Eiki | EK-812U | manual | EIKI EK-812U Manual

EIKI EK-812U Manual
Owner’s Manual
Multimedia Projector
Model EK-812U/EK-818U
(Projection lens is optional.)
Preface
Features and Design
This Multimedia Projector is designed with the most advanced technology for portability, durability, and
ease of use. This projector utilizes a high luminance and Eco friendly system, a palette of 1.07 billion
colors, and digital light processing (DLP) technology.
Simple Computer System Setting
LAN Network Function
The projector has the Multi-scan system to
conform to almost all computer output signals
quickly. Up to WUXGA resolution can be
accepted.
This projector is loaded with the Wired LAN
network function. You can operate and manage
the projector via network.
For details, refer to pages 41-42 and 45-51.
Useful Functions for Presentations
The power zoom function allows you to focus on
the crucial information during a presentation.
Laser Diode Control
Brightness of the projection laser diode can be
manually selected (Constant Power, Constant
Luminance, or Eco Mode).
Auto Source Function
This function enables auto input search and auto
signal adjustment simply by pressing the Auto
button on the remote control.
Power Management
The Power management function reduces
power consumption and maintains the laser
diode life.
Background Color Function
The Background Color function allows you to
specify the screen background (“Logo”, “Blue”,
“Black”, or “White” screen) when no signal is
available.
4K Compatible
This projector supports HDMI 2.0, which plays
true 4K videos at 50 and 60 frames per second,
without any compromise on the image quality.
For details, refer to page 38.
Multilanguage Menu Display
Operation menu is available in 13 languages;
English, French, Spanish, German, Italian,
Russian, Simplified Chinese, Japanese, Korean,
Portuguese, Indonesian, Dutch, and Arabic.
Security Function
The Security function helps you ensure security
of the projector.
HDR (High Dynamic Range)
This projector is compatible with HDR content.
HDR allows the projector to show image with
higher dynamic range, expanding the range of
contrast ratio and color for a more natural and
realistic image.
Note:
The screen menu and pictures in the manual may slightly differ from the real product.
The manual is subject to change without prior notice.
—i—
DLP Projector — Owner’s Manual
Copyright
This publication, including all photographs, illustrations and software, is protected under international
copyright laws, with all rights reserved. Neither this manual, nor any of the material contained herein, may
be reproduced without written consent of the author.
© Copyright 2019
Disclaimer
The information in this document is subject to change without notice. The manufacturer makes no
representations or warranties with respect to the contents hereof and specifically disclaims any implied
warranties of merchantability or fitness for any particular purpose. The manufacturer reserves the right to
revise this publication and to make changes from time to time in the content hereof without obligation of
the manufacturer to notify any person of such revision or changes.
Trademark Recognition
All other product names used in this manual are the properties of their respective owners and are
acknowledged.
—
ii —
Preface
Important Safety Information
Important:
It is strongly recommended that you read this section carefully before using the projector. These safety
and usage instructions will ensure that you enjoy many years of safe use of the projector. Keep this
manual for future reference.
Symbols Used
Warning symbols are used on the unit and in this manual to alert you of hazardous situations. The
following styles are used in this manual to alert you to important information.
Note:
Provides additional information on the topic at hand.
Important:
Provides additional information that should not be overlooked.
Caution:
Alerts you to situations that may damage the unit.
Warning:
Alerts you to situations that may damage the unit, create a hazardous environment, or cause personal
injury.
Throughout this manual, component parts and items in the OSD menus are denoted in bold font as in this
example:
“Push the Menu button on the remote control to open the Main menu.”
General Safety Information
¾¾ Do not open the unit case. There are no user-serviceable parts in the unit. For servicing, contact
qualified service personnel.
¾¾ Follow all warnings and cautions in this manual and on the unit case.
¾¾ The projection laser diode is extremely bright by design. To avoid damage to eyes, do not look into the
lens when the laser diode is on.
¾¾ Do not place the unit on an unstable surface, cart, or stand.
¾¾ Avoid using the system near water, in direct sunlight, or near a heating device.
¾¾ Do not place heavy objects such as books or bags on the unit.
—
iii —
DLP Projector — Owner’s Manual
Safety Instructions
• Please read this manual completely before installing and operating the projector.
• The projector provides many convenient features and functions. Proper operation may enable you to
fully utilize the features and keep it in good condition. Otherwise, it will not only shorten the service life
of the unit, but also may cause malfunction, a fire, or other accidents.
• If your projector cannot work properly, please read this manual again, check the operating methods and
cable connection, and try the solutions in the part of Troubleshooting. If the problem still exists, contact
the dealer or the service center.
Caution:
ELECTRIC SHOCK DO NOT OPEN
Caution:
To reduce the risk of electric shock, do not remove cover (or back), no user serviceable parts
inside. Refer servicing to qualified service personnel.
This symbol indicates that dangerous voltage constituting a risk of electric shock is present
within this unit.
This symbol indicates that there are important operating and maintenance instructions in the
user’s manual with this unit.
FOR EU USERS
The symbol mark and recycling systems described below apply to EU countries and do not apply to
countries in other areas of the world.
Your product is designed and manufactured with high quality materials and components which can be
recycled and/or reused.
The symbol mark means that electrical and electronic equipment, batteries and accumulators, at their
end-of-life, should be disposed of separately from your household waste.
Note:
If a chemical symbol is printed beneath the symbol mark, this chemical symbol means that the battery
or accumulator contains a heavy metal at a certain concentration. This will be indicated as
follows: Hg: mercury, Cd: cadmium, Pb: lead In the European Union there are separate
collection systems for used electrical and electronic equipment, batteries and accumulators.
Please, dispose of them correctly at your local community waste collection/recycling centre.
Please help us to conserve the environment we live in!
—
iv —
Preface
Safety Precautions
Caution:
•
•
The projector must be grounded.
Do not expose the projector to raindrops or high humidity to avoid a fire or electric shock.
≥ 1m
(≥ 39.4”)
• This projector produces intense light from the projection lens. Avoid staring directly into the lens,
otherwise eye damage could be caused. Be especially careful that children do not stare directly into the
beam.
• Place the projector in a proper position. Otherwise it may result in fire hazard.
• Leave an appropriate space from the top, sides, and back of the shell in order to ventilate and cool
down the projector. The figures below indicate the minimum distance to be left. It must be satisfied if the
projector is placed in sealed environment like a cabinet.
≥ 1m
(≥ 39.4”)
≥ 1m
(≥ 39.4”)
≥ 1m
(≥ 39.4”)
• Do not cover the vent of the projector. Poor radiation may shorten the service life or even cause
dangers.
• Remove the AC power plug if the projector is not to be used for a long time.
Caution:
•
•
•
Do not set the projector in greasy, wet, or smoky conditions such as in a kitchen, to prevent a
malfunction or accident. If the projector comes in contact with oil or chemicals, it may become
deteriorated.
Read and keep this manual for future reference.
The mains plug/appliance coupler is used as disconnect device, the disconnect device shall remain
readily operable.
—
v—
DLP Projector — Owner’s Manual
Safety Guide
• All the safety and operating instructions should be read before the product is operated.
• Read all of the instructions given here and retain them for later use. Unplug this projector from AC
power supply before cleaning. Do not use liquid or aerosol cleaners.
• Use a damp cloth for cleaning.
• Follow all warnings and instructions marked on the projector.
• For added protection to the projector during a lightning storm, or when it is left unattended and unused
for long periods of time, unplug it from the wall outlet. This will prevent damage due to lightning and
power line surges.
• Do not expose this unit to rain or use near water, for example, in a wet basement, near a swimming
pool, etc.
• Do not use attachments not recommended by the manufacturer as they may cause hazards.
• Do not place this projector on an unstable cart, stand, or table. The projector may fall, causing
serious injury to a child or an adult, and serious damage to the projector.
• Use only with a cart or stand recommended by the manufacturer, or sold with the projector.
Wall or shelf mounting should follow the manufacturer’s instructions, and should use a mounting kit
approved by the manufacturers.
• An appliance and cart combination should be moved with care. Quick stops, excessive force, and
uneven surfaces may cause the appliance and cart combination to overturn.
• Slots and openings in the back and bottom of the cabinet are provided for ventilation, to ensure reliable
operation of the equipment and to protect it from overheating.
• The openings should never be covered with cloth or other materials, and the bottom opening should not
be blocked by placing the projector on a bed, sofa, rug, or other similar surface. This projector should
never be placed near or over a radiator or heat register.
• This projector should not be placed in a build-in installation such as a book case unless proper
ventilation is provided.
• Never push objects of any kind into this projector through cabinet slots as they may touch dangerous
voltage points or short out parts that could result in a fire or electric shock. Never spill liquid of any kind
on the projector.
• Do not install the projector near the ventilation duct of air-conditioning equipment.
• This projector should be operated only from the type of power source indicated on the marking label.
• If you are not sure of the type of power supplied, consult your authorized dealer or local power
company.
• Do not overload wall outlets and extension cords as this can result in fire or electric shock. Do not allow
anything to rest on the power cord. Do not locate this projector where the cord may be damaged by
persons walking on it.
• Do not attempt to service this projector yourself as opening or removing the covers may expose you to
dangerous voltage or other hazards. Refer all servicing to qualified service personnel.
• Unplug this projector from wall outlet and refer servicing to qualified service personnel under the
following conditions:
¾¾ When the power cord or plug is damaged or frayed.
¾¾ If liquid has been spilled into the projector.
¾¾ If the projector has been exposed to rain or water.
¾¾ If the projector does not operate normally by following the operating instructions. Adjust only those
controls that are covered by the operating instructions as improper adjustment of other controls
may result in damage and will often require extensive work by a qualified technician to restore the
projector to normal operation.
¾¾ If the projector has been dropped or the cabinet has been damaged.
—
vi —
Preface
¾¾ When the projector exhibits a distinct change in performance - this indicates a need for service.
• When replacement parts are required, be sure the service technician has used replacement parts
specified by the manufacturer that have the same characteristics as the original part. Unauthorized
substitutions may result in fire, electric shock, or injury to persons.
• Upon completion of any service or repairs to this projector, ask the service technician to perform routine
safety checks to determine that the projector is in safe operating condition.
Information for users in the European Union
This is a device to project images onto a screen, etc., and is not intended for use as indoor lighting in a
domestic environment.
Directive 2009/125/EC.
Warning:
Do not aim a laser pointer at the lens aperture, which may damage the DMD in the projector and cause
personal injury.
We are not responsible for the hurt and damage caused by the improper use of laser pointer even in
warranty period.
Air circulation
Vents in the cabinet are provided for ventilation. To ensure reliable operation of the product and to protect
it from overheating, these openings must not be blocked or covered.
Caution:
•
•
•
•
•
•
•
Hot air is exhausted from the exhaust vent. When using or installing the projector, the following
precautions should be taken.
Do not put any flammable objects, or spray can near the projector. Hot air is exhausted from the air
vents.
Keep the exhaust vent at least 1m away from any objects.
Do not touch a peripheral part of the exhaust vent, especially screws and metallic part. This area will
become hot while the projector is being used.
Do not put anything on the projector. Objects put on the cabinet will not only get damaged but also
may cause fire hazard by heat.
Cooling fans are provided to cool down the projector.
The fan’s running speed is changed according to the temperature inside the projector.
Air Intake Vent
Exhaust Vent
—
vii —
DLP Projector — Owner’s Manual
Moving the projector
When moving the projector, take care of the lens and retract the adjustable foot to prevent damage to the
lens and cabinet.
Caution in moving or transporting the projector
•
•
•
Do not drop or bump the projector, otherwise damages or malfunctions may result.
When carrying the projector, use a suitable carrying case.
Do not transport the projector by courier or any other transport service in an unsuitable transport
case. This may cause damage to the projector. For information about transporting the projector by
courier or any other transport service, consult your dealer.
Installing the projector properly
• Please set the projector on nearly-level.
• Be sure to install the projector properly. Improper installation may reduce the laser diode lifetime and
even cause a fire hazard.
• 360 degree free orientation operation.
• When installing multiple projectors, keep at least 1 cm (39.4”) space between the adjacent projectors.
1m (39.4”)
Outtake
Intake
Outtake
Intake
• For ceiling mount installations, make sure to leave 30 mm (1.2”) between the ceiling mount and the
bottom intake vents of the projector.
Bottom intake vents
Ceiling mount plate
30 mm
(1.2”)
—
viii —
Preface
• Please ensure the screws used to attach a mount to the projector meet the specifications: M6x4, 10mm.
140mm
140mm
310mm
310mm
M6 x 4
10mm
280mm
Caution in ceiling installation the projector
•
•
•
•
•
•
Only qualified personal is authorized for ceiling installation.
We are not responsible for the hurt and damage caused by ceiling bracket that purchased from
unauthorized dealer even in warranty period.
Remove the ceiling bracket immediately while not use.
While installing, torque screwdriver is suggested, don’t use electric or impact-type screwdriver.
Please read the manual of bracket for details.
The bracket is subject to change without notice.
—
ix —
DLP Projector — Owner’s Manual
Important Information
Laser Safety Cautions
This product is classified as CLASS 1 LASER PRODUCT - RISK GROUP 2 of IEC 60825-1:2014 and also
complies with 21 CFR 1040.10 and 1040.11 except for conformance as a Risk Group 2 LIP as defined in
IEC 62471-5:Ed. 1.0. For more information see Laser Notice No. 57, dated May 8, 2019.
IEC/EN 60825-1:2014 CLASS 1 LASER PRODUCT RISK GROUP 2
Complies with 21 CFR 1040.10 and 1040.11 except for conformance as a Risk
Group 2 LIP as defined in IEC 62471-5:Ed. 1.0. For more information see Laser
Notice No. 57, dated May 8, 2019.
IEC/EN 60825-1:2014 PRODUIT LASER DE CLASSE 1 GROUPE DE RISQUE 2
Conforme aux normes 21 CFR 1040.10 et 1040.11, à l'exception de la conformité
en tant que LIP du groupe de risque 2 définie dans la CEI 62471-5: Ed. 1,0. Pour
plus d'informations, voir l'avis au laser n ° 57 du 8 mai 2019.
IEC/EN 60825-1:2014 1類激光產品RG2危險等級
除了IEC 62471-5:Ed.1.0中定義的RG2 LIP 危險等級以外,要符合21 CFR 1040.10和
1040.11,更多相關資訊,請參閱2019年5月8日的第57號激光公告。
IEC/EN 60825-1:2014 1类激光产品RG2危险等级
除了IEC 62471-5:Ed.1.0中定义的RG2 LIP 危险等级以外,要符合21 CFR 1040.10和
1040.11,更多相关信息,请参阅2019年5月8日的第57号激光公告。
• This projector has built-in Class 4 laser module. Disassembly or modification is very dangerous and
should never be attempted.
• Any operation or adjustment not specifically instructed in the user’s guide creates the risk of hazardous
laser radiation exposure.
• Do not open or disassemble the projector as this may cause damage by the exposure of laser radiation.
• Do not stare into beam when the projector is on. The bright light may result in permanent eye damage.
• When turning on the projector, make sure no one within projection range is looking at the lens.
• Without following the control, adjustment or operation procedure may cause damage by the exposure of
laser radiation.
• Adequate instructions for the assembly, operation, and maintenance, including clear warnings
concerning precautions to avoid possible exposure to laser.
• IEC 60825-1: 2014 Class 1 RG2
• IEC 62471-5:2015 RG2
• Additional instructions to supervise children, no staring, and not use optical aids.
• Additional instructions to install above the reach of children.
• Notice is given to supervise children and to never allow them to stare into the projector beam at any
distance from the projector.
• Notice is given to use caution when using the remote control for starting the projector while in front of
the projection lens.
• Notice is given to the user to avoid the use of optical aids such as binoculars or telescopes inside the
beam.
• Do not stare into the beam, RG2.
As with any bright source, do not stare into the beam, RG2 IEC 62471-5:2015.
RG2
—
x—
Preface
• “WARNING: MOUNT ABOVE THE HEADS OF CHILDREN.” The use of a ceiling mount is
recommended with this product to place it above the eyes of children.
Compliance
FCC Caution
Note: This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses, and can radiate radio
frequency energy, and if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Use of shielded cable is required to comply with class A limits in Subpart B of Part 15 of FCC Rules.
Do not make any changes or modifications to the equipment unless otherwise specified in the instructions.
If such changes or modifications should be made, you could be required to stop operation of the
equipment.
Model Number : EK-812U/EK-818U
Trade Name : EIKI
Responsible party : EIKI International, Inc.
Address : 30251 Esperanza Rancho Santa Margarita CA 92688-2132
Telephone No. : 800-242-3454 (949-457-0200)
Canadian Radio Interference Regulations:
This digital apparatus meets all requirements of the Canadian ICES-003.
*See the rating label on the projector if class A or B.
Note:
For use in a commercial, industrial or business environment.
Not for domestic use.
—
xi —
DLP Projector — Owner’s Manual
AC Power Cord Requirement
The AC Power Cord supplied with this projector meets the requirement for use in the country you
purchased it.
AC Power Cord for the United States and Canada:
AC Power Cord used in the United States and Canada is listed by the Underwriters Laboratories (UL) and
certified by the Canadian Standard Association (CSA).
AC Power Cord has a grounding-type AC line plug. This is a safety feature to be sure that the plug will fit
into the power outlet. Do not try to defeat this safety feature. Should you be unable to insert the plug into
the outlet, contact your electrician.
Warning:
A plug with bared flexible cord is hazardous if engaged in a live socket outlet.
The Wires in this mains lead are coloured in accordance with the following code:
• Green-and-yellow ......... Earth
• Blue .............................. Neutral
• Brown ........................... Live
As the colours of the wires in the mains lead of this apparatus may not correspond with the coloured
markings identifying the terminals in your plug proceed as follows:
• The wire which is coloured green-and-yellow must be connected to the terminal in the plug which is
marked by the letter E or by the safety earth symbol or coloured green or green-and-yellow.
• The wire which is coloured blue must be connected to the terminal which is marked with the letter N or
coloured black.
• The wire which is coloured brown must be connected to the terminal which is marked with the letter L or
coloured red.
Warning:
This apparatus must be earthed.
Note:
The socket-outlet should be installed near the equipment and easily accessible.
—
xii —
Preface
Contents
GETTING STARTED................................................................................................................. 1
Packing Checklist...................................................................................................................... 1
Views of Projector Parts.......................................................................................................... 2
Front-right View......................................................................................................................................2
Rear View...............................................................................................................................................3
Built-in Keypad........................................................................................................................................4
Bottom View............................................................................................................................................5
Remote Control Parts . ............................................................................................................ 6
Remote Control Operating Range. ............................................................................................ 8
Projector and Remote Control Buttons................................................................................... 8
Remote Control Code. .............................................................................................................. 8
Inserting the Remote Control Batteries ................................................................................... 9
SETUP AND OPERATION ..................................................................................................... 10
Installing the Projection Lens................................................................................................. 10
Starting and Shutting down the Projector.............................................................................. 12
Turn the Projector On...........................................................................................................................12
Turn the Projector Off...........................................................................................................................12
Adjusting the Projector Level. ............................................................................................... 13
Adjusting the Zoom, Focus, and Keystone................................................................................ 14
Using the Lens Shift Adjustment.............................................................................................. 15
Vertical / Horizontal Lens Shift..............................................................................................................15
Optional Lenses and Projection Size. ...................................................................................... 17
Projection Lens.....................................................................................................................................17
Projection Size v.s Throw Distance......................................................................................................19
ON-SCREEN DISPLAY (OSD) MENU SETTINGS ................................................................ 20
OSD Menu Controls............................................................................................................... 20
Navigating the OSD..............................................................................................................................20
Setting the OSD Language...................................................................................................... 21
OSD Menu Overview................................................................................................................ 22
Picture Menu........................................................................................................................... 30
3D Display Menu..................................................................................................................................31
HSG Adjustment Menu.........................................................................................................................32
Advanced Menu....................................................................................................................................33
Output Menu............................................................................................................................ 34
Image Warping Menu...........................................................................................................................35
PIP/PBP Menu......................................................................................................................................36
—
xiii —
DLP Projector — Owner’s Manual
Setup Menu.............................................................................................................................. 38
Lens Function Menu.............................................................................................................................39
Menu Preferences Menu......................................................................................................................40
PIN Menu..............................................................................................................................................40
Communications Menu.........................................................................................................................41
Option Menu. ........................................................................................................................... 42
Power Settings Menu............................................................................................................................43
Light Source Settings Menu..................................................................................................................44
Control Your Projector Using Web Browser......................................................................... 45
Wired LAN Terminal functionalities.......................................................................................................45
Supported External Devices.................................................................................................................45
LAN_RJ45............................................................................................................................................45
RS232 by Telnet Function.....................................................................................................................49
MAINTENANCE AND SECURITY ......................................................................................... 52
Replacing the Projection Lens................................................................................................. 52
Cleaning the Projector........................................................................................................... 53
Cleaning the Lens.................................................................................................................................53
Cleaning the Case................................................................................................................................53
Using the Kensington® Lock..................................................................................................... 54
TROUBLESHOOTING ........................................................................................................... 55
Common Problems and Solutions. ............................................................................................ 55
Tips for Troubleshooting......................................................................................................... 55
LED Error Messages. ............................................................................................................. 56
Image Problems........................................................................................................................ 57
Laser Diode Problems.............................................................................................................. 57
Remote Control Problems....................................................................................................... 58
Having the Projector Serviced................................................................................................ 58
HDMI Q & A............................................................................................................................. 59
SPECIFICATIONS .................................................................................................................. 60
Specifications........................................................................................................................... 60
Projection Distance vs. Projection Size.................................................................................. 61
Projection Distance and Size Table......................................................................................................61
Timing Mode Table.................................................................................................................... 62
Projector Dimensions.............................................................................................................. 66
—
xiv —
Preface
REGULATORY COMPLIANCE .............................................................................................. 67
FCC Warning........................................................................................................................... 67
Canada..................................................................................................................................... 67
Safety Certifications............................................................................................................... 67
—
xv —
DLP Projector — Owner’s Manual
Getting Started
Packing Checklist
Carefully unpack the projector and check that the following items are included:
DLP PROJECTOR
F
OF
EK-812U & EK-818U series
Quick Start Guide
ON
3
2
1
6
5
4
7
Info
1
9
8
Safety Guide
Safety Guide
ON
OFF
1
2
4
Mode
2
3
5
7
6
8
9
0
Info
1
0
Mode
Auto
Source
Enter
EK-812U & EK-818U series
Quick Start Guide
Menu
Exit
Gamma Bright
Cont.
Lens H
PIP
Focus
Lens V
Keystone H
Source
Zoom
Keystone V
Shutter
(AV Mute)
Hot Key
Pattern
(Projection lens is optional.)
Auto
2
ter
En
Exit
Menu
a
Gamm
PIP
Cont.
Bright
3
us
Foc
sH
Len
sV
Len
m
Zoo
H
one
yst
Ke
one
yst
Ke
tter
Shu Mute)
(AV
tern
V
Hot
Pat
4
Key
ON
ON
OFF
1
2
4
3
5
7
6
8
9
0
Info
Mode
Auto
Source
Enter
Menu
Exit
Gamma Bright
Cont.
Lens H
PIP
Focus
Lens V
Keystone H
Zoom
Keystone V
Shutter
(AV Mute)
REMOTE CONTROL
VGA CABLE
POWER CORD
Hot Key
Pattern
QUICK START GUIDE
* For other regions except China:
POWER CORD x 2 (US and EU)
(WITH TWO AAA
BATTERIES)
* For China: POWER CORD x 1
Safety Guide
Safety Guide
EK-812U
EK-818U
1
LENS COVER
LENS COVER
* For A01, A03, and A13 lens
* For A06 lens
2
CD-ROM
(THIS OWNER’S MANUAL)
for China
SAFETY GUIDE
QC PASS CARD
for China
WARRANTY CARD
for China
ṏ⑩ᷕ㚱㭺㚱⭛䈑峐ㆾ⃫䳈䘬⎵䦘⍲⏓濌濪堐
ὅ㌖ᷕ⚥㓧⹄搰⮡“䓝⫸ᾉ〗ṏ⑩㰉㝻㍏⇞䭉瀲 ≆㱽炱ᷢ㍏⇞␴ⅷ⮹䓝⫸ᾉ〗ṏ⑩⹇⺫⎶⮡䍗⠫忈ㆸ䘬㰉㝻炻Ὣ 徃
䓇ṏ␴撨ⓖỶ㰉㝻䓝⫸ᾉ〗ṏ⑩炻ᾅ㉌䍗⠫␴Ṣỻ‍⹟炻 ṭ㍸ὃ㚱ℛ㛔ṏ⑩⎗傥⏓㚱㚱㭺⍲㚱⭛䈑 峐⤪⎶烉
悐ẞ⎵䦘
‫ݹ‬ᵪᕅ᫾(䬍ᡆ䬍䭱ਸ䠁)
䮌ཤ
⚟⌑
⛩⚟ಘ
ᕩ⡷(ᘛࡺ⼧䬌)
仾ᡷ㓴Ԧ
㚱㭺㚱⭛䈑峐ㆾ⃫䳈
摭炷Pb˅ 㰆炷Hg˅ 擱炷Cd˅
X
X
X
X
X
X
O
O
X
O
O
O
O
O
瀟ẟ撔炷Cr(VI)˅
O
O
O
O
⣂㹜俼劗炷PBB˅
⣂㹜Ḵ劗慂炷PBDE˅
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
⚟⌑ⴆ‫؍‬ᣔᔰ‫ޣ‬
O
O
X
O
O
⑙ᓖᔰ‫ޣ‬
O
O
X
O
O
สᶯ㓴Ԧ
㔶㓯,㓯ᶀ
X
O
O
O
O
O
X
O
O
O
O
O
O
O
⭥Ⓚ㓯
X
O
O
O
O
O
⭥Ⓚᨂᓗ㓴Ԧ
䠁኎Ԧ(ᘛࡺ⼧䬌,䬌䪹ㅹ)
X
O
O
O
O
O
X
O
O
O
O
O
X
O
O
O
O
䚕᧗ಘ
˕烉堐䣢宍㚱㭺㚱⭛䈑峐⛐宍悐ẞ㇨㚱⛯峐㛸瀌ᷕ䘬⏓濌⛯⛐SJ/T11363-2006㞯Ⅾ奬⭂䘬旸濌天㯪ẍᶳˤ
O
ʹ烉堐䣢宍㚱㭺㚱⭛䈑峐军⮹⛐宍悐ẞ䘬㝸ᶨ⛯峐㛸瀌ᷕ䘬⏓濌崭↢SJ/T11363-2006㞯Ⅾ奬⭂䘬旸濌天㯪ˤ
⢯㲐烉戜Ḷ㫏䚇ᶶᷕ⚥⮡ḶRoHS䘬澵⎴奬⭂炻㛔㈽⼙㛢ṏ⑩䫎⎰㫏䚇RoHS㊯濶(䓝㮼ˣ䓝⫸学⢯ᷕ旸⇞ἧ䓐㝸ṃ㚱⭛䈑峐㊯濶), 㛔
堐ᷕ㞯㚱"X"䘬㇨㚱悐ẞ⛯ᷢ㫏䚇ROHS㊯濶㇨⃩孠瀃⢾䘬悐ẞˤ
WARRANTY CARD
for USA
RoHS CARD
for China
Contact your dealer immediately if any items are missing, appear damaged, or if the unit does not work. It
is recommend that you keep the original packing material should you ever need to return the equipment
for warranty service.
Note:
•
Avoid using the projector in dusty environments.
—
1—
DLP Projector — Owner’s Manual
Views of Projector Parts
Front-right View
3
4
2
1
5
6
Item
Label
Description
See page
1
Projection Lens
Allows automated lens control and adjustment: vertical and
horizontal offsets, zoom and focus.
-
2
Front IR Sensor
8
3
Top IR Sensor
Receives signals from the IR remote. Keep the signal path to
the sensor unobstructed for uninterrupted communication with
the projector.
4
LED Status
Indicators
Displays the status of the projector.
56
5
Cooling Air Vents Keep these vents unobstructed to prevent the projector from
overheating.
(Intake)
6
Adjustable Feet
Raise or lower the feet to level the projector.
13
Important:
Ventilation openings on the projector allow for good air circulation, which keeps the projector laser
diode cool. Do not obstruct any of the ventilation openings.
—
2—
DLP Projector — Owner’s Manual
Rear View
1
2
12V OUT
Max. 0.35A
REMOTE IN
3
4
6
8
7
9
DVI-D
HDBaseT
LAN
5
HDMI1
VGA IN
3G-SDI IN
HDMI2
USB POWER OUT
(5V Max. 0.5A)
3D SYNC IN
10
3D SYNC
OUT
VGA OUT
RS-232C
11
19
Item
18
17 16 15 14
Label
13
12
Description
See page
1
REMOTE IN
Connect to the remote control wired terminal for serial control
projector.
-
2
12V OUT
Connect to provide 12V DC power to an accessory when the 12V
trigger is set to On.
-
3
HDBaseT
Connect a RJ45 Cat5/Cat6 Ethernet cable to input uncompressed
high-definition video control signals.
-
4
HDMI1
Connect the HDMI cable from a HDMI device.
-
5
USB POWER OUT Connect the WIFI dongle.
-
6
HDMI2
Connect the HDMI cable from a HDMI device.
-
7
DVI-D
Connect to DVI source.
-
8
3G-SDI IN
Connect the coaxial cable with BNC connector from a 3G-SDI
device.
-
9
VGA IN
Connect the VGA cable from a computer or component device.
-
10
VGA OUT
Connect the VGA cable to a display.
-
11
RS-232C
Connect RS-232C serial port cable for remote control.
12
Power Switch
Switch the power button to turn on/off the power source.
12
-
13
AC Input
Connect to the supplied power adapter.
12
14
Kensington Lock
Use to secure the projector to countertops, tables, etc.
54
15
3D SYNC OUT
Connect the 3D IR glasses transmitter.
(Note: For Specific 3D IR glasses only)
-
16
Security Bar
Use to secure the projector.
-
17
3D SYNC IN
Connect to the 3D IR synchronization signal transmitter.
-
18
LAN
Connect a LAN cable from Ethernet.
-
19
Built-in Keypad
Control the projector.
4
Note:
•
•
To use this feature, you must plug in the power adapter/cable/cord before turn on/off the projector.
Do not use this jack for anything other than intended use.
Warning:
As a safety precaution, disconnect all power to the projector and connecting devices before making
connections.
—
3—
DLP Projector — Owner’s Manual
Built-in Keypad
1
2
3
4
9
8
7
Item
6
Label
5
Description
See page
1
Power
Turn the projector on or off.
12
2
Menu
Display menus.
20
3
Exit
Return to previous level or exit menus if at top level.
20
4
Source
Select an input for the main or PIP/PBP image.
5
Enter
•
•
Select a highlighted menu item.
Change or accept a value.
20
6
Arrow keys
•
•
Adjust a setting UP or DOWN.
Navigate within a menu.
20
7
Zoom
Adjust zoom.
14
8
Focus
Adjust focus.
14
9
Lens
Adjust the lens vertical or horizontal offset setting.
—
4—
-
15-18
DLP Projector — Owner’s Manual
Bottom View
1
140mm
140mm
1
310mm
2
310mm
2
2
2
280mm
1
Item
Label
Description
1
Adjustable Feet
Raise or lower the feet to level the projector.
2
Ceiling support
holes
Contact your dealer for information on mounting the projector on
a ceiling.
See page
13
-
Note:
•
•
•
When installing, ensure that you use only UL Listed ceiling mounts.
For ceiling installations, use approved mounting hardware and M6 screws with a maximum screw
depth of 10 mm (0.39 inch).
The construction of the ceiling mount must be of a suitable shape and strength. The ceiling mount
load capacity must exceed the weight of the installed equipment, and as an additional precaution
be capable of withstanding three times the weight of the equipment (not less than 71.4 kg) over a
period of 60 seconds.
—
5—
DLP Projector — Owner’s Manual
Remote Control Parts
ON
OFF
1
16
1
2
3
4
5
6
7
8
9
3
Info
0
Mode
17
4
Auto
Source
18
Exit
19
2
5
Enter
6
7
8
Menu
Gamma Bright
Cont.
PIP
9
10
20
21
Lens H
Focus
22
Zoom
23
Pattern
24
11
Lens V
12
Keystone H
13
Keystone V
14
Shutter
(AV Mute)
Hot Key
15
Important:
1. Avoid using the projector with bright fluorescent lighting turned on. Certain high-frequency fluorescent
lights can disrupt remote control operation.
2. Be sure nothing obstructs the path between the remote control and the projector. If the path between
the remote control and the projector is obstructed, you can bounce the signal off certain reflective
surfaces such as projector screens.
3. The buttons and keys on the projector have the same functions as the corresponding buttons on the
remote control. This owner’s manual describes the functions based on the remote control.
Note:
Complies with FDA performance standards for laser products except for deviations pursuant to
Laser Notice No. 50, dated June 24, 2007.
—
6—
DLP Projector — Owner’s Manual
Item
Label
Description
See page
1
Power on
Turn projector ON.
12
2
Number Keys
Enter a number (such as PIN code) or source hotkey.
Source Hotkey Key:
1: HDMI 1
2: HDMI 2
3: DVI-D
4: VGA
5: HDBaseT
6: 3G-SDI
-
3
Info
Display image information.
-
4
Auto
Automatically optimize image.
-
5
Enter
•
•
Select a highlighted menu item.
Change or accept a value.
20
6
Arrow Keys
•
•
Adjust a setting UP or DOWN.
Navigate within a menu.
20
7
Menu
Display menus.
8
Gamma
Adjust mid-range levels.
-
9
Bright
Adjust amount of light in the image.
-
10
Lens H
Adjust the position of the image horizontally.
-
20
11
Lens V
Adjust the position of the image vertically.
12
Keystone H
Adjust the horizontal keystone.
35
-
13
Keystone V
Adjust the vertical keystone.
35
14
Shutter
(AV Mute)
Display or blank the video image.
-
15
Hot Key
Select your preset keys quickly.
-
16
OFF
Turn OFF projector.
17
Mode
Select the preset display mode.
-
18
Source
Select an input for the main or PIP/PBP image.
-
19
Exit
Return to previous level or exit menus if at top level.
20
PIP
Turn PIP/PBP ON/OFF.
-
21
Cont.
Adjust difference between dark and light.
-
22
Focus
Adjust focus to improve image clarity as desired.
14
23
Zoom
Adjust zoom to achieve a desired image size.
14
24
Pattern
Display a test pattern.
12
20
-
Caution:
Use of controls, adjustments or performance of procedures other than those specified herein may result
in hazardous laser light exposure.
—
7—
DLP Projector — Owner’s Manual
Remote Control Operating Range
The remote control uses infrared transmission to control the projector. It is not necessary to point the
remote directly at the projector. Provided you are not holding the remote perpendicular to the sides or
the rear of the projector, the remote will function well within a radius of about 7 meters (23 feet) and 15
degrees above or below the projector level. If the projector does not respond to the remote control, move
a little closer.
Projector and Remote Control Buttons
The projector can be operated using the remote control or the buttons on the rear of the projector. All
operations can be carried out with the remote control; however, the buttons on the projector are limited in
use.
Remote Control Code
The ten different remote control modes (Code 0- Code 9) are assigned to this projector. Switching the
remote control codes prevents interference from other remote controls when several projectors or video
equipment next to each other are being operated at the same time. Change the remote control code for
the projector first before changing that for the remote control. See “Communications menu” on page 42.
To change the code for the Remote Control:
Press and hold the Mode button and a number button (0-9) on the remote control for more than three
seconds to switch among the codes.
Default setting: 0
To change the Projector Address for the projector:
Select a Projector Address in the Setup Menu. (SETUP → Communications → Projector Address)
—
8—
DLP Projector — Owner’s Manual
Inserting the Remote Control Batteries
1. Remove the battery compartment cover as shown in the
illustration.
2. Insert the batteries with correct polarity (+/-) as shown inside
the battery compartment.
3. Replace the cover.
Caution:
•
•
•
Only use AAA batteries (Alkaline batteries are recommended).
Dispose of used batteries according to local ordinance regulations.
Remove the batteries when not using the projector for prolonged periods.
—
9—
DLP Projector — Owner’s Manual
Setup and Operation
Installing the Projection Lens
Before setting up the projector, install the projection lens on the projector.
Important:
•
•
Before installation, check where the projector is used and prepare a suitable lens.
For details, contact the sales dealer where you purchased the projector.
1. Press “ ” on the built-in keypad or press “ ” on the remote control twice to turn off the projector.
2. Rotate the lens cap counter-clockwise. Then remove the lens cap.
3. Remove both lens caps (front and back) on the lens.
4. With the label “TOP” on the lens assembly facing up, install
the assembly into the lens mount.
—
10 —
DLP Projector — Owner’s Manual
5. Rotate the lens clockwise to lock the lens in place.
6. Firmly install the lens cover onto the lens.
—
11 —
DLP Projector — Owner’s Manual
Starting and Shutting down the Projector
Turn the Projector On
1. Connect the power cord to the projector. Then connect the other end to a wall outlet.
The Power button on the built in keypad is illuminated.
Important:
Make sure that the Power switch is in the ON position.
2. Turn on the connected devices.
3. Turn on the projector by pressing “
” on the remote control
or press “ ” on the built-in keypad. The Status LED is
Orange with a long blink.
The projector splash screen displays and connected
devices are detected.
4. If more than one input device is connected, press the Source key on the remote control to select an
input source (HDMI1, HDMI2, DVI-D, VGA, HDBaseT, or 3G-SDI).
5. The projector detects the source you selected and displays the image.
Turn the Projector Off
1. Press “
” on the built-in keypad or press “ ” on the remote control to turn off the projector. A warning
message will appear on the displayed image.
2. Press “
” on the built-in keypad or press “ ” on the remote control again to confirm your selection. If
you do not press “ ” or “ ” again, the warning message will disappear after 10 seconds.
Caution:
Do not unplug the power cord until all of fans are stop–indicating the projector has cooled down.
—
12 —
DLP Projector — Owner’s Manual
Adjusting the Projector Level
Take note of the following when setting up the projector:
• The projector table or stand should be level and sturdy.
• Position the projector so that it is perpendicular to the screen.
• Ensure the cables are in a safe location. You could trip over them.
A
B
1. To raise the level of the projector, lift the projector
A
.
2. Locate the adjustable foot you wish to modify on the underside of the projector.
3. Rotate the adjustable foot clockwise to raise the projector or counter-clockwise to lower it. Repeat with
the remaining feet as necessary
B
.
—
13 —
DLP Projector — Owner’s Manual
Adjusting the Zoom, Focus, and Keystone
1. Use the Zoom button to resize the projected
image and screen size
B
.
Lens H
Focus
A
Lens V
Keystone H
2. Use the Focus button to sharpen the
projected image
A
Zoom
Keystone V
Shutter
(AV Mute)
.
Hot Key
Pattern
B
3. Use the Keystone H buttons (on the remote control) to adjust the keystone
horizontally and make a squarer image. Use the Keystone V buttons
(on the remote control) to adjust keystone vertically and make a squarer
image.
Lens H
Focus
Lens V
Keystone H
Zoom
Keystone V
Shutter
(AV Mute)
—
14 —
Hot Key
Pattern
DLP Projector — Owner’s Manual
Using the Lens Shift Adjustment
The projection lens can be moved up, down, right, and left with the motor-driven lens shift function. This
function makes the positioning of images easy on the screen. Lens shift is generally expressed as a
percentance of the image height or width, see below illustration.
Vertical / Horizontal Lens Shift
Vertical Image Offset: 0% Offset (WUXGA)
No offset is applied - 0% offset.
Half of the image appears above lens
center and half of the image appears
below lens center.
600 pixels
above lens
center.
Lens center
600 pixels
above lens
center.
Vertical Image Offset: 50% Offset (WUXGA)
600 pixels of
shift above
lens center.
Lens center
—
15 —
DLP Projector — Owner’s Manual
Vertical Image Offset: -50% Offset (WUXGA)
Lens center
600 pixels of
shift below
lens center.
Horizontal Image Offset: +/-15% Offset (WUXGA)
1920 pixels
Lens center
-288 pixels
—
16 —
+288 pixels
DLP Projector — Owner’s Manual
Optional Lenses and Projection Size
Projection Lens
The complete projection lens series as below table.
Item
Lens Type
Projection Lens
A16
A15
A01
A06
A03
A13
Focal Length (f)
N/A
11.11-14.06
14.03-17.96
18.2-22.6
22.56-42.87
42.60-80.90
F number
2.4
2.30-2.53
2.30-2.57
2.00-2.30
2.30-3.39
2.30-2.74
Focus spec (MTF)
67 lp/mm
67 lp/mm
67 lp/mm
67 lp/mm
67 lp/mm
67 lp/mm
Zoom Range (Ratio)
N/A
1.26X
1.28X
1.25X
1.9X
1.9X
Zoom & Focus
Adjustment
Motorized
Throw Ratio
(WUXGA)
0.361
0.75-0.95
0.95-1.22
1.22-1.52
1.52-2.92
2.90-5.50
Throw Distance
(WUXGA)
0.96~3.01m
0.81~6.13m
1.02~7.88m
1.31~9.82m
1.64~18.87m
3.12~35.54m
Projection Image
Size
50~300”
Horizontal: ±15%
Vertical: ±50%
Projection Lens: A01, A03, A13
Motorized Lens
Shift
(Lens shift range
based on screen
width and height)
Platform
H
V
rH
rV
0.67” WUXGA
15%
50%
15%
50%
Platform
H
V
rH
rV
0.67” WUXGA
15%
50%
10%
40%
Platform
H
V
rH
rV
0.67” WUXGA
15%
50%
1%
25%
Projection Lens: A06
Projection Lens: A15
—
17 —
DLP Projector — Owner’s Manual
A01/A03/A13 lens shift range:
Lens shift range
A06/A15 lens shift range:
Motorized Lens
Shift
Darker
Lens shift range
•
Lens shift accuracy is 0.5 pixels per step.
•
When the lens is shifted beyond the described range of operation, the
screen edges may become darker or the images may become out of
focus.
Lens vert / horz adjustment
Other Optional Parts:
Part Number
Item
AH-B34020
WiFi Dongle
AH-B34030
Wired Remote Cable
—
18 —
DLP Projector — Owner’s Manual
Projection Size v.s Throw Distance
Platform
WUXGA (16:10)
DMD
0.67”
A16
A01
A06
A03
A13
A15
Projection Lens
Ultra Short
Throw
Wide Zoom
Standard
Long Zoom
Ultra-Long Zoom
Short Throw
Throw Ratio
0.361 (120”)
0.95-1.22
1.22-1.52
1.52-2.92
2.90-5.50
0.75-0.95
Zoom Ratio
N/A
1.28X
1.25X
1.9X
1.9X
1.26X
Projection Distance (m)
(min/max)
0.96-3.01m
1.01-7.98m
1.29-9.93m
1.61-19.00m
3.18-34.77m
0.79-6.21m
Projection Screen Size
Throw Ratio Spec.
Diagonal Height
(inch)
(m)
Projection distance (m)
0.361 (120”)
Width
(m)
(m)
0.95
1.22
1.22
Min (m) Max (m) Min (m)
1.52
1.52
Max (m)
Min (m)
2.92
2.9
Max (m) Min (m)
5.5
0.75
0.95
Max (m)
Min (m)
Max (m)
50
0.67
1.08
NA
1.01
1.31
1.29
1.62
1.61
3.12
3.18
5.89
0.79
1.01
60
0.81
1.29
NA
1.22
1.57
1.56
1.95
1.94
3.76
3.78
7.05
0.96
1.22
70
0.94
1.51
NA
1.43
1.84
1.82
2.29
2.27
4.39
4.39
8.20
1.12
1.43
80
1.08
1.72
NA
1.63
2.11
2.09
2.62
2.60
5.03
5.00
9.36
1.28
1.64
90
1.21
1.94
NA
1.84
2.38
2.35
2.95
2.94
5.66
5.61
10.51
1.45
1.85
100
1.35
2.15
NA
2.05
2.64
2.62
3.28
3.27
6.30
6.21
11.67
1.61
2.05
110
1.48
2.37
NA
2.26
2.91
2.89
3.62
3.60
6.93
6.82
12.82
1.78
2.26
120
1.62
2.58
0.96
2.47
3.18
3.15
3.95
3.94
7.57
7.43
13.98
1.94
2.47
130
1.75
2.80
1.04
2.67
3.44
3.42
4.28
4.27
8.20
8.04
15.13
2.10
2.68
140
1.88
3.02
1.11
2.88
3.71
3.69
4.61
4.60
8.84
8.65
16.29
2.27
2.89
150
2.02
3.23
1.18
3.09
3.98
3.95
4.95
4.94
9.47
9.25
17.44
2.43
3.09
160
2.15
3.45
1.26
3.30
4.24
4.22
5.28
5.27
10.11
9.86
18.60
2.60
3.30
170
2.29
3.66
1.33
3.51
4.51
4.48
5.61
5.60
10.74
10.47
19.75
2.76
3.51
180
2.42
3.88
1.40
3.72
4.78
4.75
5.94
5.93
11.38
11.08
20.91
2.92
3.72
190
2.56
4.09
1.48
3.92
5.05
5.02
6.27
6.27
12.01
11.69
22.06
3.09
3.93
200
2.69
4.31
1.55
4.13
5.31
5.28
6.61
6.60
12.65
12.29
23.22
3.25
4.13
250
3.37
5.38
1.91
5.17
6.65
6.61
8.27
8.27
15.82
15.33
28.99
4.07
5.17
300
4.04
6.46
2.28
6.21
7.98
7.95
9.93
9.93
19.00
18.37
34.77
4.89
6.21
350
4.71
7.54
2.65
NA
V
H
Screen
center
b1
b2
(27.69)mm
b3
Optical axis
a0
—
19 —
a0: Distance from Mirror to Screen
DLP Projector — Owner’s Manual
On-Screen Display (OSD) Menu Settings
OSD Menu Controls
The projector has an OSD that lets you make image adjustments and change various settings.
Navigating the OSD
You can use the remote control cursor buttons or the projector keypad to navigate and make changes to
the OSD.
Auto
Source
B
Enter
Menu
1. To enter the OSD, press the Menu
button
A
.
2. Use the arrow keys (pqtu)
A
C
Exit
D
Display Mode
to navigate within the menu and
adjust a setting up or down B .
OUTPUT
3. Press the Enter button to enter the
SETUP
submenu or confirm the selection/
setting C .
PICTURE
PICTURE
Bright
Save to User
Wall Color
Off
Dynamic Range
Brightness
50
Contrast
50
Sharpness
OPTION
Color
8
50
4. Press the Exit button to return to
the previous menu or exit menus
if at top level D .
Caution:
Depending on the video source, not all items in the OSD are available. Items that are not available
cannot be accessed and are grayed out.
—
20 —
DLP Projector — Owner’s Manual
Setting the OSD Language
Set the OSD language to your preference before continuing.
1. Press the Menu button.
PICTURE
PICTURE
Display Mode
OUTPUT
Bright
Save to User
Wall Color
Off
Dynamic Range
SETUP
Brightness
50
Contrast
50
Sharpness
OPTION
8
Color
50
2. Use the arrow keys (pq) to select SETUP and press the Enter button to enter the SETUP menu.
SETUP
PICTURE
Language
OUTPUT
English
Auto
Ceiling Mount
Rear Projection
Off
Lens Function
SETUP
Top Left
Menu Location
Menu Preferences
Keypad LED Settings
OPTION
On
PIN
3. Use the arrow keys (pq) to select Language and press the Enter
button to enter its submenu.
4. Use the arrow keys (pq) to select the desired language and press
the Enter button to confirm.
5. Press the Exit button several times to exit the menu.
—
21 —
Language
DLP Projector — Owner’s Manual
OSD Menu Overview
Use the following illustration to quickly find a setting or determine the range for a setting.
Main Menu
Sub Menu / Settings
Default
Presentation
Bright
Movie
HDR
Display Mode
sRGB
Bright
DICOM SIM.
Blending
2D High Speed
User
3D
Save to User
Off
Blackboard
Light Yellow
Wall Color
Light Green
Off
Light Blue
Pink
Gray
Off
HDR
Auto
PICTURE
Auto
Bright
Dynamic Range
Standard
HDR Picture Mode
Film
Standard
Detail
Brightness
0 ~ 100
50
Contrast
0 ~ 100
50
Sharpness
0 ~ 15
8
Color
0 ~ 100
50
Tint
0 ~ 100
50
Phase
0 ~ 31
0
Horz Position
0 ~ 100
50
Vert Position
0 ~ 100
50
Auto Image
Normal
Wide
Wide
Off
3D Mode
On
On
Auto
3D Display
Frame Packing
3D Format
Side by Side
Top and Bottom
Frame Sequential
—
22 —
Auto
DLP Projector — Owner’s Manual
Main Menu
Sub Menu / Settings
Default
Off
3D Invert
On
Off
DLP Link
On
Off
Off
3D
3D Display
3D-2D
L
To Emitter
3D Sync Out
To Next Projector
1st Frame
L/R Reference
Field GPIO
Frame Delay
1~500
Off
HSG Enable
On
Off
Auto Test Pattern
PICTURE
HSG Adjustment
3D
R
On
To Emitter
1st Frame
By set
Off
On
Red H.
0 ~ 254
127
Red S.
0 ~ 254
127
Red G.
0 ~ 254
127
Green H.
0 ~ 254
127
Green S.
0 ~ 254
127
Green G.
0 ~ 254
127
Blue H.
0 ~ 254
127
Blue S.
0 ~ 254
127
Blue G.
0 ~ 254
127
Cyan H.
0 ~ 254
127
Cyan S.
0 ~ 254
127
Cyan G.
0 ~ 254
127
Magenta H.
0 ~ 254
127
Magenta S.
0 ~ 254
127
Magenta G.
0 ~ 254
127
Yellow H.
0 ~ 254
127
Yellow S.
0 ~ 254
127
Yellow G.
0 ~ 254
127
White R Gain
0 ~ 254
127
White G Gain
0 ~ 254
127
White B Gain
0 ~ 254
127
0 - 10
By source set
Reset to Default
White Peaking
Film
Video
Graphics
Advanced
Gamma2.2
Gamma
3D
Blackboard
DICOM
Vivid
—
23 —
By source set
DLP Projector — Owner’s Manual
Main Menu
Sub Menu / Settings
Default
Warm
Color Temperature
Standard
By source set
Cool
Auto
RGB
Color Space
RGB Video
Auto
REC709
REC601
PICTURE
Advanced
Color Settings
Red Gain
0 ~ 100
50
Green Gain
0 ~ 100
50
Blue Gain
0 ~ 100
50
Red Offset
0 ~ 100
50
Green Offset
0 ~ 100
50
Blue Offset
0 ~ 100
50
Reset RGB Gain/
Offset
Off
Color Enhancement
CE 1
CE1
CE 2
2X
Color Wheel Speed
3X
Off
Extreme Black
On
Off
DynamicBlack™
On
3X
Off
Off
Auto
4:3
Aspect Ratio
16:9
Auto
16:10
LBX
Native
OUTPUT
Edge Mask
0~10
H Digital Zoom
50 ~ 400
100
0
V Digital Zoom
50 ~ 400
100
H Digital Shift
0 ~ 100
50
V Digital Shift
0 ~ 100
50
Off
PC Mode
Image Warping
On
Off
H Keystone
0 ~ 200
100
V Keystone
0 ~ 200
100
H Pincushion
0 ~ 100
50
V Pincushion
0 ~ 100
50
—
24 —
DLP Projector — Owner’s Manual
Main Menu
Sub Menu / Settings
Image Warping
Default
Top Left Horz Adjust
0 ~ 240
0
Top Left Vert Adjust
0 ~ 160
0
Top Right Horz
Adjust
0 ~ 240
0
Top Right Vert
Adjust
0 ~ 160
0
Bottom Left Horz
Adjust
0 ~ 240
0
Bottom Left Vert
Adjust
0 ~ 160
0
Bottom Right Horz
Adjust
0 ~ 240
0
Bottom Right Vert
Adjust
0 ~ 160
0
4-Corner
Reset to Default
Off
PIP/PBP Enable
On
Off
HDMI1
HDMI2
DVI-D
Main Source
VGA
OUTPUT
By set
HDBaseT
3G-SDI
HDMI1
HDMI2
DVI-D
Sub Source
VGA
By set
HDBaseT
PIP/PBP
3G-SDI
Swap
Small
Size
Medium
Large
Large
PBP, Main Left
PBP, Main Top
PBP, Main Right
PBP, Main Bottom
Layout
PIP-Bottom Right
PIP-Bottom Left
PIP-Top Left
PIP-Top Right
—
25 —
PBP, Main Left
DLP Projector — Owner’s Manual
Main Menu
Sub Menu / Settings
Default
English
French
Spanish
German
Italian
Russian
Language
Chinese Simplified
English
Japanese
Korean
Portuguese
Indonesian
Dutch
Arabic
Off
Ceiling Mount
On
Auto
Auto
Rear Projection
Off
Off
On
Focus in - motor stop
Focus in - motor move 1 step
Focus in - motor move 30 steps
Focus
Focus out - motor stop
Focus out - motor move 1 step
SETUP
Focus out - motor move 30 steps
Zoom in - motor stop
Zoom in - motor move 1 step
Zoom in - motor move 30 steps
Zoom
Zoom out - motor stop
Zoom out - motor move 1 step
Zoom out - motor move 30 steps
Left shift up - motor stop
Left shift up - motor shift 1 pixel
Lens Function
Left shift up - motor shift 30 pixels
Left shift down - motor stop
Left shift down - motor shift 1 pixel
Left shift down - motor shift 30 pixels
Lens Shift
Left shift right - motor stop
Left shift right - motor shift 1 pixel
Left shift right - motor shift 30 pixels
Left shift left - motor stop
Left shift left - motor shift 1 pixel
Left shift left - motor shift 30 pixels
Lens Calibration
Yes/No (Dialog box)
No
Lens Lock
No
Yes
Lens Memory
—
26 —
Apply Position
1~5
Save Position
1~5
DLP Projector — Owner’s Manual
Main Menu
Sub Menu / Settings
Default
Top left
Top right
Menu Location
Center
Top left
Bottom left
Bottom right
Menu
Preferences
Keypad LED
Settings
Pin
Menu Transparency
0~9
0
Off
Show Messages
On
On
Off
On
On
Off
PIN Protect
Off
On
Change PIN
12V Trigger
Off
Off
On
4K Compatible
(HDMI1)
Off
4K Compatible
(HDMI2)
Off
On
On
On
On
DHCP
SETUP
LAN
OFF
ON
By set
IP Address
By set
Subnet Mask
By set
Default Gateway
By set
DNS
MAC Address
By set
Apply
WLAN
Enable
By set
Start IP
By set
End IP
By set
IP address
Communications
Subnet Mask
By set
SSID
By set
Apply
Crestron
PJ Link
AMX Device
Discovery
Control
Telnet
HTTP
—
27 —
Off
On
Off
On
Off
On
Off
On
Off
On
On
On
On
On
On
DLP Projector — Owner’s Manual
Main Menu
Sub Menu / Settings
Default
Network Reset
By set
1200
2400
4800
9600
Serial Port Baud Rate
14400
115200
19200
38400
SETUP
Communications
57600
115200
Projector Address
0-9
Front
IR Control
Top
HDBaseT
Auto Source
High Altitude
Off
0
Off
On
Off
On
Off
On
On
On
Off
On
On
Off
Off
On
Off
Green Grid
Magenta Grid
White Grid
White
Test Pattern
Black
Off
Red
Green
Blue
Yellow
Magenta
OPTION
Cyan
Logo
Background
Color
Blue
Logo
Black
White
Hot-Key settings
Aspect Ratio
Freeze Screen
0.5W mode
Active mode
Standby Power Mode
Communication
mode
Power Settings
Off
Direct Power On
On
Off
Signal Power On
On
—
28 —
Communication mode
Off
Off
DLP Projector — Owner’s Manual
Main Menu
Sub Menu / Settings
Default
Auto Power Off (min)
Power Settings
Sleep Timer (min.)
0~180 (5 min
increments)
20 Mins
0 ~ 990 (30 min
increments)
0
Constant Power
Light Source
Settings
Light Source Mode
Constant Luminance
Constant Power Settings
1 ~ 100
Total Projector Hours
Model Name
Serial Number
Native Resolution
FW Version
F-MCU Version
S-MCU Version
M-MCU Version
L-MCU Version
A-MCU Version
LAN Version
Formatter Version
FPGA0 Version
FPGA1 Version
HDBaseT Version
OPTION
Main Source
- Resolution
Information
- Signal Format
- Pixel Clock
- Horz Refresh
- Vert Refresh
Sub Source
- Resolution
- Signal Format
- Pixel Clock
- Horz Refresh
- Vert Refresh
Display Mode
Color Space
Light Source Mode
Total Projector Hours
Standby Power Mode
IP Address
DHCP
SSID
Factory Reset
Constant Power
Eco Mode
Yes/No (Dialog box)
Service
—
29 —
100
DLP Projector — Owner’s Manual
Picture Menu
Press the Menu button to open the OSD menu. Press the arrow keys (pq) to select PICTURE and press
the Enter button to enter the PICTURE menu. Press the arrow keys (pq) to select the menu option
and press the Enter button to enter its submenu. Press the arrow keys (pqtu) to select or adjust the
desired settings and press the Enter button to confirm.
PICTURE
PICTURE
Display Mode
OUTPUT
Bright
Save to User
Wall Color
Off
Dynamic Range
SETUP
Brightness
50
Contrast
50
Sharpness
OPTION
8
Color
50
Item
Description
Display Mode
Optimize the projector for displaying images under certain conditions, such
as Presentation, Bright, Movie, HDR, sRGB, DICOM SIM., Blending, 2D
High Speed, User (user-definable preset), and 3D.
Save to User
Save the current picture settings in user profile, including brightness,
contrast, color, tint, color space, HSG adjustment and so on.
Wall Color
Select a similar color to the wall color from the preset six colors, such as
Blackboard, Light Yellow, Light Green, Light Blue, Pink, and Gray. Select
Off to disable the function.
Dynamic Range
Configure the High Dynamic Range (HDR) setting and its effect when
displaying video from 4K Blu-ray players and streaming devices.
Brightness
Adjust the intensity of the image.
Contrast
Adjust the degree of difference between the lightest and darkest parts of
the picture and change the amount of black and white in the image.
Sharpness
Select the edge clarity of the image.
Color
Adjust a video image from black and white to fully saturated color. The color
setting applies to video sources only.
Tint
Adjust the red-green color balance in the image of video images. The tint
setting applies to video sources only.
Phase
Analog signals only. Adjust pixel phase when the image still shows shimmer
or noise after pixel tracking is optimized. Pixel phase can adjust the phase
of the pixel-sampling clock relative to the incoming signal.
Horz Position
Move the image right or left within the area of available pixels.
Vert Position
Move the image up or down within the area of available pixels.
Auto Image
Force the projector to reacquire and lock to the input signal. This is useful
when signal quality is marginal.
3D Display
Configure the 3D display settings. See “3D Display Menu” on page 31.
HSG Adjustment
Configure the color management settings. See “HSG Adjustment Menu” on
page 32.
Advanced
Configure the advanced image settings. See “Advanced Menu” on page 33.
—
30 —
DLP Projector — Owner’s Manual
3D Display Menu
Press the Menu button to open the OSD menu. Press the arrow keys (pq) to select PICTURE and press
the Enter button to enter the PICTURE menu. Press the arrow keys (pq) to select 3D Display and press
the Enter button to enter the 3D Display menu. Press the arrow keys (pq) to select the menu option
and press the Enter button to enter its submenu. Press the arrow keys (pqtu) to select or adjust the
desired settings and press the Enter button to confirm.
3D
PICTURE
3D Mode
OUTPUT
SETUP
On
3D Format
Auto
3D Invert
Off
DLP-LINK
Off
3D-2D
3D
3D Sync Out
To Emitter
L/R Reference
OPTION
Field GPIO
3D Frame Delay
1
Item
Description
3D Mode
Enable to display 3D content.
3D Format
Set 3D format. Supports Auto (automatically detects format), Frame
Packing, Side by Side, Top and Bottom, and Frame Sequential.
3D Invert
Invert 3D sync signal for the application of using single projector.
DLP Link
Select 3D Sync source:
• On: 3D Sync type is DLP link.
• Off: 3D Sync source is from the 3D SYNC OUT port.
3D-2D
Set how the 3D content is displayed on the screen: 3D (display 3D signal),
left (L) (display the left frame of the 3D content), or right (R) (display the
right frame of the 3D content).
3D Sync Out
Transmit a 3D sync signal by the 3D sync output corrector to the emitter
(To Emitter) or to the next projector (To Next Projector) for 3D blending
purposes.
L/R Reference
Set the source of the left or right reference, such as 1ST Frame (used for
single 3D projector) and Field GPIO (make the 3D output signal the same
for multiprojectors application).
Frame Delay
Set the frame delay to correct asynchronous displaying image in 3D
blending.
—
31 —
DLP Projector — Owner’s Manual
HSG Adjustment Menu
Press the Menu button to open the OSD menu. Press the arrow keys (pq) to select PICTURE and press
the Enter button to enter the PICTURE menu. Press the arrow keys (pq) to select HSG Adjustment
and press the Enter button to enter the HSG Adjustment menu. Press the arrow keys (pq) to select the
menu option and press the Enter button to enter its submenu. Press the arrow keys (pqtu) to select or
adjust the desired settings and press the Enter button to confirm.
HSG Adjustment
PICTURE
HSG Enable
OUTPUT
SETUP
OPTION
On
Auto Test Pattern
On
Red H.
127
Red S.
127
Red G.
127
Green H.
127
Green S.
127
Green G.
127
Item
Description
HSG Enable
Enable/Disable the HSG adjustment function.
Auto Test Pattern
Enable/Disable solid colored test pattern according to the menu item on
which you are positioned.
Red H. / Green H. /
Blue H. / Cyan H. /
Magenta H. / Yellow H.
Adjust the hue of the red, green, blue, cyan, magenta, or yellow channel of
the image.
Red S./ Green S./
Blue S./ Cyan S./ Magenta
S./ Yellow S.
Adjust the saturation of the red, green, blue, cyan, magenta, or yellow
channel of the image.
Red G. / Green G. /
Blue G. / Cyan G. /
Magenta G. / Yellow G.
Adjust the gain of the red, green, blue, cyan, magenta, or yellow channel of
the image.
White R Gain /
White G Gain /
White B Gain
Adjust the white balance of the red, green, or blue channel of the image.
Reset to Default
Reset the hue, saturation, gain, and white balance adjustments to the
factory defaults.
—
32 —
DLP Projector — Owner’s Manual
Advanced Menu
Press the Menu button to open the OSD menu. Press the arrow keys (pq) to select PICTURE and press
the Enter button to enter the PICTURE menu. Press the arrow keys (pq) to select Advanced and press
the Enter button to enter the Advanced menu. Press the arrow keys (pq) to select the menu option
and press the Enter button to enter its submenu. Press the arrow keys (pqtu) to select or adjust the
desired settings and press the Enter button to confirm.
Advanced
PICTURE
White Peaking
OUTPUT
10
Gamma
Video
Color Temperature
Standard
Color Space
SETUP
OPTION
Auto
Color Settings
Color Enhancement
CE 1
Color Wheel Speed
2X
Extreme Black
Off
Item
Description
White Peaking
(Video source only) Increase the brightness of whites that are near 100%.
Gamma
Select the appropriate gamma from Film, Video, Graphics, Gamma2.2, 3D,
Blackboard, DICOM, and Vivid.
Color Temperature
Change the intensity of the colors from Warm, Standard, and Cool.
Color Space
Select a color space that has been specifically tuned for the input signal.
Use only for analog signals and certain digital sources. Available options:
Auto, RGB, RGB Video, REC709, and REC601.
Color Settings
Adjust the gain of the red, green, or blue channel of the image. It will affect
the black and white.
Adjust the offset of the red, green, or blue channel of the image. It will affect
the black and white.
Reset RGB Gain/Offset to return the factory default settings for color
adjustments.
Color Enhancement
The Color Enhancement control can improve the picture quality of pictures
with a high saturation of color.
Color Wheel Speed
Higher speed will reduce the appearance of color artifacts seen by some
people. Color Wheel Speed can be set to 2x to provide quieter sound and
longer light source life, or 3X to provide better color performance.
Extreme Black
Analyze the current input image and calculate an offset value which is then
added to the analog to digital converter black level value. This ensures
optimum black level for each analog source.
DynamicBlack™
Enable or disable the dynamic black function. Enable this function raises
the contrast ratio dynamically.
—
33 —
DLP Projector — Owner’s Manual
Output Menu
Press the Menu button to open the OSD menu. Press the arrow keys (pq) to select OUTPUT and press
the Enter button to enter the OUTPUT menu. Press the arrow keys (pq) to select the menu option
and press the Enter button to enter its submenu. Press the arrow keys (pqtu) to select or adjust the
desired settings and press the Enter button to confirm.
OUTPUT
PICTURE
Aspect Ratio
OUTPUT
SETUP
Auto
Edge Mask
0
H Digital Zoom
100
V Digital Zoom
100
H Digital Shift
50
V Digital Shift
50
Image Warping
OPTION
PIP / PBP
Item
Description
Aspect Ratio
Display an image with the detected size, or resize the image by maximizing
either the height, width or both, or resize to the maximum size possible
while keeping the original aspect ratio. Available options: Auto, 4:3, 16:9,
16:10, LBX, and Native.
Edge Mask
Remove the video encoding noise on the edge of video source.
H Digital Zoom
Change the size of projector’s display area horizontally. If the display area
has been resized by this setting, it can be moved by changing the H Digital
Shift and V Digital Shift settings.
V Digital Zoom
Change the size of projector’s display area vertically. If the display area
has been resized by this setting, it can be moved by changing the H Digital
Shift and V Digital Shift settings.
H Digital Shift
Move the display area horizontally if its size has been changed by the
Digital Zoom setting.
V Digital Shift
Move the display area vertically if its size has been changed by the Digital
Zoom setting.
Image Warping
Configure the image warping settings. See “Image Warping Menu” on page
35.
PIP/PBP
Configure the PIP/PBP settings. See “PIP/PBP Menu” on page 36.
Note:
•
•
•
When 16:9 Aspect Ratio is selected, the resolution of the input signal or 1600x1200 will
automatically be switched to 1600x900.
If Auto is selected and input signal is 16:9, screen type will auto become (1920x1200).
If Native is selected, the screen will automatically become 1:1 mapping centered.
—
34 —
DLP Projector — Owner’s Manual
Image Warping Menu
Press the Menu button to open the OSD menu. Press the arrow keys (pq) to select OUTPUT and press
the Enter button to enter the OUTPUT menu. Press the arrow keys (pq) to select Image Warping and
press the Enter button to enter the Image Warping menu. Press the arrow keys (pq) to select the menu
option and press the Enter button to enter its submenu. Press the arrow keys (pqtu) to select or adjust
the desired settings and press the Enter button to confirm.
Geometric Correction
PICTURE
PC Mode
OUTPUT
SETUP
Off
H Keystone
100
V Keystone
100
H Pincushion
50
V Pincushion
50
4-Corner
Reset to Default
OPTION
Item
Description
PC Mode
Enable PC software to control geometry.
H Keystone
Adjust the keystone horizontally and make a squarer image.
Horizontal keystone is used to correct a keystoned image shape in which
the left and right borders of the image are unequal in length. This is
intended for use with horizontally on-axis applications.
V Keystone
Adjust the keystone vertically and make a squarer image.
Vertical keystone is used to correct a keystoned image shape in which the
top and bottom are slanted to one of the sides. This is intended when for
use with vertically on-axis applications.
H Pincushion
Adjust the pincushion horizontally and make a more square image.
V Pincushion
Adjust the pincushion vertically and make a more square image.
—
35 —
DLP Projector — Owner’s Manual
Item
Description
4-Corner
Allow the image to be squeezed to fit an area defined by moving each of
the four corners’ x and y position.
A
A
B
B
B
B
A
Reset to Default
A
Reset the Image Warping setting to the factory defaults.
PIP/PBP Menu
Press the Menu button to open the OSD menu. Press the arrow keys (pq) to select OUTPUT and press
the Enter button to enter the OUTPUT menu. Press the arrow keys (pq) to select PIP/PBP and press
the Enter button to enter the PIP/PBP menu. Press the arrow keys (pq) to select the menu option
and press the Enter button to enter its submenu. Press the arrow keys (pqtu) to select or adjust the
desired settings and press the Enter button to confirm.
PIP / PBP
PICTURE
PIP/PBP Enable
OUTPUT
On
Main Source
VGA
Sub Source
VGA
Swap
SETUP
Size
Large
Layout
PBP, Main Left
OPTION
Item
Description
PIP/PBP Enable
Toggle between displaying two sources at once (Main and PIP/PBP
images) or one source only.
Main Source
From the list of active inputs, select one to be used as the main image.
Sub Source
From the list of active inputs, select one to be used as the PIP/PBP.
Swap
Change the main image to PIP/PBP, and the PIP/PBP to main image.
Swapping is available only when PIP/PBP is enabled.
Size
Select the PIP/PBP size. Available options: Small, Medium, or Large.
Layout
Set the location of the PIP/PBP image on the screen.
—
36 —
DLP Projector — Owner’s Manual
PIP/PBP layout and size table as described below.
¾¾P : indicates primary source region (lighter color).
¾¾* : Both source regions are the same size.
PIP/PBP Size
PIP/PBP Layout
Small
Medium
Large
PBP, Main Left
P
P
PBP, Main Top
*
P
P
P
*
P
PBP, Main Right
P
P
P
PBP, Main Bottom
*
*
P
P
PIP-Bottom Right
P
P
P
PIP-Bottom Left
P
P
P
P
P
P
P
P
P
P
PIP-Top Left
PIP-Top Right
VGA
DVI-D
HDMI-1
HDMI-2
HDBaseT
3G-SDI
VGA
PIP/PBP Matrix
—
V
V
V
V
V
DVI-D
V
—
V
V
V
V
HDMI-1
V
V
—
V
V
V
HDMI-2
V
V
V
—
V
V
HDBaseT
V
V
V
V
—
V
3G-SDI
V
V
V
V
V
—
—
37 —
DLP Projector — Owner’s Manual
Setup Menu
Press the Menu button to open the OSD menu. Press the arrow keys (pq) to select SETUP and press
the Enter button to enter the SETUP menu. Press the arrow keys (pq) to select the menu option and
press the Enter button to enter its submenu. Press the arrow keys (pqtu) to select or adjust the
desired settings and press the Enter button to confirm.
SETUP
PICTURE
Language
OUTPUT
English
Ceiling Mount
Auto
Rear Projection
Off
Lens Function
SETUP
Top Left
Menu Location
Menu Preferences
On
Keypad LED Settings
OPTION
PIN
Item
Description
Language
This item allows you to select an available language for the OSD display.
Ceiling Mount
Turn the image upside down for ceiling-mounted projection.
Rear Projection
Reverse the image so you can project from behind a translucent screen.
Lens Function
Configure the lens function settings. See “Lens Function Menu” on page 39.
Menu Location
Set the menu location on the display screen. Available options: Top Left,
Top Right, Center, Bottom Left, and Bottom Right.
Menu Preferences
Configure the menu preferences settings. See “Menu Preferences Menu”
on page 40.
Keypad LED Settings
Turn the backlight of the keypad on/off.
PIN
Configure the PIN settings. See “PIN Menu” on page 40.
12V Trigger
Set the setting to On to turn on the 12V trigger when the lamp is lighted.
Set to Off to disable the 12 trigger turning in any state.
4K Compatible (HDMI1)(*) / Set to On to enable EDID of HDMI 2.0 for the HDMI1 or HDMI2 port.
4K Compatible (HDMI2)(*)
Communications
Configure the communications settings. See “Communications Menu” on
page 41.
Note:
•
(*)The common HDMI versions are HDMI 1.4 and 2.0. With HDMI 1.4, the rate of 4K is limited to 30
frames per second, whereas HDMI 2.0 plays 4K video without compromise, at 50 and 60 frames per
second. This projector supports both HDMI 1.4 and 2.0. In order to play the HDMI content properly,
set up the projector EDID for the input devices with different HDMI specifications.
4K material
—
38 —
DLP Projector — Owner’s Manual
Lens Function Menu
Press the Menu button to open the OSD menu. Press the arrow keys (pq) to select SETUP and press
the Enter button to enter the SETUP menu. Press the arrow keys (pq) to select Lens Function and
press the Enter button to enter the Lens Function menu. Press the arrow keys (pq) to select the menu
option and press the Enter button to enter its submenu. Press the arrow keys (pqtu) to select or adjust
the desired settings and press the Enter button to confirm.
Lens Function
PICTURE
Focus
OUTPUT
Zoom
Lens Shift
Lens Calibration
SETUP
Off
Lens Lock
Lens Memory
OPTION
Item
Description
Focus
Adjust focus function on the projected image.
Zoom
Adjust zoom function on the projected image.
Lens Shift
Shift the projected image.
Lens Calibration
Perform calibration and return lens to the center position.
Lens Lock
Select this function to prevent all lens motors from moving.
• Yes: Lens shift will be locked.
• No: Lens shift can be used by user.
Lens Memory
Save the current lens position after doing lens shift. Apply lens position to
the chosen set of lens memory. The lens memory can be set and saved up
to maximum five.
—
39 —
DLP Projector — Owner’s Manual
Menu Preferences Menu
Press the Menu button to open the OSD menu. Press the arrow keys (pq) to select SETUP and press
the Enter button to enter the SETUP menu. Press the arrow keys (pq) to select Menu Preferences and
press the Enter button to enter the Menu Preferences menu. Press the arrow keys (pq) to select the
menu option and press the Enter button to enter its submenu. Press the arrow keys (pqtu) to select or
adjust the desired settings and press the Enter button to confirm.
Menu Preferences
PICTURE
Menu Transparency
OUTPUT
0
Show Messages
On
SETUP
OPTION
Item
Description
Menu Transparency
Change OSD menu background to be transparent.
Show Messages
Display status messages on the screen.
PIN Menu
Press the Menu button to open the OSD menu. Press the arrow keys (pq) to select SETUP and press
the Enter button to enter the SETUP menu. Press the arrow keys (pq) to select PIN and press the Enter
button to enter the PIN menu. Press the arrow keys (pq) to select the menu option and press the Enter
button to enter its submenu. Press the arrow keys (pqtu) to select or adjust the desired settings and
press the Enter button to confirm.
Security
PICTURE
PIN Protect
OUTPUT
Off
Change PIN
SETUP
OPTION
Item
Description
PIN Protect
The PIN (personal identification number) feature allows you to password
protect your projector. Once you enable the PIN feature, you must enter the
PIN before you can project an image. (PIN Default: 12345)
Change PIN
Change the PIN.
—
40 —
DLP Projector — Owner’s Manual
Communications Menu
Press the Menu button to open the OSD menu. Press the arrow keys (pq) to select SETUP and press
the Enter button to enter the SETUP menu. Press the arrow keys (pq) to select Communications and
press the Enter button to enter the Communications menu. Press the arrow keys (pq) to select the
menu option and press the Enter button to enter its submenu. Press the arrow keys (pqtu) to select or
adjust the desired settings and press the Enter button to confirm.
Communications
PICTURE
LAN
OUTPUT
WLAN
Control
Network Reset
SETUP
115200
Serial Port Baud Rate
0
Projector Address
IR Control
OPTION
Item
Description
LAN
Configure the local area network (LAN) settings.
• DHCP: Turn the DHCP ON/OFF.
• IP Address: Assign Network IP Address.
• Subnet Mask: Assign Network Subnet Mask.
• Default Gateway: Assign Network Default Gateway.
• DNS: Assign DNS.
• MAC Address: Display the network MAC Address value.
• Apply: Apply Network settings.
WLAN
Configure the wireless local area network (WLAN) settings.
• Enable: Enable/Disable WLAN.
• Start IP: Start of IP Address.
• End IP: End of IP Address.
• IP Address: Assign Network IP Address.
• Subnet Mask: Assign Network Subnet Mask.
• SSID: Assign Network Service Set Identifier.
• Apply: Apply Network settings.
Control
Configure network control settings.
• Crestron: Use this function to select the network function (port: 41794).
• PJ Link: Use this function to select the network function (port: 4352).
• AMX Device Discovery: Use this function to select the network function
(port: 9131).
• Telnet: Use this function to select the network function (port: 3023).
• HTTP: Use this function to select the network function (port: 80).
Network Reset
Reset network setting to the factory defaults.
Serial Port Baud Rate
Select the serial port its baud rate. Available options: 1200, 2400, 4800,
9600, 14400, 19200, 38400, 57600, and 115200.
—
41 —
DLP Projector — Owner’s Manual
Item
Description
Projector Address
Set the projector address. The projector will respond to IR remotes set either
at the same address as the projector or to IR remotes set to address 0.
IR Control
Front:
ON: Enable the Front IR Sensor
OFF: Disable the Front IR Sensor
Top
ON: Enable the Top IR Sensor
OFF: Disable the Top IR Sensor
HDBaseT(*)
ON: Enable control signal via HDBaseT device
OFF: Disable control signal via HDBaseT device
Communications menu
Note:
•
(*)Change the setting ON / OFF depending on the device, if IR remote control of the projector does
not work.
Option Menu
Press the Menu button to open the OSD menu. Press the arrow keys (pq) to select OPTION and press
the Enter button to enter the OPTION menu. Press the arrow keys (pq) to select the menu option
and press the Enter button to enter its submenu. Press the arrow keys (pqtu) to select or adjust the
desired settings and press the Enter button to confirm.
OPTION
PICTURE
OUTPUT
Auto Source
On
High Altitude
Off
Test Pattern
Off
Background Color
SETUP
Logo
Aspect Ratio
Hot-Key settings
Power Settings
Light Source Settings
OPTION
Information
Item
Description
Auto Source
Select “On” to allow the projector to search for other signals if the current
input signal is lost. When the setting is disabled, the projector will only
search current input connection.
High Altitude
Set high altitude mode On/Off. When On, the fan will operate at high speed
to ensure sufficient air flow for high altitudes.
Test Pattern
Choose the desired internal test pattern to display. Press the Pattern button
to display next test pattern. Available options: Green Grid, Magenta Grid,
White Grid, White, Black, Red, Green, Blue, Yellow, Magenta, and Cyan.
Select Off to disable the function.
Background Color
Use this feature to display a Logo, Blue, Black or White screen when no
signal is available.
—
42 —
DLP Projector — Owner’s Manual
Item
Description
Hot-Key settings
Assign Aspect Ratio or Freeze Screen as a hot-key on the remote control
by highlighting the desired function in the list and pressing the Enter button.
Choose a function that does not already have a dedicated button, and
assign the hot-key to that function, allowing you to quickly and easily use
either of the chosen functions.
Power Settings
Configure the power settings. See “Power Settings Menu” on page 43.
Light Source Settings
Configure the light source settings. See “Light Source Settings Menu” on
page 44.
Information
Display various projector related information on the screen.
Factory Reset
Restore all settings to their default value. It will not reset network.
WARNING: After resetting, lens calibration is necessary.
Service
For service only.
Power Settings Menu
Press the Menu button to open the OSD menu. Press the arrow keys (pq) to select OPTION and press
the Enter button to enter the OPTION menu. Press the arrow keys (pq) to select Power Settings and
press the Enter button to enter the Power Settings menu. Press the arrow keys (pq) to select the menu
option and press the Enter button to enter its submenu. Press the arrow keys (pqtu) to select or adjust
the desired settings and press the Enter button to confirm.
Power Settings
PICTURE
Standby Power Mode
OUTPUT
SETUP
Communication Mode
Direct Power On
Off
Signal Power On
Off
Auto Power Off (min.)
20
0
Sleep Timer (min.)
OPTION
Item
Description
Standby Power Mode
Set the standby power mode.
• 0.5W mode: The projector is in standby mode when connected to AC
power. (<0.5W)
• Active mode: Low power consumption (< 2 Watt) which allows the LAN
module to enter sleep mode and supports to be woken by Wake on LAN
(WoL). When the LAN module is woken by WoL, the projector is ready to
receive commands over the network.
• Communication mode: The projector could be controlled via the LAN
terminal during power standby.
Direct Power On
The projector automatically turns on when electrical power is connected.
Signal Power On
Choose On to activate Signal Power On. The projector will automatically
turn on after detecting HDMI input source. The available options inlcude On
and Off.
—
43 —
DLP Projector — Owner’s Manual
Item
Description
Auto Power Off (min.)
Automatically turns the projector off after no signals are detected for
a preset number of minutes. If an active signal is received before the
projector powers down, the image will be displayed.
Sleep Timer (min.)
This item allows the projector to automatically power off after it has been on
for a specified amount of time.
Light Source Settings Menu
Press the Menu button to open the OSD menu. Press the arrow keys (pq) to select OPTION and press
the Enter button to enter the OPTION menu. Press the arrow keys (pq) to select Light Source Settings
and press the Enter button to enter the Light Source Settings menu. Press the arrow keys (pq) to
select the menu option and press the Enter button to enter its submenu. Press the arrow keys (pqtu)
to select or adjust the desired settings and press the Enter button to confirm.
Light Source Settings
PICTURE
Light Source Mode
OUTPUT
Eco Mode
Constant Power Settings
100
Total Projector Hours
3
SETUP
OPTION
Item
Description
Light Source Mode
Select Constant Power, Constant Luminance, or Eco Mode. When in Eco
Mode, the projector will adjust to the lowest fan speed and switch the light
source power to the minimum setting.
Constant Power Settings
Set the value of the light source power (in Watts).
Total Projector Hours
Display the projection time.
—
44 —
DLP Projector — Owner’s Manual
Control Your Projector Using Web Browser
Ethernet
Projector
Wired LAN Terminal functionalities
Remote control and monitoring of a projector from a PC (or Laptop) via wired LAN is also possible.
Compatibility with Crestron control boxes enables not only collective projector management on a network
but also management from a control panel on a PC (or Laptop) browser screen.
• Crestron is a registered trademark of Crestron Electronics, Inc. of the United States.
Supported External Devices
This projector is supported by the specified commands of the Crestron Electronics controller and related
software (ex, RoomView ®).
http://www.crestron.com/
The projector supports AMX and PJ-Link as well.
http://www.amx.com/
http://pjlink.jbmia.or.jp/
For more detail of information about the diverse types of external devices which can be connected to the
Ethernet port and remote/control the projector, as well as the related control commands supporting for
each external device, kindly please get contact with the Support-Service team directly.
LAN_RJ45
1. Connect an RJ45 cable to Ethernet port on the projector and the PC (Laptop).
12V OUT
Max. 0.35A
HDBaseT
REMOTE IN
LAN
DVI-D
HDMI1
USB POWER OUT
(5V Max. 0.5A)
VGA IN
3G-SDI IN
HDMI2
3D SYNC IN
3D SYNC
OUT
RS-232C
VGA OUT
—
45 —
DLP Projector — Owner’s Manual
2. On the PC (Laptop), select Start → Control Panel → Network and Internet.
3. Right-click on Local Area Connection, and select Properties.
4. In the Properties window, select the Networking tab, and select Internet Protocol Version 4 (TCP/
IPv4).
—
46 —
DLP Projector — Owner’s Manual
5. Click Properties.
6. Click Use the following IP address and fill in the IP address and Subnet mask, then click OK.
7. Press the Menu button on the projector.
8. Select SETUP → Communications → LAN.
—
47 —
DLP Projector — Owner’s Manual
9. After getting into LAN, input the following:
•
•
•
•
DHCP: Off
IP Address: 10.10.10.10
Subnet Mask: 255.255.255.0
Default Gateway: 0.0.0.0
10. Select the Apply → Yes to confirm the settings, and then wait until finished.
11. Open a web browser (for example, Microsoft Internet Explorer with Adobe Flash Player 9.0 or higher).
In the Address bar, input the IP address: 10.10.10.10.
12. Press the Enter / ► button.
The projector is setup for remote management. On the first page of the web interface, you can find
projector’s model name, serial number, power level, power mode, system temperature, network
configuration, and firmware version information. To configure projector settings, click on the respective
menu on the left side of the interface.
Warping & Blending function
The Warping & Blending application software and its manual can be downloaded from EIKI website.
URL: https://global.eiki.com
—
48 —
DLP Projector — Owner’s Manual
RS232 by Telnet Function
Besides projector connected to RS232 interface with “Hyper-Terminal” communication by dedicated
RS232 command control, there is alternative RS232 command control way, so called “RS232 by TELNET”
for LAN/RJ45 interface.
Quick Start-Guide for “RS232 by TELNET”
Check and get the IP-Address on OSD of the projector.
Make sure that laptop/PC can access the web-page of the projector.
Make sure that “Windows Firewall” setting to be disabled in case of “TELNET” function filtering out by
laptop/PC.
Start → All Programs → Accessories → Command Prompt
Input the command format like the below:
telnet ttt.xxx.yyy.zzz 3023 (the Enter button is pressed)
(ttt.xxx.yyy.zzz: IP-Address of the projector)
If Telnet-Connection ready, and user can have RS232 command input, then press the Enter button, the
RS232 command will be workable.
—
49 —
DLP Projector — Owner’s Manual
How to have TELNET enabled in Windows VISTA / 7
By default installation for Windows VISTA, “TELNET” function is not included. But end-user can have it by
way of “Turn Windows features On or Off” to be enabled.
1. Open “Control Panel” in Windows VISTA.
2. Open “Programs”.
—
50 —
DLP Projector — Owner’s Manual
3. Select “Turn Windows features on or off” to open.
4. Have “Telnet Client” option checked, then click OK.
Specsheet for “RS232 by TELNET”:
1. Telnet: TCP
2. Telnet port: 3023
(for more detail, kindly please get contact with the service agent or team)
3. Telnet utility: Windows “TELNET.exe” (console mode)
4. Disconnection for RS232-by-Telnet control normally: Close Windows Telnet utility directly after TELNET
connection ready.
5. Limitation 1 for Telnet-Control: there is less than 50 bytes for successive network payload for
Telnet-Control application.
Limitation 2 for Telnet-Control: there is less than 31 bytes for one complete RS232 command for
Telnet-Control.
Limitation 3 for Telnet-Control: Minimum delay for next RS232 command must be more than 200 (ms).
(*, In Windows built-in “TELNET.exe” utility, pressing the Enter button will create a “Carriage-Return”
and “New-Line” code.)
Communications
—
51 —
DLP Projector — Owner’s Manual
Maintenance and Security
Replacing the Projection Lens
Perform the following to replace the projection lens:
1. Center the lens. Use the Lens H or Lens V button (on the remote control) to adjust the lens at its center
position.
Important:
•
•
Ensure that the lens is at or near its center position.
Attempting to remove the lens when at a large offset may cause damage to the lens assembly.
2. Press “
” on the built-in keypad or press “
cooling down.
” on the remote control twice to turn off the projector after
3. Remove the lens cover from the lens.
4. Rotate the lens counter-clockwise to disengage it from
the lens mount.
5. Remove the lens out of the lens mount.
6. With the label “TOP” on the lens assembly facing up,
install the new lens. See “Installing the Projection Lens”
on page 10.
—
52 —
DLP Projector — Owner’s Manual
Cleaning the Projector
Cleaning the projector to remove dust and grime will help ensure trouble-free operation.
Warning:
•
•
•
•
Be sure to turn off and unplug the projector at least 30 minutes before cleaning. Failure to do so
could result in a severe burn.
Use only a dampened cloth when cleaning. Do not allow water to enter the ventilation openings on
the projector.
If a little water gets into the projector interior while cleaning, leave unplugged in a well-ventilated
room for several hours before using.
If a lot of water gets into the projector interior when cleaning, have the projector serviced.
Cleaning the Lens
You can purchase Optical lens cleaner from most camera stores. Refer to the following to clean the
projector lens.
1. Apply a little Optical lens cleaner to a clean soft cloth. (Do not apply the cleaner directly to the lens.)
2. Lightly wipe the lens in a circular motion.
Caution:
•
•
Do not use abrasive cleaners or solvents.
To prevent discoloration or fading, avoid getting cleaner on the projector case.
Cleaning the Case
Refer to the following to clean the projector case.
1. Wipe off dust with a clean dampened cloth.
2. Moisten the cloth with warm water and mild detergent (such as used to wash dishes), and then wipe the
case.
3. Rinse all detergent from the cloth and wipe the projector again.
Caution:
To prevent discoloration or fading of the case, do not use abrasive alcohol-based cleaners.
—
53 —
DLP Projector — Owner’s Manual
Using the Kensington® Lock
If you are concerned about security, attach the projector to a permanent object with the Kensington slot
and a security cable.
12V OUT
Max. 0.35A
REMOTE IN
HDBaseT
LAN
DVI-D
HDMI1
USB POWER OUT
(5V Max. 0.5A)
VGA IN
3G-SDI IN
HDMI2
3D SYNC IN
3D SYNC
OUT
RS-232C
VGA OUT
Note:
Contact your vendor for details on purchasing a suitable Kensington security cable.
The security lock corresponds to Kensington’s MicroSaver Security System. If you have any comment,
contact: Kensington, 2853 Campus Drive, San Mateo, CA 94403, U.S.A. Tel: 800-535-4242,
http://www.Kensington.com.
—
54 —
DLP Projector — Owner’s Manual
Troubleshooting
Common Problems and Solutions
These guidelines provide tips to deal with problems you may encounter while using the projector. If
the problem remains unsolved, contact your dealer for assistance.
Often after time spent troubleshooting, the problem is traced to something as simple as a loose
connection. Check the following before proceeding to the problem-specific solutions.
¾¾ Use some other electrical device to confirm that the electrical outlet is working.
¾¾ Ensure the projector is turned on.
¾¾ Ensure all connections are securely attached.
¾¾ Ensure the attached device is turned on.
¾¾ Ensure a connected PC is not in suspending mode.
¾¾ Ensure a connected notebook computer is configured for an external display.
(This is usually done by pressing an Fn-key combination on the notebook.)
Tips for Troubleshooting
• In each problem-specific section, try the steps in the order suggested. This may help you to solve the
problem more quickly.
• Try to pin point the problem and thus avoid replacing non-defective parts. For example, if you replace
batteries and the problem remains, put the original batteries back and go to the next step.
• Keep a record of the steps you take when troubleshooting: The information may be useful when calling
for technical support or for passing on to service personnel.
—
55 —
DLP Projector — Owner’s Manual
LED Error Messages
The LED status indicators are located on the top of the projector. Each LED is defined below.
Message
Light LED
Status LED
AV Mute LED
Green
Orange
Red
Green
Orange
Red
Green
Orange
Standby State(*)
-
-
-
Flashing
-
-
-
-
Power on
(Warm up)
-
-
-
-
Flashing
-
-
-
Power on &
Laser diode on
Steady
-
-
Steady
-
-
Steady
-
Power off
(Cooling down)
-
-
-
-
Flashing
-
-
-
AV mute is off
(Image is displayed)
Steady
-
-
Steady
-
-
Steady
-
AV mute is on
(Image is black)
Steady
-
-
Steady
-
-
-
Steady
Projector
communication
Steady
-
-
Flashing
-
-
Steady
-
Firmware upgrade
-
-
-
Flashing Flashing
-
-
-
Error
(Over temperature)
-
-
-
-
-
Steady
-
-
Error
(Fan failure)
-
-
-
-
-
Flashing
-
-
—
56 —
DLP Projector — Owner’s Manual
Image Problems
Problem: No image appears on the screen
1. Verify the settings on your notebook or desktop PC.
2. Turn off all equipment and power on again in the correct order.
Problem: The image is blurred
1. Press the Focus button to adjust the focus on the projector.
2. Press the Auto button on the remote control to automatically optimize image.
3. Ensure the projector-to-screen distance is within the specified range.
4. Check that the projector lens is clean.
Problem: The image is wider at the top or bottom (trapezoid effect)
1. Position the projector so it is as perpendicular to the screen as possible.
2. Press the Keystone H or Keystone V button on the remote control to correct the problem.
Problem: The image is reversed
Check the Rear Projection on the Setup menu of the OSD.
Problem: The image is streaked
1. Set the Phase setting on the Picture menu of the OSD to the default settings.
2. Ensure the problem is not caused by a connected PC’s video card, connect to another computer.
Problem: The image is flat with no contrast
Adjust the Contrast setting on the Picture menu of the OSD.
Problem: The color of the projected image does not match the source image
Adjust the Color Temperature and Gamma settings on the Picture > Advanced menu of the OSD.
Laser Diode Problems
Problem: There is no light from the projector
1. Check that the power cable is securely connected.
2. Ensure the power source is good by testing with another electrical device.
3. Restart the projector in the correct order and check that the Light LED is green.
—
57 —
DLP Projector — Owner’s Manual
Problem: The laser diode goes off
1. Power surges can cause the laser diode to turn off. Re-plug power cord. If the Light LED is in orange,
this indicates that the laser diode time has expired. Then press “
on the remote control to turn off the projector.
” on the built-in keypad or press “
”
2. Have the projector serviced.
Remote Control Problems
Problem: The projector does not respond to the remote control
1. Direct the remote control towards remote sensor on the projector.
2. Ensure the path between remote and sensor is not obstructed.
3. Turn off any fluorescent lights in the room.
4. Make sure that the batteries are installed with the correct polarity.
5. Replace the batteries.
6. Turn off other Infrared-enabled devices in the vicinity.
7. Have the remote control serviced.
Having the Projector Serviced
If you are unable to solve the problem, you should have the projector serviced. Pack the projector in the
original carton. Include a description of the problem and a checklist of the steps you took when trying to fix
the problem. The information may be useful to service personnel. For servicing, return the projector to the
place you purchased it.
—
58 —
DLP Projector — Owner’s Manual
HDMI Q & A
Q. What is the difference between a “Standard” HDMI cable and a “High-Speed” HDMI
cable?
Recently, HDMI Licensing, LLC announced that cables would be tested as Standard or High- Speed
cables.
• Standard (or “category 1”) HDMI cables have been tested to perform at speeds of 75Mhz or up to
2.25Gbps, which is the equivalent of a 720p/1080i signal.
• High Speed (or “category 2”) HDMI cables have been tested to perform at speeds of 340Mhz or up to
10.2Gbps, which is the highest bandwidth currently available over an HDMI cable and can successfully
handle 1080p signals including those at increased color depths and/or increased refresh rates from the
Source. High-Speed cables are also able to accommodate higher resolution displays, such as WQXGA
cinema monitors (resolution of 2560 x 1600).
Q. How do I run HDMI cables longer than 10 meters?
There are many HDMI Adopters working on HDMI solutions that extend a cable’s effective distance from
the typical 10 meter range to much longer lengths. These companies manufacture a variety of solutions
that include active cables (active electronics built into cables that boost and extend the cable’s signal),
repeaters, amplifiers as well as CAT5/6 and fiber solutions.
Q. How can I tell if a cable is an HDMI certified cable?
All HDMI products are required to be certified by the manufacturer as part of the HDMI Compliance Test
Specification. However, there may be instances where cables bearing the HDMI logo are available but
have not been properly tested. HDMI Licensing, LLC actively investigates these instances to ensure that
the HDMI trademark is properly used in the market. We recommend that consumers buy their cables from
a reputable source and a company that is trusted.
For more detail information check http://www.hdmi.org/learningcenter/faq.aspx#49.
—
59 —
DLP Projector — Owner’s Manual
Specifications
Specifications
Item
Description
Display type
0.67” WUXGA DMD
Resolution
WUXGA (1920 x 1200)
Zoom/focus
Power zoom and focus
Zoom ratio
Depend on Lens
Keystone correction
Vertical: +/- 20 degrees, Horizontal: +/- 20 degrees
Projection methods
Front, Rear, Desktop/Ceiling (Rear, Front)
Data compatibility
VGA, SVGA, XGA, WXGA, SXGA, SXGA+, UXGA, WUXGA, HD, UHD, Mac
Video compatibility
4K/2K, 1080 i/p, 720p, 576 i/p, 480 i/p
H-Sync
15, 31~135KHz
V-Sync
24 ~ 30Hz, 47 ~ 120Hz
Safety Certification
UL/cUL, FCC, CE, CB, CCC (China), KC/KCC
Operation temperature
5° ~ 40°C
Dimensions (W x H x D)
484 x 181 x 509 mm (without lens and elevators)
Weight
17.7 kg (EK-812U model)
18.0 kg (EK-818U model)
AC Input
AC 100 ~ 240V @50/60 Hz
Power Consumption
EK-812U:
- 290W (ECO brightness mode) ; 585W (Normal brightness mode)
EK-818U:
- 315W (ECO brightness mode) ; 650W (Normal brightness mode)
Laser Diode Power
EK-812U 95W+95W @3A
EK-818U 115W+95W @3A
Laser Diode Life
20,000 Hours at Normal Mode
Input Terminals
2 x HDMI (version2.0) (with locking screw)
1 x HDBaseT
1 x DVI-D (only support digital signal)
1 x 3D SYNC In
1 x VGA In (D-Sub 15pin) (Computer In or
Component)
1 x 3G SDI
Output Terminals
1 x VGA Out (Support VGA loops through to
monitor) (Monitor Out)
1 x 3D SYNC Out
1 x DC12V Out
Control Terminals
Security
1 x RS232 (D-sub 9 pin) (PC Control)
1 x RJ45 (LAN)
1 x Wired In (3.5mm phone jack) (Remote In)
1 x USB (WiFi dongle support)
Kensington lock
Security bar
Note:
For questions regarding product specifications, please contact your local distributor.
—
60 —
DLP Projector — Owner’s Manual
Projection Distance vs. Projection Size
V
H
Screen
center
b1
b2
(27.69)mm
b3
Optical axis
a0
a0: Distance from Mirror to Screen
Projection Distance and Size Table
Platform
WUXGA (16:10)
DMD
0.67”
A16
A01
A06
A03
A13
A15
Projection Lens
Ultra Short
Throw
Wide Zoom
Standard
Long Zoom
Ultra-Long Zoom
Short Throw
Throw Ratio
0.361 (120”)
0.95-1.22
1.22-1.52
1.52-2.92
2.90-5.50
0.75-0.95
Zoom Ratio
N/A
1.28X
1.25X
1.9X
1.9X
1.26X
Projection Distance (m)
(min/max)
0.96-3.01m
1.01-7.98m
1.29-9.93m
1.61-19.00m
3.18-34.77m
0.79-6.21m
Projection Screen Size
Throw Ratio Spec.
Diagonal Height
(inch)
(m)
Projection distance (m)
0.361 (120”)
Width
(m)
(m)
0.95
1.22
1.22
Min (m) Max (m) Min (m)
1.52
1.52
Max (m)
Min (m)
2.92
2.9
Max (m) Min (m)
5.5
0.75
0.95
Max (m)
Min (m)
Max (m)
50
0.67
1.08
NA
1.01
1.31
1.29
1.62
1.61
3.12
3.18
5.89
0.79
1.01
60
0.81
1.29
NA
1.22
1.57
1.56
1.95
1.94
3.76
3.78
7.05
0.96
1.22
70
0.94
1.51
NA
1.43
1.84
1.82
2.29
2.27
4.39
4.39
8.20
1.12
1.43
80
1.08
1.72
NA
1.63
2.11
2.09
2.62
2.60
5.03
5.00
9.36
1.28
1.64
90
1.21
1.94
NA
1.84
2.38
2.35
2.95
2.94
5.66
5.61
10.51
1.45
1.85
100
1.35
2.15
NA
2.05
2.64
2.62
3.28
3.27
6.30
6.21
11.67
1.61
2.05
110
1.48
2.37
NA
2.26
2.91
2.89
3.62
3.60
6.93
6.82
12.82
1.78
2.26
120
1.62
2.58
0.96
2.47
3.18
3.15
3.95
3.94
7.57
7.43
13.98
1.94
2.47
130
1.75
2.80
1.04
2.67
3.44
3.42
4.28
4.27
8.20
8.04
15.13
2.10
2.68
140
1.88
3.02
1.11
2.88
3.71
3.69
4.61
4.60
8.84
8.65
16.29
2.27
2.89
150
2.02
3.23
1.18
3.09
3.98
3.95
4.95
4.94
9.47
9.25
17.44
2.43
3.09
160
2.15
3.45
1.26
3.30
4.24
4.22
5.28
5.27
10.11
9.86
18.60
2.60
3.30
170
2.29
3.66
1.33
3.51
4.51
4.48
5.61
5.60
10.74
10.47
19.75
2.76
3.51
180
2.42
3.88
1.40
3.72
4.78
4.75
5.94
5.93
11.38
11.08
20.91
2.92
3.72
190
2.56
4.09
1.48
3.92
5.05
5.02
6.27
6.27
12.01
11.69
22.06
3.09
3.93
200
2.69
4.31
1.55
4.13
5.31
5.28
6.61
6.60
12.65
12.29
23.22
3.25
4.13
250
3.37
5.38
1.91
5.17
6.65
6.61
8.27
8.27
15.82
15.33
28.99
4.07
5.17
300
4.04
6.46
2.28
6.21
7.98
7.95
9.93
9.93
19.00
18.37
34.77
4.89
6.21
350
4.71
7.54
2.65
NA
Note:
•
•
The values in the tables are approximate and may be slightly different from the actual measurements.
In case of ceiling mount, it is necessary to match at the spot.
—
61 —
DLP Projector — Owner’s Manual
Timing Mode Table
Signal
Type
PC
Resolution
Frame
(Hz)
rate
VGA
HDMI1
HDMI2
DVI
3G-SDI
HDBaseT
640x480
60
V
V
V
V
—
V
640x480
72
V
V
V
V
—
V
640x480
75
V
V
V
V
—
V
640x480
85
V
V
V
V
—
V
640x480
66.6
—
V
V
V
—
V
720x400
70
V
V
V
V
—
V
800x600
60
V
V
V
V
—
V
800x600
72
V
V
V
V
—
V
V
V
800x600
75
V
V
V
V
—
800x600
85
V
V
V
V
—
800x600
120
V
V
V
V
—
V
832x624
75
V
V
V
V
—
V
848x480
50
—
V
V
V
—
V
848x480
60
—
V
V
V
—
V
848x480
75
—
V
V
V
—
V
848x480
85
—
V
V
V
—
V
1024x768
60
V
V
V
V
—
V
1024x768
75
V
V
V
V
—
V
1024x768
85
V
V
V
V
—
V
1024x768
120
V
V
V
V
—
V
1152x720
50
—
V
V
V
—
V
1152x720
60
—
V
V
V
—
V
1152x720
75
—
V
V
V
—
V
1152x720
85
—
V
V
V
—
V
1152x864
60
V
V
V
V
—
V
1152x864
70
V
V
V
V
—
V
1152x864
75
V
V
V
V
—
V
1152x864
85
V
V
V
V
—
V
1152x870
75
—
V
V
V
—
V
1280x720
50
—
V
V
V
—
V
1280x720
60
V
V
V
V
—
V
1280x720
75
V
V
V
V
—
V
1280x720
85
V
V
V
V
—
V
1280x720
120
V
V
V
V
—
V
1280x768
60
V
V
V
V
—
V
1280x768
75
V
V
V
V
—
V
1280x768
85
V
V
V
V
—
V
1280x800
50
V
V
V
V
—
V
1280x800
60
V
V
V
V
—
V
1280x800
75
V
V
V
V
—
V
1280x800
85
V
V
V
V
—
V
1280x960
50
—
V
V
V
—
V
—
62 —
DLP Projector — Owner’s Manual
Signal
Type
PC
NTSC
PAL
SECAM
SDTV
EDTV
HDTV
Resolution
Frame
(Hz)
rate
VGA
HDMI1
HDMI2
DVI
3G-SDI
HDBaseT
1280x960
60
V
V
V
V
—
V
1280x960
75
V
V
V
V
—
V
1280x960
85
V
V
V
V
—
V
V
V
1280x1024
50
—
V
V
V
—
1280x1024
60
V
V
V
V
—
1280x1024
75
V
V
V
V
—
V
1280x1024
85
V
V
V
V
—
V
1360x768
50
—
V
V
V
—
V
1360x768
60
—
V
V
V
—
V
1360x768
75
—
V
V
V
—
V
1360x768
85
—
V
V
V
—
V
1368x768
60
V
V
V
V
—
V
1400x1050
50
—
V
V
V
—
V
1400x1050
60
—
V
V
V
—
V
1400x1050
75
V
V
V
V
—
V
1440x900
60
V
V
V
V
—
V
1440x900
75
—
V
V
V
—
V
1600x900
60
—
V
V
V
—
V
1600x1200
60
V
V
V
V
—
V
1680x1050
60
V
V
V
V
—
V
1920X1080
50
—
V
V
V
—
V
1920X1080
60
V
V
V
V
—
V
1920X1200RB
60
V
V
V
V
—
V
1920X1200RB
50
V
V
V
V
—
V
NTSC (M, 4.43)
60
—
—
—
—
—
—
PAL (B,G,H,I)
50
—
—
—
—
—
—
PAL (N)
50
—
—
—
—
—
—
PAL (M)
60
—
—
—
—
—
—
SECAM (M)
50
—
—
—
—
—
—
480i
60
V
V
V
V
—
V
576i
50
V
V
V
V
—
V
480p
60
V
V
V
V
—
V
576p
50
V
V
V
V
—
V
1080i
25
V
V
V
V
—
V
1080i
29
V
V
V
V
—
V
1080i
30
V
V
V
V
—
V
720p
50
V
V
V
V
—
V
720p
59
V
V
V
V
—
V
720p
60
V
V
V
V
—
V
1080p
23
V
V
V
V
—
V
1080p
24
V
V
V
V
—
V
1080p
25
V
V
V
V
—
V
1080p
29
V
V
V
V
—
V
—
63 —
DLP Projector — Owner’s Manual
Signal
Type
HDTV
Mandatory
3D
Frame
sequential
3D
SD-SDI
Resolution
Frame
(Hz)
rate
VGA
HDMI1
HDMI2
DVI
3G-SDI
HDBaseT
1080p
30
V
V
V
V
—
V
1080p
50
V
V
V
V
—
V
1080p
59
V
V
V
V
—
V
1080p
60
V
V
V
V
—
V
Frame Packing
1080p
24
—
V
V
V
—
V
Frame Packing
720p
50
—
V
V
V
—
V
Frame Packing
720p
60
—
V
V
V
—
V
Side by Side
1080i
50
—
V
V
V
—
V
Side by Side
1080i
60
—
V
V
V
—
V
Top and Bottom
720p
50
—
V
V
V
—
V
Top and Bottom
720p
60
—
V
V
V
—
V
Top and Bottom
1080p
24
—
V
V
V
—
V
800x600
120
—
V
V
V
—
V
1024x768
120
—
V
V
V
—
V
1280x720
120
—
V
V
V
—
V
V
1080P
120
—
V
V
V
—
1080P
60
—
V
V
V
—
V
WUXGA
60
—
V
V
V
—
V
480i YcbCr422
10bit
59.94
—
—
—
—
V
—
576i YcbCr422
10bit
50
—
—
—
—
V
—
50
—
—
—
—
V
—
720p YcbCr422
10bit
1080i YcbCr422
10bit
HD-SDI
1080p
YcbCr422 10bit
1080sF
YcbCr422 10bit
59.94
—
—
—
—
V
—
60
—
—
—
—
V
—
50
—
—
—
—
V
—
59.94
—
—
—
—
V
—
60
—
—
—
—
V
—
23.98
—
—
—
—
V
—
24
—
—
—
—
V
—
25
—
—
—
—
V
—
29.97
—
—
—
—
V
—
30
—
—
—
—
V
—
25
—
—
—
—
V
—
29.97
—
—
—
—
V
—
30
—
—
—
—
V
—
—
64 —
DLP Projector — Owner’s Manual
Signal
Type
Resolution
3GA-SDI
1080p
YcbCr422 10bit
3GB-SDI
1080p
YcbCr422 10bit
With 352M
Payload ID
3840x2160
4K
4096x2160
Frame
(Hz)
rate
50
VGA
HDMI1
HDMI2
DVI
3G-SDI
HDBaseT
—
—
—
—
V
—
59.94
—
—
—
—
V
—
60
—
—
—
—
V
—
50
—
—
—
—
V
—
59.94
—
—
—
—
V
—
60
—
—
—
—
V
—
23.976
—
V
V
V
—
V
24.000
—
V
V
V
—
V
25.000
—
V
V
V
—
V
29.970
—
V
V
V
—
V
30.000
—
V
V
V
—
V
50.000
—
V
V
—
—
—
59.940
—
V
V
—
—
—
60.000
—
V
V
—
—
—
23.976
—
V
V
V
—
V
24.000
—
V
V
V
—
V
25.000
—
V
V
V
—
V
29.970
—
V
V
V
—
V
30.000
—
V
V
V
—
V
50.000
—
V
V
—
—
—
59.940
—
V
V
—
—
—
60.000
—
V
V
—
—
—
V : Frequency supported
— : Frequency not supported
4K True Video
—
65 —
DLP Projector — Owner’s Manual
Projector Dimensions
—
66 —
509.0 mm
529.0 mm
180.2 mm
191.0 mm
484.0 mm
DLP Projector — Owner’s Manual
Regulatory Compliance
FCC Warning
This equipment has been tested and found to comply with the limits for a Class A digital device pursuant
to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used
in accordance with the instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference in which case the
user will be required to correct the interference at his/her own expense.
Changes or modifications not expressly approved by the parties responsible for compliance could void the
user’s authority to operate the equipment.
Canada
This class A digital apparatus complies with Canadian ICES-003.
Safety Certifications
UL/cUL, FCC, CE, CB, CCC (China), KC/KCC
—
67 —
U.S.A.
Canada
Deutschland & Österreich
Eastern Europe
South East Asia
Oceania
China
Japan & Worldwide
EIKI International, Inc.
30251 Esperanza
Rancho Santa Margarita
CA 92688-2132
U.S.A.
Tel: +1 800-242-3454 +1 949-457-0200
Fax: +1 800-457-3454 +1 949-457-7878
E-Mail: usa@eiki.com
EIKI Deutschland GmbH
Am Frauwald 12
65510 Idstein
Deutschland
Tel: +49 6126-9371-0
Fax: +49 6126-9371-11
E-Mail: info@eiki.de
EIKI Industrial (M) Sdn Bhd
No. 11, Nouvelle Industrial Park,
Lorong Teknologi B, Taman Sains
Selangor 1, Kota Damansara PJU5,
47810 Petaling Jaya, Selangor Darul Ehsan,
Malaysia
Tel: +60 3-6157-9330
Fax: +60 3-6157-1320
E-Mail: sales@eiki.my
EIKI (Shanghai) Co., Ltd.
LAKESIDE OASIS MIDDLE RING
BUSINESS CENTRE
Block 1,Room 606,
1628, Jin Sha Jiang Road
Shanghai, 200333
CHINA
Tel:
+86 21-3251-3993
Service Hot line: +86 21-3251-3995
Fax:
+86 21-3251-3997
E-mail: info@eiki-china.com
EIKI CANADA - Eiki International, Inc.
9170 County Road 93, Suite 304,
Midland, ON, L4R 4K4, Canada
Tel: +1 800-563-3454
+1 705-527-4084
E-Mail: canada@eiki.com
EIKI CZECH SPOL. S.R.O.
Branicka 416/237
140 00 Praha 4
Czech Republic
Tel: +420 241-410-928
+420 241-403-095
Fax: +420 241-409-435
E-Mail: info@eiki.cz
EIKI AUSTRALIA PTY LTD
Level 5, 11 Queens Road,
Melbourne, Victoria 3004
Tel: +61 03-8530-7048
Fax: +61 03-9820-5834
E-Mail: sales@eiki.net.au
EIKI Industrial Company Limited.
6-23 Teramoto, Itami-shi, Hyogo,
664-0026 JAPAN
Tel: +81 72-782-7492
Fax: +81 72-781-5435
WorldWide Website https://global.eiki.com
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising