Omega | EWS-TX Series | Owner Manual | Omega EWS-TX Series Owner Manual

Omega EWS-TX Series Owner Manual
EWS Series
Economical Wall Mount Sensors
INSTRUCTION
SHEET
STANDARD CONDUIT BOX IS
SHOWN FOR REFERENCE ONLY
AND MUST BE PURCHASED
FROM YOUR LOCAL ELECTRICAL
SUPPLY HOUSE
EWS-TX
M3500/0514
Shop online at: omega.com e-mail: info@omega.com
For latest product manuals: omegamanual.info
WALL PLATE AND MOUNTING BRACKET IS
NOT INCLUDED. ORDER ACCESSORY NO. EWS-MB
70.64
(2.78)
(2) MTG.
HOLES
FOR
#6–32
SCREWS
63.50
31.75 (2.50)
(1.25)
0.79
(0.031)
WALL
THICKNESS
Ø 3/16
THRU.
2 PLACES
53.97
(2.125)
Ø 35.71
(1.406)
30.22
(1.19)
115.09
(4.531)
60.45
(2.38)
85.85
(3.28)
60.12
(2.37)
107.95
(4.25)
Ø 12.7
(0.5)
Specifications
Temperature Range: -18 to 57°C
(0 to 135°F)
Accuracy: (Still Air) ±0.7°C (±1.2°F)
@ 25°C ±1.4°C (2.5°F) across full range
(Slow Moving Air) ±1.4°C (2.5°F) @ 25°C
±1.7°C (3.0°F) across full range
Note: Not recommended for fast moving
air applications.
Repeatability: ±0.3°C (0.5°F)
Output: 4-20 mA (1-5 Vdc) (User Selectable)
Temp. Time Constant: (for 63.2% response)
9 sec. in moving air (1 M/sec.), 30 sec. in still air
Power: 12-24 Vdc @ 20 mA
Max. Loop Resistance:
(V supply -8 V)/.020 A = Ohms
Enclosure Material: Acrylonitrile Butadlene
Dimensions: 79 x 54 x 45 mm
(3.12 L x 2.12 W x 1.78" H)
TEMPERATURE VS OUTPUT
Deg.C Deg. F 4-20 mA
1-5 vdc
-18
0
4.0
1.00
-10
14
5.7
1.43
0
32
7.8
1.95
10
50
9.9
2.48
20
68
12.1
3.00
30
86
14.2
3.55
40
104
16.3
4.08
50
122
18.5
4.63
57
135
20.0
5.00
3.96
(0.156)
WALL PLATE
(SS, BRUSH FINISH)
EWS–MB
DIMENSIONS mm (in)
6-32 UNC THRU
2 PLACES
CONDUIT BOX MOUNTING PLATE
(0.06" THICK ALUMINUM)
EWS–MB
4-20 MA OUTPUT WIRING
EWS-TX
TEMPERATURE TRANSMITTER
12-24 VOLTS
DC POWER
SUPPLY
1
2 3 TB2
MILIAMP INPUT
PROCESS METER
73
MODEL: DPi32
MODEL: PSU-93
1-5 VDC OUTPUT WIRING
EWS-TX
TEMPERATURE TRANSMITTER
12-24 VOLTS
DC POWER
SUPPLY
1
2 3 TB2
VOLTAGE INPUT
PROCESS METER
73
MODEL: PSU-93
MODEL: DPi32
Accessories
Model No.
Description
EWS-MBConduit box mounting bracket/wall plate adaptor kit
PSU-9324 Vdc power supply (for transmitter models)
TX4-100
Shielded 4 conductor transmitter cable (100 ft)
1.58
(0.062)
omega.com info@omega.com
U.S.A.:
Servicing North America:
Omega Engineering, Inc., One Omega Drive, P.O. Box 4047
Stamford, CT 06907-0047 USA
Toll-Free: 1-800-826-6342 (USA & Canada only)
Customer Service: 1-800-622-2378 (USA & Canada only)
Engineering Service: 1-800-872-9436 (USA & Canada only)
Tel: (203) 359-1660 Fax: (203) 359-7700
e-mail: info@omega.com
For Other Locations Visit omega.com/worldwide
The information contained in this document is believed to be correct, but OMEGA accepts no liability for any errors it contains, and reserves the
right to alter specifications without notice.
WARNING: These products are not designed for use in, and should not be used for, human applications.
WARRANTY/DISCLAIMER
OMEGA ENGINEERING, INC. warrants this unit to be free of defects in materials and workmanship for a period of 13 months
from date of purchase. OMEGA’s WARRANTY adds an additional one (1) month grace period to the normal one (1) year product
warranty to cover handling and shipping time. This ensures that OMEGA’s customers receive maximum coverage on each product.
If the unit malfunctions, it must be returned to the factory for evaluation. OMEGA’s Customer Service Department will issue an
Authorized Return (AR) number immediately upon phone or written request. Upon examination by OMEGA, if the unit is found
to be defective, it will be repaired or replaced at no charge. OMEGA’s WARRANTY does not apply to defects resulting from
any action of the purchaser, including but not limited to mishandling, improper interfacing, operation outside of design limits,
improper repair, or unauthorized modification. This WARRANTY is VOID if the unit shows evidence of having been tampered with
or shows evidence of having been damaged as a result of excessive corrosion; or current, heat, moisture or vibration; improper
specification; misapplication; misuse or other operating conditions outside of OMEGA’s control. Components in which wear is not
warranted, include but are not limited to contact points, fuses, and triacs.
OMEGA is pleased to offer suggestions on the use of its various products. However, OMEGA neither assumes
responsibility for any omissions or errors nor assumes liability for any damages that result from the use of its
products in accordance with information provided by OMEGA, either verbal or written. OMEGA warrants only
that the parts manufactured by the company will be as specified and free of defects. OMEGA MAKES NO OTHER
WARRANTIES OR REPRESENTATIONS OF ANY KIND WHATSOEVER, EXPRESSED OR IMPLIED, EXCEPT THAT OF
TITLE, AND ALL IMPLIED WARRANTIES INCLUDING ANY WARRANTY OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE ARE HEREBY DISCLAIMED. LIMITATION OF LIABILITY: The remedies of purchaser set forth
herein are exclusive, and the total liability of OMEGA with respect to this order, whether based on contract, warranty,
negligence, indemnification, strict liability or otherwise, shall not exceed the purchase price of the component upon
which liability is based. In no event shall OMEGA be liable for consequential, incidental or special damages.
CONDITIONS: Equipment sold by OMEGA is not intended to be used, nor shall it be used: (1) as a “Basic Component” under 10
CFR 21 (NRC), used in or with any nuclear installation or activity; or (2) in medical applications or used on humans. Should any
Product(s) be used in or with any nuclear installation or activity, medical application, used on humans, or misused in any way,
OMEGA assumes no responsibility as set forth in our basic WARRANTY / DISCLAIMER language, and, additionally, purchaser will
indemnify OMEGA and hold OMEGA harmless from any liability or damage whatsoever arising out of the use of the Product(s) in
such a manner.
RETURN REQUESTS / INQUIRIES
Direct all warranty and repair requests/inquiries to the OMEGA Customer Service Department. BEFORE RETURNING ANY
PRODUCT(S) TO OMEGA, PURCHASER MUST OBTAIN AN AUTHORIZED RETURN (AR) NUMBER FROM OMEGA’S CUSTOMER
SERVICE DEPARTMENT (IN ORDER TO AVOID PROCESSING DELAYS). The assigned AR number should then be marked on the
outside of the return package and on any correspondence.
The purchaser is responsible for shipping charges, freight, insurance and proper packaging to prevent breakage in transit.
FOR WARRANTY RETURNS, please have the following
information available BEFORE contacting OMEGA:
1.Purchase Order number under which the product was
PURCHASED,
2.Model and serial number of the product under warranty, and
3.Repair instructions and/or specific problems relative to the
product.
FOR NON-WARRANTY REPAIRS, consult OMEGA for current
repair charges. Have the following information available BEFORE
contacting OMEGA:
1. Purchase Order number to cover the COST of the repair,
2. Model and serial number of the product, and
3.Repair instructions and/or specific problems relative to the
product.
OMEGA’s policy is to make running changes, not model changes, whenever an improvement is possible. This affords our customers the latest in technology and
engineering. OMEGA is a registered trademark of OMEGA ENGINEERING, INC.
© Copyright 2014 OMEGA ENGINEERING, INC. All rights reserved. This document may not be copied, photocopied, reproduced, translated, or reduced to any electronic
medium or machine-readable form, in whole or in part, without the prior written consent of OMEGA ENGINEERING, INC.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising