Omega | FL46300 Series | Owner Manual | Omega FL46300 Series Owner Manual

Omega FL46300 Series Owner Manual
R
FL46300 Series
IN-LINE FLOW METERS
INSTRUCTION
SHEET
M3584/0119119
The FL46300 Series of in-line flow meters
offers individual, handmade quality,
combined with excellent accuracy
and repeatability.
Dimensions: FL46301-06:208 H x 32
Mm D (8-3/16 x 1-1/4”); FL46307-09: 279 H x
32mm D (11 x 1-1/4”)
Weight: 680 g (1.5 lb)
INSTALLATION
Always use Teflon® tape or similar
material on pipe threads when
making connections. Never use oil
base pipe dopes or solvents.
Remember you are installing an
Instrument and fittings should be tightened
only enough to prevent leaking. Over
tightening may result in
SPECIFICATIONS
damage to the meter.
Accuracy: ±5%
Never hold the meter with pliers or
Meter Construction: Acrylic body
like tools during installation.
O-ring Material: FKMKM
Install the meter in an exactly vertical
Float: 316SS (PVC for FL46301
plane to obtain the best possible
and FL46302). The lower GPM scale
reading.
ranges (.025-.250 and .1-1.0 ) are not
Whatever the installation
available with SS floats.
circumstances, meter should never
Temperature Limit: 65°C (150°F) at 0 psig
be allowed to support the weight of
Pressure Limit: 150 psig at 21°C (70°F)
The related pipe or tubing.
Pressure Drop: 2.0 psi max.
These flow meters are machined of
high Quality acrylic rod stock, carefully
Polished to a clear-as-glass finish.
Easy To read scales are screen printed
on the Meter body. Adapters are glass
filled Polypropylene, and O-ring seals
are FKM.
MAINTENANCE
The “Exploded View” drawings illustrate
assembly of the Fl46300 series meters.
If your flow meter needs to be cleaned,
refer to these drawing when
reassembling the unit. The tapered tube
may be cleaned with a soft bottle brush.
Use a MILD soap and water solution for
cleaning purpose.
3/4" and 1" FPT
1/4", 3/8" and 1/2" FPT
1/4" FPT
Adapter
When installing the Fl46300 series
meters, be certain of proper pipe
alignment, misalignment will put
excessive stress on the meter.
3/8" and 1/2"
FPT Adapter
1
1
2
2
3
3
6
6
4
4
Parts
1. Adapters (2)
2. “O” Ring Seal (2)
3. Wire Holder (2)*
4. Float (1)*
5. Guide Wire (1)
6. Meter Body (1)*
*Parts not available
need to buy a new unit.
5
5
3
2
3
2
1
3/8" and 1/2”
FPT Adapter
1/4" FPT
Adapter
1
Teflon® is a registered
Trademark of DuPont.
omega.com info@omega.com
U.S.A.
Headquarters:
Servicing North America:
Omega Engineering, Inc.
800 Connecticut Ave. Suite 5N01, Norwalk, CT. 06854
Toll-Free: 1-800-826-6342 (USA & Canada only)
Customer Service: 1-800-622-2378 (USA & Canada only)
Engineering Service: 1-800-872-9436 (USA & Canada only)
Tel: (203) 359-1660
Fax: (203) 359-7700
e-mail: info@omega.com
For Other Locations Visit omega.com/worldwide
The information contained in this document is believed to be correct, but OMEGA accepts no liability for any errors it contains, and reserves
the right to alter specifications without notice.
WARRANTY/DISCLAIMER
OMEGA ENGINEERING, INC. warrants this unit to be free of defects in materials and workmanship for a period of 13 months
from date of purchase. OMEGA’s WARRANTY adds an additional one (1) month grace period to the normal one (1) year
product warranty to cover handling and shipping time. This ensures that OMEGA’s customers receive maximum coverage on
each product.
If the unit malfunctions, it must be returned to the factory for evaluation. OMEGA’s Customer Service Department will issue an
Authorized Return (AR) number immediately upon phone or written request. Upon examination by OMEGA, if the unit is found
to be defective, it will be repaired or replaced at no charge. OMEGA’s WARRANTY does not apply to defects resulting from
any action of the purchaser, including but not limited to mishandling, improper interfacing, operation outside of design limits,
improper repair, or unauthorized modification. This WARRANTY is VOID if the unit shows evidence of having been tampered
with or shows evidence of having been damaged as a result of excessive corrosion; or current, heat, moisture or vibration;
improper specification; misapplication; misuse or other operating conditions outside of OMEGA’s control. Components in
which wear is not warranted, include but are not limited to contact points, fuses, and triacs.
OMEGA is pleased to offer suggestions on the use of its various products. However, OMEGA neither assumes
responsibility for any omissions or errors nor assumes liability for any damages that result from the use of its
products in accordance with information provided by OMEGA, either verbal or written. OMEGA warrants only
that the parts manufactured by the company will be as specified and free of defects. OMEGA MAKES NO OTHER
WARRANTIES OR REPRESENTATIONS OF ANY KIND WHATSOEVER, EXPRESSED OR IMPLIED, EXCEPT THAT OF
TITLE, AND ALL IMPLIED WARRANTIES INCLUDING ANY WARRANTY OF MERCHANTABILITY AND FITNESS FOR
A PARTICULAR PURPOSE ARE HEREBY DISCLAIMED. LIMITATION OF LIABILITY: The remedies of purchaser set
forth herein are exclusive, and the total liability of OMEGA with respect to this order, whether based on contract,
warranty, negligence, indemnification, strict liability or otherwise, shall not exceed the purchase price of the
component upon which liability is based. In no event shall OMEGA be liable for consequential, incidental or
special damages.
CONDITIONS: Equipment sold by OMEGA is not intended to be used, nor shall it be used: (1) as a “Basic Component” under
10 CFR 21 (NRC), used in or with any nuclear installation or activity; or (2) in medical applications or used on humans. Should
any Product(s) be used in or with any nuclear installation or activity, medical application, used on humans, or misused in
any way, OMEGA assumes no responsibility as set forth in our basic WARRANTY / DISCLAIMER language, and, additionally,
purchaser will indemnify OMEGA and hold OMEGA harmless from any liability or damage whatsoever arising out of the use of
the Product(s) in such a manner.
RETURN REQUESTS / INQUIRIES
Direct all warranty and repair requests/inquiries to the OMEGA Customer Service Department. BEFORE RETURNING
ANY PRODUCT(S) TO OMEGA, PURCHASER MUST OBTAIN AN AUTHORIZED RETURN (AR) NUMBER FROM OMEGA’S
CUSTOMER SERVICE DEPARTMENT (IN ORDER TO AVOID PROCESSING DELAYS). The assigned AR number should then be
marked on the outside of the return package and on any correspondence.
The purchaser is responsible for shipping charges, freight, insurance and proper packaging to prevent breakage in transit.
FOR WARRANTY RETURNS, please have the following
information available BEFORE contacting OMEGA:
1.Purchase Order number under which the product was
PURCHASED,
2.Model and serial number of the product under warranty, and
3.Repair instructions and/or specific problems relative to the
product.
FOR NON-WARRANTY REPAIRS, consult OMEGA for current
repair charges. Have the following information available
BEFORE contacting OMEGA:
1. Purchase Order number to cover the COST of the repair,
2. Model and serial number of the product, and
3.Repair instructions and/or specific problems relative to
the product.
OMEGA’s policy is to make running changes, not model changes, whenever an improvement is possible. This affords our customers the latest in technology and
engineering. OMEGA is a trademark of OMEGA ENGINEERING, INC.
© Copyright 2019 OMEGA ENGINEERING, INC. All rights reserved. This document may not be copied, photocopied, reproduced, translated, or reduced to any
electronic medium or machine-readable form, in whole or in part, without the prior written consent of OMEGA ENGINEERING, INC.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising