ZTE | ZTE-BLADE | User manual | ZTE ZTE-BLADE User manual

ZTE ZTE-BLADE User manual
MF8604 Quick Start Guide
Product Safety Information
For more information, please read the user manual stored in the
preinstalled microSD card.
Read the Safety
Information section of
this Quick Start Guide
on this page
Do not use while
Do not use hand-held
while driving
This device may
produce a bright or
flashing light
For body-worn
operation maintain a
separation of 15 mm
Do not dispose of it in a
Small parts may cause
a choking hazard
Avoid contact with
magnetic media
This device may
produce a loud sound
Avoid Extreme
Keep away from
pacemakers and other
personal medical
Avoid any contact with
liquid, keep it dry
Switch off when
instructed in hospitals
and medical facilities
Do not attempt to
Switch off when
instructed in aircrafts
and airports
Do not rely on this
device for emergency
Switch off in explosive
Only use approved
microSD logo
is a trademark of the SD Card Association.
Getting to know your phone
Power Key
● Hold to select phone modes: Silent, Vibration, Airplane, or to power
● Press to switch your phone to Sleep mode.
● Press to wake up your phone.
Home Key
● Press to return to the Home Screen from any application or screen.
● Hold to see recently used applications.
Menu Key
Press to get the options on the current screen.
Back Key
Press to go to the previous screen.
Volume Key
Press higher end of the key to turn the volume up and the lower end of
the key to turn it down.
Before getting started
Removing the back cover
Installing the SIM card
Installing the battery
Installing the memory card
Charging the battery
When you first get your new phone you’ll need to charge the battery
like this…
1. Connect the adapter to the charger jack.
2. Connect the charger to a standard AC wall outlet.
3. Disconnect the charger when the battery is fully charged.
Powering on/off your phone
1. Make sure the SIM is in your device and the battery is charged.
2. Hold Power Key to switch on your phone.
3. To switch it off, hold Power Key to get the phone options. Select
Power off, and then tap OK.
Switching to sleep mode
To save battery power, Sleep Mode suspends your device to a
low-power-consumption state while the display is off. Your device also
goes into Sleep Mode automatically when the display is automatically
turned off after a certain period of time, which you can set in Screen
timeout of the display settings.
Press Power Key to switch to Sleep Mode.
Waking up your phone
If your phone is in Sleep Mode, you can wake it up by:
1. Pressing Power Key to activate your screen display.
2. Drag the
icon to the right.
If you have set an ‘unlock pattern’ for your phone, you’ll need to draw
the pattern to unlock your screen.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF