ZTE | MF667 | User manual | ZTE MF667 User manual

ZTE MF667 User manual
MF667
USB Modem
Quick Guide
Getting to know your device
Installation Guide
Your device supports data and SMS services through the mobile phone network, enabling you to
communicate anytime and anywhere.
The following figure is only for your reference. The actual product may be different.
Installing Hardware
1. Press and push the front cover and remove it.
Notes:
Do not open the front cover rudely so as to avoid the damage of the front
cover.
1.
2.
3.
4.
5.
microSD card slot
SIM/USIM card slot
USB Connector
Modem Cap
Front Cover
2. Insert the SIM/USIM card into the SIM/USIM card slot.
Insert the SIM/USIM card with the metal contact area facing downwards
into the slot, and then push SIM/USIM card as far as possible, shown as the
following picture.
3. Insert the microSD card into the microSD card slot.
Notes:
•
This modem only supports microSD card.
is a trademark of SD Card Association.
•
microSD
Insert your microSD card into the microSD card slot, shown as the following
picture.
Connecting the modem to your PC
LEGAL INFORMATION
1.
Plug the USB connector into the USB port and make sure that it is tightly inserted.
Copyright © 2012 ZTE CORPORATION.
All rights reserved.
No part of this publication may be excerpted, reproduced, translated or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without the prior written permission of ZTE
Corporation.
The manual is published by ZTE Corporation. We reserve the right to make modifications on print errors or
update specifications without prior notice.
4. Put the front cover flatly upon the body of modem and push the front cover
to lock the cover in its place.
2.
The OS automatically detects and recognizes new hardware and starts the installation wizard.
Version No. : R1.0
Installing Software
On different operating systems, the installation procedures may be difference. Follow the system
prompts during operation.
ZTE CORPORATION
NO. 55, Hi-tech Road South, ShenZhen, P.R.China
Postcode: 518057
For Windows OS
Your system will start the software setup process automatically when you connect the modem to your
computer correctly. Follow the system prompts to complete the software installation.
Notes:
If the system does not launch installation automatically, you can run the installation program in path of
My Computer > ZTEMODEM.
For Mac OS
The system will automatically display a ZTEMODEM CD-ROM icon on the desktop, when you
connect the modem to your computer correctly. Double click the installation software package in the
ZTEMODEM, and follow the system prompts to complete the software installation.
Removing the modem from your PC
Please close the application software, and then you can pull out the USB Modem safely.
How to use your modem
Various icons are presented to enable quick operation of the following functions:
Warning and Notice
Connect
Connect to the Internet.
SMS
Click the New button, enter recipient’s number and content, and then
click the Send button to send new message.
•
Phonebook
Click the New button to fill in a new contact person and contact
details.
•
Settings
Set the configuration for the USB modem.
•
Data records
Show the connection information.
To the owner
•
•
Some electronic devices are susceptible to electromagnetic interference sent by modem if
inadequately shielded, such as the electronic system of vehicles. Please consult the manufacturer
of the device before using the modem if necessary.
Operating of laptop and desktop PCs and the modem may interfere with medical devices like
hearing aids and pacemakers. Please always keep them more than 20 centimeters away from such
medical devices when they are turned on. Turn the modem off if necessary. Consult a physician or
the manufacturer of the medical device before using the modem.
Be aware of the usage limitation when using a modem at places such as oil warehouses or
chemical factories, where there are explosive gases or explosive products being processed. Turn
off your modem if required.
The use of electronic transmitting devices is forbidden in aircrafts, at petrol stations and in hospitals.
Please observe and obey all warning signs and switch off your modem in these conditions.
Do not touch the inner antenna area if not necessary. Otherwise it will affect your modem’s
•
•
performance.
Store the modem out of the reach of little children. The modem may cause injury if used as a toy.
Do not touch the metallic parts of the modem so as to avoid a burn, when the modem is working.
Using your USB Modem
•
•
•
•
•
•
•
Please use original accessories or accessories that are authorized. Using any unauthorized
accessories may affect your modem’s performance, and violate related national regulations about
telecom terminals.
Avoid using the modem near or inside metallic structures or establishments that can emit
electromagnetic waves. Otherwise it may influence signal reception.
The modem is not waterproof. Please keep it dry and store in a shady and cool place.
Do not use the modem immediately after a sudden temperature change. In such case, it will
produce dew inside and outside the modem, so don’t use it until it becomes dry.
Handle the modem carefully. Do not drop, bend or strike it. Otherwise the modem will be damaged.
No dismantling by non-professionals and only qualified technicians can undertake repair work.
Operating temperature range of -10°C ~ +60°C and humidity range of 5% ~ 95% are recommended.
Limited Warranty
•
This warranty does not apply to defects or errors in the Product caused by:
i. Reasonable abrasion.
ii. End User’s failure to follow ZTE’s installation, operation or maintenance instructions or
procedures.
iii. End User’s mishandling, misuse, negligence, or improper installation, disassembly, storage,
servicing or operation of the Product.
iv. Modifications or repairs not made by ZTE or a ZTE-certified individual.
v. Power failures, surges, fire, flood, accidents, actions of third parties or other events outside
ZTE’s reasonable control.
vi. Usage of third-party products, or usage in conjunction with third-party products provided that
such defects are due to the combined usage.
vii. Any other cause beyond the range of normal usage intended for the Product.
End User shall have no right to reject or return the Product, or receive a refund for the Product from
ZTE under the above-mentioned situations.
• This warranty is End User’s sole remedy and ZTE’s sole liability for defective or nonconforming
items, and is in lieu of all other warranties, expressed, implied or statutory, including but not limited
to the implied warranties of merchantability and fitness for a particular purpose, unless otherwise
required under the mandatory provisions of the law.
Limitation of Liability
ZTE shall not be liable for any loss of profits or indirect, special, incidental or consequential damages
resulting from or arising out of or in connection with using of this product, whether or not ZTE had been
advised, knew or should have known of the possibility of such damages, including, but not limited
to lost profits, interruption of business, cost of capital, cost of substitute facilities or product, or any
downtime cost.
How to get help
You can get Help by:
• Click Help on the software.
• Send E-mail to mobile@zte.com.cn
• Visit http://www.zte.com.cn
• Call Service Hotline: +86–755–26779999
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising