ZTE | MF667 | User manual | ZTE MF667 User manual

ZTE MF667 User manual
your dongle
quick
start
guide
before you get started
getting started
connecting to a laptop or PC
To use the HSPA+ USB Modem,
the computer should meet the
following requirements:
■■ Remove the front cover from the HSPA+
1
You can connect your dongle by:
■■
■■
1.
2.
3.
4.
5.
6.
■■
USB connector
SIM/USIM card holder
Indicator
microSD slot
Front cover
Modem cap
■■
■■
USB-Modem.
1Connect your dongle directly into a free
■■ Insert the USIM/SIM card into the SIM
2
USB port.
card slot, according to the drawing.
omputer USB Interface compatible
C
with USB 2.0 High Speeds.
■■
3
perating System: Windows XP SP2/
O
SP3, Windows Vista SP1/SP2, Windows 7.
Replace the front cover and click it into
place.
1
Operating System: MAC OS X 10.5,
10.6 and 10.7 with latest upgrades.
our computer’s hardware system
Y
should meet or exceed the
recommended system requirements
for the installed version of OS.
2
Resolution for the display: 800 x 600
or higher.
Internet
Everywhere
MF667
3
1
2
3
4
installing your software
using your dongle
applications
To install the Internet Everywhere Software:
1If another connection software is
installed on your laptop, we recommend
that you uninstall it.
2Prior to installing the Internet Everywhere
software, please ensure your antivirus is
disabled. Insert your data card or USB
modem into your laptop. It will
automatically start the installation
process. If the installation does not
automatically start type X:autorun.exe in
the Run dialogue box, where X is the
letter denoting your inserted device (seen
by Windows as a CD drive).
3Please read the End-User Software
Licence Agreement before using the
Internet Everywhere software. If you
agree with these terms and conditions,
please click the “Accept” button and the
installation will start.
4Follow the on-screen instructions. The
installation will take about 10 minutes.
5lf the installation is successful the
following message “Internet Everywhere
has been installed” will display.
6The Internet Everywhere software will be
installed to the location Start > All
programs > Orange. A shortcut will
appear on your desktop and in your
system folder. The software will launch
automatically when USB modem or data
card is connected.
You can now launch the Internet
Everywhere application in three
ways:
When you launch your Internet Everywhere
application, it will automatically look for a
connection to a WiFi or Mobile network
depending on your application configuration
the “Accept” button and the installation will
go on.
5
■■
■■
■■
ouble-click the Internet Everywhere icon
D
on your desktop
rom start > Applications > Internet
F
Everywhere
lug your key on your laptop, the software
P
will automatically launch
When connected to a network, you can go
on Internet when launching your browser.
To access to the advanced
parameters
of the application, open the
“Parameters”
tab. This feature provides
access to statistics on
the network, network
configurations, information
about hardware in use and
customer care information.
The Internet Everywhere dashboard will
open, with the network name and signal
strength appearing after a few moments.
You will be able to go on the Internet after
having clicked on the connect button, use
text messaging (SMS), access to advanced
settings and to help.
your Internet Everywhere dashboard
Network details
3G, EDGE, GPRS
Displays the network Indicates that a 3G, EDGE,
that you are using
GPRS connection is available.
My e-care
SMA (99)
Signal strength
The more bars
showing the
stronger the
signal.
Display bar
Display the status, the
duration
of your connection
and the amount of
data transferring
during the session.
Connection
button
Press to
start or end
your current
session.
6
indicator lights
using a microSD card
While your dongle is connected
you may notice different
coloured lights appearing.
LED Indicator
Description
Red
The USB Stick
does not register
successfully or the
network service is
restricted
Your dongle also supports the use of
microSD cards with memory up to 16GB.
You can transfer photos and other files to
and from your laptop or computer by using
the dongles as you would by using any other
type of memory card.
For Windows™
Once you’ve
inserted the microSD
card into your
dongle and it is
connected to your
laptop or computer,
it will appear as
another drive in My
Computer, which
you can access by
clicking on the Start
Menu. To access it,
simply double click
on the relevant drive.
Green, blinking The USB Stick is
registering with a 2G
network
To go on the web portal to
access to your online account
and billing.
To open the SMS client
Blue, blinking
The USB Stick is
registering with a 3G
network
Green, solid
The USB Stick is
connected to a 2G
network
Blue, solid
Off
Open the User Manual
7
The USB Stick is
connected to a 3G
network
For Mac™
Once you’ve
inserted the microSD
card into your
dongle and it is
connected to your
Mac, it will appear
as another drive on
your desktop. To
access it,simply click
on the relevant drive.
Insert or remove a
microSD card as
shown.
note...
Do not remove
the microSD
whilst in use.
Removing
the card may
damage either
the card or USB
Modem or could
result in loss of
all data stored.
The USB Stick is
removed
8
9
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising