ZTE | MF667 | User manual | ZTE MF667 User manual

ZTE MF667 User manual
Getting to Know Your Device
Installation Guide
Copyright © 2014 ZTE CORPORATION.
Your device supports data and SMS services through the mobile phone network, enabling you to communicate
anytime and anywhere.
The following figure is only for your reference. The actual product may be different.
Installing the (U)SIM Card and microSDHC Card
All rights reserved.
USB Modem
Quick Start Guide
No part of this publication may be excerpted, reproduced, translated or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without the prior written permission of ZTE Corporation.
microSDHC™ logo
microSDHC card slot
SIM/USIM card slot
USB Connector
Modem Cap
Front Cover
Install the microSDHC card to the microSDHC card slot.
Slide the front cover gently back into place.
Press and push the front cover and remove it.
Do not open the front cover rudely. Failing to do so may cause damage to the front cover.
The manual is published by ZTE Corporation. We reserve the right to make modifications on print errors or update specifications without prior notice.
Version No. : R1.0
Edition Time: July 16, 2014
2. Install the (U)SIM card to the (U)SIM card slot.
Your device does not support the Micro/Nano SIM card or any other nonstandard SIM cards.
To avoid damaging the device, do not use those cards or any card holders.
is a trademark of SD-3C, LLC.
NO. 55, Hi-tech Road South, ShenZhen, P.R.China
Postcode: 518057
Tel: +86-755-26779999
URL: http://www.ztedevice.com
E-mail: mobile@zte.com.cn
Connecting the Modem to Your PC
Install the device to your computer’s USB port securely. The OS automatically detects and recognizes your modem and starts the installation wizard.
Your device is connected to the Internet automatically, and you can surf on the Internet directly.
NOTE: If the system does not launch installation automatically, you can run the installation program by selecting
My Computer > ZTE MODEM.
NOTE: To modify the parameters of your device, log in to the web GUI configuration page by visiting or http://m.home.
Warning and Notice
Accessing the Internet
To the Owner
After the device is connected to your PC successfully, you can access the Internet in Automatic or Manual
mode. The default mode is Automatic.
Log in to the web GUI configuration page.
Select Settings > Network Settings > Dial-up Settings > WAN Connection Mode >
Manual, and then click Apply to confirm your configuration.
Click Home and then click Connect to access the Internet.
If inadequately shielded, some electronic devices may be affected by the electromagnetic interference
caused by the modem, such as the electronic system of vehicles. Consult the manufacturers of such de6
vices before using the modem if necessary.
Operating the modem may interfere with medical instruments such as hearing aids and pacemakers. Always keep the modem more than 20 centimeters away from such medical instruments when your modem
is turned on. Turn the modem off if necessary. Consult a physician or the manufacturers of medical instruments before using the modem if necessary.
Be aware of the usage limitation when using the modem at places such as oil warehouses or chemical
factories, where there are explosive gases or explosive products being processed. Turn off the modem if
Do not use electronic transmission devices in aircrafts, at petrol stations or in hospitals. Observe and obey
Using Your USB Modem
all warning signs, and turn off the modem in these conditions.
Do not touch the inner antenna area unless it is necessary. Otherwise the performance of the modern may
be affected.
Keep the modem out of the reach of little children. The modem may cause an injury if used as a toy.
When the modem is operating, do not touch the metallic parts. Failing to do so may cause burns.
Use original accessories or accessories that are authorized. Using any unauthorized accessories may affect
the performance of the modem and violate the related national regulations about telecom terminals.
Avoid using the modem near or inside metallic structures or establishments that can emit electromagnetic
waves, because signal reception may be affected.
The modem is not waterproof. Keep the modem dry and store it in a shady and cool place.
Do not use the modem immediately after a sudden temperature change. In such case, dew may be generated inside and outside the modem, so do not use it until it becomes dry.
Handle the modem carefully. Do not drop, bend or strike it. Otherwise the modem may be damaged.
Only qualified personnel can dismantle and repair the modem.
An operating temperature between -10°C and +35°C and a humidity between 5% and 95% are recommended.
Limited Warranty
This warranty does not apply to defects or errors in the product caused by:
i. Reasonable abrasion.
ii. End users’ failure to follow ZTE’s installation, operation or maintenance instructions or procedures.
iii. End users’ mishandling, misuse, negligence, or improper installation, disassembly, storage, servicing or
operation of the product.
iv. Modifications or repairs not provided by ZTE or a ZTE-certified individual.
v. Power failures, surges, fire, flood, accidents, and actions of third parties or other events outside ZTE’s
reasonable control.
vi. Usage of third-party products, or usage in conjunction with third-party products if such defects are due
to the combined usage.
vii. Any other cause beyond the range of normal usage intended for the product.
End users have no right to reject or return the product, or receive a refund for the product from ZTE under the
above-mentioned situations.
This warranty is end users’ sole remedy and ZTE’s sole liability for defective or nonconforming items, and is
in lieu of all other warranties, expressed, implied or statutory, including but not limited to the implied warranties of merchantability and fitness for a particular purpose, unless otherwise required under the mandatory
provisions of the law.
Limitation of Liability
ZTE shall not be liable for any loss of profits or indirect, special, incidental or consequential damages resulting from or arising out of or in connection with using of this product, no matter whether or not ZTE had been
advised, knew or should have known of the possibility of such damages, including, but not limited to lost profits,
interruption of business, cost of capital, cost of substitute facilities or product, or any downtime cost.
How to Get Help
You can get help by:
Sending an E-mail to mobile@zte.com.cn
Visiting www.ztedevice.com
Calling the service hotline: +86–755–26779999
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF