end time of baking to the current time, the set baking procedure can be cancelled.
Timer
The longest time frame can be set is 23 hours and 59 minutes. For setting time, press the function button repeatedly until the square symbol
above “
” flashes, and press “+” or “-” button until the time supposed shows on the display. After setting, the proper time
(hour, minute) and the square symbol above the “
the set time, the square symbol above the “
” begins to flash. In addition, the time countdown begins to work. When it reaches
” flashes, and the alarm will ring, the square symbol will flash, To stop the ringing press
any button.
Notice: press the relevant button, the setting must be carried out in 5 seconds; if electricity failure suddenly, all the set procedure and the
proper clock time (hour, minute) will disappear.
After electrical power is on again, “12:00” and the square symbol above “
” will show on the display, you need to set it again .
The oven light
Set knob “B”to the
symbol to turn it on .It lights the oven and stays on when any of the electrical heating elements in the oven come
on.
Cooling ventilation
In order to cool down the exterior of the appliance, this model is equipped with a cooling fan, which comes on automatically when the oven is
hot.
When the fan is on, a normal flow of air can be heard exiting between the oven door and the control panel.
Note: When cooking is done, the fan stays on until the oven cools down sufficiently.
How to Keep Your Oven in Shape
Before cleaning your oven, or performing maintenance, disconnect it from the power supply.
To extend the life of your oven, it must be cleaned frequently, keeping in mind that:
· the enameled or stainless steel parts should be washed with lukewarm water without using any abrasive powders or corrosive substances
which could ruin them ;Stainless steel could get stained .If these stains are difficult to remove, use special products available on the market.
After cleaning, it is advisable to rinse thoroughly and dry.
· the inside of the oven should preferably be cleaned immediately after use ,when it is still warm ,with hot water and soap ;The soap should
be rinsed away and the interior dried thoroughly. Avoid using abrasive detergents (for example cleaning powders, etc) and abrasive sponges
for dishes or acids (such as lime scale –remover, etc…) as these could damage the enamel .If the grease spots and dirt are particularly tough
to remove, use a special product for oven cleaning, following the instructions provided on the packet. Never use a steam cleaner for cleaning
inside of oven.
·
if you use your oven for an extended period of time ,condensation may form .Dry it using a soft cloth.
· there is a rubber seal surrounding the oven opening which guarantees its perfect functioning .Check the condition of this seal on a regular
basis .If necessary, clean it and avoid using abrasive products or objects to do so. Should it become damaged, please contacts you’re nearest
After-sales Service Center .We recommend you avoid using the oven until it has been repaired.
·
never line the oven bottom with aluminum foil ,as the consequent accumulation of heat could compromise the cooking and even damage
the enamel .
·
clean the glass door using non-abrasive products or sponges and dry it with a soft cloth .
How to Remove the Oven doors
For a more thorough clean, you can remove the oven door. Choose the remove and assemble method. Proceed as follows:
Oven door structures 1 remove and assemble procedure:
· Open the door to the full extent(fig.1);
· Open the lever A completely on the left and right hinges(fig.2);
· Hold the door as shown in fig.3
· Gently close the door(fig.3)until left and right hinge levers A are hooked to part B of the door(fig.4).
· withdraw the hinge hooks from their location following arrow C(fig.4);
· Rest the door on a soft surface;
· To replace the door, repeat the above steps in reverse order.
Removing the Inner Pane of Glass
· Double oven door: Remove the seal G by unscrew the no.2 bolts (fig.1)
· Gently pull out the inner pane of glass(fig.2)
· Clean the glass with an appropriate cleaner. Dry thoroughly, and place on a soft surface.
Now you can also clean the inside of the outer glass.
Replacing the Oven Lamp
·
Disconnect the oven from the power supply by means of the omni polar switch used to connect the appliance to the electrical mains ;or
unplug the appliance if the plug is accessible ;
· Remove the glass cover of the lamp-holder ;
· Remove the lamp and replace with a lamp resistant to high temperatures (300℃)with the following characteristics:
Voltage: 220-240V
Wattage: 25W
Type: E 14
· Replace the glass cover and reconnect the oven to the mains power supply .
Warranty & Service
FAQs and Troubleshooting
What should I do if the oven doesn’t heat up?
Check to see if one of the following actions resolves the issue:
● The oven may not be switched on. Switch the oven on.
● The clock may not be set. Set the clock (see section “Setting the clock”).
● Check to see if the required settings have been applied.
● A household fuse may have blown or a circuit breaker may have tripped. Replace the fuses
or reset the circuit. If this happens repeatedly, call an authorised electrician.
What should I do if, even though the oven function and temperature have been set, the oven
does not heat up?
There may be problems with the internal electrical connections. Call your local service centre.
What should I do if an error code appears and the oven does not heat up?
There is a fault in the internal electrical circuit connection. Call your local service centre.
What should I do if the time display is blinking?
There was a power failure. Set the clock (see section “Setting the clock”).
Warranty & Service(Continued)
What should I do if the oven light doesn’t illuminate?
The oven light is faulty. Replace the oven light bulb (see section “Changing the lamp”).
What should I do if the oven’s fan is running without having been set?
Following use, the oven’s fan runs until the oven has cooled down. Call your local service centre if the fan continues to run after the oven has
cooled down.
What should I do after heating for some time, the oven stops heating suddenly and all the electic parts do not work?
Check to see if one of the following actions resolves the issue:
● The automatic protect system works when the tempreture inside oven is very high. You should ask an prfessional technician to help you.
Open the back cover and push the button of tempreture limter with a tool, and then connect the oven to electric again。
● A household fuse may have blown or a circuit breaker may have tripped. Replace the fuses or reset the circuit. If this happens repeatedly,
call an authorised electrician.
Practical Cooking Advice
The oven offers a wide range of alternatives which allow you to cook any type of food in the best possible way. With time you will learn to
make the best use of this versatile cooking appliance and the following directions are only a guideline which may be varied according to your
own personal experience.
Preheating
If the oven must be preheated (this is generally the case when cooking leavened foods ),the“Multi-Cooking”mode and the
“Fast cooking”
mode can be used to reach the desired temperature as quickly as possible in order to save on energy .
Once the food has been placed in the oven, the most appropriate cooking mode can then be selected.
Cooking on More Than One Rack
If you have to cook food using several racks, use either the“baking”mode
,as these are the only mode that allow you to do so.
When cooking delicate food on more than one rack, use the“baking”mode, which allows you to cook on 3 racks at the same time(the 1st
3rd and 5th from the bottom).Some examples are included in the“Practical Cooking Advice”table.
When cooking other food on several racks, use the“Multi-Cooking”mode keeping the following suggestions in mind:
·
The oven is fitted with 5 racks .During fan assisted cooking, use two of the three central racks; the lowest and highest racks receive the
hot air directly and therefore delicate foodstuffs could be burnt on these racks.
·
As a general rule ,use the 2nd and 4th rack from the bottom ,placing the foodstuffs that require greater heat on the 2nd rack from the
bottom .For example, when cooking meat roasts together with other food, place the roast on the 2nd rack from the bottom and the more
delicate food on the 4th rack from the bottom.
· When cooking foodstuffs that require differing times and temperatures ,set a temperature that is somewhere between the two temperatures
required ,place the more delicate food on the 4th rack from the bottom and take the food requiring less time out of the oven first .
· Use the dripping pan on the lower rack and the grid on the upper ;
Using the“Fast Cooking”Mode
Functional,fast and practical for those of you who use pre-packed products (such as for example:frozen or pre-cooked food) along with other
food items.You will find useful suggestions in the“Practical Cooking Advice”table.
Using the Grill
This multi-function oven offers you 2 different grilling modes.
Use the “grill ”mode
, placing the food under the center of the grill (situated on the
3rd or 4th rack form the bottom )because only the central part of the top heating element is turned on .
Use the bottom rack (1st from the bottom), placing the dripping pan provided to collect any sauce and /or grease and prevent the same from
dripping onto the oven bottom. When using this mode, we recommend you set the thermostat to the highest setting. However, this does not
mean you cannot use lower temperatures, simply by adjusting the thermostat knob to the desired temperature.
Setting
“fan assisted grill ”, is extremely useful for grilling foods rapidly ,as the distribution of heat makes it possible not only to brown
the surface ,but also to cook the bottom part .
Moreover, it can also be used for browning foods at the end of the cooking process, such as adding that gratin finish to pasta bakes, for
example.
When using this mode, place the grid on the 2nd or 3rd oven rack from the bottom (see cooking table ) then ,to prevent fat and grease from
dripping onto the bottom of the oven and thus smoke from forming ,place a dripping-pan on the 1st rack from the bottom.
When using this mode ,we advise you to set the thermostat to 200℃,as it is the most efficient way to use the grill ,which is based on the use
of infrared rays .However, this does not mean you cannot use lower temperatures, simply by adjusting the thermostat knob to the desired
temperature.
Therefore the best results when using the grill modes are obtained by placing the grid on the lower racks (see cooking table) then, to
prevent fat and grease from dripping onto the bottom of the oven and smoke from forming, place a dripping-pan on the 1st oven rack
from the bottom.
Baking Cakes
When baking cakes ,always place them in a preheated oven .Make sure you wait until the oven has been preheated thoroughly (the end light
“E ”will turn off ).Do not open the oven door during baking to prevent the cake from dropping .In general:
Pastry is too dry
Increase the temperature by 10℃and reduce the cooking time .
Pastry dropped
Use less liquid or lower the temperature by 10℃.
Pastry is too dark on top
Place it on a lower rack, lower the temperature, and increase the cooking time.
Cooked well on the inside but sticky on the outside
Use less liquid, lower the temperature, and increase the cooking time.
The Pastry sticks to the pan
Grease the pan well and sprinkle it with a dusting of flour or use greaseproof paper.
I used more than one level (in the function “ventilated oven ”) and they are not all at the same cooking point
Use a lower temperature setting .It is not necessary to remove the food from all the racks at the same time.
Cooking Pizza
For best results when cooking pizza ,use the“Pizza Mode”
·
:
Preheat the oven for at least 10 minutes ;
· Use a light aluminum pizza pan ,placing it on the grid supplied with the oven .If the dripping pan is used, this will extend the cooking time,
making it difficult to get a crispy crust;
· Do not open the oven door frequently while the pizza is cooking ;
·
If the pizza has a lot of toppings (three of four ),we recommend you add the mozzarella cheese on top halfway through the cooking
process .
· When cooking pizza on two racks ,use the 2nd and 4th with a temperature of 220℃ and place the pizzas in the oven after having
preheated it for at least 10 minutes .
Cooking Fish and Meat
When cooking white meat ,fowl and fish ,use temperature setting from 180℃to 200℃.
For red meat that should be well done on the outside while tender and juicy in the inside ,it is a good idea to start with a high temperature
setting (200℃-220℃)for a short time ,then turn the oven down afterwards.
In general, the larger the roast, the lower the temperature setting. Place the meat on the center of the grid and place the dripping pan beneath
it to catch the fat.
Make sure that the grid is inserted so that it is in the center of the oven .If you would like to increase the amount of heat from below, use the
low rack heights .For savory roasts (especially duck and wild game), dress the meat with lard or bacon on the top.
Selector knob setting
Food to be cooked
Weight
Cooking rack
(in kg )
position from
bottom
1 Convection
2 Top Oven
Preheating
time
Thermostat
knob setting
(Minutes)
Cooking
time
(Minutes)
Duck
1
3
15
200
65-75
Roast veal or beef
1
3
15
200
70-75
Pork roast
1
3
15
200
70-80
Biscuits (short pastry)
-
3
15
180
15-20
Tarts
1
3
15
180
30-35
3/4
15
220
-
Browning food to perfect
-
Cooking
3 Defrosting
All frozen food
4 Grill
Soles and cuttlefish
1
4
5
Max
8-10
Squid and prawn kebabs
1
4
5
Max
6-8
Cod filet
1
4
5
Max
10
Grilled vegetables
1
3/4
5
Max
10-15
Veal steak
1
4
5
Max
15-20
Cutlets
1
4
5
Max
15-20
Hamburgers
1
4
5
Max
7-10
Mackerels
1
4
5
Max
15-20
Toasted sandwiches
-
4
5
Max
2-3
Chicken on the spit
1.0
-
5
Max
80-90
Lamb on the spit
1.5
-
5
Max
70-80
1.0
-
5
Max
70-80
Grilled chicken
1.5
3
5
200
55-60
Cuttlefish
1.5
3
5
200
30-35
Chicken on the spit
1.5
-
5
200
70-80
Chicken (on the spit)+potatoes
2.0
-
5
200
70-80
(roasted)
1.5
-
5
200
70-75
Lamb on the spit
-
2
5
200
70-75
1.5
-
5
200
70-80
5 Fan Assisted Grill
With rotisserie (where prevent)
Veal on the spit
6 Baking
With rotisserie (where prevent)
Veal on the spit
Tarts
Fruit cakes
Fruitcake
Sponge cake
Stuffed pancakes) on 2 racks)
Small cakes (0n 2 rakes)
Cheese puffs (on2 cakes)
Cream puffs (on 3 cakes)
0.5
1
0.7
0.5
1.2
3
2/3
3
3
2-4
15
15
15
15
15
180
180
180
160
200
20-30
40-45
40-50
25-30
30-35
0.6
0.4
0.7
0.7
0.5
2-4
2-4
1-3-5
1-3-5
1-3-5
15
15
15
15
15
190
210
180
180
90
20-25
15-20
20-25
20-25
180
0.3
0.4
0.5
0.3
0.5
0.4
0.4
2
2
2
2
2
2
2
-
250
200
220
200
200
180
220
12
20
30-35
25
35
25-30
15-20
0.4
2
-
200
20-25
0.3
0.6
0.2
2
2
2
-
200
180
210
15-18
45
10-12
Biscuits (0n 3 racks)
Meringues (0n 3 racks)
7 Fast cooking
Frozen food
Pizza
Courgette and prawn pie
Country style spinach pie
Turnovers
Lasagne
Golden Rolls
Chicken morseis
Pre-cooked food
Golden chicken wings
Fresh Food
Biscuits(short pastry)
Fruitcake
Cheese puffs
NB:cooking times are approximate and may vary according to personal taste .When cooking using the grill or fan assisted grill ,the dripping
pan must always be placed on the 1st oven rack from the bottom .
Safety Is A Good Habit To Get Into
To maintain the efficiency and safety of this appliance, we recommend that you do the following:
·
only call the Service Centers authorized by the manufacturer
·
always use original spare parts
·
in case of damage to the power cord, a special purpose cord or component bought from the manufacturer or maintenance
department shall be used for replacement
When handling the appliance, we recommend you always use the purpose provided handles recessed into the sides of the oven to
prevent harming people or damaging the appliance itself.
·
This appliance is designed for non-professional ,house-hold use and its functions must not be changed .
· The electrical system of this appliance can only be used safely when it is correctly connected to an efficient earthling system in compliance
with current safety standards .
· When the appliance is in use ,the heating elements and some parts of the oven door become extremely hot .Make sure you don’t
touch them and keep children well away.
·
Heat will be generated during its working. Caution must be observed to avoid touch of the heating element.
The following items are potentially dangerous, and therefore appropriate measures must be taken to prevent children and the
disabled from coming into contact with them:
-
Controls and the appliance in general;
-
Packaging (bags, polystyrene, nails, etc.);
-
The appliance itself, immediately after use of the oven or grill due to the heat generated;
-
The appliance itself, when no longer in use (potentially dangerous parts must be made safe).
Avoid the following:
-
Touching the appliance with wet parts of the body;
-
Using the appliance when barefoot;
-
Pulling on the or the supply cable to unplug it from the electrical outlet;
-
Improper or dangerous operations;
-
Obstructing the ventilation or heat dissipation slots;
-
Allowing power supply cables of small appliances to come into contact with the hot parts of the appliance;
-
Exposing the appliance to atmospheric agents such as rain, or sunlight;
-
Using the oven for storage purposes;
-
Using flammable liquids near the appliance;
-
Using adapters, multiple sockets and /or extension leads;
-
Attempting to install or repair the appliance without the assistance of qualified personnel.
Qualified personnel must be contacted in the following cases:
-
Installation (following the manufacturer’s instructions);
-
When in doubt about operating the appliance;
-
Replacing the electrical socket when it is not compatible with the appliance plug.
-
The temperature probe is a part of thermostat, if damaged; they shall be replaced overall by authorized service person.
Service Centers authorized by the manufacturer must be contacted in the following cases:
-
If in doubt about the soundness of the appliance after removing it from its packaging;
-
If the power supply cable has been damaged or needs to be replaced;
-
If the appliance breaks down or functions poorly; ask for original spare parts.
It is a good idea to do the following:
-
Steam cleaner cannot be used to clean the oven;
-
Only use the appliance to cook food and nothing else;
-
Check the soundness of the appliance after it has been unpacked;
-
Disconnect the appliance from the electrical mains if it is not functioning properly and before cleaning or performing maintenance;
-
When left unused, unplug the appliance form the electricity mains;
-
Use oven gloves to place cookware in the oven or when removing it;
-
Always grip the oven door handle in the center as the extremities of the same may be hot due to any hot air leaks;
-
Make sure the knobs are in the “
-
Cut the power supply cable after disconnecting it from the mains when you decide not to use the appliance any longer.
”/“
”position when the appliance is not in use ;
·The manufacturer may not be held responsible for any damage due to :Incorrect installation, improper, incorrect and irrational use.
Installation
Only a qualified person in compliance with the instructions provided must install the appliance. The manufacturer declines all
responsibility for improper installation, which may harm persons and animals and damage property.
Important: - The power supply to the appliance must be cut off before any adjustments or maintenance work is done on it;
- Air duct is supposed to use in Ventilation.
Installation of Built-in double Ovens
In order to ensure that the built-in appliance functions properly, the cabinet containing it must be appropriate .The figure below gives the
dimensions of the cut-out for installation under the counter or in a wall cabinet unit.
N. B :Installation in compliance with the consumption declaration
In order to ensure adequate ventilation ,the back panel of the cabinet unit must be removed . If the double oven rests on a continuous ,flat
surface ,there must be an aperture of at least 15×560mm .
The panels of the adjacent cabinets must be made of heat-resistant material .In particular ,cabinets with a veneer exterior must be assembled
with glues which can withstand temperatures of up to 100℃.
In compliance with current safety standards, contact with the electrical parts of the oven must not be possible once it has
been installed.
All parts, which ensure the safe operation of the appliance, must be removable only with the aid of a tool.
To fasten the oven to the cabinet, open the door of the oven and attach it by inserting the 4 wooden screws into the 4 holes located on the
perimeter of the frame.
Electrical Connection
Those double ovens equipped with a three-pole power supply cable are designed to operate with an alternating current .The wire for earthling
the appliance is yellow-green in color.
Fitting on a Power Supply Cable
Opening the terminal board:
· Using a screwdriver ,prize the bolt on the side tabs of the cable board cover ;
· Using a screwdriver unhooking the no.2fixing hooks(A-B), pull open the cover of the terminal board.
To install the cable, proceed as follows:
· Remove the wire clamp screw and the three contact screws L-N· Fasten the wires beneath the screw heads using the following color scheme :Blue (N) Brown (L) Yellow-Green
·
Fasten the supply cable in place with the clamp and close the cover of the terminal board.
Connecting the supply cable to the mains
Install a standardized plug corresponding to the load indicated on the data plate. When connecting the cable directly to the mains, install an
omni polar circuit breaker with a minimum contact opening of 3 mm between the appliance and the mains .The omni polar circuit breaker
should be sized according to the load and should comply with current regulations (the earth wire should not be interrupted by the circuit
breaker).
The supply cable should be positioned so that it does not reach a temperature of more than 50 ℃with respect to the room
temperature ,anywhere along its length , or protected by insulation sleeping having an appropriate rating.
Before making the connection, check that:
·
The electrical safety of this appliance can only be guaranteed if the cooker is correctly and efficiently earthed ,in compliance with
regulations on electrical safety. Always ensure that the earthling is efficient; if you have any doubts call in a qualified technician to check the
system .The manufacturer declines all responsibility for damage resulting from a system which has not been earthed.
·
Before plugging the appliance into the mains ,check that the specifications indicated on the date plate (on the appliance and /or
packaging )correspond to those of the electrical mains system of your home .
· Check that the electrical capacity of the system and sockets will support the maximum power of the appliance ,as indicated on the data
plate .If you have any doubts, call in a qualified technician.
·
If the socket and appliance plug are not compatible ,have the socket replaced with a suitable model by a qualified technician . The latter,
in particular, will also have to ensure that the cross section of the socket cables are suitable for the power absorbed by the appliance. The use
of adapters, multiple sockets and /or extensions, is not recommended. If their use cannot be avoided, remember to use only single or multiple
adapters and extensions which comply with current safety regulations .In these cases, never exceed the maximum current capacity indicated
on the single adapter or extension and the maximum power indicated on the multiple adapter .The plug and socket must be easily
accessible.
If a socket and plug connection is used, check that they are of the same type. Do not use reducers, adapters or junctions since they may
cause overheating or burns.
Operation at 220-240 V~: use a type H05RR-F three-wire cable
(Cable of 3 x 2.5
mm²).
The earth wire (yellow-green) must be at least 20 mm longer than
the other wires at the end for connection to the appliance.
The manufacturer declines all responsibility for injury or damage caused by failure to comply with the above regulations or deriving from
tampering with even just one part of the appliance.
Technical Specifications
Inner dimensions of the double oven:
“F6108” catena models double oven: Inner Volume two 56 liters
“F688” catena models double oven: Inner Volume top 35 liters, lower 56 liters
“F688” catena models double oven: Inner Volume top 35 liters, lower 45 liters
56 liters
45 liters
35 liters
Width
43.5cm
43.5cm
43.5cm
Depth
40cm
42cm
43cm
Height
32cm
24.6cm
18.5cm
Voltage and Frequency of Power Supply:
220-240V ~50/60Hz or 50Hz
Meaning of crossed –out wheeled dustbin:
Do not dispose of electrical appliances as unsorted municipal waste, use separate collection facilities.
Contact you local government for information regarding the collection systems available.
If electrical appliances are disposed of in landfills or dumbs,hazardous substances can leak into the groundwater and get into the food
chain,damaging your health and well-being.
When replacing old appliances with new ones, the retailer is legally obligated to take back your old appliance for disposals at least free of
charge.
READ THE INSTRUCTION BOOKLET BEFORE INSTALLING AND USING THE APPLIANCE.
The manufacturer will not be responsible for any damage to property or to persons caused by incorrect installation or
improper use of the appliance.
The manufacturer is not responsible for any inaccuracies, due to printing or transcription errors, contained in this
handout. In addition, the appearance of the figures reported is also purely indicative.
The manufacturer reserves the right to make changes to its products when considered necessary and useful, without
affecting the essential safety and operating characteristics.
Technika constantly seeks ways to improve the specifications and designs of their products.
Whilst every effort is made to produce up to date literature, this document should not be regarded as an infallible guide.
Actual product only should be used to derive cut out sizes.
All Technika Appliances must be installed by a qualified person/s with adherence to the relevant electrical, plumbing and
AGA codes, with compliance being issued as required by state or national legislation.
Additionally all Technika Upright cookers must have chains installed correctly in adherence to the relevant AGA, and
plumbing codes by the Licenced installer.
For maximum effectiveness and efficiency all rangehoods should be installed with the use of ductwork, by a licenced
installer with adherence to the relevant state and national building codes and regulations.
All Technika appliances are for Domestic use only, and must be installed by a licence installer into Domestic Applications
only, without exception and to the required Authorities guidelines. Any installation outside of this will VOID warranty.
Alfresco areas are not a Domestic application.
TECHNIKA
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising