ZTE | N790 | User manual | ZTE N790 User manual

ZTE N790 User manual
Product Safety Information
Switch off when instructed in aircrafts and airports
Do not use while re-fuelling
Do not rely on this device for emergency communications
Do not use hand-held while driving
Switch off in explosive environments
This device may produce a bright
or flashing light
ZTE N790
Quick Start Guide
For body-worn operation maintain
a separation of 15 mm
Do not dispose of it in a fire
Small parts may cause a choking
hazard
Avoid contact with magnetic media
This device may produce a loud
sound
Avoid Extreme Temperatures
Keep away from pacemakers and
other personal medical devices
Avoid any contact with liquid, keep
it dry
Switch off when instructed in hospitals and medical facilities
Do not attempt to disassemble
1
2
Only use approved accessories
Notes:
microSD logo
is a trademark of the SD
Card Association.
"The number you dialed is unreachable."
or "The number you dialed is out of service
area".
The above situation is caused by the phone
design and has nothing to do with the network
of your operator. This design can significantly
reduce power consumption and improve your
phone's standby time. In case of missing
important phone calls, please contact your
operator to enable services like missed call
alerts.
Getting to Know Your Phone
Power Key
Headset Jack
Notice
We offer self-service for our smart terminal
device users. Please visit ZTE official website
(at www.zte.com.cn) for more information on
self-service and supported product models.
This product is designed to support two SIM
cards. You can install two SIM cards simultaneously and have them both in standby.
However, both SIM cards cannot be used
at the same time for phone service or data
service. When you're in a phone call using
one SIM card, the other one will be unreachable through phone call. Callers to that card's
number may hear voice prompts such as
3
Earpiece
Touch
Screen
Home Key
Back Key
Menu Key
Search Key
Charger/
USB Jack
4
Speaker
Camera
Volume
Key
Volume Key
Press higher end of the key to turn the volume up and the lower end of the key to turn it
down.
Before Getting Started
1. Removing the back cover
4. Installing the memory card
Powering On/Off Your Phone
Calls
1. Make sure the SIM is in your device and
the battery is charged.
2. Hold Power Key to switch on your phone.
3. To switch it off, hold Power Key to get
the phone options. Select Power off, and
Making Calls
then tap OK.
Switching to Sleep Mode
Power Key
● Hold to select phone modes: Silent, Airplane, or to power off.
● Press to switch your phone to Sleep
mode.
● Press to wake up your phone.
Home Key
● Press to return to the Home Screen from
any application or screen.
● Hold to see recently used applications.
Menu Key
Press to get the options on the current
screen.
Back Key
Press to go to the previous screen.
Search Key
Press to start the Search application.
5
To save battery power, Sleep Mode suspends
your device to a low-power-consumption state
while the display is off. Your device also goes
into Sleep Mode automatically when the display is automatically turned off after a certain
period of time, which you can set in Screen
timeout of the display settings.
Press Power Key to switch to Sleep Mode.
2. Installing the SIM cards
UIM slot 1 (CDMA)
SIM slot 2 (GSM)
Charging the battery
Waking Up Your Phone
Caution: Install your CDMA card into UIM
slot 1. Install your 2G SIM card into GSM slot
2. UIM slot 1 is the main slot, SIM slot 2 is the
auxiliary slot.
3. Installing the battery
6
When you first get your new phone you’ll
need to charge the battery like this…
1. Connect the adapter to the charger jack.
2. Connect the charger to a standard AC
wall outlet.
3. Disconnect the charger when the battery
is fully charged.
7
If your phone is in Sleep Mode, you can wake
it up by…
1. Pressing Power Key to activate your
screen display.
2. Press and hold
to unlock the screen.
Notes: If you have set an ‘unlock pattern’, or
a PIN/password for your phone, you’ll need to
draw the pattern or enter the PIN/password to
unlock your screen.
8
1. Touch the Home Key >
.
2. Enter the phone number with the onscreen keypad. Touch
to delete wrong
digits.
3. Touch CDMA Call or GSM Call.
Answering or Declining Calls
●
Drag the green phone icon
to the
right.
●
Drag
to the left to decline a call.
Call forwarding
You can set your phone to forward incoming
phone calls to another number. You can set
this feature separately for several conditions
when you are not able to answer calls, such
as when you are already on the phone or
when you are outside of the service area.
1. Touch the Menu Key > Settings > Call
settings > UIM Settings / SIM Settings
> Call forwarding.
2. Select a condition.
3. Enter a number to which calls will be forwarded and select Enable. Your setting
will be sent to the network.
9
Call waiting
Call waiting gives you the option to take an
incoming call when you’re already on the
phone. This function is available only for
voice calls.
● CDMA Call waiting
1. Touch the Menu Key > Settings > Call
settings > UIM Settings > Call waitings.
2. Select Enable, and then touch Enable to
confirm. Your setting will be sent to the
network.
● GSM Call Waiting
1. Touch the Menu Key > Settings > Call
settings > SIM Settings > Additional
settings.
2. Tick the checkbox at the right of the Call
waiting to enable call waiting. Your setting will be sent to the network.
4. Enter the contact name and other information, such as phone numbers and
emails.
Touch a category’s plus button
to add
more than one entry for that category—
for example, to add both work and home
numbers. Touch the button at the left of
the entry to select labels, such as Mobile
or Work for a phone number, or select
Custom to create your own label.
5. Touch the picture frame icon
to assign
a picture to the contact.
6. When you’re finished, touch
.
Importing Contacts From the CDMA/
GSM Card
Adding a New Contact
1. Open your contacts.
1. Touch the Home Key >
2. Touch
2. Touch the Menu Key > Import/Export >
Import from CDMA/GSM card.
3. Touch all the SIM contacts you want to
at the bottom on the screen.
3. If you have more than one account for
contacts, touch Contact type and select
the account to which you want to add the
contact.
10
import and then touch
11
Connect to Wi-Fi network
1. From the home screen, touch Menu Key
> Settings > Wireless & networks.
2. If Wi-Fi is not enabled, tick the checkbox
at the right of the Wi-Fi to turn on Wi-Fi.
The phone scans for available Wi-Fi networks and displays the names of those it
finds.
3. Touch a network name to connect to it.
You may need to enter a passeord.
Enable mobile data access
Contacts saved on the phone can have more
information than just a name and a phone
number, such as Email, contact icon, and
address. If you’ve got contacts saved on the
SIM card, you can import them to the phone.
Contacts
Connect to networks
.
.
1. Touch the Home Key > Menu Key > Settings > Wireless & networks > Mobile
networks.
2. Check Data enabled to enable data access over the mobile network.
Disable mobile data access
1. Touch the Home Key > Menu Key > Settings > Wireless & networks > Mobile
networks.
2. Uncheck Data enabled to disable data
access over the mobile network.
Use your phone as a hotspot
2. Check Portable Wi-Fi hotspot. After a
moment, the phone starts broadcasting its
Wi-Fi network name (SSID), so you can
connect to it with up to 5 computers or
other devices.
3. Touch Portable Wi-Fi hotspot settings
dress or enter a new one. Separate multiple addresses with commas.
3. Press the Menu Key and touch Add
Cc/Bcc to address a copy or blind copy of
the message.
4. Enter a subject for the message.
> Configure Wi-Fi hotspot if you want to
change the Wi-Fi network name or secure
it with a password.
NOTE:
Uncheck Portable Wi-Fi hotspot to stop
sharing your data connection via Wi-Fi.
5. Enter the text to the message.
6. Press the Menu Key and touch Add attachment to send files with the message.
7. Touch Send.
Email
Camera and video
Take a picture
1. From the home screen, touch
Email setup
1. From the home screen, touch
> Email.
NOTE:
If another email account is already set up,
touch the Menu Key > Account settings
> ADD ACCOUNT.
2. Enter the email address and password.
3. Touch Next and follow the onscreen instructions.
Create and send an email message
1. Press the Home Key > Menu Key, and
touch Settings > Wireless & networks >
Tethering & portable hotspot.
1. Press the Menu Key and touch Compose.
2. Address the message. As you enter text,
matching addresses are offered from your
Contacts. You can touch a suggested ad-
12
13
>cam-
era.
2. Aim the camera at the subject and then
touch
to take the shot.
2. Touch an album and then touch and hold
a picture.
3. Touch Share and select a methord from
the list.
Playing Music
You can play digital audio files from your
phone’s memory card in Music.
1. Touch the Home Key >
Take a video
1. From the home screen, touch
corder, or Drag
> cam-
to begin recording, touch
to
Send a picture
14
Song and artist information.
Drag the slider to jump to any part of
the song.
Tap to play the previous / rewind
song.
Tap to add the current song to favorite.
Tap to open the current playlist.
Tap to pause or resume the track.
Tap to play the next song.
You can move the applications downloaded
or installed on your phone to the microSD
card when the phone memory is full. You can
also move applications to your phone if the
microSD card is getting full.
NOTE: Not all applications can be move to
your phone or microSD card.
stop.
1. From the home screen, touch
Touch to toggle repeat mode: no
repeat, repeat the current song, or
repeat the current playlist.
Moving an Application
to the camcorder
position in the camera interface.
2. Touch
> Music
to open the Music Screen.
2. Select Artists/Albums/Songs/Playlists
/favorite to find the songs you want to
play.
3. Touch an item from the list to start playing.
NOTE: You can adjust the volume with the
Volume Keys.
Touch to play the current playlist in
shuffle mode, where tracks are played
in random order.
> Gallery.
15
16
•
•
•
Touch the Home Key >
> Settings >
Applications > Manage applications.
Touch the application you want to move
below the Downloaded tab.
Touch Move to phone or Move to SD card.
Extending Battery Life
There are several things you can do to make
your battery last longer.
• Turn on Wi-Fi, Bluetooth, GPS, mobile
data, auto-sync only when you need to.
• Lower the screen brightness.
• Use Bluetooth tethering or USB tethering
(when you have a cable) instead of portable Wi-Fi hotspot to share your phone’s
data service.
•
From the home screen, touch
> Task
Manager and close the apps you do not
need but still run in the background.
•
From the home screen, touch
> Set-
tings > Sound and uncheck all Feedback.
17
Specific Absorption Rate (SAR)
Your mobile device is a radio transmitter and
receiver. It is designed not to exceed the limits for exposure to radio waves recommended
by international guidelines. These guidelines
were developed by the independent scientific
organization ICNIRP and include safety margins designed to assure the protection of all
persons, regardless of age and health.
The guidelines use a unit of measurement
known as Specific Absorption Rate, or SAR.
The SAR limit for mobile devices is 2 W/kg
and the highest SAR value for this device
when tested was 0.356 W/kg. As mobile devices offer a range of functions, they can be
used in other positions, such as on the body.
As SAR is measured utilizing the device’s
highest transmitting power, the actual SAR of
this device while operating is typically below
that indicated above. This is due to automatic
changes to the power level of the device to
ensure it only uses the minimum power required to communicate with the network.
18
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising