URC | TKP-2000 | Owners manual | URC TKP-2000 Owners Manual

URC TKP-2000 Owners Manual
Owner’s Manual
TKP-2000
Network Keypad
TKP-2000 Installation Manual ©2011-2014 Universal Remote Control, Inc.
The information in this Owner’s Manual is copyright protected. No part of this
manual may be copied or reproduced in any form without prior written
consent from Universal Remote Control, Inc.
UNIVERSAL REMOTE CONTROL, INC. SHALL NOT BE LIABLE FOR OPERATIONAL, TECHNICAL OR EDITORIAL ERRORS/OMISSIONS MADE IN
THIS MANUAL.
The information in this Owner’s Manual may be subject to change without
prior notice.
Total Control is a registered trademark of Universal Remote Control,
Inc.
URC Control the Experience is a registered trademark of Universal
Remote Control, Inc.
All other brand or product names are trademarks or registered trademarks
of their respective companies or organizations.
Universal Remote Control,Inc.
500 Mamaroneck Avenue, Harrison, NY 10528
Phone: (914) 835-4484 Fax: (914) 835-4532
TABLE OF CONTENTS
Congratulations!
1
Features and Benefits
2
Parts List
2
TKP-2000 Product Description
3
Displaying the Settings Screen
4
Adjusting Sleep Settings
4
Button Light Settings
4
Setting Date and Time
4
Sound
5
Adjusting Brightness
5
System
5
Network
5
Factory Default
6
Exit
6
Frequently Asked Questions
7
Specifications
7
Limited Warranty Statement
8
End User Agreement
10
Federal Communication Commission
Interference Statement
11
Regulatory Information to the user
12
Declaration of Conformity
13
TKP-2000 NETWORK KEYPAD
Congratulations!
You've purchased a unique synthesis of hardware and software engineering,
the Total Control TKP-2000 Network Keypad. The TKP-2000 achieves a
magnificent combination of power and flexibility by simplifying and
automating the operation of even the most complex systems.
The TKP-2000 has the ability to control audio video components, energy
management devices, multi-zone matrixes, PCs, iPods and whole house
URC Lighting. It communicates over the Local Area Network (LAN) to the
MRX Advanced System Controller.
An MRX Advanced System Controller is REQUIRED for the TKP-2000 to
operate. The combination of the TKP-2000 and MRX-10 create a robust and
powerful system to control the Total Control product line and your home
theatre equipment.
Page 1
TKP-2000 NETWORK KEYPAD
Features and Benefits
Two-Way Control Of Devices
With the URC two-way database you can control (with feedback)
all compatible brands of receivers, lighting systems, alarms and thermostats.
Two-Way Control of Media on PSX-2 and SNP-1
The high speed of the LAN enables the TKP-2000 to display lists of
artists, albums or songs and to display the cover art of the selected
album on the Now Playing screen of the remote control from the
PSX-2 Personal Server or from the SNP-1 Streaming Network Player.
Backlit Color LCD screen
The TKP-2000 has a programmable 3.5” color LCD screen and backlit
"hard" buttons. When any button is pressed the color LCD screen
will turn on, and the "hard" buttons will illuminate.
User Configurable Information Feeds for News, Sports, Stocks and
Weather
The well known URC modules for News, Sports, Weather and Stocks
are all available, configured for the TKP-2000 screen. Of course these
are all user configurable.
No batteries to replace...Ever!
The TKP-2000 is powered over the Ethernet cable it's connected to,
so you never have to worry about replacing batteries.
Parts List
The TKP-2000 Network Keypad includes:
1 - TKP-2000 In-Wall Network Keypad
1 - Owner's Manual
4 - Screws for mounting to a wall box
Page 2
TKP-2000 NETWORK KEYPAD
TKP-2000 Product Description
The TKP-2000 consists of a 3.5” color touchscreen and 6 customizable
buttons. Your whole house custom installer can request custom buttons
specific to your Total Control setup.
Power: Turn ON the room where the TKP-2000 is located (or any other
room if using the Rooms Menu)
Lights: Press to control URC Lighting throughout your home.
Main: Press to view the main screen and control the Total Control system.
Vol+, Vol- and Mute: Easily adjust the volume settings for any zone.
LAN port: This is connected by your whole house custom installer to
your home network via Ethernet cable to a PoE (Power over
Ethernet) switch.
Page 3
TKP-2000 NETWORK KEYPAD
Displaying the Settings Screen
You can adjust the settings of the TKP-2000
whenever you like by pressing and holding
both the MAIN and MUTE buttons for five
seconds. When you do, the screen will change
to the SETTINGS screen. If you do not press
any button on the SETTINGS screen within
1 minute, the TKP-2000 will time out and
automatically return to normal operation.
Adjusting Sleep Settings
Conserve energy by configuring the
keypad to fall asleep after a specified
amount of time. Select a time from the
drop down list.
Button Light Settings
Conserve energy by opting to turn
off the LED lighting behind the buttons.
Setting Date and Time
Your TKP-2000 may have been programmed
to display the date or time on the touch screen.
If you need to, you can adjust the time displayed
by changing the settings on this screen.
Page 4
TKP-2000 NETWORK KEYPAD
Sound
Your TKP-2000 may have been programmed
to make acknowledgement tones. This is
optional, and some professional installers
may prefer to keep it silent. However, you
can adjust the volume to any level you like
by touching and dragging the volume
control here.
Adjusting Brightness
Simply touch and drag the brightness
slider to the desired level.
System
The System Information screen displays
data about your TKP-2000's operating
system, memory etc.
Network
The Network screen displays network
information about your TKP-2000 and
the network it is connected to.
Page 5
TKP-2000 NETWORK KEYPAD
Factory Default
WARNING!
Only use this button when instructed to
by Technical Support.
It resets the memory of the TKP-2000 to
the factory condition. All your programming
will be lost!
Exit
When you have finished adjusting Settings, simply tap the EXIT button
to return to normal operation.
Page 6
TKP-2000 NETWORK KEYPAD
Frequently Asked Questions
How do I update the firmware?
Periodically there will be firmware updates for the TKP-2000. As the
TKP-2000 is connected to your home network, your installer has
the ability to update the firmware via Off-Site programming.
How do I reset a TKP-2000?
Remove the front cover of the TKP-2000. Use a pen or pointed object
device to depress the button and reset the unit.
How do I erase a TKP-2000?
Press and hold Main + Mute for 3 seconds then select the Factory
Default button.
Specifications
Microprocessor: 190MHz RISC
Memory: 128MB Flash
Devices: Supports up to 255 Devices
Pages: Supports up to 255 Pages on each Device
Macro Capability: Up to 255 steps
Network: One 10/100 Ethernet port (PoE)
LCD : 3.5 inch (320x240 )
Weight: 9.84 oz
Size: 5.75” x 4.7” x 1.8”
Power : Standard PoE Injector or PoE Switch (Purchased separately)
Page 7
TKP-2000 NETWORK KEYPAD
Limited Warranty Statement
1. LIMITED WARRANTY AND DISCLAIMERS
Universal Remote Control, Inc. (“URC”) warrants that URC equipment
purchased directly from URC or from an authorized URC dealer or
distributor shall be free from defects in material and workmanship under
normal usage for a period of one (1) year from the date of purchase of the
product by the end-user, but no longer than thirty-six (36) months from the
date of shipment of the URC equipment by URC to an authorized URC
dealer or distributor, except that with respect to Total Control® wholehouse products, the warranty extends for two (2) years from the date of
purchase by the end-user, but no longer than forty-eight (48) months from
the date of shipment of the URC equipment by URC to an authorized URC
dealer or distributor.
This limited warranty is valid only in the United States of America.
URC equipment purchased from other than an authorized URC dealer or
distributor is without warranty.
URC warrants that the software will substantially conform in any material
respect to its functional specifications at the time of delivery. URC SHALL
NOT BE LIABLE FOR OPERATIONAL, TECHNICAL OR EDITORIAL
ERRORS AND/OR OMISSIONS MADE IN THE URC DOCUMENTATION.
URC DOES NOT WARRANT THAT THE URC SOFTWARE IS BUG-FREE
OR ERROR FREE OR THAT THERE ARE NO ERRORS/BUGS IN THE URC
SOFTWARE.
URC warrants that at the time of purchase the URC equipment and the
URC software complied with all applicable regulations and policies of the
Federal Communications Commission ("FCC") regarding electromagnetic
interference caused by electronic/computing devices and to the extent that
the URC equipment and/or the URC software fails to so comply, URC
shall, at its own expense, take all reasonable measures to promptly cause
such to comply.
THIS LIMITED WARRANTY DOES NOT COVER TECHNICAL ASSISTANCE
FOR HARDWARE OR SOFTWARE USAGE EXCEPT AS EXPRESSLY
PROVIDED FOR HEREIN.
CERTAIN IMPLIED WARRANTIES, INCLUDING AN IMPLIED WARRANTY
OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE,
MAY BE AVAILABLE WITH RESPECT TO URC EQUIPMENT. IMPLIED
WARRANTIES VARY FROM STATE TO STATE. URC EXPRESSLY LIMITS
THESE IMPLIED WARRANTIES, TO THE EXTENT ALLOWABLE BY LAW,
TO THE TIME PERIODS COVERED BY THE EXPRESS WRITTEN
WARRANTIES PROVIDED HEREIN. OTHERWISE AND
EXCEPT AS PROVIDED FOR HEREIN, URC EXPRESSLY DISCLAIMS ALL
WARRANTIES, EXPRESS, STATUTORY OR IMPLIED, AND MAKES NO
REPRESENTATIONS REGARDING THE USE OF, OR THE RESULTS OF
THE USE OF, THE EQUIPMENT, SOFTWARE OR DOCUMENTATION IN
TERMS OF CORRECTNESS, ACCURACY, RELIABILITY OR OTHERWISE.
Page 8
TKP-2000 NETWORK KEYPAD
EXCEPT AS EXPRESSLY PROVIDED FOR HEREIN, TECHNICAL SERVICES
ARE SUPPLIED "AS IS", WITHOUT ANY WARRANTY, EXPRESS,
STATUTORY OR IMPLIED, OF ANY KIND. TO THE MAXIMUM EXTENT
PERMITTED BY APPLICABLE LAW, URC EXPRESSLY DISCLAIMS ALL
WARRANTIES RELATING TO TECHNICAL SERVICES, EXPRESS,
STATUTORY OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE
WARRANTIES OF QUALITY OR REASONABLE SKILL AND CARE, OR
OUTCOME OR RESULTS.
WITHOUT IN ANY WAY LIMITING THE GENERALITY OF THE OTHER
PROVISIONS HEREIN, THIS LIMITED WARRANTY DOES NOT COVER: (I)
DAMAGE FROM MISUSE, NEGLECT OR ACTS OF NATURE, (II)
MODIFICATIONS, (III) INTEGRATION WITH THIRD PARTY CONTENT,
OR (IV) BEYOND THE WARRANTY PERIOD AND/ OR FAILURE TO
FOLLOW URC WARRANTY CLAIM PROCEDURE.
The warranty limitations and warranty disclaimers may not apply to end
user in whole or in part, where such are restricted or excluded by
applicable law, and such shall apply to the maximum extent permitted by
applicable law.
In the event of any warranty claim, URC will, at its sole option, repair the
URC equipment using new or comparable rebuilt parts, or exchange the
URC equipment for new or rebuilt equipment. In the event of a defect,
these are the end user's exclusive remedies.
All the URC equipment returned for service, exchange or repair require an
RGA number. To obtain an RGA number, you must complete a Return
Request Form which you may obtain by calling (914) 835-4484 or
contacting URC at returnrequest@universalremote.com. To obtain warranty
service, end user must deliver the URC equipment, freight prepaid, in its
original packaging or packaging affording adequate protection to URC at
420 Columbus Avenue, Valhalla, NY 10595. It is end user's responsibility
to backup any macro programming, artwork, software or other materials
that may have been programmed into the unit. It is likely that such data,
software, or other materials will be lost during service and URC will not be
responsible for any such damage or loss. A dated purchase receipt, bill of
sale, installation contract or other verifiable proof of purchase is required.
For the URC equipment support and other important information, please
visit URC's website available at www.universalremote.com or call the
Customer Service Center at (914) 835-4484.
This limited warranty only covers the URC equipment issues caused by
defects in material or workmanship during ordinary consumer use. It does
not cover product issues caused by any other reason, including but not
limited to product issues due to commercial use, acts of God, third-party
installation, misuse, limitations of technology, or modification of or to any
part of the URC equipment. This limited warranty does not cover the URC
equipment sold as used, as is, refurbished, so called "B stock" or
consumables (such as batteries). This limited warranty is invalid if the
factory applied serial number has been altered or removed from the URC
equipment. This limited warranty specifically excludes the URC
equipment sold by unauthorized resellers.
Page 9
TKP-2000 NETWORK KEYPAD
With the exception of URC's IR-only, broad-based consumer remotes, none
of URC's PC programmable remotes or any of our Total Control® wholehouse equipment are authorized for online internet sales. Buying URC's PC
programmable remotes or any of our Total Control® whole-house
equipment online means buying equipment that does not have URC's
limited warranty. Such equipment is not eligible for URC tech support or
software support, either.
2. URC'S LIMITATIONS OF LIABILITY
IN NO EVENT SHALL URC BE LIABLE FOR INDIRECT, SPECIAL,
INCIDENTAL, EXEMPLARY, PUNITIVE OR CONSEQUENTIAL DAMAGES
OF ANY KIND OR LOSS OF PROFITS OR BUSINESS OPPORTUNITY,
EVEN IF URC IS ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
IN NO EVENT SHALL URC BE LIABLE FOR LOSS OF OR DAMAGE TO
DATA, COMPUTER SYSTEMS OR COMPUTER PROGRAMS.
URC'S LIABILITY, IF ANY, FOR DIRECT DAMAGES OF ANY FORM SHALL
BE LIMITED TO ACTUAL DAMAGES, NOT IN EXCESS OF AMOUNTS
PAID BY END USER FOR THE URC EQUIPMENT.
IN NO EVENT SHALL URC BE LIABLE FOR ANY EVENTS BEYOND ITS
CONTROL, INCLUDING ANY INSTANCE OF FORCE MAJEURE.
IN NO EVENT SHALL URC BE LIABLE FOR THE ACTS OR OMISSIONS OF
END USER OR ANY THIRD PARTY.
THE LIMITATIONS OF LIABILITY MAY NOT APPLY TO END USER IN
WHOLE OR IN PART, WHERE SUCH ARE RESTRICTED LIMITED OR
EXCLUDED BY APPLICABLE LAW AND SUCH SHALL APPLY TO THE
MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW.
URC SHALL NOT BE HELD RESPONSIBLE FOR THE STATEMENTS MADE
BY OTHERS.
SOME STATES OR JURISDICTIONS DO NOT ALLOW THE EXCLUSION
OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, OR
ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS,
SO THE ABOVE LIMITATIONS OR EXCLUSIONS MAY NOT APPLY TO
END USER. THIS LIMITED WARRANTY GIVES END USER SPECIFIC LEGAL
RIGHTS AND END USER MAY HAVE OTHER RIGHTS WHICH VARY
FROM STATE TO STATE OR JURISDICTION TO JURISDICTION.
End User Agreement
The terms and conditions of the End User Agreement available at
www.universalremote.com/eua.php shall apply.
Page 10
TKP-2000 NETWORK KEYPAD
Federal Communication Commission
Interference Statement
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one more of the following
measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for
help.
Warning!
Changes or modifications not expressly approved by the manufacturer could
void the user's authority to operate the equipment.
Note : The manufacturer is not responsible for any Radio or TV interference
caused by unauthorized modifications to this equipment. Such modifications
could void the user's authority to operate the equipment.
FCC Caution
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference,
and (2) this device must accept any interference received, including interference
that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible
for compliance could void the authority to operate equipment.
Page 11
TKP-2000 NETWORK KEYPAD
Regulatory Information to the user
CE conformity Notice
Products with “CE” marking comply EMC Directive 2004/108/EC issued
by the commission of the European Community.
1) EMC Directive
Emission
Immunity
Power
: EN 55022
: EN 55024
: EN-61000-3-2, 3
Declaration of Conformity
“Hereby, Universal Remote Control Inc. declares that this TKP-2000 is in
compliance with the Essential requirements and other relevant provisions
of EMC Directive 2004/108/EC.”
Certification
Type No.(Model No.)
Batch/Serial No.
Power Rating
TKP-2000
48.0V
, 0.32A
Page 12
TKP-2000 NETWORK KEYPAD
Declaration of Conformity
Company Name
:
Universal Remote Control Inc.
Company Address
:
Contact Information
:
Brand Name
:
500 Mamaroneck Avenue, Harrison, NY 10528, U.S.A
www.universalremote.com
Phone: (914)835-4484 Fax: (914)835-4532
UNIVERSAL remote control
Product Name
:
Network Keypad
Model Name
:
TKP-2000
This product herewith complies with the requirements of EMC Directive (2004/108/EC)
issued by the Commission of the European Community
Compliance with these directives implies conformity to the following European Community
EMC Directive
EN 55022
EN 55024
EN 61000-3-2
EN 61000-3-3
List of test reports and/or certificate verified compliance with the standards above
EMC Directive
Report No.
Testi ng Labora tory
Date of issue
: Gumi College EMC Center
:
Name and signature of authorized person :
Page 13
April 30, 2011
James Novak
Senior Product Manager
Universal Remote Control Inc.
NOTE
Page 14
NOTE
Page 15
500 Mamaroneck Avenue, Harrison, NY 10528
Phone: (914) 835-4484 Fax: (914) 835-4532
www.universalremote.com
OCE-0080C Rev 04_RH
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising