ZTE | R358 | User manual | ZTE R358 User manual

ZTE R358 User manual
Security
 To protect your mobile phone from illegal use, take the
security measures as follows:
 Set PIN codes of the SIM card.
 Set handset lock code.
 Set call restrictions.
Version No.: R1.0
Edition Time: 2012.11.01
Safety Precautions
This section includes some important information on safe and
efficient operation. Please read this information before using the
phone.
Operational Precautions
 Please use your phone properly. When making or receiving a
call, please hold your phone as holding a wireline telephone. Make
sure that the phone is at least one inch (about two point five
centimeters) from your body when transmitting.
 Do not touch the antenna when the phone is in use. Touching
the antenna area affects call quality and may cause the phone to
operate at a higher power level than needed.
 Some people may be susceptible to epileptic seizures or blackouts when
exposed to flashing lights, such as when watching television or
playing video games. If you have experienced seizures or
blackouts, or if you have a family history of such occurrences,
please consult your doctor before playing video games on your
phone or enabling a flashing-light feature on your phone. (The
flashing-light feature is not available on all products.)
 Keep the phone out of the reach of small children. The phone
may cause injury if used as a toy.
 Use careful with the earphone maybe possible excessive sound
pressure from earphones and headphones can cause hearing loss.
 Turn off your phone before you clean it. Use a damp or anti-static
cloth to clean the phone. Do not use a dry cloth or electrostatically
charged cloth. Do not use chemical or abrasive cleaners as these
could damage the phone.
 As your mobile phone can produce electromagnetic field, do not
place it near magnetic items such as computer disks.
 Using the phone near electrical appliances such as TV, telephone,
radio and personal computer can cause interference.
 Do not expose your mobile phone to direct sunlight or store it in
hot areas. High temperatures can shorten the life of electronic
devices.
 Keep your phone dry. Any liquid may damage your phone.
 Do not drop, knock or harshly treat the phone. Rough handling can
break internal circuit boards.
 Do not connect the phone with any incompatible enhancement.
 Do not attempt to disassemble the mobile phone or battery.
 Do not store the phone with flammable or explosive articles.
 Do not charge the mobile phone without battery.
Precautions for Potentially Explosive Atmospheres
 Switch off your phone prior to entering any area with potentially
explosive atmospheres, such as fueling areas, fuel or chemical
transfer or storage facilities.
 Do not remove, install, or charge batteries in such areas. Spark in a
potentially explosive atmosphere can cause an explosion or fire
resulting in bodily injury or even death.
 To avoid possible interference with blasting operations, switch
off your phone when you are near electrical blasting caps, in a
blasting area, or in areas posted “Turn off electronic devices.” Obey
all signs and instructions.
1
3
Precautions While Driving
 Please pay attention to the traffic safety. Check the laws and regulations
on the use of your phone in the area where you drive. Always obey
them.
 Use hands-free function of the phone, if available.
 Pull off the road and park before making or answering a call if
conditions require.
Precautions for Electronic Devices
 Some electronic devices are susceptible to electromagnetic interference
sent by mobile phone if inadequately shielded, such as electronic
system of vehicles. Please consult the manufacturer of the device before
using the phone if necessary.
Precautions for Medical Devices and Facilities
 When using your phone near pacemakers, please always keep
the phone more than eight inches (about twenty centimeters)
from the pacemaker when the phone is switched on. Do not carry
the phone in the breast pocket. Use the ear opposite the
pacemaker to minimize the potential for interference. Switch off
the phone immediately if necessary.
 Some phones may interfere with some hearing aids. In the
event of such interference, you may consult your hearing aids
manufacturer to discuss alternatives.
 If you use any other personal medical device, please consult
the manufacturer of your device to determine if it is adequately
shielded from RF energy.
 In those facilities with special demand, such as hospital or health
care facilities, please pay attention to the restriction on the use of
mobile phone. Switch off your phone if required.
Mobile Phone
 Please use original accessories or accessories approved by
the phone manufacturer. Using any unauthorized accessories
may affect your mobile phone’s performance, damage your phone
or even cause danger to your body and violate related local
regulations about telecom terminals.
2
Safety and General Use in Vehicles
 Safety airbag, brake, speed control system and oil eject system
shouldn’t be affected by wireless transmission. If you do meet
problems above, please contact your automobile provider. Do not
place your phone in the area over an airbag or in the airbag
deployment area. Airbags inflate with great force. If a phone is
placed in the airbag deployment area and the airbag inflates, the
phone may be propelled with great force and cause serious injury
to occupants of the vehicle.
 Please turn off your mobile phone at a refueling point, and the
same to the place where the use of two-way radio is prohibited.
Aircraft Safety
 Please turn off your mobile phone before the airplane takes off.
In order to protect airplane’s communication system from
interference, it is forbidden to use mobile phone in flight. Safety
regulations require you to have permission from a crew member to
use your phone while the plane is on the ground.
 If the mobile phone has the function of automatic timing
power-on, please check your alarm setting to make sure that your
phone will not be automatically turned on during flight.
Battery Use
 Do not store battery in hot areas or throw it into fire. Otherwise,
it will cause explosion.
 Do not disassemble or refit the battery. Otherwise, it will cause
liquid leakage, overheating, explosion and ignition of the battery.
 Please store the battery in a cool dry place if you don’t use it for a
long period.
 The battery can be recharged for hundreds of times, but it will
eventually wear out. When the operating time (talk time and
standby time) is noticeably shorter than normal, it is time to
replace it with a new one.
 Please stop using the charger and battery when they are
damaged or show evidence of aging.
 Return the worn-out battery to the provider or dispose of it in
accordance with environment regulations. Do not dispose of it in
household rubbish.
 Please use original batteries or batteries approved by the
phone manufacturer. Using any unauthorized battery may affect your
handset performance or may cause danger of explosion, etc.
Warning: If the battery is damaged, do not discharge it. If the
leakage does come into contact with the eyes or skin, wash
thoroughly in clean water and consult a doctor.
Limitation of Liability
ZTE shall not be liable for any loss of profits or indirect, special, incidental
or consequential damages resulting from or arising out of or in
connection with using this product, whether or not ZTE had been
advised, knew or should have known the possibility of such damages.
The user should refer to the enclosed warranty card for full warranty and
service information.
Note: The pictures and icons shown in the manual are just
schematic drawings for function demonstration. If they are
inconsistent with your handset, please take your handset as the
standard. If the inconsistency exits in the manual because of the
handset function updating, please refer to the follow-up public
information from ZTE CORPORATION.
Function
Description
Left soft key
Performs the function indicated at the left
bottom of the screen.
Right soft key
Performs the function indicated at the
right bottom of the screen.
Center key
Press to confirm actions and make
selections.
4-Way
Navigation
keys
These keys (UP, DOWN, LEFT and RIGHT)
allow for navigation through menu options
and quick access to some function menus.
Send key
Press to dial a phone number or answer a
call, or view the call history.
End/Power
key
Press to exit to the idle mode.
Hold to switch on/off the phone.
QWERTY
keyboard
Press to enter characters 0-9, the
alphabets from a-z and symbols.
Note: In this User Manual, “press a key” means to press the key
and release it, while “hold a key” means to press the key for at
least two seconds and then release it.
5
RF Exposure
Specific Absorption Rate (SAR)
Your mobile device is a radio transmitter and receiver. It is designed
not to exceed the limits for exposure to radio waves recommended by
international guidelines. These guidelines were developed by the
independent scientific organization ICNIRP and include safety margins
designed to assure the protection of all persons, regardless of age and
health.
The guidelines use a unit of measurement known as Specific
Absorption Rate, or SAR. The SAR limit for mobile devices is 2.0 W / kg
and the highest SAR value for this device when tested at the ear was
0.655 W / kg. As mobile devices offer a range of functions, they can be
used in other positions, such as on the body as described in this user
guide.
As SAR is measured utilizing the device’s highest transmitting power,
the actual SAR of this device while operating is typically below that
indicated above. This is due to automatic changes to the power level of
the device to ensure it only uses the minimum power required to
communicate with the network.
* The tests are carried out in accordance with EN 62209-1-2006.
7
9
Key Functions
Locking and Unlocking the Keypad
In idle screen, hold
Headset jack
Torch
Earpiece
4-Way Navigation
keys and Center
key
Charger interface
Right soft key
Left soft key
Status Bar Icons
Indicator
End/Power key
Send key
Messaging key
Phonebook key
QWERTY
keyboard
Body Worn Operation
Important safety information regarding radio frequency (RF) radiation
exposure.
To ensure compliance with RF exposure guidelines the phone must be
used with a minimum of 15 mm separation from the body.
Failure to observe these instructions could result in your RF exposure
exceeding the relevant guideline limits.
key to lock the keypad.
To unlock the keypad, press Left soft key and then press
Key.
Locking the keypad can prevent unintentional operations on it.
You can answer an incoming call with the regular operation
when the keypad is locked.
What it means
Indicator
What it means
Signal strength
Missed call
Silent
New message
General
New MMS
Outdoor
Battery status
Meeting
Alarm clock set
Headset
Keypad locked
Battery
The lithium ion battery of the mobile phone can be immediately
used after unpacking.
4
6
8
10
The manual is published by ZTE Corporation. We reserve the
right to make modifications on print errors or update
specifications without prior notice.
No part of this publication may be excerpted, reproduced,
translated or utilized in any form or by any means, electronic
or mechanical, including photocopying and microfilm,
without the prior written permission of ZTE Corporation.
All rights reserved.
Copyright © 2012 ZTE CORPORATION.
LEGAL INFORMATION
Installing the battery
1. Pull the battery cover from the notch on the bottom and
remove the cover.
2. Insert the battery by aligning the gold-colored contacts with
the contacts in the battery slot.
3. Push down the upper section of the battery until it clicks into
place.
4. Replace the battery cover and close it gently until you hear a
click.
Remove the battery cover
2. Turn the phone over and remove the battery cover.
3. Remove the battery if it is already installed.
4. Hold your SIM card with the cut corner oriented as shown
and then slide it into the card holder with the metal contacts
facing downward.
5. Replace the battery first.
6. Replace the battery cover.
Insert the SIM card
SIM card (Subscriber Identity Module) is a micro-chip that holds
your personal information such as names and phone numbers.
Your phone won’t work without it. If you already have contacts
on your SIM card, they can be transferred in most cases.
Push down the battery
Removing the battery
1. Make sure that your mobile phone is switched off.
2. Remove the battery cover.
3. Pull the battery up and remove it from the mobile phone.
You can use memory card to expand the storage of the phone.
You can store or copy files such as photos, music, and so on.
Insert the memory card as follows:
Open the battery cover and remove the battery. Insert the card
with the metal contacts facing down until it clicks to the right.
13
Charging the battery
Your phone is powered by a rechargeable battery. For maximum
battery performance, it is recommended that you first use up the
battery power and then charge it completely. A new battery’s full
performance is achieved only after three complete charge and
discharge cycles.
1. Connect your travel adapter to the left side of your mobile
phone as shown in the diagram.
2. Connect the other end of the travel adapter to the mains
socket.
3. When the battery is being charged, the display will show the
animation of a battery being filled up.
4. When the battery is fully charged, disconnect the charger.
Insert the memory card
Powering your phone on/off
Make sure that the SIM card is in your device and the battery is
charged.
Hold the End/Power key to power on/off the phone.
Writing text


Charge the battery
Inserting the SIM card
Insert the SIM card as follows:
1. Make sure that the phone is switched off and the charger is
disconnected from the phone.
12
Text Mode
Your mobile phone provides the following input methods:
abc mode and Numeric (123) mode.
Entering letters
Press A ~ Z to enter desired characters. It does not work in
numeric mode.
 Press
to switch between uppercase and lowercase.
 Press
to enter a space.
to delete letters left of the cursor. Hold
 Press
delete all characters and clear the display.
14
Adding contact to the Phonebook
Making and receiving calls


Inserting the Memory Card
11

Entering numbers
In numeric mode, use the numeric keys to enter numbers.
Entering Symbols
Press Options → Input method → Insert symbol, then
select desired symbol.
There are some numbers that you may want to call again and
again, so it makes sense to add these numbers to your
Phonebook. You can then access these numbers quickly and
easily.
1. Go to Menu → Phonebook → Add new contact.
2. Select to save the number to SIM or phone.
3. Edit the information and save it.
 You can also save a number right after you’ve made or
received a phone call or a text message from someone who
is not yet in your Phonebook list.
 To delete someone from your Phonebook list, first select the
name, and then select Options → Delete.
Pull up the battery
Replace the battery cover



The most basic way to make a call is to input the number in the
standby mode and press the Send key. You can also make a
call from the Phonebook list.
To call someone: Go to Menu → Phonebook. Use the
Up/Down keys to find the name of the person you want to
call. You can also type in the first letter of the name of the
person you want to call to find the right name, and press the
Send key.
To receive a call, press the Send key.
To end a call, press the End/Power key.
User profiles
Go to Menu → User profiles. You can select Options →
Activate to activate a profile. Or you can select Options →
Customize to edit a profile.
Call center
Go to Menu → Call center.
 Call history
Dialed calls, Received calls and Missed calls are saved in Call
history. If the records are full, the earliest saved records will
be deleted.
Also, you can delete call logs and view call timers in Call history.
 Call settings
You can set call waiting, call divert and call barring and so on.
Setting your phone
You can adjust various settings of your phone. Go to Menu →
Settings.
 Phone settings: Set time and date and schedule power on/off,
select language, set pref. input methods and display, etc.
 Network settings: Set to automatically or manually select
network and set the preferred networks.
 Security settings: Set security features to protect your phone
and SIM card from unauthorized use.
 Connectivity: You can add and view your Data account.
 Restore factory settings: Enter the phone lock code to
restore to the factory settings. Some personal information
might be lost if you use this function, so be careful.
15
17
 To reject a call, press the End/Power key.
Make sure that you are in an area with sufficient signal coverage
to make calls. The strength of the network signal is indicated on
the Status Bar of the screen.
Note: You may be required to input the phone password in
some of the security settings interfaces. The default password is
1122. Go to Security settings → Phone security → Change
password to change the phone password.
Sending and receiving messages
Organizer
You can use your mobile phone to send and receive messages.
 Send a message
1. Go to Menu → Messaging → Write message →
Text/Multimedia message.
2. Write your message. For more information on input
method, see section ‘Text Input’. When you write an SMS,
press Options → Send to, and edit the recipient. When
you write an MMS, you can edit To, Cc, Bcc, Subject and
content. In content field, you can select Options and
then choose add picture, sound, video, attachment and so
on.
3. When you finish writing an SMS/MMS, select Options to
send or save the message.
 Receive a message
Upon receiving a message, the mobile phone will alert you
with a ringtone, prompt, or a new message icon.
1. Press View to enter the Inbox directly and then press the
Center key to open the message.
2. Use the Up/Down keys to view the message.
3. While the message is open, use Options to reply, delete,
or forward the message. You can also call back the
sender.
to
16
Go to Menu → Organizer.
 Calendar
Go to Organizer → Calendar. The calendar of the current
month will be displayed on the screen and the current date
will be marked by a background box in a special color.
 Alarm
Go to Organizer → Alarm. You can view and edit the alarm
clocks settings. You can also enable or disable the alarms.
Fun&Games
Go to Menu → Fun & Games → Games.
Your mobile phone has classic games. Select a game and start it,
you can view Help to see the rules of the game.
Note: please take your handset as the standard.
Extra
Go to Menu → Extra.
 Calculator
You can perform simple calculations. You can add, subtract,
multiply or divide, and select M+, M-, MR, and MC to perform
relevant operations.
Note: This calculator has limited accuracy and rounding
errors may occur especially in long division.
18
Multimedia
Go to Menu → Multimedia.
 Image viewer
You can select an image and view it.
 Video recorder
Aim the camera lens at the object and then press Center
key to start, press it again to pause, and press Right soft
key to finish recording.
 Video player
You can select a video and play it.
 Audio player
You can play the audio in the memory card.
Note: Before using this function, you must insert the
memory card first.
 FM radio
With the radio, you can search for radio channels and listen
to them. In the FM radio interface, you can press the
Up/Down keys to adjust volume, press the Left/Right
keys to tune the frequency, and press the Center key to
pause. Select Options to enter the submenu.
Note: The quality of the radio broadcast depends on the
coverage of the radio station in that particular area.
Note: Using headphones FM function will be more superior.
How to take a photo
Go to Menu→Camera.
 To take a photo: aim the camera at the object and then press the
Center key to take the shot.
 Configure camera: press the Left soft key to configure your
camera.
EC DECLARATION OF CONFORMITY
It is hereby declared that following designated product:
Product Type: GSM(GPRS) Quad-Band Digital Mobile Phone
Model No: ZTE R358/ZTE-G R238
Product Description: GSM(GPRS) Quad-Band Digital Mobile Phone
Complies with the essential protection requirements of the Radio and
Telecommunication Terminal Equipment (Directive 1999/5/EC),
Restriction of the Certain Hazardous Substances in electrical and
electronic equipment (Directive 2011/65/EU), Eco-design Requirements
for Energy-Related Products (Directive 2009/125/EC) and their
amendments..
This declaration applies to all specimens manufactured identical to the
samples submitted for testing/evaluation.
Assessment of compliance of the product with the requirements
relating to Directive 1999/5/EC was performed by PHOENIX TESTLAB
GmbH (Notified Body No.0700) and assessment of compliance of the
product with the requirements relating to Directive 2011/65/EU and
Directive 2009/125/EC was performed by ZTE Corporation Reliability
Testing Centre. The assessments were based on the following
regulations and standards:
19
File manager
21
Requirement
Go to Menu → File manager. You can check all the folders in
the memory card, create new ones or rename, delete the folders,
etc.
Note: When you select Format, the data will be lost, so please
be careful with this function.
Health and
safety
EN 60950-1:2006/A11:2009
Radio
Spectrum
RoHS
EN 301 489-1 V1.8.1;
EN 301 489-7 V1.3.1;
EN 301 489-17 V2.1.1;
EN 55013: 2001 A2:2006;
EN 55020: 2007
EN 300328 V1.7.1;
EN 301 511 V9.0.2;
IEC 62321:2008
ErP
(EC) No 278/2009
Services
Go to Menu → Services. Services allow you to view internet
content. In Services you also can use the STK.
 Internet service
You can perform the following operations:
 Homepage: Go to your homepage interface.
 Bookmarks: Access your phone’s preset websites. Select a
bookmark to load the website.
 Search or input URL: Input a URL to visit the site.
 Recent pages: Display the pages you’ve visited recently.
Select an item to visit the page again.
 Settings: You can set Homepage, Data account, Browser
options and Preferences.
 Licence manager
 Licence list: Display the list of licences.
 Status: Check the version and time.
 Advance: Select Sweep to remove useless licences and reboot
your phone.
 STK
SIM card Toolkit (STK) services are value-added services
provided by your network provider.
Your mobile phone supports STK service, but if your SIM card
and network provider do not support the service, these
functions can’t be used.
20
Standard
EN 50360-2001;EN623112008;
EN62209-1-2006;EN622092-2010;
EMC
Report No.
2012SAR391
2012SAF0142
2012TAE183;
2012EMC392
2012TAR513;
2012FTA393
RLSHE001195701
TRS11120039
This declaration is the responsibility of the manufacturer:
ZTE Corporation
ZTE Plaza, Keji Road South, Hi-Tech, Industrial Park,
Nanshan District, Shenzhen, Guangdong, 518057,P.R.China
Authorised person signing for the company:
Xu feng
Quality Director Of ZTE Corporation
Name in block letters & position in the company
Shenzhen, 29 Oct 2012
Place & date
Legally valid signature
22
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising