No part of this publication may be quoted, reproduced, translated or used in any form or by any means, electronic or mechanical, including photocopying and microfilm, without the prior written permission of ZTE Corporation. ZTE Corporation reserves the right to make modifications on print errors or update specifications in this guide without prior notice.
ZTE and the ZTE logos are trademarks of the ZTE Corporation. Google and Android are trademarks of Google, Inc. The
trademark and logos are owned by the Bluetooth SIG, Inc. and any use of such trademarks by ZTE Corporation is under license. microSDHC Logo is a trademark of SD-3C, LLC. Other trademarks and trade names are the property of their respective owners.
1.Touch Screen 2. Home Key
Display user interface. Press to return to the Home screen from any application or screen. Hold to see Google search. 3.Menu Key 4.Back Key 5.Power Key Press to get the options for the current screen. Hold to see recently used applications. Press to go to the previous screen. Hold to turn on or off Silent or Vibrate or Ring or Airplane mode or Reboot Device, or to power off. Press to switch your phone to Sleep mode. Press to wake up your phone. We offer self-service for our smart terminal device users. Please visit the ZTE official website (at www.ztedevice.com) for more information on self-service and supported product models. Information on the website takes precedence. Visit http://www.ztedevice.com to download the user manual. Just click
from the home page and then select your location, product type, and name to search for related support information.
ZTE Corporation expressly disclaims any liability for faults and damages caused by unauthorized modifications of the software.
6. Volume Keys
Press or hold to turn the volume up or down. 7.Headp
hone Interface External headphone cable. 8. Proximity sensor Support the proximity sensor function. 9. Front camera 10.Earph
one 11.USB Interface Photographed using parts. Receiving sound during a call. External USB data cable. 12.Micro
phone Send voice during a call. 13.Rear Camera 14.Flash Light Photographed using parts. Instant illumination in low light situations.
Do not use hand-held while driving Do not use while re-fuelling For body-worn operation maintain a separation of 15 mm This device may produce a bright or flashing light Small parts may cause a choking hazard Do not dispose of it in a fire This device may produce a loud sound To prevent possible hearing damage, do not listen at high volume levels for long periods. Avoid contact with magnetic media
Removing the Back Cover 2.
Installing the SIM Card Avoid Extreme Temperatures Keep away from pacemakers and other personal medical devices Avoid any contact with liquid, keep it dry Switch off when instructed in hospitals and medical facilities Do not attempt to disassemble Switch off when instructed in aircrafts and airports Only use approved accessories Switch off in explosive environments Do not rely on this device for emergency communications
● SIM card 1 (the figure to the right of the main card) support WCDMA and GSM networks; SIM card 2 only supports GSM networks. ● Switch off your phone before installing or replacing the SIM card. ● ● If you're using a small card, please use the SIM card dedicated card sets, and then the whole into the slot Normal use. Please buy standardization SIM dedicated card sets from the formal channels ， otherwise the slot shrapnel may be pulled off when taking cards.
The phone supports SD card hot-plug function.Some applications may require a microSD card to work normally or may store certain data on it. Therefore, it is recommended that you keep a microSD card installed and not remove or replace it randomly.
When you first get your new phone you’ll need to charge the battery like this: 1.
Connect the adapter to the charging jack. 2.
Connect the charger to a standard AC power outlet. Disconnect the charger when the battery is fully charged.
When this crossed-out wheeled bin symbol is attached to a product, it means the product is covered by the European Directive 2012/19/EU. All electrical and electronic products should be disposed of separately from the municipal waste stream via designated collection facilities appointed by the government or the local authorities. The correct disposal of your old appliance will help prevent potential negative consequences for the environment and human health. For this product’s recycling information based on WEEE directive, please send an e-mail to [email protected]
● If excessive discharge of the battery, the charging icon will display delay. ● If the battery is extremely low, you may be unable to power on the phone even when it is being charged. In this case, try again after charging the phone for at least 10 minutes. Contact customer service if you still cannot power on the phone after prolonged charging.
explode. Use only ZTE-approved chargers and cables. The use of unapproved accessories could damage your phone or cause the battery to
Your mobile device is a radio transmitter and receiver. It is designed not to exceed the limits for exposure to radio waves recommended by international guidelines. These guidelines were developed by the independent scientific organization ICNIRP and include safety margins designed to assure the protection of all persons, regardless of age and health. The guidelines use a unit of measurement known as Specific Absorption Rate, or SAR. The SAR limit for mobile devices is 2 W/kg and the highest SAR value for this device when tested was 0.731 W/kg. As mobile devices offer a range of functions, they can be used in other positions, such as on the body. As SAR is measured utilizing the device’s highest transmitting power, the actual SAR of this device while operating is typically below that indicated above. This is due to automatic changes to the power level of the device to ensure it only uses the minimum power required to communicate with the network.
Make sure the battery is charged before powering on. Press and hold the
to turn on your phone. To turn it off, press and hold the
to open the options menu. Touch
to activate your screen display. 2.
Touch and hold the screen. at the center of
If you have set an ‘unlock pattern’, or a PIN/password for your phone, you’ll need to draw the pattern or enter the PIN/password to unlock your screen.
It is hereby declared that following designated product: Product Type: WCDMA/GSM （ GPRS ） Dual-Mode Digital Mobile Phone Model No: ZTE Blade C2 Plus Product Description: UMTS/GSM Mobile Phone Phone
the essential protection requirements of Directives on Radio and Telecommunication Terminal Equipment (Directive 1999/5/EC) ， Restriction of the Certain Hazardous Substances in electrical and electronic equipment (Directive 2011/65/EU), Eco-design Requirements for Energy-Related Products (Directive 2009/125/EC) and their amendments.
Your phone’s touch screen lets you control actions through a variety of touch gestures. ● ● ● ●
When you want to type using the onscreen keyboard, select items onscreen such as application and settings icons, or press onscreen buttons, simply touch them with your finger.
To open the available options for an item (for example, a message or link in a Web page), touch and hold the item.
To swipe or slide means to quickly drag your finger vertically or horizontally across the screen.
To drag, press and hold your finger with some pressure before you start to move your finger. While dragging, do not release your finger until you have reached the target position. This declaration applies to all specimens manufactured identical to the samples submitted for testing/evaluation. Assessment of compliance of the product with the requirements relating to Directive 1999/5/EC was performed by PHOENIX (Notified Body No.0700) and assessment of compliance of the product with the requirements relating to Directive 2011/65/EU was performed by Intertek Testing Services Ltd., Shanghai LAB and Directive 2009/125/EC was performed by ZTE Corporation Reliability Testing Centre.The assessments were based on the following regulations and standards: ● ●
In some apps (such as Maps, Browser, and Gallery), you can zoom in and out by placing two fingers on the screen at once and pinching them together (to zoom out) or spreading them apart (to zoom in).
For most screens, you can automatically change the screen orientation from portrait to landscape by turning the phone sideways.
Health and safety EMC Radio Spectrum ErP RoHS
EN 62311:2008/ EN62209-2:2010 EN 50360:2001 + A1:2012 EN 62209-1:2006 EN 62479:2010 EN 50566:2013 EN60950-1:2006+A1 1:2009+A1:2010+A1 2:2011 EN 50332-1:2000/ EN 50332-2:2003 EN 301 489-1 V1.9.2/-3 V1.6.1/-7 V1.3.1/-17 V2.2.1/-24 V1.5.1 EN 300 328 V1.8.1 EN 301 511 V9.0.2/ EN 301 908-2 V5.4.1 EN 301 908-1 V6.2.1 EN 300440-1 V1.6.1/ EN 300440-2 V1.4.1 (EC) 278/2009 IEC 62321:2013 2.
To minimize the environmental impacts and take more responsibilities to the earth we live on, this document shall serve as a formal declaration that the ZTE Blade C2 Plus manufactured by ZTE CORPORATION is in compliance with the Directive 2011/65/EU of the European Parliament - RoHS (Restriction of Hazardous Substances) with respect to the following substances: 1.
Lead (Pb) Mercury (Hg) Cadmium (Cd) Hexavalent Chromium (Cr (VI)) Polybrominated biphenyls (PBBs) 6.
Polybrominated diphenyl ethers (PBDEs) The ZTE Blade C2 Plus manufactured by ZTE CORPORATION meets the requirements of EU 2011/65/EU. This declaration is the responsibility of the manufacturer: ZTE Corporation ZTE Plaza, Keji Road South, Hi-Tech, Industrial Park,Nanshan District, Shenzhen, Guangdong, 518057, P.R.China Authorised person signing for the company: Xu Feng Quality Director Of ZTE Corporation Name in block letters & position in the company Shenzhen, 21 May 2014 Place & date Legally valid signature
* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project