ZTE | BLADE L2 | User manual | ZTE BLADE L2 User manual

ZTE BLADE L2 User manual
LEGAL INFORMATION
Copyright © 2013 ZTE
CORPORATION.
All rights reserved.
ZTE Blade L2
WCDMA/GSM
Mobile Phone
Quick Start Guide
No part of this publication may be
quoted, reproduced, translated or
used in any form or by any means,
electronic or mechanical, including
photocopying and microfilm, without
the prior written permission of ZTE
Corporation.
ZTE Corporation reserves the right to
make modifications on print errors or
update specifications in this guide
without prior notice.
Version No.: R1.0
Edition Time: 2014.02.18
We offer self-service for our smart
terminal device users. Please visit ZTE
official website (at
www.ztedevices.com) for more
information on self-service and
supported product models.
Information subject to the website.
For more information, visit
www.ztedevices.com and download
the user manual.
1
2. Inserting the SIM card.
1. Connect the adapter to the charger
jack.
Product Safety
Information
Do not use while re-fuelling.
Switch off when instructed in
hospitals and medical facilities.
Do not use hand-held while
driving.
Do not attempt to disassemble.
This device may produce a
bright or flashing light.
For body-worn operation
maintain a separation of 15 mm.
Charging the battery
When you first get your new phone
you’ll need to charge the battery like
this:
7
Small parts may cause a choking
hazard.
Only use approved accessories.
Front camera
Headset Jack
Back Key
Press to go to the previous screen.
Volume Key
Charger/USB Jack
Avoid Extreme Temperatures.
Waking Up Your Phone
Your phone automatically goes into
sleep mode when it is not in use for
some time. The display is turned off to
save power and the keys are locked to
prevent accidental operations.
You can wake up phone by turning on
the display and unlocking the keys.
1. Press the Power Key to turn the
screen on.
9
Back Cover
Volume Down
Volume Up
3
2. Touch and hold
the screen.
at the center of
EC Declaration of
Conformity
It is hereby declared that following
designated product:
Product Type: WCDMA/GSM(GPRS)
Dual-Mode Digital Mobile Phone
ZTE Blade L2
Product Description: WCDMA/GSM
(GPRS) Dual-Mode Digital Mobile
Phone
Complies with the essential protection
requirements of Directives on Radio
and Telecommunication Terminal
Equipment (Directive 1999/5/EC),
Restriction of the Certain Hazardous
Substances in electrical and electronic
10
● Press and hold to turn on your
phone.
● Press and hold to reset the phone,
turn on or off Silent or or vibrate or
flight mode, or to power off or
Reboot Device
● Press to switch your phone to Sleep
mode.
● Press to wake up your phone.
4
Notes:
If you have set an ‘unlock pattern’, or a
PIN/password for your phone, you’ll
need to draw the pattern or enter the
PIN/password to unlock your screen.
Model No:
Touch Screen
Health
and
safety
Standard
EN503321-2000
EN503322-2003
Report No.
11
ECIT-2012
-0103
-Safety
3125677.50A
ECIT-2012
-0103-SAR
6
EN62209
-1:2006,
EN50360:2001
EN 62311-2008
EN 62479:2010
EMC
EN 301 489-1
V1.9.2:2011
EN 301 489-3
V1.4.1:2002
EN 301 489-7
V1.3.1: 2005
EN 301
489-17V2.1.1:
2009
EN 301
489-24V1.5.1:
2010
ECIT-2012
-0103-EMC
Radio
Spec
trum
EN 300 440-1
V1.6.1
EN 300 440-2
V1.4.1
EN 301 511
V9.0.2 :
(2003-03)
EN 301 908-1/-2
V5.2.1
EN 300
328V1.7.1:2006
ECIT-2012
-0103-GPS
ECIT-0103
-RF-G
ECIT-0103
-RF-W
ECIT-2012
-0103-RF-BT
ECIT-2012
-0103-RF
-WLAN
ECIT-2012
-0103-A
EN609501:2006
+A11:2009+A1:
2010
+A12:2011
IEC62471:2006
1. Removing the back cover.
5
equipment(Directive 2011/65/EU),
Eco-design Requirements for
Energy-Related Products(Directive
2009/125/EC) and their
amendments.This declaration applies
to all specimens manufactured
identical to the samples submitted for
testing/evaluation.
Assessment of compliance of the
product with the requirements relating
to Directive 1999/5/EC was performed
by PHOENIX (Notified Body No.0700)
and assessment of compliance of the
product with the requirements relating
to Directive 2011/65/EU and Directive
2009/125/EC was performed by ZTE
Corporation Reliability Testing Centre.
The assessments were based on the
following regulations and standards:
Require
ment
Press higher end of the key to turn the
volume up and the lower end of the
key to turn it down.
Before Getting Started
Power Key
To prevent possible hearing
damage, do not listen at high
volume levels for long periods.
2
● Press to return to the Home Screen
from any application or screen.
● Hold to see Google search.
Press to get the options on the current
screen.
Hold to see recently used applications
Speaker
Keep away from pacemakers
and other personal medical
devices.
Home Key
Menu Key
Power Key
This device may produce a loud
sound.
Powering On/Off Your
Phone
Flash
Receiver
Avoid contact with magnetic
media.
If you ever encounter any problem
while using the phone, try pressing
and holding the Power Key for about
15 seconds to restart the phone,or
Press the power key to select Reboot
Device.
8
Camera Lens
Do not rely on this device for
emergency communications.
Switch off in explosive
environments.
Restarting the Phone
2. Connect the charger to a standard
AC wall outlet.
3. Disconnect the charger when the
battery is fully charged.
Notes: If excessive discharge of the
battery, the charging icon will
display delay.
Getting to Know Your
Phone
Switch off when instructed in
aircrafts and airports.
Do not dispose of it in a fire.
Make sure the SIM card is in your
phone and the battery is charged.
● Press and hold the Power Key to
turn on your phone.
● To turn it off, press and hold the
Power Key to open the options
menu. Touch Power off and then
touch OK.
Notes: Switch off your phone before
installing or replacing the SIM card.
3. Inserting the memory card.
Avoid any contact with liquid,
keep it dry.
RoHS
RLSHE001227
IEC 62321:2008
150001
ErP
(EC) No
278/2009
This declaration is the responsibility of
the manufacturer:
ZTE Corporation
ZTE Plaza, Keji Road South, Hi-Tech,
Industrial Park, Nanshan District,
Shenzhen, Guangdong, 518057,
P.R.China
Authorised person signing for the
company:
Xu Feng
Quality Director Of
ZTE Corporation
Name in block letters & position in the
company
Shenzhen, February 18, 2014
Place & date
Legally valid signature
This equipment
may be operated
in:
HR
BE
CY
CZ
DK
EE
FI
FR
DE
GR
HU
IE
IT
LV
PT
LT
LU
MT
NL
PL
SK
SI
ES
SE
GB
IS
LI
NO
CH
BG
RO
TR
TRS11120039
12
AT
13
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising