7/12/02
M0139RoundHolePunchesDwg.eps
ROUND HOLE
PUNCHES
DIE
PUNCH
DRILL PILOT HOLE
(SEE TABLE BELOW)
DRIVE SCREW
PANEL TO BE PUNCHED
DO NOT OPERATE DRY . . . LUBRICATE PUNCH AND THREADS
GOOD UP TO MAXIMUM OF 3.18 (1/8) ALUMINUM OR 1.59 (1/16) MILD STEEL
RHP-58
RHP-78
PILOT HOLE REQ'D.
7.19 (9/32)
10.32 (13/32)
PUNCH SIZE
15.88 (5/8)
22.23 (7/8)
Dimensions in mm (in.)
7/12/02
M0139RoundHolePunchesBack.eps
®
ENGINEERING, INC.
One Omega Drive
P.O. Box 4047
Stamford CT 06907-0047 USA
TEL: (203) 359-1660
FAX: (203) 359-7700
www.omega.com
e-mail: [email protected]
© Copyright 2002 OMEGA ENGINEERING, INC. Printed in U.S.A.
M0139/1001
">
