URC | TRC-1480 | Owners manual | URC TRC-1480 Owners Manual

URC TRC-1480 Owners Manual
Owner’s Manual
Table of Contents
Congratulations!.................................................................................................................................................................................................................................................................1
Features & Benefits...........................................................................................................................................................................................................................................................1
Requirements & Compatibility.........................................................................................................................................................................................................................................2
Parts......................................................................................................................................................................................................................................................................................2
Connecting the Battery Pack...........................................................................................................................................................................................................................................3
Using the Charging Cradle................................................................................................................................................................................................................................................3
Two-way via Wi-Fi (2.4GHz & 5GHz)..............................................................................................................................................................................................................................3
Using the TRC-1480............................................................................................................................................................................................................................................................4
Displaying the Setup Menu..............................................................................................................................................................................................................................................8
Specifications...................................................................................................................................................................................................................................................................18
Limited Warranty..............................................................................................................................................................................................................................................................19
Congratulations!
Thank you for purchasing the TRC-1480 Wi-Fi remote control for your Total Control 2.0
system. The TRC-1480 communicates with your Total Control 2.0 system via the local
wireless network to control devices throughout your home/business.
Use the TRC-1480 to navigate through rooms, menus, and control your system’s
audio/video devices, climate, lighting, and more.
Features & Benefits:
● Quick Connect Wi-Fi
When woken up, the remote connects to the wireless network (2.4 GHz or
5GHz) almost instantly for control of your system and devices.
● Two-way Metadata Feedback:
Experience feedback directly on the TRC-1480’s 2.4” display when used with an
ever expanding line of 3rd Party modules such as HEOS, Ecobee, Sonos, Roku
and many more.
Consult with your certified URC integrator to learn more about compatible 3rd
party integration.
● Voice Assistant Ready:
Enable the built-in Amazon Alexa service to send commands verbally directly
from the remote by pushing the press-to-talk microphone button
● H264 IP Camera Support:
View almost any security camera directly on the TRC-1480’s display. The
TRC-1480 supports high quality camera streams. Ask your certified URC
integrator for further details.
1
Requirements & Compatibility:
● Total Control 2.0:
The TRC-1480 requires an MRX Advanced System Controller on the network and
must be programmed by a certified Total Control integrator. When programmed,
the TRC-1480 is capable of controlling devices around the home/business
without being within “line-of-sight” of the equipment by sending commands
over the wireless (Wi-Fi) network.
TRC-1480
Parts:
Charging Cradle
● TRC-1480 Wi-Fi Remote Control
● Li-ion Rechargeable Battery
● Charging Dock
Power Adapter
● Power Adapter
● USB Type C Cable
Rechargeable Battery
USB Type C Cable
2
Connecting the Battery Pack:
A battery is included in the box when shipped from the factory. Press the spring lock
down to unlock and remove the cover. Place the battery into the battery compartment,
making sure to align the contacts on the battery with the contacts within the TRC-1480’s
battery compartment. The battery snaps into place when aligned properly. Replace the
battery cover.
Using the Charging Cradle:
Plug the 5V DC adapter into a power outlet and into the rear of the charging cradle.
Gently place the TRC-1480 into the cradle, so that the remote automatically aligns itself
to the contacts on the charging cradle. The status light immediately illuminates.
It is possible to connect the USB Type C cable directly into the bottom of the TRC-1480.
There are three (3) Status light conditions:
● Red: Indicates the the remote’s battery is charging
● Blue: Indicates that the remote’s battery is off the charging dock
● White: Indicates that the remote’s battery is fully charged
Two-way via Wi-Fi (2.4 GHz or 5GHz):
The TRC-1480 has the capability of providing two-way control of supported devices
directly on the 2.4” LCD touch-screen display. These devices must be configured in the
Total Control program file. Consult your custom integrator for additional details.
3
Using the TRC-1480:
The Main Menu pages display activities and/or devices. Press the Main button to access
the Main Menu. Larger systems may have more than one (1) page. Press either of the
Page buttons to view additional Main Menu pages.
Although the TRC-1480 is programmed with custom layouts and devices, there are
persistent buttons that maintain a steady function:
a. Rooms Menu: This button displays a list of rooms and allows the user to swap
between them for control.
b. Room Off/House Off: With a single press of this button, the Total Control
system turns off all the devices of the current room.
Press-n-hold this button for greater than three (3) seconds to display the
system’s Power Menu. This menu allows the user to turn off the room, the
entire system, or any custom activity programmed by the custom integrator.
c. Capacitive Touch Screen: The specific function of each button is linked to the
screen icon associated to the LCD screen. These buttons are used to select
activities, devices, functions, navigate, and more. Speak with your custom
integrator for more details.
d. Page Left/Right: These buttons are used to navigate through the various Main
Menu and Device/Activity Menu pages.
e. Main: By default, this button returns the user to the previous menu.
f. Vol+, Vol-, & Mute: Used to increase, decrease, or toggle the mute status of
the active audio device.
g. CH+, CH-, & Prev: Used to change a cable/SAT channel up or down or to
navigate through a device’s on-screen menus. The Prev button returns to the
device’s previous channel or can be used to return the user to a
previous menu.
4
h. Shortcuts: Displays the customizable shortcuts menu. This menu can only
contain shortcuts to room-based devices/activities.
i. Now Playing: Returns the user to the current activity/device menu regardless
of what screen is on display.
j. Microphone: Select this button to interact with the native voice assistant
service. When pressed, the microphone activates and listens to your verbal
commands. The microphone is shut off when the button is no longer pressed.
k. Navigation Keys: Comprised of up, down, left, and right. These buttons are
used to navigate through the menus and/or devices.
l. Select: Center button of navigation keys, used to confirm selections displayed
on a viewing device.
m. Menu: Displays the on-screen menu of the active device.
n. Guide: Displays the channel guide for the device’s on-screen display.
o. Info: Displays channel information for the device’s on-screen display.
p. Exit: Closes out any open menus or guides on the display or returns to the
previous menu.
5
q. Transport Buttons: These are the available buttons:
●
(Play)
●
(Skip+)
●
(Pause)
●
(Skip-)
●
(Stop)
●
(Rew)
●
(Record)
●
(FF)
r. Numerical Keypad: Numbered buttons to change channels.
6
Using Voice Control:
The TRC-1480 has the capability of using Amazon Alexa Voice Assistant to control
programmed activities, devices, and more.
For instructions on how to enable the Alexa Voice service, refer to page 11.
The TRC-1480 preserves your privacy with a push-to-talk button on the remote control.
This means the Alexa Service is only listening when you want it too.
Custom activities and devices can be controlled via Alexa; however, configuration is
required. Speak with your certified URC integrator for more details.
Issuing Voice Commands:
Voice Commands can be issued easily and intuitively with the push-to-talk button.
This button removes the need to say “Alexa…”.
Simply press-n-hold the button and say phrases such as…
● “Turn on bedroom Blu-ray”
● “Turn on living room ESPN”
● “Turn off the kitchen lights”
● And much more…
The TRC-1480 does not support the following Amazon Alexa features:
● Audio Playback via Amazon Music, Audible, or other music services.
● Alexa Drop-In, calls, or video calls
● No graphical feedback
7
Press-n-hold the microphone
button to issue a verbal
command such as “Turn on
Living Room Cable”.
Displaying the Setup Menu
The Setup Menu allows users to configure or change certain behaviors of the TRC-1480.
Enter the Setup Menu by pressing and holding the Main and Enter (see image at the
right) buttons for greater than five (5) seconds.
The Setup Menu times out after 60
seconds and returns the TRC-1480
to the system’s Main Menu.
Use the up and down navigation buttons to maneuver between the two Setup pages. To
select an option, highlight the desired setting and press the “Select” key at the center of
the navigation keys.
To return to a previous page press the left page button (at the left of Main Menu). Press
the Main or Exit button to return the remote to the Main Menu.
● Sleep Timers
● Power
● Network
● Date & Time
● Voice Assistant
● Button Beep
● Brightness
● Pickup
● System
● Software Update
● Button Light
● Factory Default
Image on display presents all the
options available on the two (2)
Settings Menu pages.
8
Sleep Timers:
Adjust the amount of time the screen remains on when the remote is not in use. The
time can be set independently based on whether the remote is using battery power
or sitting on the charging cradle.
Once the settings are adjusted, press the Save button. Pressing Cancel reverts the
remote to the last saved setting.
Leaving the remote’s display on for
long periods of time may reduce
your device’s battery life.
Network:
The following options are displayed:
● Wi-Fi Networks: Displays all stored wireless networks. This option allows
the user to connect to any network stored on the remote.
● Wireless Search: Select to connect to an available wireless network.
SSID and Password may be required.
● Network Settings: Allows the user to configure the remote’s network
properties such as IP address, Gateway, DNS, and more.
WARNING! Only use this option when instructed by URC’s Technical Support team
or your custom install professional.
Do not make changes on this screen.
Changing network settings may lead
to issues controlling the system.
9
Voice Assistant:
This Settings Menu option allows you to integrate your Total Control system with
voice assistant services such as Amazon Alexa.
Choose the supported voice assistant service (Amazon Alexa) and follow the onscreen directions.
The Alexa setup menu provides a code that must be entered into the Amazon Alexa
URL (displayed on the LCD screen of the TRC-1480).
Once enabled, use the push-to-talk button to control the Total Control system or any
other Alexa enabled device.
● Alexa Voice Volume: Adjust the
volume of the Alexa service on the
TRC-1480.
● Notification Volume: Adjust the
volume for notification alerts.
● Audio Cue: Enable or disable the
audio cue. It provides an audio
“chime” that informs the user that
the voice service is “listening”.
10
2
Enabling Alexa:
Follow these instructions to enable the Alexa Voice Assistant Service:
1. From the Settings Menu, select Voice Assistant.
1
2. Select Amazon Alexa.
3. Select Get Started.
3
11
4
4. Open a web browser and navigate to amazon.com/code.
5. Enter the code displayed on the TRC-1480.
5
12
Brightness:
Adjust the screen brightness by pressing the adjacent LCD buttons to increase or
decrease the brightness level.
Once the brightness has been adjusted, press the Save button. Pressing Cancel
reverts the remote to the last saved setting.
High brightness levels may
reduce the TRC-1480’s
battery life.
System:
Displays information about the remote’s operating system, memory, etc. Press the
More button to view further system information. Pressing the Cancel button exits
to the remote’s Setup Menu.
13
Button Light:
Adjust the brightness of the remote’s button backlighting. Press the adjacent LCD
buttons to increase or decrease the button backlighting.
Once the button back light has been adjusted, press the Save button. Pressing
Cancel reverts the remote to the last saved setting.
Brighter button light levels
may reduce the TRC-1480’s
battery life.
Power:
Displays the remote’s remaining battery level. Adjust when the “Low Battery”
warning screen appears.
Once the Power settings have been adjusted, press the Save button. Pressing
Cancel reverts the remote to the last saved setting.
14
Date & Time:
The remote’s date and time settings have been set by your certified custom
integrator. If needed, the date and time settings can be manually changed here.
If the system’s date and time are adjusted, the Total Control system adopts the new
date and time globally.
If the advanced system controller is reset, it defaults to the program’s default
location using the Internet. If Internet is not present, the date and time must be
entered manually from a URC interface such as the TRC-1480.
Once the date and time settings have been adjusted, press the Save button.
Pressing Cancel reverts the remote to the last saved setting.
Button Beep:
Adjust the button “beep” of the remote. Press the adjacent LCD buttons to increase
or decrease the volume level.
Once the sound has been adjusted, press the Save button. Pressing Cancel reverts
the remote to the last saved setting.
Higher sound levels may
reduce the TRC-1480’s
battery life.
15
Pickup:
Turn on or off the remote’s pickup sensor. When enabled, the TRC-1480 turns on
when the remote is picked up. Select Yes (turn on) or No (turn off).
Enabling the pickup sensor
may reduce the TRC-1480’s
battery life.
Software Update:
URC’s system has the ability to be programmed by a certified URC programmer
remotely (after initial installation). There may be situations where the device may
need to have the software update applied manually.
Select this option only when instructed by your certified URC integrator or URC’s
Technical Support Team.
16
Factory Default:
Resets the memory of the TRC-1480 to the factory settings. All existing
programming is erased. The device requires reconfiguration by your certified
URC integrator.
WARNING! Only use this button when instructed by URC’s Technical Support team.
17
Specifications:
Microprocessor: ARM Cortex-A35 Core 1.5GHz x 4
RAM: 8GB eMMC, DDR3 256MB RAM
LCD: 2.4” TFT-LCD, 262K Colors, Backlight By LED
Touch Window: Capacitive Touch
Sound: Mono, Normal 1 watt
Devices: Supports up to 255 devices with text, less with heavy graphics
Usage Pages: Supports up to 255 pages on each devices with text, less with heavy
graphics usage
Macro Capability: Up to 255 steps each; however, nesting is supported.
Wi-Fi: IEEE 802.11a/b/g/n/ac
RF Output Power: 2.4 GHz band - 10 dBm, 5 GHz band - 11 dBm
Frequency Range: 2412 MHz ~ 2462MHz, 5150 MHz ~ 5350 MHz, 5470 MHz ~ 5725 MHz
Battery: Lithium Polymer, 3.7V, 2100mAh, 7.77Wh
Battery Charging Time: 3 Hours
Power: 5.0V
, 2.0A
Operating Temperature: 0~40°C
Size: 9.05in x 1.97in x 1.06in
Weight (with battery loaded): 7.2oz
18
equipment and/or the URC software fails to so comply, URC shall, at its own
expense, take all reasonable measures to promptly cause such to comply.
Warranty Statement:
1. LIMITED WARRANTY AND DISCLAIMERS
Universal Remote Control, Inc. (“URC”) warrants that URC equipment
purchased directly from URC or from an authorized URC dealer or distributor
shall be free from defects in material and workmanship under normal usage
for a period of one (1) year from the date of purchase of the product by the
end-user, but no longer than thirty-six (36) months from the date of shipment
of the URC equipment by URC to an authorized URC dealer or distributor,
except that with respect to Total Control® whole-house products, the
warranty extends for two (2) years from the date of purchase by the end-user,
but no longer than forty-eight (48) months from the date of shipment of the
URC equipment by URC to an authorized URC dealer or distributor.
This limited warranty is valid only in the United States of America.
URC equipment purchased from other than an authorized URC dealer
or distributor is without warranty.
THIS LIMITED WARRANTY DOES NOT COVER TECHNICAL ASSISTANCE FOR
HARDWARE OR SOFTWARE USAGE EXCEPT AS EXPRESSLY PROVIDED FOR
HEREIN.
CERTAIN IMPLIED WARRANTIES, INCLUDING AN IMPLIED WARRANTY OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, MAY BE
AVAILABLE WITH RESPECT TO URC EQUIPMENT. IMPLIED WARRANTIES
VARY FROM STATE TO STATE. URC EXPRESSLY LIMITS THESE IMPLIED
WARRANTIES, TO THE EXTENT ALLOWABLE BY LAW, TO THE TIME PERIODS
COVERED BY THE EXPRESS WRITTEN WARRANTIES PROVIDED HEREIN.
OTHERWISE AND EXCEPT AS PROVIDED FOR HEREIN, URC EXPRESSLY
DISCLAIMS ALL WARRANTIES, EXPRESS, STATUTORY OR IMPLIED, AND
MAKES NO REPRESENTATIONS REGARDING THE USE OF, OR THE RESULTS
OF THE USE OF, THE EQUIPMENT, SOFTWARE OR DOCUMENTATION IN
TERMS OF CORRECTNESS, ACCURACY, RELIABILITY OR OTHERWISE.
URC warrants that the software will substantially conform in any material
respect to its functional specifications at the time of delivery. URC SHALL NOT
BE LIABLE FOR OPERATIONAL, TECHNICAL OR EDITORIAL ERRORS AND/OR
OMISSIONS MADE IN THE URC DOCUMENTATION. URC DOES NOT
WARRANT THAT THE URC SOFTWARE IS BUG-FREE OR ERROR FREE OR THAT
THERE ARE NO ERRORS/BUGS IN THE URC SOFTWARE.
EXCEPT AS EXPRESSLY PROVIDED FOR HEREIN, TECHNICAL SERVICES ARE
SUPPLIED “AS IS”, WITHOUT ANY WARRANTY, EXPRESS, STATUTORY OR
IMPLIED, OF ANY KIND. TO THE MAXIMUM EXTENT PERMITTED BY
APPLICABLE LAW, URC EXPRESSLY DISCLAIMS ALL WARRANTIES RELATING
TO TECHNICAL SERVICES, EXPRESS, STATUTORY OR IMPLIED, INCLUDING
BUT NOT LIMITED TO THE WARRANTIES OF QUALITY OR REASONABLE SKILL
AND CARE, OR OUTCOME OR RESULTS.
URC warrants that at the time of purchase the URC equipment and the URC
software complied with all applicable regulations and policies of the Federal
Communications Commission (“FCC”) regarding electromagnetic interference
caused by electronic/computing devices and to the extent that the URC
WITHOUT IN ANY WAY LIMITING THE GENERALITY OF THE OTHER
PROVISIONS HEREIN, THIS LIMITED WARRANTY DOES NOT COVER: (I)
DAMAGE FROM MISUSE, NEGLECT OR ACTS OF NATURE, (II)
MODIFICATIONS, (III) INTEGRATION WITH THIRD PARTY CONTENT, OR (IV)
19
BEYOND THE WARRANTY PERIOD AND/ OR FAILURE TO FOLLOW URC
WARRANTY CLAIM PROCEDURE.
The warranty limitations and warranty disclaimers may not apply to end user
in whole or in part, where such are restricted or excluded by applicable law,
and such shall apply to the maximum extent permitted by applicable law.
In the event of any warranty claim, URC will, at its sole option, repair the URC
equipment using new or comparable rebuilt parts, or exchange the URC
equipment for new or rebuilt equipment. In the event of a defect, these are the
end user’s exclusive remedies.
All the URC equipment returned for service, exchange or repair require an RGA
number. To obtain an RGA number, you must complete a Return Request Form
which you may obtain by calling (914) 835-4484 or contacting URC at
returnrequest@universalremote.com. To obtain warranty service, end user
must deliver the URC equipment, freight prepaid, in its original packaging or
packaging affording adequate protection to URC at 37 Ramland Road, Unit
104, Orangeburg, NY 10962. It is end user’s responsibility to backup any macro
programming, artwork, software or other materials that may have been
programmed into the unit. It is likely that such data, software, or other
materials will be lost during service and URC will not be responsible for any
such damage or loss. A dated purchase receipt, bill of sale, installation
contract or other verifiable proof of purchase is required. For the URC
equipment support and other important information, please visit URC’s
website available at www.universalremote.com or call the Customer Service
Center at (914) 835-4484.
This limited warranty only covers the URC equipment issues caused by defects
in material or workmanship during ordinary consumer use. It does not cover
product issues caused by any other reason, including but not limited to product
20
issues due to commercial use, acts of God, third-party installation, misuse,
limitations of technology, or modification of or to any part of the URC
equipment. This limited warranty does not cover the URC equipment sold as
used, as is, refurbished, so called “B stock” or consumables (such as
batteries). This limited warranty is invalid if the factory applied serial number
has been altered or removed from the URC equipment. This limited warranty
specifically excludes the URC equipment sold by unauthorized resellers.
With the exception of URC’s IR-only, broad-based consumer remotes, none of
URC’s PC programmable remotes or any of our Total Control® whole-house
equipment are authorized for online internet sales. Buying URC’s PC
programmable remotes or any of our Total Control® whole-house equipment
online means buying equipment that does not have URC’s limited warranty.
Such equipment is not eligible for URC tech support or software support,
either.
2. URC’s LIMITATIONS OF LIABILITY
IN NO EVENT SHALL URC BE LIABLE FOR INDIRECT, SPECIAL, INCIDENTAL,
EXEMPLARY, PUNITIVE OR CONSEQUENTIAL DAMAGES OF ANY KIND OR
LOSS OF PROFITS OR BUSINESS OPPORTUNITY, EVEN IF URC IS ADVISED OF
THE POSSIBILITY OF SUCH DAMAGES.
IN NO EVENT SHALL URC BE LIABLE FOR LOSS OF OR DAMAGE TO DATA,
COMPUTER SYSTEMS OR COMPUTER PROGRAMS.
URC’S LIABILITY, IF ANY, FOR DIRECT DAMAGES OF ANY FORM SHALL BE
LIMITED TO ACTUAL DAMAGES, NOT IN EXCESS OF AMOUNTS PAID BY END
USER FOR THE URC EQUIPMENT.
IN NO EVENT SHALL URC BE LIABLE FOR ANY EVENTS BEYOND ITS
CONTROL, INCLUDING ANY INSTANCE OF FORCE MAJEURE.
Precautions and Information Concerning Rechargeable Lithium
Polymer Battery:
IN NO EVENT SHALL URC BE LIABLE FOR THE ACTS OR OMISSIONS OF END
USER OR ANY THIRD PARTY.
● If you will not be using your remote control for an extended period of time, be
sure to remove the battery
THE LIMITATIONS OF LIABILITY MAY NOT APPLY TO END USER IN WHOLE OR
IN PART, WHERE SUCH ARE RESTRICTED LIMITED OR EXCLUDED BY
APPLICABLE LAW AND SUCH SHALL APPLY TO THE MAXIMUM EXTENT
PERMITTED BY APPLICABLE LAW.
● Do not attempt to dissemble, alter or apply heat to the battery.
URC SHALL NOT BE HELD RESPONSIBLE FOR THE STATEMENTS MADE BY
OTHERS.
● The battery should not be immersed in water.
● Use care to avoid dropping the battery or subjecting it to severe impact that
could damage the case.
● Risk of explosion if battery is replaced by an incorrect type.
SOME STATES OR JURISDICTIONS DO NOT ALLOW THE EXCLUSION OR
LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, OR ALLOW
LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS, SO THE
ABOVE LIMITATIONS OR EXCLUSIONS MAY NOT APPLY TO END USER. THIS
LIMITED WARRANTY GIVES END USER SPECIFIC LEGAL RIGHTS AND END
USER MAY HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE OR
JURISDICTION TO JURISDICTION.
End User Agreement:
The terms and conditions of the End User Agreement are available at
www.universalremote.com/eua.php shall apply.
21
● Dispose of used batteries according to the instructions.
● Lithium Polymer batteries are recyclable. For the address of a drop-off
locations near you, call toll free 1-800-822-8837 or visit http://www.rbrc.com
FCC Caution:
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
Federal Communication Commission Interference Statement:
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one more of the
following measures:
Any changes or modifications not expressly approved by the party responsible for
compliance could void the authority to operate equipment.
The antenna(s) used for this transmitter must not be co-located or operating in
conjunction with any other antenna or transmitter.
Federal Communication Commission (FCC) Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This transmitter must not be co-located or operating in
conjunction with any other antenna or transmitter. End users must follow the
specific operating instructions for satisfying RF exposure compliance.
● Reorient or relocate the receiving antenna.
● Increase the separation between the equipment and receiver.
● Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
Importer & Manufacturer:
● Consult the dealer or an experienced radio/TV technician for help.
Warning!
Changes or modifications not expressly approved by the manufacturer could void
the user’s authority to operate the equipment.
● Importer:
Universal Remote Control, Inc.
500 Mamaroneck Ave
Harrison, NY 10528
Note: The manufacturer is not responsible for any Radio or TV interference caused
by unauthorized modifications to this equipment. Such modifications could void the
user’s authority to operate the equipment.
● Manufacturer:
Summit Technology, Inc.
612, 130, Digital-ro, Geumcheon-gu, Seoul, Republic of Korea
22
Declaration of Conformity:
Company Name
:
Summit Technology, Inc
Company Address
:
130, Digital-ro, Namsung Plaza
Suite 611, Geumcheon-gu, Seoul, Korea
Contact Information
:
Phone: (+82)-2-6929-3161
Product Name
:
RF Remote Controller
Model Name
:
TRC-1480
● Radio Equipment Directive
■ EN 62368-1 (2014) + A11
(2017)
■ ETSI EN 301 489-17 V3.1.1
(2016)
■ EN 62479 (2010
■ ETSI EN 300 328 V2.1.1 (2016)
■ ETSI EN 301 489-1 V2.1.1
(2016)
● Test Report No.:
■ Radio:
■ EMC:
This product herewith complies with the requirements of Radio equipment Directive
(2014/53/EU) issued by the Commission of the European Community Compliance
with these directives implies conformity to the following European Community.
■ Health:
■ Safety
List of test reports and/or certificate verfied compliancew ith the standards above
● Radio equipment Directive
Date of Issue:
:
■ Certificate No. :
■ Certificate Body : TUV
Rhineland
Name an signature of authorized person :
General Product Manager
Summit Technology, Inc
23
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising