ZTE | MF190 | User manual | ZTE MF190 User manual

ZTE MF190 User manual
Introduction
Transmission speed (Max)
The ZTE USB modem is a multi-mode USB modem, working in HSUPA/HSDPA/WCDMA/EDGE/
GPRS/GSM networks. With USB interface connecting to a laptop or a desktop PC, it integrates
the functionality of a modem and a mobile phone (SMS), and combines mobile communication
with Internet perfectly. It supports data and SMS services through the mobile phone network,
enabling you to communicate anytime and anywhere.
Quick Guide
MF190
HSDPA: 7.2Mbps DL
Hardware Installation
Operation:-10°C ~ +60°C
1. Put finger on the bottom finger grip, and then lift the front cover of
the modem to release and remove.
Temperature
Storage: -40°C ~ +80°C
Dimension
76mm × 26mm × 11mm(without cap)
Notes:
Do not open the front cover rudely so as to avoid the damage of the front cover.
2. Insert the SIM/USIM card into the SIM/USIM card slot.
Insert the SIM/USIM card with the metal contact area facing downwards into the slot, and then
push SIM/USIM card as far as possible, shown as the following picture.
Getting to know your device
The following figure shows the appearance of the MF190. It is only for your
reference. The actual product may be
different.
Specification
USB Modem
HSUPA: 5.76Mbps UL
The following table shows the specification of your device.
Interface Type
USB 2.0 HIGH SPEED
Systems supported
Supports most types of laptop and desktop PC.
Operating systems supported
Windows XP, Vista, Windows 7
Functions
SMS service, Data service, Applications management, etc.
Network Standards
HSUPA/HSDPA/WCDMA/EDGE/GPRS/GSM
MAC 10.4, 10.5, 10.6
1.
2.
3.
4.
5.
Indicator
Front Cover
Modem Cap
SIM/USIM card slot
USB Connector
3. Put the front cover of the modem flatly upon the body of modem.
Direct the front cover towards the locking catches on the sides of the
modem and push the front cover of the modem to lock the front cover
into its place.
4. Connect the Modem to your laptop or desktop PC.
Plug the USB connector into your computer’s USB port and make
sure that it is tightly inserted.
ZTE CORPORATION
NO. 55, Hi-tech Road South, ShenZhen, P.R.China
Postcode: 518057
The OS automatically detects and recognizes new hardware and starts the installation wizard.
Software Installation Guide
How to use your modem
On different operating systems, the installation procedures may be difference. Follow the
system prompts during operation.
For Windows OS
Your system will start the software setup process automatically when you connect the modem to
your computer correctly. Follow the system prompts to complete the software installation.
Various icons are presented to enable quick operation of the following functions:
Notes:
If the system does not launch installation automatically, you can run the installation program in
path of My Computer > ZTEMODEM.
For Mac OS
The system will automatically display a ZTEMODEM CD-ROM icon on the desktop, when you
connect the modem to your computer correctly. Double click the installation software package in
the ZTEMODEM, and follow the system prompts to complete the software installation.
Safe removal from your system
Please close the application software, and then you can pull out the USB Modem safely.
Connection
Connect to the Internet.
Statistics
Show data statistics.
Text
Click the New Message button, enter recipient’s number and content,
and then click Send to send new message.
Phonebook
Click New > New Contact to add a new contact.
Airtel Menu
Supplemental Airtel Menu services. Please contact with your service
provider for more information.
Settings
Set the configuration for the USB modem.
Help
Show the help document.
Warning and Notice
To the owner
Some electronic devices are susceptible to electromagnetic interference sent by modem if inadequately shielded, such
as the electronic system of vehicles. Please consult the manufacturer of the device before using the modem if necessary.
Operating of laptop and desktop PCs and the modem may interfere with medical devices like hearing aids and pacemakers.
Please always keep them more than 20 centimeters away from such medical devices when they are turned on. Turn the
modem off if necessary. Consult a physician or the manufacturer of the medical device before using the modem.
Be aware of the usage limitation when using a modem at places such as oil warehouses or chemical factories, where
there are explosive gases or explosive products being processed. Turn off your modem if required.
The use of electronic transmitting devices is forbidden in aircrafts, at petrol stations and in hospitals. Please observe
and obey all warning signs and switch off your modem in these conditions.
Do not touch the inner antenna area if not necessary. Otherwise it will affect your modem’s performance.
Store the modem out of the reach of little children. The modem may cause injury if used as a toy.
Do not touch the metallic parts of the modem so as to avoid a burn, when the modem is working.
Using your USB Modem
Please use original accessories or accessories that are authorized. Using any unauthorized accessories may affect
your modem’s performance, and violate related national regulations about telecom terminals.
Avoid using the modem near or inside metallic structures or establishments that can emit electromagnetic waves.
Otherwise it may influence signal reception.
The modem is not waterproof. Please keep it dry and store in a shady and cool place.
Do not use the modem immediately after a sudden temperature change. In such case, it will produce dew inside and
outside the modem, so don’t use it until it becomes dry.
Handle the modem carefully. Do not drop, bend or strike it. Otherwise the modem will be damaged.
No dismantling by non-professionals and only qualified technicians can undertake repair work.
Operating temperature range of -10°C ~ +60°C and humidity range of 5% ~ 95% are recommended.
Limited Warranty
This warranty does not apply to defects or errors in the Product caused by:
i.
Reasonable abrasion.
ii. End User’s failure to follow ZTE’s installation, operation or maintenance instructions or procedures.
iii. End User’s mishandling, misuse, negligence, or improper installation, disassembly, storage, servicing or operation
of the Product.
iv. Modifications or repairs not made by ZTE or a ZTE-certified individual.
v. Power failures, surges, fire, flood, accidents, actions of third parties or other events outside ZTE’s reasonable control.
vi. Usage of third-party products, or usage in conjunction with third-party products provided that such defects are due to
the combined usage.
vii. Any other cause beyond the range of normal usage intended for the Product.
End User shall have no right to reject or return the Product, or receive a refund for the Product from ZTE under the abovementioned situations.
This warranty is End User’s sole remedy and ZTE’s sole liability for defective or nonconforming items, and is in lieu
of all other warranties, expressed, implied or statutory, including but not limited to the implied warranties of merchantability and fitness for a particular purpose, unless otherwise required under the mandatory provisions of the law.
Limitation of Liability
ZTE shall not be liable for any loss of profits or indirect, special, incidental or consequential damages resulting from or
arising out of or in connection with using of this product, whether or not ZTE had been advised, knew or should have known
of the possibility of such damages, including, but not limited to lost profits, interruption of business, cost of capital, cost of
substitute facilities or product, or any downtime cost.
How to get help
You can get Help by:
Clicking Help on the software.
Sending E-mail to mobile@zte.com.cn
Visiting http://www.zte.com.cn
Calling Service Hotline: +86–755–26779999
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising