ZTE | F110 | User manual | ZTE F110 User manual

ZTE F110 User manual
ZTE-U F110
Mobile Phone
User Manual
LEGAL INFORMATION
Copyright © 2012 ZTE CORPORATION.
All rights reserved.
No part of this publication may be excerpted, reproduced, translated or
utilized in any form or by any means, electronic or mechanical, including
photocopying and microfilm, without the prior written permission of ZTE
Corporation.
The manual is published by ZTE Corporation. We reserve the right to
make modifications on print errors or update specifications without prior
notice.
Version No. : R1.0
Edition Time : 20120301
Manual No. : 079584504386
Table of Contents
SECURITY .......................................4
SAFETY PRECAUTIONS ................4
LIMITATION OF LIABILITY ...........13
KEY FUNCTIONS ..........................14
LOCKING AND UNLOCKING THE
KEYPAD.........................................16
INTERFACE ICONS .......................17
BATTERY .......................................18
INSERTING THE (U)SIM CARD ....19
INSERTING THE MEMORY CARD 21
CHARGING THE BATTERY ..........22
POWERING YOUR PHONE ON/OFF
.......................................................23
WRITING TEXT ..............................23
ADDING CONTACT TO THE
CONTACTS ....................................25
MAKING AND RECEIVING CALLS
....................................................... 26
SENDING AND RECEIVING
MESSAGES .................................. 28
SENDING AND RECEIVING EMAILS
....................................................... 32
PROFILES ..................................... 33
CALL LOG..................................... 34
SETTING YOUR PHONE............... 34
TOOLS .......................................... 39
MEDIA & ENTERTAINMENT ......... 41
FILE MANAGER ............................ 45
BLUETOOTH ................................. 45
BROWSER .................................... 47
3
Security
„ To protect your mobile phone from illegal use, take the security
measures as follows:
¾ Set PIN codes of the (U)SIM card.
¾ Set handset password.
¾ Set call restrictions.
Safety Precautions
This section includes some important information on safe and efficient
operation. Please read this information before using the phone.
Operational Precautions
„ Please use your phone properly. When making or receiving a call,
please hold your phone as holding a wireline telephone. Make sure
that the phone is at least one inch (about two point five centimeters)
from your body when transmitting.
4
„ Do not touch the antenna when the phone is in use. Touching the
antenna area affects call quality and may cause the phone to operate
at a higher power level than needed.
„ Some people may be susceptible to epileptic seizures or blackouts when
exposed to flashing lights, such as when watching television or playing
video games. If you have experienced seizures or blackouts, or if
you have a family history of such occurrences, please consult your
doctor before playing video games on your phone or enabling a flashinglight feature on your phone. (The flashing-light feature is not available
on all products.)
„ Keep the phone out of the reach of small children. The phone may
cause injury if used as a toy.
Precautions While Driving
„ Please pay attention to the traffic safety. Check the laws and regulations
on the use of your phone in the area where you drive. Always obey
them.
5
„ Use hands-free function of the phone, if available.
„ Pull off the road and park before making or answering a call if conditions
require.
Precautions for Medical Devices and Facilities
„ When using your phone near pacemakers, please always keep the
phone more than eight inches (about twenty centimeters) from the
pacemaker when the phone is switched on. Do not carry the phone in
the breast pocket. Use the ear opposite the pacemaker to minimize
the potential for interference. Switch off the phone immediately if
necessary.
„ Some phones may interfere with some hearing aids. In the event
of such interference, you may consult your hearing aids manufacturer
to discuss alternatives.
„ If you use any other personal medical device, please consult the
manufacturer of your device to determine if it is adequately shielded
from RF(radio frequency) energy.
6
„ In those facilities with special demand, such as hospital or health care
facilities, please pay attention to the restriction on the use of mobile
phone. Switch off your phone if required.
Mobile Phone
„ Please use original accessories or accessories approved by the
phone manufacturer. Using any unauthorized accessories may
affect your mobile phone’s performance, damage your phone or even
cause danger to your body and violate related local regulations about
telecom terminals.
„ Turn off your phone before you clean it. Use a damp or anti-static cloth
to clean the phone. Do not use a dry cloth or electrostatically charged
cloth. Do not use chemical or abrasive cleaners as these could damage
the phone.
„ As your mobile phone can produce electromagnetic field, do not place
it near magnetic items such as computer disks.
„ Using the phone near electrical appliances such as TV, telephone,
radio and personal computer can cause interference.
7
„ Do not expose your mobile phone to direct sunlight or store it in hot
areas. High temperatures can shorten the life of electronic devices.
„ Keep your phone dry. Any liquid may damage your phone.
„ Do not drop, knock or harshly treat the phone. Rough handling can
break internal circuit boards.
„ Do not connect the phone with any incompatible enhancement.
„ Do not attempt to disassemble the mobile phone or battery.
„ Do not store the phone with flammable or explosive articles.
„ Do not charge the mobile phone without battery.
„ Some electronic devices are susceptible to electromagnetic interference
sent by phone if inadequately shielded. Please use phone at least 20
cm or as far away as you can from TV set, radio and other automated
office equipment so as to avoid electromagnetic interference.
„ Operating phone may interfere with medical devices like hearing aides
and pacemakers, or other medical devices in hospital. Consult a
physician or the manufacturer of the medical device before using phone.
8
„ Be aware of the usage limitation when using phone at places such as
oil warehouses, or chemical factories, where there are explosive
gases or explosive products being processed, because even if your
phone is in idle state, it still transmits radio frequency (RF) energy.
Therefore, power off your phone if required.
„ Do not touch the antenna while calling. Otherwise it will affect the
quality of calling and waste battery energy. The damaged antenna
will cause slight burn while touching your skin.
„ Keep phone out of the reach of small children. Phone may cause
injury if used as a toy.
„ Do not put other things on the terminal to avoid overlaying radiator.
„ Keep the antenna free from obstructions and position the antenna
straight up. This will ensure best call quality.
Precautions for Potentially Explosive Atmospheres
„ Switch off your phone prior to entering any area with potentially explosive
atmospheres, such as fueling areas, fuel or chemical transfer or
9
storage facilities.
„ Do not remove, install, or charge batteries in such areas. Spark in a
potentially explosive atmosphere can cause an explosion or fire
resulting in bodily injury or even death.
„ To avoid possible interference with blasting operations, switch off
your phone when you are near electrical blasting caps, in a blasting
area, or in areas posted “Turn off electronic devices.” Obey all signs
and instructions.
Precautions for Electronic Devices
„ Some electronic devices are susceptible to electromagnetic interference
sent by mobile phone if inadequately shielded, such as electronic
system of vehicles. Please consult the manufacturer of the device before
using the phone if necessary.
Safety and General Use in Vehicles
„ Safety airbag, brake, speed control system and oil eject system
10
shouldn’t be affected by wireless transmission. If you do meet problems
above, please contact your automobile provider. Do not place your
phone in the area over an airbag or in the airbag deployment area.
Airbags inflate with great force. If a phone is placed in the airbag
deployment area and the airbag inflates, the phone may be propelled
with great force and cause serious injury to occupants of the vehicle.
„ Please turn off your mobile phone at a refueling point, and the same
to the place where the use of two-way radio is prohibited.
Aircraft Safety
„ Please turn off your mobile phone before the airplane takes off. In
order to protect airplane’s communication system from interference,
it is forbidden to use mobile phone in flight. Safety regulations require
you to have permission from a crew member to use your phone while
the plane is on the ground.
„ If the mobile phone has the function of automatic timing power-on,
please check your alarm setting to make sure that your phone will not
be automatically turned on during flight.
11
Battery Use
„ Do not short-circuit the battery, as this can cause the unit to overheat
or ignite.
„ Do not store battery in hot areas or throw it into fire. Otherwise, it
will cause explosion.
„ Do not disassemble or refit the battery. Otherwise, it will cause liquid
leakage, overheating, explosion and ignition of the battery.
„ Please store the battery in a cool dry place if you don’t use it for a long
period.
„ The battery can be recharged for hundreds of times, but it will eventually
wear out. When the operating time (talk time and idle time) is
noticeably shorter than normal, it is time to replace it with a new one.
„ Please stop using the charger and battery when they are damaged
or show evidence of aging.
„ Return the worn-out battery to the provider or dispose of it in accordance
with environment regulations. Do not dispose of it in household rubbish.
„ Please use original batteries or batteries approved by the phone
12
manufacturer. Using any unauthorized battery may affect your handset
performance or may cause danger of explosion, etc.
Warning: If the battery is damaged, do not discharge it. If the leakage
does come into contact with the eyes or skin, wash thoroughly in clean
water and consult a doctor.
Limitation of Liability
ZTE shall not be liable for any loss of profits or indirect, special, incidental
or consequential damages resulting from or arising out of or in connection
with using this product, whether or not ZTE had been advised, knew or
should have known the possibility of such damages. The user should
refer to the enclosed warranty card for full warranty and service information.
Note: The pictures and icons shown in the manual are just schematic
drawings for function demonstration. If they are inconsistent with your
handset, please take your handset as the standard. If the inconsistency
exits in the manual because of the handset function updating, please
refer to the follow-up public information from ZTE CORPORATION.
13
Key Functions
Headset interface
Earpiece
USB/Charger interface
4-Way Navigation
keys and Center key
Left soft key
Right soft key
Send key
Back key
End/Power key
C key
Alpha numeric keys
* key
# key
14
Function
Description
Left soft key
Performs the function indicated at the left bottom of the screen.
Right soft key
Performs the function indicated at the right bottom of the screen.
Center key
Press to confirm actions and make selections.
4-Way
Navigation keys
These keys (UP, DOWN, LEFT and RIGHT) allow for navigation
through menu options and quick accessing to some function
menus.
Send key
Press to dial a phone number or answer a call, or view the call
history in the standby mode.
End/Power key
Press to exit to the idle mode.
Hold to switch on/off the phone.
Alpha numeric keys
Press to enter characters 0-9, the alphabets from a-z.
Back key
Press this key to return to the last interface you visited.
C key
Use this key to delete the input.
15
Note: In this User Manual, “press a key” means to press the key and
release it immediately, while “hold a key” means to press the key for
at least two seconds and then release it.
Locking and Unlocking the Keypad
In the standby mode, press the Left soft key and then press the *
key within two seconds to lock the keypad. The unlock method is the
same.
Locking the keypad can prevent unintentional operations on it. You
can answer an incoming call with the regular operation when the
keypad is locked.
16
Interface icons
Indicator
What it means
Indicator
What it means
Signal strength
New SMS,
message box full
when blinking
Connect to internet
Keypad locked
Silent
Battery status
General
New MMS
Outdoor
Missed call
Meeting
Alarm clock set
17
Battery
The lithium ion battery of the mobile phone can be immediately used
after unpacking.
Installing the Battery
1. Remove the battery cover.
2. Insert the battery by aligning the gold-colored contacts with the
contacts in the battery slot.
3. Push down the upper section of the battery until it clicks into place.
4. Replace the battery cover and close it gently until you hear a click.
Remove the battery cover Push down the battery
18
Replace the battery cover
Removing the Battery
1. Make sure that your mobile phone is switched off.
2. Remove the battery cover.
3. Pull the battery up and remove it from the mobile phone.
Remove the battery cover
Pull up the battery
Inserting the (U)SIM card
Insert the (U)SIM card as follows:
1. Make sure that the phone is switched off and the charger is
disconnected from the phone.
19
2. Turn the phone over and remove the battery cover.
3. Remove the battery if it is already installed.
4. Hold your (U)SIM card with the cut corner oriented as shown and then
slide it into the card holder with the metal contacts facing downwards.
5. Replace the battery first.
6. Replace the battery cover.
Insert the (U)SIM card
(U)SIM card (Subscriber Identity Module) is a micro-chip that holds
your personal information such as names and phone numbers. Your
phone won’t work without it. If you already have contacts on your
(U)SIM card, they can be transferred in most cases.
20
Inserting the Memory Card
You can use a memory card to expand the storage of the phone. You
can store or copy files such as photos, music and so on.
Do not take out the card or switch off the phone while transmitting or
storing data, which may cause data loss or damage to the phone or the
card.
Insert the memory card as follows:
Open the battery cover. Insert the card with the metal contacts facing
downwards until it clicks to the right position.
Insert the Memory card
21
Charging the battery
Your phone is powered by a rechargeable battery. For maximum battery
performance, it is recommended that you first use up the battery power
and then charge it completely. A new battery’s full performance is achieved
only after three complete charge and discharge cycles.
1. Connect your travel adapter to the right side of your mobile phone as
shown in the diagram.
2. Connect the other end of the travel adapter to the mains socket.
3. When the battery is being charged, the display will show the animation
of a battery being filled up.
4. When the battery is fully charged, disconnect the charger.
22
Powering your phone on/off
Make sure that your (U)SIM card is in your mobile phone and that the
battery is charged.
Hold the End/Power key to power on/off the phone. The phone will
automatically search for the network.
Writing Text
„
„
„
Change input mode: Press the # key to change the input mode
(input modes: eZi ABC, eZi abc, ABC, abc, eZi RU, eZi ru, RU, ru,
123).
Input letters: In ABC/abc/RU/ru mode, constantly press the
corresponding letter key till the letter appears. In eZi ABC/eZi abc/eZi
RU/eZi ru mode, press the corresponding letter key, then use
Left/Right Navigation keys to choose the letter you want. Press
Left soft key, Center key to confirm it.
Input words: In eZi ABC/eZi abc/eZi RU/eZi ru mode, input any letter
23
„
„
„
with a single press. Press each key only once for every letter. The
word changes after each button stroke. Predictive text input is based
on a built-in dictionary. When you have finished writing the word and
it is correct, confirm it by pressing the Left soft key, Center key. If the
word is incorrect, press the Left/Right Navigation keys to view
other matching words found in the dictionary.
Input digits: In 123 mode, press the digit key once to input a digit. In
eZi ABC/eZi abc/eZi RU/eZi ru mode, press the digit key, and select
the number by Left/Right Navigation keys. You cannot input 0 in
eZi ABC/eZi abc/eZi RU/eZi ru mode. In ABC/abc/RU/ru mode,
constantly press the digit key until the number appears.
Input symbol: Press the * key to enter the symbol mode. In symbol
mode select the required symbol by Navigation keys. In eZi
ABC/eZi abc/eZi RU/eZi ru mode, press the 1 key, and select the
required symbol (common symbols) by Navigation keys. In
ABC/abc/RU/ru mode, constantly press the 1 key until the symbol
appears.
Input space: Press the 0 key to input space. It does not work in 123
24
„
„
mode.
Delete character: Press the C key to clear a character. Hold the C key
to delete all characters and clear the display.
Move cursor to left or right: Among the text, press the Left/Right
navigation keys to move the cursor to left or right.
Adding contact to the Contacts
There are some numbers that you may want to call again and again, so
it makes sense to add these numbers to your contacts. You can then
access these numbers quickly and easily.
1. Go to Menu→Contacts→Options→Settings&Status→Preferred
storage to choose the storage position for the contact.
Note: If you select SIM/Phone in Preferred storage, the Contacts list will
only display the corresponding contact information which you select. For
example, if you select SIM, the phone will only display the contacts list in
the SIM card.
2. Go to Menu→Contacts→ Add new contact to add new contact.
25
3. Edit the information and save it.
You can also save a number right after you’ve made or received a
phone call or a message from someone who is not yet in your
Contacts list.
To delete someone from your Contacts list, first select the name, then
select Options→Delete.
Making and Receiving Calls
„
„
„
Basic way to make a call
In idle screen, press the numeric keys to input the number and press
the Send key to dial.
Dial from the Contacts
Go to Menu→Contacts. Find the name of the person you want to
call, and press the Send key.
Make an emergency call
You can make emergency calls without the (U)SIM card inserted so
26
long as you are in an area with network coverage.
Note: Maybe sometimes you must insert the (U)SIM card to dial
the emergency call, you should consult your network provider for
details.
„ Answer a call
Press the Send key.
„ End a call or reject a call
Press the End/Power key.
Make sure that you are in an area with sufficient coverage to make calls.
The strength of the network signal is indicated on the Status Bar of the
screen.
27
Sending and Receiving Messages
„ Write a new message
You can use your mobile phone to send and receive messages.
1. Go to Menu→Messaging→New message.
2. Write your message. For more information on input method, see
section ‘Writing Text’. The default message type is SMS.
3. If you want to change to MMS, you can press Options and choose
Switch to MMS; or you can press Options and choose Add
picture, Add sound, Add video or Add subject to directly insert
multimedia contents to the message and it will be switched to MMS
automatically.
4. You can select Options→Slide options to add a new slide. And
you can select Options→Advanced to insert a text template,
attachment, contact number, contact name or bookmark.
5. When you finish writing, press Options→Send to to enter
recipient or add from Contacts. If you are writing an MMS, after
28
adding recipients, then you can select Options→Change to Cc or
Change to Bcc to change the current contact to Cc or Bcc.
6. Select Options→Send to send the message out. If you want to
save the MMS as a draft, select Options→Save to Drafts. If you
are writing a SMS, select Options→Save.
„ View messages
Upon receiving a message, the mobile phone will alert you with a ringtone,
prompt, or a new message icon.
1. Press View to open the message. You can also go to Inbox to
read the message.
2. While the message is open, press Options to reply, delete or
forward the message. You can also call back the sender or
save the sender’s number. Select Save to Cantacts to save the
sender’s number.
Note: While the message is open, select Options→Advanced→Use
number to save the number which included in the message content.
You can view the message boxes in the Messaging interface.
29
♦
♦
♦
Select Inbox to view received messages.
Select Drafts to view unsent messages.
Select Outbox to view unsuccessfully sent and saved
messages.
♦ Select Sent messages to view successfully sent and saved
messages.
♦ Select My folder to view archive messages.
♦ Select Voicemail to call voicemail or edit voicemail.
♦ Select Templates to view message templates.
♦ Select Broadcast message to view broadcast messages.
„ Message settings
Go to Menu→Messaging→Message settings→Text message.
♦ Profile settings: This is automatically set by the service
provider, but please contact us if this is not available.
♦ Common settings: You can set Delivery report and Reply path
on or off. You can select to Save sent message or not.
30
♦
♦
♦
Memory status: View the SIM or Phone memory status.
Preferred storage: Set the preferred storage to SIM or Phone.
Preferred connection: You can select Prefer GPRS, Prefer
GSM, GSM only.
Go to Menu→Messaging→Message settings→Multimedia message.
♦ Profiles: You can activate preset MMS profiles or add new
ones.
♦ Common settings: In Compose, you can set Slide time,
Creation mode, Picture resizing, Auto signature and Signature.
In Sending, you can set Validity period, Delivery report, Read
report, Priority, Send and save. In Retrieval, you can set
Home network, Roaming, Filters, Read report and Delivery
report. In Memory status, you can view memory status.
31
Sending and Receiving Emails
y Set up accounts
First you have to setup your email accounts. If the account is not
properly set or activated, you cannot send or receive any email.
Go to Menu→Messaging→Email→Email accounts.
1. Select Options, and then select New account.
2. Enter your Email address, protocol, data account and server
information, etc.
3. Activate your email account.
y Send an email
Go to Menu→Messaging→Email→Write Email to edit your email.
When you finish writing, select to send or save the email.
y Send and receive emails
If you want to receive emails, go to Menu→Messaging→Email.
Select Send and receive, and the emails in your mailbox will be
32
downloaded to your phone and the emails in the Outbox will be sent
out. Go to Inbox to view your received emails.
Profiles
Go to Menu→Profiles. You can select your preferred profile in this
menu. The profile options are: General, Meeting, Outdoor, Silent,
Headset and Bluetooth. The default settings for each individual profile
are preset at the factory. You can change them in the
Options→Customize menu.
¾ Tone settings: Set the tone for various conditions.
¾ Volume: Set the Ringtone and Key tone.
¾ Alert type: Choose among four modes based on ring and vibration.
¾ Ring type: Choose among Single, Repeat and Ascending.
¾ Extra tone: Let the phone alert when Warning, Error, Camp on or
Connect.
¾ Answer mode: Select Any key to answer a call.
33
Note: The Headset mode can only be activated with the headset
connected. And the Bluetooth mode can only be activated when the
Bluetooth headset is connected.
Call log
Go to Menu→Call log.
All calls, Dialled calls, Received calls and Missed calls are saved in
Call log. If the records are full, the earliest saved records will be
deleted automatically. Also, you can view Call timers, GPRS counter in
Call log.
Setting your phone
You can adjust various settings of your phone. Go to Menu→Settings.
y Phone settings
♦ Time and date: You can set time zone, format, etc.
♦ Schedule power on/off: Set auto power on and off time.
♦ Language: You can select the language.
34
♦
♦
Pref.input methods: You can set the preferred input method.
Auto keypad lock: Select a time for auto keypad lock. If the
phone is not operated within this time in the standby mode, the
phone will automatically lock the keypad to prevent unintended
touch.
♦ Shortcuts: You can add different functions to Shortcuts.
♦ Dedicated key: You can set Navigation keys refer to some certain
functions, and when you press Navigation keys in the standby
mode, you can directly and quickly get access to these functions.
♦ Flight mode: You can select to use flight mode. In flight mode,
all wireless functions are disabled.
y Display settings
In this menu, you can set Wallpaper, LCD backlight, etc.
y Call settings
♦ Caller ID: You can select to Set by network, Hide ID or Send
ID.
35
♦
♦
♦
♦
♦
♦
Call waiting: After this function is activated, the system will inform you
if there is another incoming call. Please contact your network provider
for details.
Call divert: The call divert service enables you to divert an
incoming call from a service to a specified telephone number in
preset conditions. You can contact the network provider to
activate this service. You can set the call divert service so that
voice calls and data calls are diverted to a preset number under
different conditions. Please contact your network provider for details.
This function need network support.
Call barring: You can bar outgoing and incoming calls.This
function need network support.
Line switching: Switch the call line.
Closed user group: You can create groups and numbers in one
group can call each other, but can not call numbers in other
groups.
Advance settings: You can set Blacklist, Auto redial, IP dial,
36
Call time display, Call time reminder, Auto quick end, etc.
y Network settings
Set to automatically or manually select network, and set the preferred
networks. Set GPRS connection mode. In Service selection, you can
select GSM/GPRS, WCDMA or Automatic.
y Security settings
♦ Phone lock: Phone lock can prevent your mobile phone from
unauthorized use. Select On/Off to enable or disable the handset
lock protection. (When you turn on or off the phone lock function,
the phone will ask you to input the phone password. The default
phone password is 1122.)
Note: You may be required to input the phone password in some of the
security setting interfaces. The default phone password is 1122.
♦ SIM lock: If SIM lock is currently set Off, select On, then input a
PIN code to turn it on. You need to input the correct PIN code to
unlock your SIM card when you turn on your mobile phone next
time.
37
Note: The PUK code is required to unlock the SIM card if you have
incorrectly input the PIN code for three consecutive times. The PIN code
and the PUK code may be supplied along with the SIM card. If not,
contact the network provider.
♦ Fixed dialing: If your SIM card supports this function and this
function is enabled, the phone can only dial those numbers
starting with the fixed dial number you set. For example, if you set
the fixed dial number to 139, then the phone can only dial numbers
starting with 139.
Note: You will be required to input the PIN2 code when you enable the
Fixed dialing function. The PIN2 code may be supplied along with the
(U)SIM card. If not, contact the network provider.
♦ Change password: You can change the PIN, PIN2 and Phone
password here.
y Connectivity
♦ Bluetooth: See chapter “Bluetooth”.
♦ Data account: You can add and view your GSM data and
38
GPRS usage.
y Restore factory settings
You need to input the correct phone password, and press OK to
restore factory settings.
Tools
Go to Menu→Tools.
y Calendar
Enter Calendar, the calendar of the current month will be displayed on
the screen and the current date will be marked by a background box in
a special colour.
You can choose a certain day, view the events of that day. You can
also add events to a certain day.
y Alarm
You can view, and edit the alarm clock settings. You can also
enable or disable the alarms. By taping Edit, you can set the
39
corresponding features of the alarm according to instructions.
Tasks
You can add tasks in menu.
y World clock
You can view the time in different cities.
y Stopwatch
Use it to record the time.
y Calculator
You can perform simple calculations. Press digit key to enter the
number. Press Navigation keys to select the operational
character. Press Left soft key or Center key to get the result.
Note: This calculator has limited accuracy and rounding errors may
occur especially in long division.
y Currency converter
Your mobile phone provides you with basic functions of currency
conversion. Input the Rate, select OK and input a figure in the Local
y
40
field, then press OK to get the result.
Ebook reader
Read the ebooks stored in the ..\Ebook folder which in the phone or
Memory card. Select Options to set the bookshelf.
y SIM application
SIM application services are value-added services provided by your
network provider.
Your mobile phone supports SIM application service, but if your SIM
card and network provider do not support the service, these functions
can’t be used.
y
Media & Entertainment
Go to Menu→Media & Entertainment.
y Camera
¾ Aim the camera at the object and then press the Center key to
take the shot. Before capturing a photo, adjust brightness.
41
Press the Left soft key to config your camera settings.
¾ Press Left soft key in camera interface, select Switch to→Video
recorder, then press Center key to start the video recorder.
When you are recording the video, press Left soft key to pause/resume
the video recorder. Press Right soft key to save the video and exit the
video function.
z Image viewer
The images you want to view in Image viewer must be put in ..
\Photos folder in the phone or memory card, and in
Options→Storage, the storage must be set to phone or memory
card correspondingly.
You can select an image and view it.
Image viewer supports: jpg, bmp, gif, png.
z Media player
The videos you want to play in Media player must be put in ..\Videos
folder in the phone or memory card, and in Options→Storage, the
storage must be set to phone or memory card correspondingly.
42
You can select a video and play it.
The Media player supports: H.263 baseline, Mpeg4, 3GP.
z Audio player
You can play the audio files in your phone or memory card.
The music you want to play in Audio player must be put in ..\ My Music
folder in the phone or memory card, and in
List→Options→Settings→Player settings→Pre. playlist, the storage
must be set to phone or memory card correspondingly.
In List→Options, you can refresh your playlist, set storage, or make
personal settings.
z Voice Recorder
Go to Options→New record to record a sound clip.
Go to Options→List to view the sound clips you recorded.
Go to Options→Settings to set preferred storage, file format.
z FM radio
With the radio, you can search for radio channels, listen to them, and
43
save them on your device. Note that the quality of the radio broadcast
depends on the coverage of the radio station in that particular area. The
wired headset works as an antenna, so always connect the headset
when using the radio. In the FM radio interface, you can press the
Up/Down Navigation keys to adjust volume, press the Left/Right
Navigation keys to tune the frequency, and press the Center key to
pause. Select Options to enter the submenu. When you receive an
incoming call while listening to the radio, the radio will be paused.
z Games
Your mobile phone has classic games. Select a game and start it, you can
view Help to see the rules of the game.
z Java
MIDlets are Java™-based applications that can run on your phones. It
supports Java 2 Edition, J2ME™. Java allows you to download Javabased applications, such as games and tools that are specifically
designed for mobile phones. Java gives you the flexibility of installing and
managing additional J2ME applications from the Internet.
44
File manager
Go to Menu→File manager. You can check all the folders in the phone
or memory card, create new ones or rename, delete, or sort, etc. The
files you download from the internet will be stored in these folders.
Note: When you select Format, the data will be lost, so please be careful
with this function.
Bluetooth
Go to Menu→Settings→Connectivity→Bluetooth. The Bluetooth
devices must be paired before the communication is performed.
z Turn on or off the Bluetooth on your phone
Go to Power, you can turn on or off Bluetooth.
z Make your phone visible
Go to Bluetooth→Visibility, you can choose to be visible or not.
When your phone is visible, and the Bluetooth is turned on, all other
45
Bluetooth-enabled devices within range can detect your phone.
z Create a Bluetooth partnership
1. Go to Bluetooth→My device→Search new device to search
other Bluetooth-enabled devices and list them.
2. Select the desired device name in the list and press Pair.
3. Enter a passcode (1 up to 16 characters), and then press OK.
When the opposite party enters the same passcode and you select
Yes, the connection will be established. Sometimes the devices
can be paired automatically without entering password.
z Beam information using Bluetooth
After the Bluetooth partnership is established, you can beam
information, such as contacts, and calendar items, as well as files
from your phone to another Bluetooth-enabled device.
For example, if you want to send an item from the Contacts list to the
opposite party, find that item, press Options→Send Namecard→Via
Bluetooth, and then select the device name. If you want to send a
multimedia file, find the file from the media folder and then press
46
Options→Send→Via Bluetooth, and then select the device name.
z Connect a Bluetooth hands-free or stereo headset
For hands-free phone conversations or to listen to music, you can use a
Bluetooth hands-free or stereo headset.
Go to Bluetooth→Search audio device to search for the Bluetooth
hands-free or stereo headset.
Browser
Go to Menu→Browser.
Browser allows you to view internet content.
♦ Homepage: Homepage is a website you set in
Browser→Settings→Profiles.
♦ Bookmarks: Access your phone’s preset websites. Select a
bookmark and press Options→Go to to load the website or you
can select Edit, Send, Delete, Delete all or Add bookmark.
♦ History: Display the pages you’ve visited recently. Select an item
47
♦
♦
♦
♦
and choose Options→Go to to visit the page again.
Saved page: You can save you favorite website pages in it.
Input address: Input a URL and press Options→Done to visit the
website.
Push message: In Push message you can receive messages
which include website addresses. You can visit these websites
directly from the opened message.
Settings: You can set Profiles, Browser options, Service
message settings, Clear cache, Clear cookies and Trusted
certificates.
48
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising