Omega | DPF143/144 | Owner Manual | Omega DPF143/144 Owner Manual

Omega DPF143/144 Owner Manual
User’s Guide
DPF143W - wall mounted
DPF144W - wall mounted
DPF143P - panel mounted
DPF144P - panel mounted
Shop online at
omega.com
SM
e-mail: info@omega.com
For latest product manuals:
www.omegamanual.info
With optional cover
DPF143/144
Rate/Total Indicator
omega.com info@omega.com
U.S.A.
Headquarters:
Servicing North America:
Omega Engineering, Inc.
Toll-Free: 1-800-826-6342 (USA & Canada only)
Customer Service: 1-800-622-2378 (USA & Canada only)
Engineering Service: 1-800-872-9436 (USA & Canada only)
Tel: (203) 359-1660
Fax: (203) 359-7700
e-mail: info@omega.com
For Other Locations Visit omega.com/worldwide
The information contained in this document is believed to be correct, but OMEGA accepts no liability for any errors it contains, and reserves
the right to alter specifications without notice.
TABLE OF CONTENTS
DPF143/144 SERIES INSTRUCTIONS
General Information
General Information................................................................................................................................................................Page 4
Specifications.............................................................................................................................................................................Page 4
Features........................................................................................................................................................................................Page 5
Options.........................................................................................................................................................................................Page 4
Accessories.................................................................................................................................................................................Page 5
Pulse Output Function Table................................................................................................................................................Page 6
Installation
Wall Mount.................................................................................................................................................................................Page 7
Meter Mount..............................................................................................................................................................................Page 7
Panel Mount...............................................................................................................................................................................Page 7
Connections
Connections for DPF143/3-Wire Mechanical Meter...................................................................................................Page 8
Connections for DPF143-DPS/DPF144-DPS—115Vac Option................................................................................Page 9
Connections for DPF144/3-Wire Mechanical/Dual Scaled Pulse Out..................................................................Page 9
Connections for DPF144/FMG900/980 Series..............................................................................................................Page 10
Connections for DPF144-DPS/FMG900/980 Series....................................................................................................Page 10
Settings
K-Factor........................................................................................................................................................................................Page 11
Changing Flow Indicator Settings......................................................................................................................................Page 11
Menu Navigation....................................................................................................................................................................Page 11
The DPF144 Secondary Menu Functions........................................................................................................................Page 13
Troubleshooting
Problem, Probable Causes, Things to Try.......................................................................................................................Page 14
Page 3
omega.com
GENERAL INFORMATION
DPF143/144 SERIES INSTRUCTIONS
The DPF143/144 flow computers are microcontrollerbased indicator/transmitters that interface with pulse
output flow sensors to compute and display flow rate, flow
total, and also generate output signals representing flow.
The DPF143 has one scaled pulse output and one pulse
pass through. The DPF144 has two scaled pulse outputs.
Galvanic isolation is provided for most pulse outputs.
The DPF143 may be powered by an external DC power
source or an optional internal AC power supply*. The
DPF144 is a “two-wire” or “loop powered” device, meaning
that it is powered by the 4-20 mA loop circuit itself. An
optional internal AC power supply* is available for the
DPF144 with dual 24 and 12VDC outputs to power both
the loop and sensors requiring more power than the loop
can supply.
Pulse and 4-20mA analog outputs can be used to signal
external devices, e.g. certain metering pumps and water
treatment controls. Alternatively, one or more pulse
outputs can be configured as alarm outputs. These flow
computers can be password protected to prevent resetting
the total or changing configuration settings.
The DPF143/144 meters are available in wall and meter
mount configurations, and can also be panel mounted.
Some configurations can be converted from wall to meter
or meter to wall after installation if needed. Consult Omega
for details.
Order the DPF144 only if a 4-20mA output signal is
a requirement. Otherwise the DPF143 offers the most
flexibility.
*Internal power supply is available for the wall mount option only.
Specifications*
DPF143 Series
Power
DPF144 Series
7-30Vdc, 4mA
7-30Vdc, 4mA (4-20 mA when loop-powered)
Rate
5-digit autorange
5-digit autorange
Total
8-digit
8-digit
Rate Units
Gallons/Second/Minute/Hour/Day, Liter/Second/Minute/Hour/Day, Cubic Feet/Second/Minute/Hour/Day, Cubic
Meters/Second/Minute/Hour/Day, Miner’s Inch, Mega Liters/Day, Million Gallons/Day, Fluid Oz/Second/Minute/
Hour/Day, Barrels(42 gal)/ Second/Minute/Hour/Day
Total Units
Gallon, Gallon x 1000, Liters, Mega Liter, Cubic Meter, Acre Feet, Cubic Feet,
Cubic Feet x 1000, Million Gallon, Miner’s Inch Day, Acre Inch, Fluid Ounce, Barrels(42 gal)
Pulse Output 1
Scaled pulse output, high alarm output or low alarm output - optoisolated 1
Pulse Output 2
Pulse pass through
Scaled pulse output, high alarm output or low alarm
output 1
Loop Power
Output
N/A
4-20mA Loop
Set P Range
0.1 - 99999.9 units/pulse
0.1 - 99999.9 units/pulse
Input
5V pulse or contact closure
5V pulse or contact closure
Input Range
0.752 - 2000Hz
0.752 - 2000Hz
K-Factor Range
.001 - 999999.999
.001 - 999999.999
Flow Alarm Output
Range
0.1 - 99999.9
0.1 - 99999.9
Operating Temperature
0˚ to 55˚ C (-32˚ to 131˚ F)
0˚ to 55˚ C (-32˚ to 131˚ F)
Non-Operating
Temperature
-40˚ to 75˚ C (-40˚ to 158˚ F)
-40˚ to 75˚ C (-40˚ to 158˚ F)
Environmental
NEMA 4X, IP67
NEMA 4X, IP67
Display
Units
Outputs
Regulatory
Mark
Mark
* Specifications subject to change. Please consult our website for current data (omega.com).
1 Scaled output pulses have a fixed width of 100ms. Maximum pulses per second is 6.5Hz
2 For pulse frequencies <1 Hz, increase setting in SET F menu to 3 or higher.
Page 4
omega.com
DPF143/144 SERIES INSTRUCTIONS
Features
Hinged Display Cover
(Optional - DPF140-HC)
Display
Electronics Module
Setup Keys*
Lower Housing
Wall-Mount Brackets
Cable Gland Strain Relief
* Includes password protection for tamper prevention when needed
Options
Description
Option #
Tamper-evident kit, wire seal
TE
Non-resettable total
NR
Hinged display cover
HC
Built-in dual power supply
DPS
Built-in single power supply
SPS
Accessories
Description
Electronics
module
Lower wall
housing
Lower meter
housing
Convert wall to meter mount
DPF140-MK10
Blue
Blue
Blue
Convert wall to meter mount
DPF140-MK15
White
White
White
Convert meter to wall mount
FTB700D-WMB
Blue
Blue
Blue
Convert meter to wall mount
DPF140-MK25
White
White
White
Adapter kit to mount white electronics to blue housing
DPF140-W2M
White
Blue
Blue
Adapter kit to mount white electronics to blue housing/
Temper evident
DPF140-W2M-TE
White
Blue
Blue
Hinged display cover kit
DPF140-HC
White
n/a
n/a
Page 5
omega.com
GENERAL INFORMATION
DPF143/144 SERIES INSTRUCTIONS
Pulse Output Function Table
PULSE OUTPUT 1 (SCALED)
DPF143
DPF144
TYPE
Current sinking
Current sinking
MAX. VOLTAGE
45 Vdc
45 Vdc
MAX. CURRENT
100 mA
100 mA
MAX. FREQUENCY
6.5 Hz
6.5 Hz
PULSE WIDTH
100 ms
100 ms
ISOLATION
300 V
300 V
CONFIGURABLE AS ALARM
YES (High or Low)
YES (High or Low)
PULSE OUTPUT 2 (SCALED)
DPF143
DPF144 (Note 2)
TYPE
Current sinking
MAX. VOLTAGE
45 Vdc
MAX. CURRENT
100 mA
Not Available
MAX. FREQUENCY
6.5 Hz
PULSE WIDTH
100 ms
ISOLATION
300 V
CONFIGURABLE AS ALARM
YES (High or Low)
PULSE OUTPUT 2 (PASS-THROUGH)
DPF143
TYPE
Current sinking
MAX. VOLTAGE
45 Vdc
MAX. CURRENT
10 mA
MAX. FREQUENCY
2000 Hz NOTE 2
PULSE WIDTH
SAME AS SENSOR INPUT
ISOLATION
300 V
CONFIGURABLE AS ALARM
NO
NOTE 1: 150 V effective isolation when using Omega micropower sensors. •
DPF144
Not Available
NOTE 2: With 2000 ohm or lower pull-up resistance.
Page 6
omega.com
INSTALLATION
DPF143/144 SERIES INSTRUCTIONS
0.10 (2.5)
#10
Screw
.10"
0.78
.78"
(19.8)
0.50
(12.7)
.50"
3.37
3.374
(85.6)
4.10 4.33
2.50
(63.5) (104.1) (110)
Meter Mount
Sensor Wires
Sensor Wires
#10
Screw
4.10 (104.1)
4.35 (110.5)
4.77 (121.2)
Dimensions are in Inches (Millimeters)
Wall Mount. To mount an DPF143/144 indicator to the
wall, hold the unit in the desired position, mark the holes
in the mounting feet, drill and mount with screws. A metermounted indicator can be converted to a wall mount using
an adapter mounting kit.
Meter Mount. If the DPF143/144 indicator was ordered
as a meter mount model, the housing is already mounted
directly to the flow sensor and needs no further installation.
An DPF143/144 module can be converted from a wallmount to a meter-mount using the mounting kit that
includes a lower housing and associated hardware and
installs as follows:
1.
Remove the strain relief through which the flow
sensor cable runs.
2.
Cut the cable to about 6” in length. Carefully strip
the cable jacket to expose the three colored wires
(red, white, and black) inside.
Panel Mount. Using the “Panel Cutout” drawing as a guide,
cut a hole in the panel. Place the DPF143/144 indicator on
the panel and mark the holes, drill, and mount with the
supplied screws and washers.
3.56 (90.4)
Panel Cutout
3.
Route the wires through the threaded connector
pre-installed in the bottom of the housing.
4.
Start the threaded connector into the female thread
on the top of the flow sensor. Be sure to match the
oblong shape on the bottom of the housing to the
depression on the top of the flow sensor.
5.
Using an ordinary screwdriver inserted in one side
of the slot (see drawing), tighten the screw as much
as possible.
6.
Strip the wire ends, make the connections to the
indicator as shown in Connections Diagrams, and
then use the cover screws to attach the indicator to
the top of the housing.
Page 7
2.4 (61) TYP
3.5 (88.9) TYP
(PANEL CUTOUT)
3.56
(90.4)
.218 (5.5)
omega.com
CONNECTION DIAGRAMS
DPF143/144 SERIES INSTRUCTIONS
Connections
To connect the flow computer to a flow sensor or an external device such as a chemical metering pump, follow the
Standard Connections diagrams on this and the following pages.
Connections for DPF143/3-Wire Mechanical Meter
DPF143
FT430
_
_
+
_
_
+
_
+
S
+
+
+
_
_
+
PULSE
OUT 1
SENSOR
WHITE
RED
+
S
BLACK
_
ENGD
+
PULSE
OUT 2
7-45Vdc
Supply
POWER
_
Pulse
Pass-thru
Pulse Responsive
Metering Pump
Flow
Sensor
Page 8
omega.com
CONNECTION DIAGRAMS
DPF143/144 SERIES INSTRUCTIONS
Connections for DPF143-DPS/DPF144-DPS—115Vac Option
+
4-20mA
Device
12V
Device
_
_
Dashed line shows (-) terminal connection
if 4-20mA device is not used (e.g.
(e.g.DPF143)
FT430)
12Vdc
_ +
_
24Vdc
POWER
_
_
+
+
ENGD
+
S
+
L
N
G
PULSE
OUT 1
SENSOR
_
+
PULSE
OUT 2
_
_
+
+
BLACK
WHITE
GREEN
DPF143-DPS
FT430-139
FT440-139
DPF144-DPS
FT430/FT440
DPF143/DPF144
(Dual Power Supply)
Lower Housing
To 115Vac
Power Source
Connections for DPF144/3-wire Mechanical/ Dual Scaled Pulse Out
DPF144
FT440
BLACK
+
_
_
+
_
_
+
_
+
S
+
+
+
_
_
+
PULSE
OUT 1
SENSOR
WHITE
RED
_
S
+
PULSE
OUT 2
9-30 Vdc
Loop Power
Supply
+
POWER
_
4-20mA
Device
ENGD
_
Electronic
Metering Pumps
Flow
Sensor
Page 9
omega.com
CONNECTION DIAGRAMS
DPF143/144 SERIES INSTRUCTIONS
Connections for DPF144/FMG900/980 Series
Red
+
4-20mA
Device
_
DPF144
FT440
Black
_
9-30 Vdc
Power Supply
Status
LED
POWER
S
_
+
_
_
_
+
S
_
+
+
PULSE
OUT 1
6
+
+ Red
+
PULSE
OUT 2
Power
4 5
+ -
+
_ Black
_
White
Green
SENSOR
Forward
Output
_
_
S
Output
Option
Only
1 2 3
+ Reverse
12
-2
4V
dc
Red
ENGD
Zero
Adj
M
a
30 x 6m
Vd A
c
+
_
12 Vdc
Power Supply
+
Connections for DPF144-DPS/FMG900/980 Series
+
4-20mA
Device
_
Dashed line shows (-) terminal connection
if 4-20mA device is not used
12Vdc
_ +
_
_
24Vdc
Status
LED
_
+
s
_
S
+
+
PULSE
OUT 1
_
PULSE
OUT 2
+ Red
+
_
SENSOR
6
+
Power
4 5
+ -
Forward
Output
EX Magmeter
POWER
Output
Option
Only
1 2 3
+ Reverse
12
-2
4V
dc
_ White
+ Green
_ Black
_
+
ENGD
Zero
Adj
M
a
30 x 6m
Vd A
c
_
L
N
G
+
+
BLACK
WHITE
GREEN
DPF144-DPS
FT440-139
FT440
DPF144
(Dual Power Supply)
Lower Housing
To 115Vac
Power Source
Page 10
omega.com
SETTINGS
DPF143/144 SERIES INSTRUCTIONS
K-Factor
Menu Navigation
At a minimum, every DPF143/144 flow computer must be
programmed with the “K-factor”. (This is the number of
pulses that the meter produces per gallon of flow.) If you
wish to read in units other than gallons, see below.
The K-factor on any Omega flow sensor fitting or in-line
meter can be found on the model-serial label. The line
reading K = xxxx gives the desired number. For depthadjustable sensors (110, 210, 150, 250 models).
Fixed Depth Meter
The left/right keys are used to move through the menus
and position the cursor during data entry. The up arrow is
used to scroll through the available values that are to be
entered. (examples: numerical values for K factor entry or
selection of units from the available options) The enter key
(represented on the keypad by the check mark) is used to
save selected entries and in conjunction with the exit tab to
move between menu screens. As one navigates the menus
the current parameter setting is shown and instructions are
displayed for how to change the selected parameter.
MAIN MENU
SET K
R UNIT
T UNIT
SET D
086238.235
PRESS
TO SET NUMBER
OF PULSES RECEIVED PER
GALLON OF FLOW
10031295
K: 53.6
MF81T-P200
SET P
Find Your K-Factor Here
RESET
EXIT
All menu screens consist of two rows of tabs surrounding a
dialog box that lets you view and change setup parameters.
SET K
Changing Flow Indicator Settings
THE HOME SCREEN
0.00
SET K
R UNIT
T UNIT
SET D
086238.235
PRESS
TO SET NUMBER
OF PULSES RECEIVED PER
GALLON OF FLOW
GPD
SET P
RESET
EXIT
View or change the K factor. The K factor is the number of
pulses the flow sensor provides for every gallon of flow.
MID
(Note that the decimal is fixed at three places. If you only
have two decimal places for your K-factor, enter a zero for
the third digit. If unable to set K-factor, the unit is "locked"
The HOME Screen, shown above, is the normal screen to prevent tampering.
which displays TOTAL flow volume and flow RATE. The Four R UNIT
buttons below the LCD display are used to access menu
screens for viewing and changing setup parameters.
SET K
R UNIT
T UNIT
SET D
0
FLOW RATE = GPD
PRESS TO SET UNITS
FOR DISPLAY
SET P
RESET
EXIT
View or change the flow rate units
Page 11
omega.com
SETTINGS
DPF143/144 SERIES INSTRUCTIONS
T UNIT
RESET
SET K
R UNIT
T UNIT
TOTAL = GALLONS
PRESS TO SET UNITS
FOR DISPLAY
SET P
RESET
SET D
SET K
PRESS
EXIT
SET D
RESET
EXIT
Reset the total flow volume to zero. This tab is not available
when the -64 non resettable total option is ordered
SET D
EXIT
SET K
R UNIT
T UNIT
SET D
000
PRESS TO CHOOSE
NUMBER OF DECIMAL PLACES
IN TOTAL DISPLAY
RESET
T UNIT
TO RESET TOTAL
SET P
View or change the total volume units
SET P
R UNIT
SET K
R UNIT
T UNIT
SET D
PRESS TO EXIT MENU AND
RETURN TO FLOW DISPLAY
EXIT
SET P
RESET
EXIT
View or change the number of decimals displayed in the
total volume display
Return to the home screen, enter a submenu, or accept a
parameter change
SET P OR SET A
The Exit menu also allows access to the secondary menu,
as described on the next page.
SET K
R UNIT
T UNIT
SET D
00000.0 GALLONS
PRESS TO SET NUMBER OF
GALLONS TOTALIZED PER
PULSE SENT OUT PULSE1
SET P
RESET
EXIT
The factory setting will show Set P which allows one to
view or change the volume of flow totalized per pulse sent
to pulse out 1. The units for Set P follow the units selected
for the rate display. (With EXIT highlighted, pressing the
up arrow four times will allow pulse out 1 to be an alarm.
The alarm can be set to trigger on either a high or low flow
condition as determined by the user.)
SET 20 (DPF144 ONLY)
SET K
R UNIT
T UNIT
SET D
00000.0 GALLONS
PRESS TO SET THE FLOW
RATE AT WHICH 20 mA
(MAX) OUTPUT IS DESIRED
SET P
SET 20
RESET
EXIT
Input the flow rate at which 20 mA (max) output is desired
Page 12
omega.com
SETTINGS
DPF143/144 SERIES INSTRUCTIONS
The DPF144 Secondary Menu Functions
When using the DPF144, a secondary menu is available with
further options. Enter the secondary menu by pressing the
up arrow four times while EXIT is highlighted.
MAIN
OUTP
INP
P CODE
INP
P CODE
View or change the filter (set F), jitter (set J), enable reed
mode. Use the filter setting if the display is jumping
excessively due to flow conditions. Use the jitter setting to
enter a time delay to handle start up conditions. Jitter units
are seconds.
OUTP
INP
OUTP
EXIT
EXIT
OUTP
MAIN
PRESS TO SET F, J, REED
AND PULSE INDICATOR
SCROLL TO SELECT A
SUBMENU AND CHANGE
FEATURES
MAIN
INP
P CODE
PCODE
PRESS TO SET ALARMS,
PULSE OUT, AND 4-20 mA
MAIN
OUTP
INP
P CODE
PRESS TO SET PASSCODE
AND CHANGE PROTECTED
FEATURES
EXIT
View or change the function of Set P tab on the main menu.
The P/A tab changes the function of the outputs. Default
is scaled pulse out for both outputs. Either output can be
changed to alarm high or alarm low. If alarm options are
selected menu tabs for setting the alarms will be displayed
on the main menu (alarm 1) or the secondary menu (alarm
2) If the alarm options are selected a Set H (hysteresis) tab
is available. The hysteresis entry is a % value. The value
defines the % change required for a change in alarm state
to occur.
The factory setting will show Set P2 which allows one to
view or change the volume of flow totalized per pulse
sent to pulse out 2. The units for Set P2 follow the units
selected for the rate display. If P2 is selected as an alarm
the menus will change to Set A2 and a Set H (hysteresis)
tab is available. The hysteresis entry is a % value. The value
defines the % change required for a change in alarm state
to occur.
EXIT
Enter the pass code for access to protected features.
Protected Features
To enter the protected features use the left/right arrow
keys to navigate to the Pcode tab, found in the secondary
menu. Press the enter key and then enter the pass code.
The protected menu, shown below, will now be displayed.
The tabs have the following functions:
Set CD Enter a user created numerical pass code.
Lock
Lock menu functions to prevent unauthorized
changes.
E/D R
Disable or enable the total volume reset
function.
PCNT
Keeps a running tally of the number of times
the pass code has been used.
Set 4 input the flow rate at which 4 mA (min) output is
desired.
ADJ L allows the adjustment of the 4 mA and 20 mA values
so that one can tune performance of the DPF144 to match
the installed system values. The adjustment units range
from 0-32. Positive values adjust the setting incrementally
larger and negative values adjust the setting incrementally
lower.
Page 13
omega.com
TROUBLESHOOTING
DPF143/144 SERIES INSTRUCTIONS
Problem
Probable Causes
Things to try…
Display blank
No power to the unit
Check for minimum 12 Vdc at power terminals
Short in sensor circuit
Disconnect sensor, see if display returns (zero flow
rate)
Display is in sleep mode
Push any button to reactivate display. (Display goes
to sleep after about 3 minutes of non-use.)
Display missing pixels
Damaged display module
Contact Omega for return/replacement
Display showing meaningless
characters
Unit's microcontroller crashed
Disconnect and reconnect power. If problem
repeats, contact distributor for return/replacement.
Display reads normally but flow
rate incorrect
Wrong K-factor or time base
entered
Enter correct K-factor from meter, fitting, or manual
Display reads normally but
incorrect pulse output
Wrong pulse output setting
Use "Set P" to correct pulse output setting
Polarity reversed on pulse output
terminals
Reverse leads
Display reads normally, but no
(or incorrect) 4-20mA output
(DPF144 only)
Wrong 4mA setting or wrong 20mA
setting
Use "Set 4" to correct target minimum flow rate.
Use "Set 20" to correct target top flow rate.
Inadequate loop power supply
voltage
Check voltage (For 4-20mA applications, 24 Vdc is
recommended)
Polarity incorrect in 4-20mA loop
circuit
Compare to Connections diagram
Display reads zero when there
is flow
Flow sensor failed
Consult flow sensor manual for how to test
Break in flow sensor circuit
Check for continuity with multimeter
Display reads flow rate when
there is none
Long flow sensor wire, running
parallel to power wires
Reroute wire or change to shielded wire
Flow sensor malfunction
See flow sensor manual to check
Flow "jitter" (oscillating slosh) reads
as flow
Consult factory for "anti-jitter" setting
Break in power to meter
The totalizer's memory is only updated every 15
minutes. If power is lost, the totalizer will retain the
value last written but will not be updated to reflect
any flow between the last write and the time the
power was lost.
Totalizer does not always
appear to display the total flow
Page 14
omega.com
WARRANTY/DISCLAIMER
OMEGA ENGINEERING, INC. warrants this unit to be free of defects in materials and workmanship for a
period of 13 months from date of purchase. OMEGA’s WARRANTY adds an additional one (1) month
grace period to the normal one (1) year product warranty to cover handling and shipping time. This
ensures that OMEGA’s customers receive maximum coverage on each product.
If the unit malfunctions, it must be returned to the factory for evaluation. OMEGA’s Customer Service
Department will issue an Authorized Return (AR) number immediately upon phone or written request.
Upon examination by OMEGA, if the unit is found to be defective, it will be repaired or replaced at no
charge. OMEGA’s WARRANTY does not apply to defects resulting from any action of the purchaser,
including but not limited to mishandling, improper interfacing, operation outside of design limits,
improper repair, or unauthorized modification. This WARRANTY is VOID if the unit shows evidence of
having been tampered with or shows evidence of having been damaged as a result of excessive corrosion;
or current, heat, moisture or vibration; improper specification; misapplication; misuse or other operating
conditions outside of OMEGA’s control. Components in which wear is not warranted, include but are not
limited to contact points, fuses, and triacs.
OMEGA is pleased to offer suggestions on the use of its various products. However,
OMEGA neither assumes responsibility for any omissions or errors nor assumes liability for
any damages that result from the use of its products in accordance with information provided
by OMEGA, either verbal or written. OMEGA warrants only that the parts manufactured by the
company will be as specified and free of defects. OMEGA MAKES NO OTHER WARRANTIES OR
REPRESENTATIONS OF ANY KIND WHATSOEVER, EXPRESSED OR IMPLIED, EXCEPT THAT OF
TITLE, AND ALL IMPLIED WARRANTIES INCLUDING ANY WARRANTY OF MERCHANTABILITY
AND FITNESS FOR A PARTICULAR PURPOSE ARE HEREBY DISCLAIMED. LIMITATION OF
LIABILITY: The remedies of purchaser set forth herein are exclusive, and the total liability of
OMEGA with respect to this order, whether based on contract, warranty, negligence,
indemnification, strict liability or otherwise, shall not exceed the purchase price of the
component upon which liability is based. In no event shall OMEGA be liable for
consequential, incidental or special damages.
CONDITIONS: Equipment sold by OMEGA is not intended to be used, nor shall it be used: (1) as a “Basic
Component” under 10 CFR 21 (NRC), used in or with any nuclear installation or activity; or (2) in medical
applications or used on humans. Should any Product(s) be used in or with any nuclear installation or
activity, medical application, used on humans, or misused in any way, OMEGA assumes no responsibility
as set forth in our basic WARRANTY/DISCLAIMER language, and, additionally, purchaser will indemnify
OMEGA and hold OMEGA harmless from any liability or damage whatsoever arising out of the use of the
Product(s) in such a manner.
RETURN REQUESTS/INQUIRIES
Direct all warranty and repair requests/inquiries to the OMEGA Customer Service Department.
BEFORE RETURNING ANY PRODUCT(S) TO OMEGA, PURCHASER MUST OBTAIN AN AUTHORIZED
RETURN (AR) NUMBER FROM OMEGA’S CUSTOMER SERVICE DEPARTMENT (IN ORDER TO AVOID
PROCESSING DELAYS). The assigned AR number should then be marked on the outside of the return
package and on any correspondence.
The purchaser is responsible for shipping charges, freight, insurance and proper packaging to prevent
breakage in transit.
FOR NON-WARRANTY REPAIRS, consult
FOR WARRANTY RETURNS, please have the
OMEGA for current repair charges. Have
following information available BEFORE contacting
the following information available BEFORE
OMEGA:
contacting OMEGA:
1.Purchase Order number under which the product
1. Purchase Order number to cover the COST
was PURCHASED,
of the repair,
2.Model and serial number of the product under
2. Model and serial number of the product, and
warranty, and
3. Repair instructions and/or specific problems
3. Repair instructions and/or specific problems
relative to the product.
relative to the product.
OMEGA’s policy is to make running changes, not model changes, whenever an improvement is possible. This affords
our customers the latest in technology and engineering.
OMEGA is a registered trademark of OMEGA ENGINEERING, INC.
© Copyright 2016 OMEGA ENGINEERING, INC. All rights reserved. This document may not be copied, photocopied,
reproduced, translated, or reduced to any electronic medium or machine-readable form, in whole or in part, without the
prior written consent of OMEGA ENGINEERING, INC.
Where Do I Find Everything I Need for
Process Measurement and Control?
OMEGA…Of Course!
Shop online at omega.com SM
TEMPERATURE
M
U Thermocouple, RTD & Thermistor Probes, Connectors, Panels & Assemblies
M
U Wire: Thermocouple, RTD & Thermistor
M
U Calibrators & Ice Point References
M
U Recorders, Controllers & Process Monitors
M
U Infrared Pyrometers
PRESSURE, STRAIN AND FORCE
M
U Transducers & Strain Gages
M
U Load Cells & Pressure Gages
M
U Displacement Transducers
M
U Instrumentation & Accessories
FLOW/LEVEL
M
U Rotameters, Gas Mass Flowmeters & Flow Computers
M
U Air Velocity Indicators
M
U Turbine/Paddlewheel Systems
M
U Totalizers & Batch Controllers
pH/CONDUCTIVITY
M
U pH Electrodes, Testers & Accessories
M
U Benchtop/Laboratory Meters
M
U Controllers, Calibrators, Simulators & Pumps
M
U Industrial pH & Conductivity Equipment
DATA ACQUISITION
M
U Communications-Based Acquisition Systems
M
U Data Logging Systems
M
U Wireless Sensors, Transmitters, & Receivers
M
U Signal Conditioners
M
U Data Acquisition Software
HEATERS
M
U Heating Cable
M
U Cartridge & Strip Heaters
M
U Immersion & Band Heaters
M
U Flexible Heaters
M
U Laboratory Heaters
ENVIRONMENTAL
MONITORING AND CONTROL
M
U Metering & Control Instrumentation
M
U Refractometers
M
U Pumps & Tubing
M
U Air, Soil & Water Monitors
M
U Industrial Water & Wastewater Treatment
M
U pH, Conductivity & Dissolved Oxygen Instruments
LT-14388r1.1 20161017
10/17/16
M-5615/1016
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising