Gigaset | E630A GO | User guide | Gigaset E630A GO User guide

Gigaset E630A GO User guide
Gigaset E630A GO / LUG_GO AU en / A31008-M2725-C401-1-7619 / Cover_front_c.fm / 11/8/17
E630 A GO
You can find the most up-to-date
user guide at
www.gigaset.com/manuals
User guide online on your
smartphone or tablet:
Download the Gigaset Help app
Gigaset E630A GO / AU / A31008-M2725-C401-1-7619 / Cover_front_c.fm / 11/8/17
Gigaset E630A GO / LUG_GO AU en / A31008-M2725-C401-1-7619 / GO_intro.fm / 11/8/17
Gigaset GO: For the fixed line network with a future
Make telephony at home flexible with this Gigaset GO phone. There are three connection
alternatives, as well as all the GO functions.
Making calls using the analogue fixed line network
Connect the phone to your analogue fixed line connection (PSTN). Plug the phone cable into the
fixed line connection. You can then
• Use the analogue line to make phone calls
• Use the integrated answer machine
• Use the other functions of your Gigaset phone (directory, call lists etc.)
Making calls over the Internet
Connect the phone to a router. In this case, ignore the phone cable and plug the network cable
into a LAN connection on your router. Register the phone with your internet telephony provider
(IP). With this connection, you can
• Make two calls at the same time
• Assign a separate number to each handset
• Make calls using different telephony providers
• Set up three answer machines with individual recording and advisory texts
• Use the other functions of your Gigaset phone (directory, call lists etc.).
Making calls using the analogue fixed line network and over the Internet
If you have both an analogue fixed line connection and an Internet connection, you can use the
functions of both connections, e. g. make a fixed line call and two Internet calls at the same time.
Template Go, Version 1, 01.07.2014 / ModuleVersion 1.0
New functions of the Gigaset GO phones
In addition to the functions of previous analogue or IP phones, Gigaset GO phones also offer
further new options:
• Make calls between Gigaset GO phones across the world free of charge via Gigaset.net
• Display online services information, e. g. weather tickers or eBay messages
• Use online directories (not available in all countries)
• Use cloud services and smartphone apps for connecting between fixed line network
phones and smartphones: e. g. receive notifications on your smartphone if there is an
incoming call or a voice message on the GO phone at home or transfer smartphone
contacts to the GO phone
The range of functions is constantly updated.
Further information about Gigaset GO can be found at
www.gigaset.com/go
1
Gigaset E630A GO / LUG_GO AU en / A31008-M2725-C401-1-7619 / LUG_GOIVZ.fm / 11/8/17
Contents
Contents
Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Handset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Base station . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Illustration in the user guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Safety precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5
5
5
6
7
Template Go, Version 1, 01.07.2014 / ModuleVersion 1.0
Getting started . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Contents of the package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Handset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Changing the display language . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Base station . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Setting up an IP account . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Using the telephone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Getting to know your telephone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Making calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Making calls via the Internet (VoIP) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Provider-specific functions (network services) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Message lists . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Call lists . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Local handset directory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Online directories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Gigaset.net directory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
17
17
20
25
28
32
34
35
39
41
Answer machine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Local answer machine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Network mailbox . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Set fast access for the answer machine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
43
43
48
49
Additional functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Sound profiles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Spot LED . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Calendar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Alarm clock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Baby monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
ECO DECT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Protection against unwanted calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
SMS (text messages) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
E-Mail notifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Info Centre . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
50
50
51
51
53
54
55
56
58
65
68
Expanding the functionality of the telephone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Multiple handsets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Repeater . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Operation with a PABX . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
73
73
75
76
2
Gigaset E630A GO / LUG_GO AU en / A31008-M2725-C401-1-7619 / LUG_GOIVZ.fm / 11/8/17
Contents
Adjusting the telephone settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Handset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Internet telephony (VoIP) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Web configurator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
78
78
86
90
93
Appendix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 109
Customer service & product warranty – Australia and New Zealand . . . . . . . . . . . . . . . . . . . . 109
Manufacturer's advice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 114
Technical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 116
Display icons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 118
Menu overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 120
Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 123
Open Source Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 129
Template Go, Version 1, 01.07.2014 / ModuleVersion 1.0
Not all functions described in the user guide are available in all countries or from all
network providers.
3
Gigaset E630A GO / LUG_GO AU en / A31008-M2725-C401-1-7619 / overview_1 _GO.fm / 11/8/17
1
2
3
A
INT 1
4
Calls
Calendar
5
Template Go, Version 1, 01.07.2014 / ModuleVersion 1.0
16
15
6
14
13
7
8
12
9
11
10
4
Gigaset E630A GO / LUG_GO AU en / A31008-M2725-C401-1-7619 / overview_2_GO.fm / 11/8/17
Overview
Overview
Handset
Template Go, Version 1, 01.07.2014 / ModuleVersion 1.0
1
Spot LED (
p. 51) /
Visual call signal ( p. 83)
2 Display
3 Status bar (
p. 118)
Icons display current settings and operating
status of the phone
5 Display keys ( p. 18)
Various functions, depending on the operating
situation
6 End call key, On/off key
End call; cancel function;
Go back one menu level
Press briefly
Return to idle status
Press and
hold
Switch the handset on/off
Press and
(in idle status)
hold
7 Message key (
p. 32)
Access to the calls and message lists;
Flashes: new message or new call
8 Profile key
Switch between sound profiles
9 Hash key
Lock/unlock the keypad
Press and
(in idle status)
hold
Toggle between upper/lower
Press briefly
case and digits
(when inputting text)
10 Headset connection
(2.5 mm jack)
11 Microphone
12 Star key
Open special characters table
Press briefly
(when inputting text)
13 Key 1
Select answer machine/
network mailbox
14 Recall key
Consultation call (flash)
Insert a dialling pause
Press and
hold
Press briefly
Press and
hold
15 Talk key / Handsfree key
Accept call; select displayed number; send SMS
(when composing an SMS)
Switch between earpiece and speaker mode
Open the redial list
Press briefly
Start dialling
Press and
hold
16 Control key / Menu key ( p. 17)
Open a menu; navigate in menus and entry
fields; access functions (depending on the situation)
Base station
A
Registration/paging key
Locate a handset (paging);
Show IP address on handset
Register handset
Press briefly
Press and
hold
Illuminated: LAN connection active (phone is
connected to router)
Flashes:
Base station in registration mode
5
Gigaset E630A GO / LUG_GO AU en / A31008-M2725-C401-1-7619 / user_guide_operating_steps.fm / 11/8/17
Illustration in the user guide
Illustration in the user guide
Warnings, which, if not heeded, can result in injury to persons or damage to devices.
Important information regarding function and appropriate handling or functions
that could generate costs.
Prerequisite for being able to carry out the following action.
Additional helpful information.
Keys
or
/
Talk key
or
Handsfree key
End call key
to
Number / letter keys
Control key rim / centre
Message key
Recall key
Star key
Hash key
Profile key
OK, Back, Select, Change, Save, . . .
Display keys
Procedures
Example: Switching Auto answer on/off
¤
. . . use
Template Go, Version 1, 01.07.2014 / ModuleVersion 1.0
Change (
Step
¤
6
Settings
OK
Telephony
OK
Auto Answer
Follow this procedure
¤
¤
¤
¤
¤
¤
to select
= on)
When in idle status press the centre of the control key.
The main menu opens.
Navigate to the
OK
icon using the control key
.
Select OK to confirm. The submenu Settings opens.
Telephony
Select the Telephony entry using the control key
.
OK
Select OK to confirm. The submenu Telephony opens.
Auto Answer
The function to switch Auto answer on/off appears as the first menu
item.
Change
Select Change to activate or deactivate.
Function is activated
/deactivated
.
Gigaset E630A GO / LUG_GO AU en / A31008-M2725-C401-1-7619 / security.fm / 11/8/17
Safety precautions
Safety precautions
Read the safety precautions and the user guide before use.
The device cannot be used in the event of a power failure. It is also not possible to
transmit emergency calls.
Emergency numbers cannot be dialled if the keypad/display lock is activated!
Use only rechargeable batteries that correspond to the specification (see list of permitted batteries www.gigaset.com/service). Never use a conventional (non-rechargeable) battery or other battery types as this could result in significant health risks and personal injury. Rechargeable batteries, which are noticeably damaged, must be replaced.
The handset must not be operated if the battery cover is open.
Do not use the devices in environments with a potential explosion hazard
(e.g., paint shops).
The base and charger are not splashproof. For this reason do not install them in a damp
environment such as bathrooms or shower rooms.
Use only the power adapter indicated on the device.
Whilst charging, the power socket must be easily accessible.
Remove faulty devices from use or have them repaired by our Service team, as these
could interfere with other wireless services.
Do not use the device if the display is cracked or broken. Broken glass or plastic can cause
injury to hands and face. Send the device to our Service department to be repaired.
Template Go, Version 1, 01.07.2014 / ModuleVersion 1.0
Do not hold the rear of the handset to your ear when it is ringing or when speaker mode
is activated. Otherwise you risk serious and permanent damage to your hearing.
The phone may cause interference in analogue hearing aids (humming or whistling) or
cause them to overload. If you require assistance, please contact the hearing aid supplier.
Using your telephone may affect nearby medical equipment. Be aware of the technical
conditions in your particular environment, e.g., doctor's surgery.
If you use a medical device (e.g., a pacemaker), please contact the device manufacturer.
They will be able to advise you regarding the susceptibility of the device to external
sources of high frequency energy (for the specifications of your Gigaset product see
"Technical data").
7
Gigaset E630A GO / LUG_GO AU en / A31008-M2725-C401-1-7619 / starting_GO.fm / 11/8/17
Getting started
Getting started
Contents of the package
•
•
•
•
•
•
•
•
•
•
•
•
One base station,
One power adapter for the base station,
One phone cable,
One LAN cable,
One handset,
One charging cradle incl. power adapter,
One battery cover (rear cover for the handset),
One locking disc for the battery cover,
Two batteries,
One belt clip,
One rubber cover for the headset socket,
One user guide
Models with multiple handsets, per handset:
• One handset,
• One charging cradle incl. power adapter,
• Two batteries, one battery cover, one locking disc, one rubber cover and one belt clip
The base station and charging cradle are designed for use in closed, dry rooms within
a temperature range of +5 °C to +45 °C.
The device's feet do not usually leave any marks on surfaces. However, due to the multitude of different varnishes and polishes used on furniture, contact marks on the surfaces cannot be completely ruled out.
Template Go, Version 1, 01.07.2014 / ModuleVersion 1.0
Never expose the telephone to heat sources, direct sunlight or other electrical
devices.
Protect your telephone from moisture, dust, corrosive liquids and vapours.
8
Gigaset E630A GO / LUG_GO AU en / A31008-M2725-C401-1-7619 / starting_GO.fm / 11/8/17
Handset
Handset
Connecting the charging cradle
¤ Connect the flat plug of the power
¤
adapter 1 .
Plug the mains unit into your power
socket 2 .
2
4
To remove the plug from the charging cradle
again:
¤ Disconnect the power adapter from the
mains power supply.
¤ Press the release button 3 .
¤ Pull out the plug 4 .
1
3
Setting up the handset for use
The display is protected by a plastic film.
Please remove the protective film!
Inserting the batteries
Template Go, Version 1, 01.07.2014 / ModuleVersion 1.0
Only use rechargeable batteries, as this could otherwise result in significant health
risks and personal injury. For example, the outer casing of the batteries could be
destroyed or the batteries could explode. The device could also malfunction or be
damaged as a result of using batteries that are not of the recommended type.
¤
¤
¤
¤
Insert the batteries (for correct +/- direction,
see diagram 1 ).
Hold the battery cover at a slight angle and insert
the bottom into the casing first 2 .
Press the cover 3 until it clicks into place.
Insert the locking disc as shown (at an angle of
approx. 20°) 4 . Pay attention to the arrow
markings.
1
3
4
2
9
Gigaset E630A GO / LUG_GO AU en / A31008-M2725-C401-1-7619 / starting_GO.fm / 11/8/17
Handset
¤
Turn locking disc clockwise to the end stop 5 .
The locking disc is closed once the markings on
the disc are aligned with those on the cover 6 .
5
6
Re-opening the battery cover
¤
¤
Turn the locking disc anti-clockwise to the end
stop 7 (approx. 20°) and remove 8 .
Place your fingernail in the notch on the side
between the cover and the casing 9 . Remove
the cover 10 .
8
10
7
9
Charging the batteries
¤
Charge the batteries fully prior to first use in the
charging cradle.
The batteries are fully charged when the power icon
disappears from the display.
7.5 h
Batteries may heat up during charging. This is not dangerous.
After a time, the charge capacity of the battery will decrease for technical reasons.
Handsets contained in the package have already been registered to the base. In the
event that a handset is not registered however, (indicated by "Please register
handset"), register the handset manually ( p. 73).
Template Go, Version 1, 01.07.2014 / ModuleVersion 1.0
Attaching the belt clip
The handset has notches on each side for attaching
the belt clip.
• Attaching the belt clip: Press the belt clip onto
the back of the handset so that the tabs on the
belt clip click into place in the notches.
• Removing the belt clip: Press the centre of the
belt clip firmly with your right thumb. Push the
nail of your left thumb up between the clip and
the casing. Slide the clip upwards to remove.
10
Gigaset E630A GO / LUG_GO AU en / A31008-M2725-C401-1-7619 / starting_GO.fm / 11/8/17
Changing the display language
Changing the display language
You can change the display language, if the telephone has been set to an incomprehensible
language.
¤ Press the centre of the control key .
¤ Press the keys
and
slowly and successively . . . the
Deutsch
language settings display appears, the set language
English
(e. g. English) is highlighted (
= selected).
¤ To select a different language: Press the control key until Francais
the desired language is highlighted on the display,
e. g. Francais press the key on the right directly underneath the display to activate the
language.
¤ To revert to idle status: Press and hold the End call key
Base station
Connecting to the mains power supply
¤ Insert the power cable of the power
¤
¤
adapter into the upper connection socket
1 at the rear of the base station.
Push both cables into the appropriate cable
channels 2 .
Insert the power adapter into the power
socket 3 .
1
2
3
Template Go, Version 1, 01.07.2014 / ModuleVersion 1.0
Only use the supplied network cable.
The network cable must always be connected in order to function, as the phone will
not operate without a power supply.
Connecting to the analogue fixed line network
¤ Insert the phone cable into the lower
¤
¤
connection socket 1 at the rear of the base
station.
Push both cables into the appropriate cable
channels 2 .
Insert the phone cable into the fixed line
network connection 3 .
1
2
3
11
Gigaset E630A GO / LUG_GO AU en / A31008-M2725-C401-1-7619 / starting_GO.fm / 11/8/17
Base station
Only use the supplied phone cable. The pin connections of phone cables may vary.
You can now use your phone to make calls via the fixed line network and you can be reached
on your fixed line network number.
An answer machine in the base station is set with a pre-recorded announcement in answer
and record mode ( p. 43).
Connecting to the Internet
You will need to connect the phone to the Internet for Internet telephony (IP) and access to the
Internet and home network and Gigaset GO functions.
For connecting to the Internet: a router connected to the Internet.
For Internet telephony: a broadband Internet connection (e.g. DSL) with a flat rate.
Connecting the base to a router
¤
¤
Insert a jack from the Ethernet cable
supplied into the LAN connection
socket at the side of the base station
1 .
Insert the second jack of the Ethernet cable into an LAN connection
socket on the router 2 .
2
1
As soon as the cable between the telephone and the router is plugged in and the router is switched on, the key on the front of the base
station lights up (paging key).
Template Go, Version 1, 01.07.2014 / ModuleVersion 1.0
The phone is now connected to the Internet.
In order to be able to use all Gigaset GO functions, you may need to install apps on your
smartphone and apply settings in the phone's web configurator, e.g. registering your
phone with Gigaset elements.
Further information about the settings
web configurator
Further information about Gigaset GO can be found at
12
www.gigaset.com/go
Gigaset E630A GO / LUG_GO AU en / A31008-M2725-C401-1-7619 / starting_GO.fm / 11/8/17
Setting up an IP account
Data protection notice
When the device is connected to the router, it will automatically contact the Gigaset Support Server. It will
send the following device-specific information daily:
• Serial number/item number
• MAC address
• Private IP address for the Gigaset in the LAN/its port numbers
• Device name
• Software version
On the support server, this information is linked to the existing device-specific information:
• Gigaset.net phone number
• System-related/device-specific passwords
Further information about the data stored in relation to the Gigaset.net Service can be found at:
www.gigaset.net/privacy-policy
Setting up an IP account
So that you are able to make calls via the Internet (VoIP), you must have at least one IP account
with an Internet telephony provider. You can register using the access data that you receive from
your provider (user name, authentication name, password etc.).
To register the phone with your provider, please use:
• The VoIP wizard on the handset
• Or the web configurator on a PC or tablet ( p. 97)
You can configure up to six IP accounts.
Registering using the VoIP wizard on the handset
Template Go, Version 1, 01.07.2014 / ModuleVersion 1.0
As soon as the handset battery has sufficient charge, the
Message key on the handset will flash.
¤
Press the Message key
displayed text OK
Yes . . . the wizard starts
. . . scroll
through the
If the wizard does not start properly or you have terminated it: Start the VoIP wizard
using the handset menu
¤
. . . Use
to select
Settings OK
Telephony OK VoIP
Wizard
If "New firmware available" is shown on the display, there is a firmware update
available for your phone.
To update firmware: Yes . . . the new firmware is loaded (takes approx. 6 mins.)
The Message key
will then flash again.
¤ To start configuration: Press the Message key .
13
Gigaset E630A GO / LUG_GO AU en / A31008-M2725-C401-1-7619 / starting_GO.fm / 11/8/17
Setting up an IP account
The display shows the possible IP accounts (IP 1 to IP 6). Accounts
that are already configured are marked with
.
¤ . . . Use to select the required account OK
Select IP Account
IP 1
IP 2
IP 3
IP 4
IP 5
Back
OK
If no Internet connection can be established, a corresponding error message will be
generated. For more information, see "Questions and answers" Appendix
¤ Terminate the VoIP wizard: OK . . . The VoIP wizard will close Troubleshoot if
necessary Open the wizard again later via the menu to configure the IP account.
The wizard establishes a connection to the Gigaset configuration server on the Internet. Various
profiles with general configuration data for different providers can be downloaded here.
Select provider
A list of countries is loaded.
¤ . . . Use to select the country in which you want to use the
phone OK . . . a list of providers in this country is displayed
. . . use
to select provider OK . . . the general
configuration data for your provider is downloaded and stored
in the phone
Select a Provider
Provider 1
Provider 2
Provider 3
Provider 4
Provider 5
Back
OK
If your provider does not appear in the list:
Template Go, Version 1, 01.07.2014 / ModuleVersion 1.0
Terminate the wizard: Press and hold the End call key
. . . the handset returns to
idle status . . . set up the IP account using the web configurator
Entering user data for your IP account
You are required to enter your personal access data for your IP account, e. g. User ID, Password,
. . . (depending on the provider).
¤ Enter registration data confirm each entry using OK
Pay attention when entering access data, as it is case sensitive.
¤ To switch between lowercase, uppercase and number entry mode: Press the
key
¤ To delete incorrectly entered characters: Press the display key
¤ To navigate within an entry field: Press right/left on the control key
Message on successful transfer: Your IP account is registered at your provider.
The fixed line network connection is assigned to the handsets as a send connection. Please
change the send connection to make calls over the Internet.
14
Gigaset E630A GO / LUG_GO AU en / A31008-M2725-C401-1-7619 / starting_GO.fm / 11/8/17
Setting up an IP account
Send and receive connections
Assign the available phone connections (fixed line network, Gigaset.net and up to six IP
connections) to the end devices as receive and, where necessary, send connections. End devices
are the registered handsets and the three base answer machines.
• Receive connection: Phone numbers you may be called on. Incoming calls are forwarded to
the end devices for which the relevant connection is assigned as receive connection.
• Send connection: A line that you use for an outgoing call. The corresponding number will be
transferred to the recipient. You can assign each end device a number or the associated
connection as a send connection.
Each connection (number) of your phone can be both a send as well as a receive connection and
can be assigned to several end devices. It may only be assigned to one answer machine as a
receive connection.
Default assignment
• All configured connections are assigned to the handsets and answer machine 1 as receive
connections on delivery.
• The fixed line network connection is assigned to the handsets as a send connection. If you
have no fixed line network connection, no send connection is assigned.
Change send connections
¤
. . . Use
to select
Connections OK
Settings
OK
Telephony
Template Go, Version 1, 01.07.2014 / ModuleVersion 1.0
Select handset:
¤ . . . Use to select the handset on which you wish to change
the default assignment OK . . . the current connection for
outgoing calls assigned to the handset is displayed: Fixed Line
(if you have a fixed line network connection)
Change assignment:
¤ . . . use to select the desired connection or select Sel. at each
call Save
Sel. at each call: For each call, the line on which the call is
established can be selected.
You can now change the default assignment one after the other for
all registered handsets.
OK
Send
INT 1
Connection for
outgoing calls:
< IP 1
>
Back
Save
Change receive connection
¤
. . . Use
Connections
to select
Settings
OK
Telephony
OK
Rec.
OK
15
Gigaset E630A GO / LUG_GO AU en / A31008-M2725-C401-1-7619 / starting_GO.fm / 11/8/17
Setting up an IP account
Select handset or answer machine :
¤ . . . Use to select the handset or answer machine on which
you wish to change the default assignment OK . . . the display
shows an entry for each available phone connection (IP 1– IP 6,
Gigaset.net, Fixed Line)
Change assignment:
¤ . . . Use to select the desired connection . . . use to
select Yes or No (Yes = calls to this connection will be diverted to
the handset/answer machine ) Save
INT 1
Receive calls for
IP 1:
< Yes
>
Receive calls for
Gigaset.net:
Back
Save
Only one receive connection can be assigned per answer machine.
Template Go, Version 1, 01.07.2014 / ModuleVersion 1.0
One connection can only be assigned to one answer machine as a receive connection.
If you assign a receive connection to an answer machine and this connection is already
assigned to another answer machine, the "old" assignment is deleted.
16
Gigaset E630A GO / LUG_GO AU en / A31008-M2725-C401-1-7619 / operating.fm / 11/8/17
Getting to know your telephone
Using the telephone
Getting to know your telephone
Switching the handset on/off
¤ Press and hold the End call key
on the handset when switched off
Switch on:
¤ When the telephone is in idle status, press and hold the End call key
Switch off:
Locking/unlocking the keypad
The keypad lock prevents any accidental use of the telephone.
Lock/unlock the keypad:
Press and hold
Keypad lock activated: the symbol
appears in the display.
If a call is indicated on the handset, the keypad automatically unlocks and you can
accept the call. It then locks again when the call is finished.
It is not possible to call emergency numbers either when keypad lock is activated.
Control key
The control key enables you to navigate the menus and input fields, and also to
call up certain functions depending on the situation.
Template Go, Version 1, 01.07.2014 / ModuleVersion 1.0
In the description below, the side of the control key (up, down, right, left) that you have to press
in the different operating situations is marked in black, e.g.
for "press right on the control
key" or
for "press the centre of the control key".
In idle status
Open the directory
Open the list of available online directories
Open the main menu
Open the list of handsets
Press briefly
Press and hold
or
In submenus, selection and entry fields
Confirm a function
During a conversation
Open the directory
Open the list of available online directories
Mute the microphone
Initiate an internal consultation call
Adjust the loudspeaker volume for receiver and handsfree
mode
Press and hold
17
Gigaset E630A GO / LUG_GO AU en / A31008-M2725-C401-1-7619 / operating.fm / 11/8/17
Getting to know your telephone
Volume keys
Set volume for receiver/headset, ringtone, handsfree mode and indicating appointments:
Press the volume keys
/
on the right side of the handset
Display keys
The display keys perform a range of functions depending on the operating situation.
Back
Save
Current display key
functions
Display keys
Display key icons
p. 118.
The display keys have a function preset by default in idle status. Changing the assignp. 86
ment:
Menu guidance
The functions of your telephone are displayed in a menu that consists of several levels
p. 120
Select/confirm functions
Confirm selection using
OK or press the middle of the control key
One menu level back using
Back
Template Go, Version 1, 01.07.2014 / ModuleVersion 1.0
Change to idle status by
Press and hold
Switch function on/off using
Change
on
/ off
Activate/deactivate option using
Select
activated
/ not activated
Main menu
In idle status:
the control key
Press the centre of the control key
to select a submenu
. . . use
Example
OK
Settings
The main menu functions are shown in the display as icons. The
icon for the selected function is highlighted in colour and the
name of the associated function appears in the display header.
Back
18
OK
Gigaset E630A GO / LUG_GO AU en / A31008-M2725-C401-1-7619 / operating.fm / 11/8/17
Getting to know your telephone
Submenus
The functions in the submenus are displayed as lists.
To access a function:
function OK
. . . use the control key
Example
to select a
Settings
Return to the previous menu level:
Press the display key Back
Date/Time
or
Display
¤
¤
Briefly press the End call key
Audio Settings
Language
Registration
Returning to idle status
¤
Back
OK
Press and hold the End call key
If no key is pressed, the display will automatically change to idle status after around
2 minutes.
Entering text
Input position
¤
¤
Use
to select an entry field. A field is activated when the
cursor is blinking inside it.
Use
to move the position of the cursor.
Correcting incorrect entries
• Delete characters to the left of the cursor:
Press briefly
• Delete words to the left of the cursor:
Press and hold
New Entry
First Name:
Peter|
Surname:
Phone (Home):
Template Go, Version 1, 01.07.2014 / ModuleVersion 1.0
Entering letters/characters
Abc
‚
Multiple letters and numbers are assigned to each key between
Save
and
and the
key. As soon as a key is pressed, the
possible characters are displayed at the bottom of the display. The
selected character is highlighted.
• Selecting letters/digits: Press the key briefly several times in succession
• Switch between lower case, upper case and number entry mode: Press the hash
key
When editing a directory entry, the first letter and each letter following a space is automatically in upper case.
• Entering special characters: Press the star key
. . . use
to navigate to the
desired character Insert
The availability of special characters depends on the character set of the handset,
p. 117.
19
Gigaset E630A GO / LUG_GO AU en / A31008-M2725-C401-1-7619 / telephony.fm / 11/8/17
Making calls
Making calls
Making calls
¤ . . . use to enter the number
briefly press the Talk key
The connection is selected by the send connection set for the handset (line). To use another line:
¤ Press and hold the Talk key
. . . use
to select the line Dial . . . use
to enter
the number . . . the number is dialled approximately 3 seconds after the last digit is entered
Cancel dialling:
Press the End call key
Information for Calling Line Identification:
p. 28
If the display backlight is deactivated, you can reactivate it by pressing any key. Digit
keys that are pressed appear in the display for pre-dialling, other keys have no further
function.
Dialling from the directory
¤
. . . use
to open the directory
If multiple numbers are entered:
. . . use
to select a number
¤
. . . use
to select an entry
press the Talk key
press the Talk key
. . . the number is dialled
For fast access (quick dial): Assign numbers from the directory to the digit or display
keys.
Choose from: a public directory
p. 39, the Gigaset.net directory
p. 41
Template Go, Version 1, 01.07.2014 / ModuleVersion 1.0
Dialling from the redial list
The redial list contains the 20 numbers last dialled with the handset.
¤ Briefly press the Talk key
. . . the redial list is opened . . . use
to select an entry
press the Talk key
If a name is displayed:
View . . . the number is displayed . . . use
to browse numbers if necessary
the desired number is reached press the Talk key
¤
20
. . . when
Gigaset E630A GO / LUG_GO AU en / A31008-M2725-C401-1-7619 / telephony.fm / 11/8/17
Making calls
Managing entries in the redial list
¤
Briefly press the Talk key
. . . the redial list is opened
. . . use
to select an entry
Options . . . possible options:
Copy an entry to the directory:
Copy to Directory OK
Copy the number to the display:
¤
Display number OK . . . use
to amend or add numbers if necessary . . .
use
to save as a new entry in the directory
Delete the selected entry:
Delete entry OK
Delete all entries:
Delete List OK
Dialling from the call list
The call lists ( p. 34) contain the most recent accepted, outgoing and missed calls.
¤
. . . use
to select
Call Lists OK . . . use
Example
to select a list
OK
. . . use
to select an entry
All calls
Press the Talk key
Frank
14.02.17, 15:40
The call lists can be displayed directly by pressing the
display key Calls if the relevant function has been
assigned to the display key.
089563795
13.02.17, 15:32
The Missed calls list can also be opened by pressing
the Message key
.
11.02.17, 13:20
Susan Black
View
Options
One touch call
Template Go, Version 1, 01.07.2014 / ModuleVersion 1.0
A saved number is dialled by pressing any key. This allows children
who are not yet able to enter a number to call a certain number, for
example.
¤
. . . use
to select
One Touch Call
tion
Call to
OK
. . . use
07:15
INT 1
Activate one touch call mode:
Additional Features
. . . use
OK
to activate Activa-
to enter the number
Save
OneTouchCall active
0891234567
. . . the active one touch mode is shown in the idle display
Make a one touch call:
dialled
Cancel dialling:
Press any key . . . the saved number is
Press the End call key
End one touch call:
22 Feb
OFF
.
Press and hold the End call key
21
Gigaset E630A GO / LUG_GO AU en / A31008-M2725-C401-1-7619 / telephony.fm / 11/8/17
Making calls
Incoming calls
An incoming call is indicated by ringing, by a display on the screen and by the flashing Talk
key
.
Accept a call:
Press the Talk key
If Auto Answer is activated: Remove the handset from the charging cradle
Forward to the answer machine:
(for calls to the fixed line number)
Accept a call on the headset
•
•
•
•
Switch off ringtone:
display
Silence . . . the call can be accepted for as long as it is shown on the
Switch Easy Acceptance on/off
Press the Talk key
the call.
¤
. . . use
Acceptance
to accept the call or press the keys
to select
Edit (
Settings
OK
...
Telephony
,
and
OK
to accept
Easy
= activated)
Changes are only saved permanently in Profile Personal.
Information about the caller
The caller's phone number is displayed. If the caller's number is saved in the directory, the name
is displayed.
The caller's number will be transferred (
p. 28).
Template Go, Version 1, 01.07.2014 / ModuleVersion 1.0
Accepting/rejecting call waiting
A call waiting tone indicates a call during an external call. The number or the name of the caller
is displayed if the phone number is transferred.
• Reject a call: Options
Reject waiting call OK
• Accept a call: Accept . . . speak to the new caller. The previous call is placed on hold.
• End the call, resume the on-hold call: Press the End call key
.
Making internal calls
¤
Press briefly . . . the handset list is opened, this handset is indicated by <
to select handset or Call all (group call)
Press the Talk key
Multiple handsets have been registered to the base station (
22
p. 73).
. . . use
Gigaset E630A GO / LUG_GO AU en / A31008-M2725-C401-1-7619 / telephony.fm / 11/8/17
Making calls
Fast access for group call:
¤
or
Press briefly
press and hold
Internal calls to other handsets registered to the same base station are free of charge.
You hear the busy tone if:
• There is already an internal connection
• The handset being called is not available (deactivated, outside of range).
• The internal call is not accepted within 3 minutes.
Internal consultation call/internal transfer
Call an external participant and transfer the call to an internal participant or hold a consultation
call with him or her.
¤
. . . the list of handsets is opened . . . use
to select a handset or Call all
. . . the internal participant(s) are called . . . possible options:
OK
Hold a consultation call:
¤ Speak to the internal participant
Return to the external call:
¤ Options
End active call OK
Transfer the external call when the internal participant has answered:
¤ Announce an external call Press the End call key
Transfer the external call before the internal participant answers:
¤ Press the End call key
. . . the external call is forwarded immediately. If the
internal participant does not answer or the line is busy, the external call will
automatically return to you.
End the internal call if the internal participant does not answer or the line is busy:
¤ End . . . You return to the external call
Template Go, Version 1, 01.07.2014 / ModuleVersion 1.0
Accepting/rejecting call waiting
An external call arriving during an internal call is indicated with a call waiting tone. If the number
is transferred, you will see the number or the name of the caller on the display.
• Rejecting a call: Reject
The call waiting tone is turned off. The call continues to be indicated on the other registered
handsets.
• Accepting a call: Accept . . . Speak to the new caller, the previous call is placed on hold.
Internal call waiting during an external call
If an internal participant attempts to call you while you are involved in an external or internal call,
this call is shown on the display (Call Waiting).
• End display: Press any key
• Accept the internal call: End your current call
The internal call is indicated in the usual way. You can accept the call.
23
Gigaset E630A GO / LUG_GO AU en / A31008-M2725-C401-1-7619 / telephony.fm / 11/8/17
Making calls
During a conversation
Handsfree mode
Activating/deactivating handsfree mode during a call, when establishing a connection and
when listening to the answer machine :
¤ Press the handsfree key
Placing the handset in the charging cradle during a call:
¤
Press and hold down the handsfree key
cradle . . . hold
for a further 2 seconds
. . . Place the handset in the charging
Call volume
Applies to the current mode, handsfree mode or handset (or headset when the handset has a
headset connection):
Press the volume keys
/
or
. . . Use
/
or
to set the volume
Save
The setting is automatically saved after around 3 seconds, even if Save is not pressed.
Muting the microphone
When the microphone is switched off, callers will no longer hear you.
Template Go, Version 1, 01.07.2014 / ModuleVersion 1.0
Switch the microphone on/off during a call:
24
Press
.
Gigaset E630A GO / LUG_GO AU en / A31008-M2725-C401-1-7619 / telephony_voip.fm / 11/8/17
Making calls via the Internet (VoIP)
Making calls via the Internet (VoIP)
Internet telephony (VoIP) is available via provider VoIP accounts and Gigaset.net.
The phone is connected to the Internet.
VoIP via a provider: At least one VoIP account has been set up (
p. 90).
VoIP via Gigaset.net: The phone has been registered to Gigaset.net (
Send and receive connections are assigned (
p. 91).
p. 91).
Maximum number of VoIP accounts:
6
Maximum number of concurrent IP calls:
2
This chapter contains information on requirements for making calls via VoIP.
Standard functions for making calls
p. 20.
Making a call
Permanently assigned send connection
A fixed send connection is assigned to the handset.
Use assigned send connection:
¤ Use to enter the number
Briefly press the Talk key
Change the send connection:
¤ Press and hold the Talk key
. . . Use
to select the connection Dial
. . . Use
to enter the number . . . The number is dialled approximately 3.5 seconds after
the last digit is entered
Template Go, Version 1, 01.07.2014 / ModuleVersion 1.0
Numbers ending with the suffix #9 are automatically dialled via the Gigaset.net
connection ( p. 90). The calls are free of charge.
Selecting a connection at each call
Instead of a send connection, "Sel. at each call" is assigned to the handset.
¤
Use
to enter the number
connection Dial
Press the Talk key
. . . Use
to select the
Using an alternative connection/connection list on the display key
An "alternative connection" or the list of all configured connections is assigned to a display key.
¤
Press the display key Sel. Line
. . . Use
to select the connection
Dial
. . . Use
to enter the number . . . The number is dialled approximately 3.5 seconds after the last digit
is entered
25
Gigaset E630A GO / LUG_GO AU en / A31008-M2725-C401-1-7619 / telephony_voip.fm / 11/8/17
Making calls via the Internet (VoIP)
Any dialling plan that has been defined for the dialled phone number is ignored. The selected
send connection is always used.
Calling an IP address (provider-dependent)
¤
¤
Use the star key
to separate the sections of the IP address (e. g. 149*246*122*28).
Use the hash key
to attach the SIP port number of the call participant to the IP address
(e. g. 149*246*122*28#5060).
If the VoIP provider does not support the dialling of IP addresses, each part of the address will be
interpreted as a normal phone number.
Incoming calls
Only calls to the receive connections assigned to the handset are signalled.
If no receive connections have been assigned, all incoming calls are signalled on all
registered handsets.
If receive connections are configured but a connection is not assigned to a handset or
answer machine, calls for this connection are not signalled.
If the number is only assigned to an answer machine, the call will not be signalled. If
the answer machine is switched on, it will accept the call.
Accept a call:
Reject a call:
Press the Talk key
.
Press the End call key
Diverting a call to answer machine (
p. 43)
Options
Divert to AM
Call transfer
Template Go, Version 1, 01.07.2014 / ModuleVersion 1.0
Connecting an external call to a VoIP connection with a second external participant (depending
on the provider).
¤ Use the display key Ext. Call to establish an external consultation call . . . Use to enter
the number of the second participant . . . The active call is placed on hold . . . The second
participant is called and picks up Press the
key . . . the call is transferred
Further settings for call transfer in Web configurator
¤
26
Settings
Telephony
Advanced VoIP Settings
Gigaset E630A GO / LUG_GO AU en / A31008-M2725-C401-1-7619 / telephony_voip.fm / 11/8/17
Making calls via the Internet (VoIP)
Call transfer – ECT (Explicit Call Transfer)
The feature is supported by the network provider.
Activate/deactivate ECT
¤
. . . Use
Change (
to select
Select Services
OK
Transfer (ECT)
= on)
Transferring a call
Template Go, Version 1, 01.07.2014 / ModuleVersion 1.0
You are making an external call via a VoIP connection and wish to transfer the call to another
external participant. The external call is held in the same way as it is during call transfer.
¤ Press the End call key
(during a conversation or before the second participant has
answered).
27
Gigaset E630A GO / LUG_GO AU en / A31008-M2725-C401-1-7619 / netservices.fm / 11/8/17
Provider-specific functions (network services)
Provider-specific functions (network services)
Network services depend on the network (analogue fixed line network or IP telephony) and on
the network provider (service provider) and must be requested from that provider if required.
You will find a description of the features on your network provider's website or at one of their
store branches.
If you require assistance, please contact your network provider.
Requesting network services may incur additional costs. Please consult your network
provider.
Network services fall into two distinct groups:
• Network services that are activated when in idle status for the following call or all subsequent
calls (for example, "calling anonymously"). These are activated/deactivated via the
Select Services menu.
• Network services that are activated during an external call, (for example,"consultation call",
"setting up conference calls"). These are made available during an external call either as an
option or by using a display key (e.g. Ext. Call, Conference).
To activate/deactivate the features, a code is sent to the telephone network.
¤ After a confirmation tone from the telephone network, press .
It is not possible to reprogram the network services.
Calling Line Identification
During a call, the caller's number is transferred (CLI = Calling Line Identification) and may be displayed on the recipient's display (CLIP = CLI presentation). If the caller's number is withheld, it
will not be displayed to the recipient. The call is made anonymously (CLIR = CLI Restriction).
Template Go, Version 1, 01.07.2014 / ModuleVersion 1.0
Caller display for incoming calls
Calling Line Identification
The caller's phone number is displayed. If the caller's number is saved in the directory, the name
is displayed.
No Calling Line Identification
Instead of name and number, the following is displayed:
• External: No number has been transferred.
• Withheld: Caller has withheld Calling Line Identification.
• Unavailable: Caller has not authorised Calling Line Identification.
28
Gigaset E630A GO / LUG_GO AU en / A31008-M2725-C401-1-7619 / netservices.fm / 11/8/17
Provider-specific functions (network services)
Transferring the name from the online directory
It is also possible to display the name of the caller as stored in the online directory instead of the
number.
The provider of the online directory supports this function.
The "Display caller name" function has been activated via the Web configurator.
The caller has authorised Calling Line Identification and has not withheld the
function.
The telephone is connected to the Internet.
The caller's number is not saved in the handset's local directory.
Call waiting during an external call
During an external call, a call waiting tone indicates another
external caller. If the number is being transferred, you will see the
number or the name of the caller on the display.
Reject waiting caller:
¤ Options
Reject waiting call
caller hears the busy tone
Call Waiting
OK . . . the waiting
1234567
Accept the waiting call:
¤ Accept
Once you have accepted the waiting call, you can switch
between the two callers or speak to both simultaneously ("Conference"
p. 31).
Accept
Options
Activating/deactivating call waiting
¤
. . . use
Template Go, Version 1, 01.07.2014 / ModuleVersion 1.0
Switch on/off:
Activate:
to select
¤
¤
Select Services
Status: . . . use
Send
OK
Call Waiting
OK . . . then
to select On or Off
Call waiting is activated or deactivated for all registered handsets.
Call divert
When diverting a call, the call is forwarded to another connection.
A distinction is made between
• Diverting calls to an external phone number and
• Diverting calls internally
29
Gigaset E630A GO / LUG_GO AU en / A31008-M2725-C401-1-7619 / netservices.fm / 11/8/17
Provider-specific functions (network services)
Diverting calls to an external connection
A call divert can be set up for every connection (fixed line number and VoIP
connection) that has been assigned to the handset as a receive connection (
¤
. . . use
to select
to select receive connection
Select Services
OK
OK
Call Divert
OK
p. 91).
. . . use
. . . then
Switch on/off: Status: . . . use
to select On or Off
Enter the number for call diverting:
¤
To Phone Number . . . use
to enter the number
¤ Enter a different Gigaset.net number to divert the Gigaset.net number.
Set the time for call divert:
¤
When . . . use
to select the time for call divert
All Calls: Calls are diverted immediately
No Answer: Calls are diverted if no one accepts the call within several rings.
When Busy: Calls are diverted if the line is busy.
Activate: Send
For call divert with a fixed line connection: A connection is established to the telephone
network . . . a confirmation is sent from the telephone network Press the End call key
Diverting calls may incur additional costs. Please consult your network provider.
Internal Call Divert
Divert external calls that are made to one of the receive connections of the handset (
to a different handset.
Template Go, Version 1, 01.07.2014 / ModuleVersion 1.0
¤
. . . use
to select
Select Services
OK
Call Divert
p. 91),
OK
Internal OK . . . then
Switch on/off: Activation . . . use
to select On or Off
Select the handset:
¤
To Handset
. . . use
to select an internal participant
No Handset is displayed if internal Call Divert has not been set previously or if the
previously set handset is no longer registered.
Delay time for answering the call:
¤
Ring Delay
. . . use
to select None / 10 sec. / 20 sec. / 30 sec.
None: The call is immediately diverted.
Activate: Save
Internal calls are diverted once only. If calls to the handset are diverted to another handset (e.g.
INT 1) that also has call divert activated (e.g. to INT 2), this second call divert is not initiated. The
calls are indicated on handset INT 1.
Any call that has been diverted is entered in the call lists.
30
Gigaset E630A GO / LUG_GO AU en / A31008-M2725-C401-1-7619 / netservices.fm / 11/8/17
Provider-specific functions (network services)
Calls with three participants
Consultation calls
Make another external call during an external call. The first call is
placed on hold.
¤ Ext. Call . . . use to enter the number of the second
participant . . . the active call is placed on hold and the
second participant is called
If the second participant does not answer:
End
Ending a consultation call
¤
Options
End active call
the first caller is reactivated
OK . . . the connection to
or
¤
Press the End call key
is initiated
Consultation
Call to:
12
On hold:
025167435
End
Options
. . . a recall to the first participant
Template Go, Version 1, 01.07.2014 / ModuleVersion 1.0
Conference
Speaking to both participants at the same time.
¤ During an external call, dial the number of a second participant (consultation call) or accept
a waiting caller . . . then
Initiate conference call:
¤ Conf. . . . all callers can hear one another and hold a conversation with one another
Return to call swapping:
¤ End Conf. . . . You will be reconnected to the participant with whom the conference call
was initiated
End call with both participants:
¤ Press the End call key
Each of the participants can end their participation in the conference call by pressing the End
call key
or hanging up.
31
Gigaset E630A GO / LUG_GO AU en / A31008-M2725-C401-1-7619 / call_list.fm / 11/8/17
Message lists
Message lists
Notifications about missed calls, messages on the answer machine/network mailbox, received
SMS messages and missed alarms are saved in the messages list.
As soon as a new message arrives, an advisory tone will sound. The Example
Message key
also flashes (if activated
p. 33).
Icons for message types and the number of new messages are
shown on the idle display.
Notification for the following message types is available:
07:15
INT 1
14 Oct
on the answer machine/network mailbox
in the missed calls list
in the SMS message list
02
10
09
08
in the missed alarms list
Calls
Calendar
The icon for the network mailbox is always displayed, provided the number is stored
in the telephone. The other lists are only displayed if they contain messages.
Display messages:
¤ Press the Message key
. . . Messages lists that contain
messages are displayed, Mailbox: is always displayed
An entry is marked in bold: new messages are available. The
number of new messages is shown in brackets.
An entry is not marked in bold: no new messages. The number
of old messages is shown in brackets.
¤ . . . use to select a list OK . . . the calls or messages are
listed
Network mailbox: The network mailbox number is dialled.
Example
Messages & Calls
Missed Alarms:
(2)
Missed Calls:
(5)
Mailbox:
(1)
Answer Mach.:
Template Go, Version 1, 01.07.2014 / ModuleVersion 1.0
Back
OK
The message list contains an entry for every answer machine assigned to the handset,
e.g. for the local answer machine or for a network mailbox.
32
Gigaset E630A GO / LUG_GO AU en / A31008-M2725-C401-1-7619 / call_list.fm / 11/8/17
Message lists
Activating/deactivating Message key flashing
Receipt of new messages is displayed by a flashing message key on the handset. This type of
alert can be activated/deactivated for each message type.
In idle status:
¤
Press keys
appears in the display
. . . the number 9
. . . use
Messages on the network mailbox
missed calls
new SMS
Messages on the answer machine
¤
¤
¤
¤
. . . the number 9 followed by the entry (e.g. 975) is displayed,
the current setting for the select message type flashes in the
entry field (e.g. 0)
. . . use
to set the action for the arrival
of new messages:
¤
System
to select the message type:
The Message key flashes
The Message key does not flash
¤
¤
975 SET:
[0]
Back
OK
. . . confirm selected setting with OK
or
¤
return to idle display without making changes:
Back
Gigaset GO: The telephone will send a notification of newly received calls to your
smartphone.
The Gigaset elements app has been installed on the smartphone.
The telephone has been registered with Gigaset elements (
rator).
web configu-
Template Go, Version 1, 01.07.2014 / ModuleVersion 1.0
Further information about Gigaset GO can be found at
www.gigaset.com/go
33
Gigaset E630A GO / LUG_GO AU en / A31008-M2725-C401-1-7619 / call_list.fm / 11/8/17
Call lists
Call lists
The telephone saves different types of calls (missed, accepted and outgoing calls) in lists.
List entry
The following information is displayed in the list entries:
• The list type (in the header)
• Icon for the type of entry:
Missed calls,
Accepted calls,
Outgoing calls,
Call on the answer machine
• Caller's number. If the number is stored in the directory, the
name and number type ( Phone (Home),
Phone (Office),
Phone (Mobile)) are shown instead. In the event of missed
calls, the number of missed calls from this number is also
shown in square brackets.
• Connection by which the call was received/made
• Date and time of call (if set)
Example
All calls
Frank
Today, 15:40
[3]
089563795
13.05.17, 18:32
Susan Black
12.05.17, 13:12
View
Options
Opening the call list
Via the display key:
Via the menu:
¤
¤
Calls
. . . use
. . . use
to select the list OK
to select
Call Lists
OK
the list OK
Via the Message key (missed calls):
¤ Press the Message key
. . . use
Missed Calls:
to select
OK
Calling back a caller from the call list
¤
. . . use
to select
Template Go, Version 1, 01.07.2014 / ModuleVersion 1.0
to select entry
Call Lists
OK
. . . use
to select list
OK
. . . use
Press the Talk key
Additional options
¤
. . . use
options:
to select
Call Lists
OK
¤ . . . use to select entry
View an entry:
Copy the number to the directory:
¤ . . . use to select entry
Delete an entry: ¤ . . . use
to select entry
¤ Options
Delete List
Delete list:
34
. . . use
to select list
OK . . . possible
View
Options
Options
OK Yes
Copy to Directory
Delete entry OK
Gigaset E630A GO / LUG_GO AU en / A31008-M2725-C401-1-7619 / directory.fm / 11/8/17
Local handset directory
Local handset directory
The local directory is unique to the handset. However, it is possible to send entries to other
handsets ( p. 37).
Opening the directory
¤
Briefly press
in idle status
Directory entries
Number of entries:
up to 200
Information:
First name and surname, up to three telephone numbers, anniversary
with alert, VIP ringtone with VIP icon
Length of the entries:
Numbers: max. 32 digits
First name, surname: max. 16 characters
Creating an entry
¤
<New Entry>
OK
. . . use
to switch
Example
Template Go, Version 1, 01.07.2014 / ModuleVersion 1.0
between the entry fields and enter data for an entry:
New Entry
Names/numbers:
¤ . . . use to enter first names and/or surnames, at least First Name:
Robert
one number (personal, office, or mobile) and an e-mail
Surname:
address, if applicable
I
Anniversary:
¤ . . . use to activate/deactivate Anniversary . . . use Phone (Home):
to enter date and time . . . use
to select type of
Abc
alert (Visual only or a ringtone)
‚
Save
Caller Melody (VIP):
¤ . . . use to select the ringtone that will indicate a call
from the participant . . . if a Caller Melody (VIP) has been assigned, the entry will appear
in the directory with the
icon.
Save entry: Save
The entry is only valid if it contains at least one number.
For Caller Melody (VIP): the telephone number of the caller must be supplied.
35
Gigaset E630A GO / LUG_GO AU en / A31008-M2725-C401-1-7619 / directory.fm / 11/8/17
Local handset directory
Searching for/selecting a directory entry
¤
. . . use
to browse searched names
or
¤
. . . use
to enter initial letters (max. 8 letters) . . . the display jumps to the first name
to continue browsing to the desired entry, if
starting with these initial letters . . . use
needed
Scroll through directory:
Press and hold
Displaying/changing an entry
¤
. . . use
changed Edit
to select entry
View
. . . use
to select the field to be
or
¤
. . . use
to select an entry
Options
Edit entry
OK
Deleting entries
Delete the selected entry:
entry OK
. . . use
Options
Delete all entries:
to select an entry
Delete all
OK
Options
Delete
Yes
Setting the order of the directory entries
Directory entries can be sorted by first name or surname.
¤
Options
Sort by Surname / Sort by First Name
If no name was entered, the default telephone number is shown in the surname field. These
entries appear at the beginning of the list, regardless of how the entries are sorted.
The sort order is as follows:
Template Go, Version 1, 01.07.2014 / ModuleVersion 1.0
Space | Digits (0-9) | Letters (alphabetically) | Other characters.
Displaying the number of entries available in the directory
¤
Options
Available Memory
OK
Copying number to the directory
Copy numbers to the directory:
• From a list e.g. the call list or the redial list
• From the text of an SMS
• From a public online directory or classified directory
• When dialling a number
The number is displayed or highlighted.
Press the display key
or Options
Copy to Directory OK . . . possible options:
Create a new entry:
¤ <New Entry> OK . . . use to select number type OK complete entry Save
¤
36
Gigaset E630A GO / LUG_GO AU en / A31008-M2725-C401-1-7619 / directory.fm / 11/8/17
Local handset directory
Add number to an existing entry:
¤ . . . use to select an entry OK . . . use to select number type OK . . . the
number is entered or a prompt to overwrite an existing number is displayed . . . if
required, answer the prompt with Yes/No Save
Copying an entry/directory
The sending and receiving handset must both be registered to the same base station.
The other handset and the base station are able to send and receive directory entries.
An external call interrupts the transfer.
Caller pictures and sounds are not transferred. Only the date is transferred for an
anniversary.
Both handsets support vCards:
• No entry with the name is available: a new entry is created.
• An entry with the name is already available: The entry is expanded to include the
new numbers. If the entry contains more numbers than allowed by the recipient
handset, a second entry is created with the same name.
The recipient handset does not support vCards:
A separate entry is created and sent for each number.
The sending handset does not support vCards:
A new entry is created on the receiving handset and the transferred number is added
to the Phone (Home) field. If an entry with this number already exists, the copied number is discarded.
Copying individual entries
¤
. . . use
Template Go, Version 1, 01.07.2014 / ModuleVersion 1.0
Internal
OK
to select the desired entry
. . . use
Options
Copy Entry
to select the receiving handset
Copy the next entry after successful transfer:
OK
to
OK . . . the entry is copied
Press Yes or No
Use vCard via SMS to send a directory entry in vCard format by SMS.
Copying the entire directory
¤
Options
receiving handset
Copy All
OK
to Internal
OK
. . . use
to select the
OK . . . the entries are copied one after the other
37
Gigaset E630A GO / LUG_GO AU en / A31008-M2725-C401-1-7619 / directory.fm / 11/8/17
Local handset directory
Copying directory entries from a smartphone (Gigaset GO)
The phone is connected to the Internet.
The Gigaset ContactsPush app has been installed on the smartphone.
Template Go, Version 1, 01.07.2014 / ModuleVersion 1.0
Further information is available at
38
www.gigaset.com/contactspush
Gigaset E630A GO / LUG_GO AU en / A31008-M2725-C401-1-7619 / directory_IP.fm / 11/8/17
Online directories
Online directories
Depending on the provider you can use public online directories, e. g. online directory and Yellow Pages.
The online directory is configured via the Web configurator.
Exclusion of liability
Gigaset Communications GmbH assumes no guarantee or liability for the availability of this
service. The service may be discontinued at any time.
Opening an online directory/Yellow Pages
¤
Press and hold . . . The list of online directories is displayed with provider-specific
names
. . . Use
to select the online directory or Yellow Pages from the list
OK
Calls to the online directory are always free of charge.
Searching for an entry
¤
Press and hold . . . Use
enter search criteria
. . . Use
Template Go, Version 1, 01.07.2014 / ModuleVersion 1.0
Searching for a telephone number:
to select a directory/Yellow Pages
OK
to switch between the entry fields
. . . Use
to
Search . . . then
Enter name and town/city
Name/category: ¤ . . . use
to enter the name or the category (max. 30 characters)
Town/city:
The names of towns/cities most recently entered are displayed (maximum 5).
¤ . . . Use to enter the name of the town/city in which the participant you
are searching for lives (max. 30 characters)
¤ or select one of the displayed town/city names using
Start search:
¤ Search . . . the search will be started
Town/city details unclear: . . . possible town/city names are displayed . . . use
to select a
town/city name OK
Searching for a name (reverse search):
Number:
Start search:
¤
¤
Enter the number
. . . Use
to enter the number (max. 30 characters)
Search . . . the search is started
The selected online directory supports the number search.
No entries found to match the search criteria given:
• Start a new search: New
• Change search criteria: Change
39
Gigaset E630A GO / LUG_GO AU en / A31008-M2725-C401-1-7619 / directory_IP.fm / 11/8/17
Online directories
Too many entries found:
• Start a refined search: Refine
• The number of hits appears in the display (depends on the provider).
Display hit list: View
Start a refined search
The refined search limits the number of hits returned by a previous search using additional
search criteria (first name and/or street).
¤ Refine
or
¤
Options
Refine Search
OK
. . . The search criteria are transferred from the previous search and are entered into the
corresponding fields . . . Edit or add search criteria, e.g. enter first names or street Search
Search result (hit list)
The first entry found is displayed. The consecutive number of the
entry displayed and the hit number is visible at the top right
(e.g. 1/50).
Scroll through the list:
Refine search criteria and restrict hit list:
¤ Options
Refine Search OK (
Template Go, Version 1, 01.07.2014 / ModuleVersion 1.0
Online Directory
1/50
Sand, Marie Elisabe ...
Display the full entry:
¤ View . . . all entry information is displayed in full
to scroll through the entry
Start a new search:
¤ Options
Example
New Search
OK
0049123456789
. . . use
Parkstraße 11
Berlin 12345
p. 39)
View
Options
Copy an entry to the local directory:
¤ Options
Copy to Directory OK . . . Use
to select <New Entry> or an
existing entry OK Save . . . The entry is saved, the complete name is transferred to
the Surname field of the local directory
Calling participants
¤
Select entry
Press the Talk key
If the entry only contains one phone number, this is the one that is dialled.
If the entry contains more than one number, a list of numbers is displayed.
¤
Select number Dial
40
Gigaset E630A GO / LUG_GO AU en / A31008-M2725-C401-1-7619 / directory_IP.fm / 11/8/17
Gigaset.net directory
Gigaset.net directory
The Gigaset.net directory contains all participants registered on Gigaset.net.
Opening the Gigaset.net directory
¤
Press and hold . . . The list of online directories is opened
Gigaset.net
OK . . .
The Gigaset.net directory is opened
or
¤
. . . Use
key
to dial the phone number of the Gigaset.net directory (1188#9)
Press the Talk
. . . The Gigaset.net directory is opened
When the Gigaset.net directory is opened for the first time:
( p. 91)
Register with Gigaset.net
Searching for participants on the Gigaset.net directory
¤
Press and hold
Gigaset.net OK . . . use
to enter a name or part of a name
(max. 25 characters)
Options
Search
OK
Search successful: A hit list is displayed containing all the names
that begin with the specified character string. The consecutive
number of the marked entry and the hit number is visible at the top
right (e.g. 1/5).
¤ . . . Use to scroll through the hit list
No matching entry found:
Start a new search:
Gigaset.net
1/5
Saal, Frank
Sailor, Ben
Sailor, Anna
New
Change search criteria: Change . . . the defined name is copied
. . . Change or extend name . . . Repeat search
Template Go, Version 1, 01.07.2014 / ModuleVersion 1.0
Example:
Too many matching entries, no hit list:
Sand, Marie Elisabe ....
Sand, Otto
View
Options
Start a refined search: Refine . . . the defined name is copied
. . . extend the name using
. . . Repeat search
Hit list too long:
Start a refined search: Options
Refine Search
. . . extend the name using
. . . Repeat search
OK . . . the defined name is copied
Desired participants not found:
Start a new search:
Repeat search
Options
New Search
OK
. . . enter new name using
...
41
Gigaset E630A GO / LUG_GO AU en / A31008-M2725-C401-1-7619 / directory_IP.fm / 11/8/17
Gigaset.net directory
Displaying an entry
¤
¤
. . . Use
to select participant from the hit list View . . . The display shows the
Gigaset.net number and the participant's name. The name may appear over a number of
lines
. . . Use
to display the name and number of the next/previous participant in the hit list
Copying an entry to the local directory
¤
. . . use
to select entry Options
Copy to Directory OK . . . use
to select
<New Entry> or an existing entry OK change entry if necessary Save . . . The entry is
saved, number and name (abbreviated if necessary, max. 16 characters) are copied to the
local directory ( p. 35)
Calling a Gigaset.net participant
¤ From the Gigaset.net directory: . . . Use
to select participant in the hit list
Press the
Talk key
or
¤
Enter number directly (in idle status):
(including #9)
. . . Use
to enter a Gigaset.net number
Press the Talk key
or
¤
From the local directory:
number
Briefly press
. . . Use
to select a Gigaset.net phone
Press the Talk key
Every number ending with #9 is automatically dialled via Gigaset.net.
Template Go, Version 1, 01.07.2014 / ModuleVersion 1.0
Calls to the Gigaset.net directory are always free of charge.
Editing and deleting your own entry
¤
Press and hold
Gigaset.net OK Options
Own Details
OK . . . The
Gigaset.net number and the current name are displayed.
Entering/editing a name:
¤ Change . . . Use
to delete the name if necessary
or enter a new name (max 25 characters) Save
Note the data protection notice
. . . Use
to change the name
p. 91.
If the name is deleted, the entry is deleted from the directory and will not longer be
"visible" to other Gigaset.net participants. The Gigaset.net number can still be reached.
Display a number during a call:
42
Options
Service Info
OK
Gigaset E630A GO / LUG_GO AU en / A31008-M2725-C401-1-7619 / answering_m.fm / 11/8/17
Local answer machine
Answer machine
Local answer machine
Once the telephone has been set up, an answer machine (AB1) is activated. There are
two further answer machines available if, in addition to the fixed line connection, VoIP
connections have been configured and one or more receive connections have been
assigned to the answer machines.
Each answer machine only accepts calls that are addressed to one of its receive
connections and can only be operated using handsets to which at least one of its
receive connections has been assigned.
Receive connections can be set up using the web configurator.
Switching the answer machine on/off
The answer machine can be set to the following modes:
Answer & record The caller hears an announcement and is able to leave a message.
Answer only
The caller hears an announcement but cannot leave a message.
Alternating
The mode switches between Answer & record and Answer only at predetermined times.
¤
. . . use
use
to select
Answer Machine
OK
Activation
OK
...
to select Answer Machine (if more than one answer machine is available)
Change
Template Go, Version 1, 01.07.2014 / ModuleVersion 1.0
. . . then
to select On or Off
Switch on/off: ¤ Activation: . . . use
¤
Mode . . . use
to select mode
Set mode:
Set the time for Alternating mode:
¤ . . . use to switch between Record from and Record until . . . use
to enter hours/minutes in 4-digit format to set the start and end of
the period. (The time must be set.)
Save settings:
¤ Save
Operation using the handset
Playing back messages
¤
Press and hold the
key
Key 1 is assigned to the answer machine.
or
¤
Press the Message key
Answer Mach.:
OK
Answer Machine
OK
or
¤
. . . use
to select
Play Messages
to select Answer Machine (if more than one answer machine is available)
OK
. . . use
OK
43
Gigaset E630A GO / LUG_GO AU en / A31008-M2725-C401-1-7619 / answering_m.fm / 11/8/17
Local answer machine
The answer machine begins immediately with message playback. New messages are played
back first.
Actions during playback
•
•
•
•
•
•
•
•
•
•
•
Stop playback:
/
or use the display key: Options
Continue playback: Press
/
again or use the display key:
Continue
Go to the start of the current message: Press key
Repeat the last 5 seconds of the message: Press key
Skip to the next message: Press
or key
Skip to previous message during the time stamp playback:
¤ Press or key
Skip to next message during the time stamp playback:
¤ Press key
Mark a message as "new": Press key
or use the display key Options
Mark as new OK
An "old" message that has already been played back is displayed as a "new" message again.
The
key on the handset flashes.
Copying the phone number from a message to the directory: Options
Copy to
Directory . . . complete entry using
To delete a single message: Press Delete or key
Delete all old messages: Options
Delete old list OK Yes
Picking up a call from the answer machine
You can pick up a call while the answer machine is recording or is being operated remotely:
¤ Press the Talk key
or use display key Accept . . . recording is interrupted . . . speak to the
caller
Template Go, Version 1, 01.07.2014 / ModuleVersion 1.0
If three seconds of the message have already been recorded when you accept the call, the
on the handset flashes.
message is saved. The Message key
Forwarding an external call to the answer machine
An external call is indicated on the handset.
The answer machine is activated, is not in use and still has enough memory.
¤
Press the display key
. . . The answer machine starts immediately in answer and record
mode and records the call. The set time for ring delay ( p. 45) is ignored
Activating/deactivating two-way record
Pick up an external call with the answer machine:
¤ Inform the caller of the two-way recording Options
Two-way Record OK . . . twoway recording is indicated in the display by an advisory text and placed in the answer
machine list as a new message
End two-way recording:
44
End
Gigaset E630A GO / LUG_GO AU en / A31008-M2725-C401-1-7619 / answering_m.fm / 11/8/17
Local answer machine
Activating/deactivating call screening
During recording of a message you can screen a call via the handset loudspeaker:
Permanently switching call screening on/off:
¤
. . . use
to select
Answer Machine
Change (
OK
Call Screening
= on) . . . call screening is switched on/off for all registered handsets
Switching off call screening for the current recording:
¤ Press the display key Silence or the End call key
. . . Pick up call using
Operating when on the move (remote operation)
Access answer machine or switch answer machine on from another telephone (e.g. hotel, mobile
phone).
The system PIN is set to something other than 0000 and the other telephone has tone
dialling (DTMF).
Switching on the answer machine
¤
Call the telephone connection and let it ring until the announcement "Please enter PIN"
(approx. 50 seconds) . . . use
to enter the telephone's system PIN within 10 seconds . . .
the answer machine is switched on, the remaining memory is announced, messages are
played back
Incorrect PIN is entered or entry takes too long (more than 10 seconds): The
connection is interrupted. The answer machine will remain deactivated.
The answer machine cannot be deactivated remotely.
Template Go, Version 1, 01.07.2014 / ModuleVersion 1.0
Checking the answer machine
The answer machine is activated.
¤
Call the telephone connection . . . during the announcement press key
the announcement is interrupted Enter system PIN
. . . playback of
You are informed whether any new messages have been recorded. Message playback begins.
The answer machine is operated using the following keys:
During the time stamp playback: Skip to previous message.
During message playback: Go to the start of the current message.
Pause playback. Press again to resume.
After a pause of approx. 60 seconds, the connection is ended.
Go to the next message.
45
Gigaset E630A GO / LUG_GO AU en / A31008-M2725-C401-1-7619 / answering_m.fm / 11/8/17
Local answer machine
Repeat the last 5 seconds of the message playback.
During message playback: Delete current message.
Change the status of a previously played back message to "new".
The next message starts to play. The remaining memory is announced at the end of the last
message.
Cancelling remote operation
¤
Press the End call key
or replace the receiver
The answer machine will terminate the connection under the following circumstances:
• The entered system PIN is incorrect.
• There are no messages on the answer machine.
• After the remaining memory announcement.
Settings
Recording a personal announcement/advisory message
The phone is supplied with pre-recorded announcements for announcement and advisory
mode. If a personal announcement has not been recorded, the relevant pre-recorded
announcement is used.
¤
. . . use
use
to select
Answer Machine
OK
Announcements
to switch between Record Announcem. and Rec. Advisory Msg.
to select Answer Machine (if more than one answer machine is available)
OK
OK
...
. . . use
OK
OK
Template Go, Version 1, 01.07.2014 / ModuleVersion 1.0
. . . record your announcement (at least 3 seconds) . . . possible options
Complete the recording and save:
¤ End . . . the announcement is played back for you to check
¤ Press the End call key
or Back
Cancel the recording:
¤ OK
Resume the recording:
Repeat the recording:
¤ New
Recording ends automatically if the maximum recording time of 170 seconds is
exceeded or there is a break in speech for more than 2 seconds.
If the recording is cancelled, the default announcement is used.
The recording is cancelled or not started if the answer machine memory is full.
¤ Delete old messages . . . the answer machine switches back to Answer & record
mode
. . . repeat the recording, if needed
46
Gigaset E630A GO / LUG_GO AU en / A31008-M2725-C401-1-7619 / answering_m.fm / 11/8/17
Local answer machine
Listening to announcements/advisory messages
¤
. . . use
use
to select
Answer Machine
OK
Announcements
to switch between Play Announcement and Play Advisory Msg.
OK
to select Answer Machine (if more than one answer machine is available)
OK
...
. . . use
OK . . . the
announcement is played back . . . possible options:
Cancel playback:
¤ Press the End call key
Cancel playback and record a new announcement:
¤ New
or Back
If the answer machine's memory is full, it will switch to Answer only mode.
¤ Delete old messages . . . the answer machine switches back to Answer & record
any recording
. . . repeat
Deleting announcements/advisory messages
¤
. . . use
use
to select
Answer Machine
OK
Announcements
to switch between Delete Announcem. and Del. Advisory Msg.
OK
to select Answer Machine (if more than one answer machine is available)
OK
...
. . . use
OK
Yes
Once the announcement has been deleted, the relevant pre-recorded announcement is used
again.
Setting recording parameters
Template Go, Version 1, 01.07.2014 / ModuleVersion 1.0
¤
. . . use
to select
Answer Machine
OK
Recordings
OK . . . then
Maximum recording time:
¤ Length: . . . use to select timeframe
Recording quality:
¤
Quality . . . use
to switch between Long Play and Excellent (at higher
quality, the max. recording time will decrease)
When should a call be picked up:
¤
Ring Delay . . . use
to select a time
Save settings:
¤ Save
The following apply when setting is Automatic:
• No new messages available: a call will be picked up after 18 seconds.
• New messages available: a call will be picked up after 10 seconds.
When checking messages remotely ( p. 45) it is therefore apparent after 15 seconds that there
are no new messages waiting. No call costs are incurred if the call is ended immediately.
47
Gigaset E630A GO / LUG_GO AU en / A31008-M2725-C401-1-7619 / answering_m.fm / 11/8/17
Network mailbox
Network mailbox
Each network mailbox accepts incoming calls made via the corresponding line (fixed line network or corresponding VoIP phone number). In order to record all calls, a network mailbox
should be set up for both the fixed line network and the VoIP connection.
Fixed line network connection: The network mailbox has been requested from the
network provider.
The network mailbox is automatically called via the corresponding connection. An
automatic area code specific to the phone is not prefixed.
The network mailbox messages can be played back using the phone's keypad (digit
codes). For VoIP, you need to use the web configurator to define how the digit codes
are to be converted to DTMF signals and transmitted. Ask your VoIP provider which
type of DTMF transmission it supports.
Activating/deactivating the network mailbox, entering a
number
On the handset, you can manage the network mailboxes that are assigned to one of its receive
connections.
¤
. . . use
to select
Answer Machine OK
Network Mailbox OK
. . . use
to select connection if applicable
OK . . . then
For a fixed line network/connection
¤ . . . use to enter or amend the network mailbox number
Save
Template Go, Version 1, 01.07.2014 / ModuleVersion 1.0
To activate/deactivate the network mailbox for the fixed line network connection use
the phone number and a function code of your network provider. Please contact the
network provider if you require any further information.
For a VoIP connection
Activate/deactivate
network MB:
Enter number:
Save settings:
48
¤
¤
¤
Status . . . use
to select On or Off
Network Mailbox . . . use
to enter or amend the
network mailbox number
With some VoIP providers, the phone number has already been
downloaded together with the general VoIP provider data and
saved to the base station.
Save
Gigaset E630A GO / LUG_GO AU en / A31008-M2725-C401-1-7619 / answering_m.fm / 11/8/17
Set fast access for the answer machine
Playing back messages
¤ Press and hold
Key 1 has been assigned to the network mailbox.
or
¤
Press the Message key
Mailbox: IP1)
. . . use
to select network mailbox (Net AM: Fixed Line /
OK
or
¤
. . . use
to select
Answer Machine
OK
Play Messages
to select network mailbox (Mailbox: Net AM: Fixed Line / Mailbox: IP1)
Listen to announcement out loud:
OK
. . . use
OK
Press the handsfree key
Set fast access for the answer machine
It is possible to call a network mailbox or the telephone's local answer machine directly by
pressing key
.
Assigning key 1, changing assignment
Settings for the fast access are device-specific. A different answer machine can be assigned to
key
on each registered handset. The answer machine for the handset's receive connections
are offered, e.g. Net AM: Fixed Line, Mailbox: IP1, Answer Machine.
¤
. . . use
to select
Answer Machine OK
Set Key 1 OK . . . use
to select answer machine
Return to idle status:
Select (
= selected)
Press and hold the End call key
Template Go, Version 1, 01.07.2014 / ModuleVersion 1.0
Network mailbox
If no number has yet been saved for the network mailbox:
¤ . . . use to make a change in the line Network Mailbox
of the network mailbox
Save
. . . use
Press and hold the End call key
to enter the number
(idle status)
49
Gigaset E630A GO / LUG_GO AU en / A31008-M2725-C401-1-7619 / applications_1.fm / 11/8/17
Sound profiles
Additional functions
Sound profiles
The telephone has 3 sound profiles for adapting the handset to the environmental conditions:
Profile Loud, Profile Silent, Profile Personal
¤ Use
to switch between the profiles . . . the profile is changed straight away without a
prompt
The profiles are set as follows by default:
Default setting
Silent alert
Profile
Loud
Profile Silent
Profile
Personal
On
Same as
Off
Profile
Personal
Ringtone
Ringtone volume
Handset volume
On
Off
On
Internal
5
Off
5
External
5
Off
5
Receiver
5
3
3
Handsfree
LED light for a call
Advisory tones
5
3
3
Yes
No
No
Key click
Yes
No
Yes
Confirmation
tone
Yes
No
Yes
Battery tone
Yes
Yes
Yes
Template Go, Version 1, 01.07.2014 / ModuleVersion 1.0
Activate alert tone for an incoming call for Profile Silent: after switching to Profile Silent press
the display key Beep . . . the icon
appears in the status bar
Changes to the settings listed in the table:
• apply in the Loud and Silent profiles as long as the profile is not changed.
• are permanently saved in Profile Personal for this profile.
The set profile remains set when switching the phone off and back on.
50
Gigaset E630A GO / LUG_GO AU en / A31008-M2725-C401-1-7619 / applications_1.fm / 11/8/17
Spot LED
Spot LED
Use the telephone as a torch. The spot LED is located on the top of the handset (
p. 4).
Activating the torch function
Press the display key Spot LED.
¤
or
¤
. . . use
to select
Additional Features
OK
Spot LED
OK
Deactivating the torch function
Press the display key OFF
¤
or: after 2 minutes the function is automatically deactivated.
Visual indication of incoming calls
p. 83
Calendar
You can remind yourself of up to 30 appointments.
In the calendar, the current day is outlined in white; on days with
appointments, the numbers are displayed in colour. When a day
is selected, it will be outlined in colour.
September 2017
Mo Tu We Th Fr Sa Su
01 02 03
04 05 06 07 08 09 10
11 12 13 14 15 16 17
18 19 20 21 22 23 24
25 26 27 28 29 30 31
Back
OK
Template Go, Version 1, 01.07.2014 / ModuleVersion 1.0
Saving appointments to the calendar
Date and time have been set.
¤
. . . use
to select
to select desired day
Switch on/off:
Enter date:
¤
¤
Enter time:
¤
Set name:
¤
Set alarm tone:
¤
Save appointment:
¤
Additional Features
OK
Calendar
OK
. . . use
. . . use
to
OK . . . then
Activation: . . . use
to select On or Off
Date . . . the selected day has been pre-set
enter new date
Time . . . use
to enter hours and minutes of the
appointment
Text . . . use
to enter a description of the appointment
(e.g. evening meal, meeting)
Signal . . . use
to select the melody of the reminder
alarm or deactivate the acoustic signal
Save
51
Gigaset E630A GO / LUG_GO AU en / A31008-M2725-C401-1-7619 / applications_1.fm / 11/8/17
Calendar
If an appointment has already been entered:
enter information for the appointment.
<New Entry>
OK
. . . Then
Notification of appointments/anniversaries
Anniversaries are transferred from the directory and displayed as an appointment. An
appointment/anniversary is displayed in idle status and the selected ringtone plays for
60 seconds as a notification.
• Acknowledge and stop the reminder: Press the display key OFF
• Respond with SMS: Press the display key SMS . . . the SMS menu is displayed
• Permanently modify the ringtone volume: . . . Press the volume keys / during the
reminder
During a call, a reminder is indicated on the handset once with an advisory tone on the
handset.
Displaying missed appointments/anniversaries
The following appointments and anniversaries are saved in the Missed Alarms list:
• The appointment/anniversary call was not acknowledged.
• The appointment/anniversary was notified during a phone call.
• The handset was switched off at the time of the appointment/anniversary.
The last 10 entries are stored. The
icon and the number of new entries are shown in the
display. The most recent entry appears at the top of the list.
Opening the list
¤
Press the Message key
the list of any appointments
Missed Alarms:
OK
. . . use
to browse through
or
Template Go, Version 1, 01.07.2014 / ModuleVersion 1.0
¤
. . . use
to select
Additional Features
OK
Missed Alarms
OK
Each entry is displayed with the number or name, date and time. The most recent entry appears
at the top of the list.
• Delete an appointment/anniversary: Delete
• Compose an SMS: SMS (only if the list has been opened via the menu) . . . the SMS menu
is opened
Displaying/changing/deleting stored appointments
¤
. . . use
use
to select
to select day
Additional Features
OK
OK . . . the appointment list is displayed
Calendar
. . . use
. . . possible options:
Display appointment details:
¤ View . . . The appointment settings are displayed
Change appointment: ¤ View Edit
or Options
Edit entry OK
52
OK
...
to select date
Gigaset E630A GO / LUG_GO AU en / A31008-M2725-C401-1-7619 / applications_1.fm / 11/8/17
Alarm clock
Activate/deactivate appointment:
¤ Options
Delete appointment: ¤ Options
Delete all appointments for a day:
¤ Options
Activate/Deactivate
Delete entry OK
OK
Delete all Appoints.
OK
Yes
Alarm clock
Date and time have been set.
Activating/deactivating the alarm clock and setting the wake-up time
¤
. . . use
to select
Additional Features
OK
Alarm Clock
OK . . .
then
Switch on/off:
¤ Activation: . . . use to select On or Off
Setting the wake-up time:
¤
Time . . . use
to enter hours and minutes
Set days:
¤
Occurrence . . . use
to switch between Monday-Friday
Set the volume:
¤
Set alarm:
Save settings:
¤
¤
and Daily
Volume . . . use
to set volume in 5 levels s or select crescendo (increasing volume)
Melody . . . use
to select a ringtone for the alarm
Save
When the alarm clock is activated, the icon
display.
and the wake-up time are displayed in idle
Template Go, Version 1, 01.07.2014 / ModuleVersion 1.0
Alarm
An alarm is shown on the display and indicated by the selected ringtone melody. The alarm
sounds for 60 seconds. If no key is pressed, the alarm is repeated after 5 minutes. After the
second repetition, the alarm call is deactivated for 24 hours.
During a call, the alarm is only indicated by a short tone.
Switching off /repeating the alarm after an interval (snooze mode)
Deactivate the alarm:
OFF
Repeat the alarm (snooze mode):
repeated after 5 minutes.
Press Snooze or any key . . . the alarm is switched off and
53
Gigaset E630A GO / LUG_GO AU en / A31008-M2725-C401-1-7619 / applications_1.fm / 11/8/17
Baby monitor
Baby monitor
When the baby monitor is switched on, the stored (internal or external) destination number is
called as soon as a defined noise level is exceeded in the vicinity of the handset. The alarm to an
external number is cancelled after approximately 90 seconds.
You can answer the alarm using the Two Way Talk function. This function is used to switch the
loudspeaker of the handset located in the baby's room on or off.
In baby monitor mode, incoming calls are only indicated on the display (without ringtone). The
display backlight is reduced to 50%. Advisory tones are deactivated. All keys are locked, with the
exception of the display keys and the ability to press the centre of the control key.
If you accept an incoming call, the baby monitor mode is suspended for the duration of the call,
but the function remains activated. The baby monitor mode is not deactivated by switching the
handset off and on again.
The handset should be positioned 1 to 2 metres away from the baby. The microphone
must point towards the baby.
Activating the function reduces the operating time of your handset. For that reason,
place the handset in the charging cradle if necessary.
The baby monitor is activated 20 seconds after switching on.
The answer machine for the destination number must be switched off.
After switching on:
¤ Test sensitivity.
¤ Test the connection, if the alarm is being forwarded to an external number.
Activating and setting the baby monitor
¤
. . . use
Template Go, Version 1, 01.07.2014 / ModuleVersion 1.0
Baby Monitor
to select
Additional Features
OK
Baby Monitor activated
OK . . . then
Switch on/off:
¤ Activation: . . . use to select On or Off
Enter destination:
¤
Send alarm to . . . use
to select External or
Internal
External:
Number
. . . use
to select number
or select a number from the directory:
Internal:
Handset Change . . . use
to
select the handset OK
07:15
INT 1
14 Oct
Baby Monitor
0891234567
OFF
Options
Activate/deactivate two-way talk:
¤
Two Way Talk . . . use
to select On or Off
Set microphone sensitivity:
¤
Sensitivity . . . use
to select High or Low
Save settings: Save
The destination number is displayed in idle display when the baby monitor is activated.
54
Gigaset E630A GO / LUG_GO AU en / A31008-M2725-C401-1-7619 / applications_1.fm / 11/8/17
ECO DECT
Deactivate baby monitor / cancel alarm
Deactivate the baby monitor:
Cancel the alarm:
¤
¤
In idle status press the display key OFF
Press the End call key
during an alarm
Deactivate the baby monitor remotely
The alarm is forwarded to an external destination number.
The receiving phone supports tone dialling.
¤
Accept alarm call Press keys
The baby monitor is deactivated and the handset is in idle status. The baby monitor settings
on the handset (e.g. no ringtone) will remain activated until you press the display key OFF.
Reactivate baby monitor with the same number:
Save
. . . Activation to switch back on (
p. 54)
ECO DECT
The device range is set to maximum as default. This guarantees the best connection between
the handset and the base station. In idle status, the handset will not function (as it is not
transmitting). Only the base station will maintain contact with the handset via a low wireless
signal. During a call, the transmission power automatically adapts to the distance between the
base station and handset. The smaller the distance to the base, the lower the radiation.
To reduce the radiation further:
Reducing radiation by up to 80%
¤
. . . use
Template Go, Version 1, 01.07.2014 / ModuleVersion 1.0
Range
to select
Change (
Settings
OK
ECO DECT
OK
Maximum
= off )
The range is also reduced with this setting.
It is not possible to use a repeater to increase the range.
55
Gigaset E630A GO / LUG_GO AU en / A31008-M2725-C401-1-7619 / applications_1.fm / 11/8/17
Protection against unwanted calls
Deactivating radiation in idle status
¤
. . . use
Radiation
to select
Change (
Settings
OK
ECO DECT
OK
No
= on)
To benefit from the advantages of the setting No Radiation, all registered handsets
must support this feature.
If the setting No Radiation is activated and a handset is registered to the base that
does not support this feature, No Radiation is automatically deactivated. As soon as
this handset is de-registered, No Radiation will automatically be re-activated.
The wireless connection will only be established for an incoming or outgoing call and
the connection will be delayed by about 2 seconds.
In order that a handset can establish a wireless connection with the base station more
quickly for an incoming call, it must "listen" to the base station more often, i.e. scan the
environment. This increases power consumption and reduces the standby and talktime of the handset.
When No Radiation is activated, there will be no range display/range alarm on the
handset. Contactability can be tested by attempting to establish a connection.
¤ Press and hold the Talk key
. . . the ringing tone will sound.
Further information can be found at www.gigaset.com.
Protection against unwanted calls
Time control for external calls
Template Go, Version 1, 01.07.2014 / ModuleVersion 1.0
Date and time have been set.
Enter a time period during which the handset should suspend
ringing to indicate external calls e.g. during the night.
¤
. . . use
Settings
OK
Time Control
Switch on/off:
Enter time:
Save:
to select
Settings
OK
Ringtones (Handset)
¤
¤
¤
OK
Example
Time Control
Audio
OK
. . . then
use
to select On or Off
use
to switch between Suspend
ring. from and Suspend ring. until
. . . use
to enter start and end in
4-digit format
Save
For external calls:
On
Suspend ring. from:
22:00
Suspend ring. until:
07:00
Back
Save
The time control only applies to the handset for which the setting is configured.
The telephone will continue to ring for numbers that have been assigned to a VIP
group in the directory.
56
Gigaset E630A GO / LUG_GO AU en / A31008-M2725-C401-1-7619 / applications_1.fm / 11/8/17
Protection against unwanted calls
Protection from anonymous callers
The handset will not ring if callers' numbers are not revealed.
¤
. . . use
to select
Ringtones (Handset)
Settings
OK
OK
Audio Settings
Anon. Calls Silent
Edit (
OK
= on) . . . the call is only
signalled on the display
Black list
When the black list function is activated, calls from black list numbers are not indicated or are
only indicated in the display. These settings apply to all registered handsets.
Displaying/editing the black list
¤
. . . use
Edit
to select
Blocked Numbers
options:
¤
¤
Create an entry:
Delete an entry:
Settings
OK
Telephony
OK
Black List
OK . . . the list of blocked numbers is displayed . . . possible
New . . . use
to enter a number Save
. . . use
to select an entry Delete . . . the entry is deleted
Transferring a number from a call list to the black list
¤
. . . use
Missed calls
to select
OK
. . . use
Call Lists
OK
to select entry
. . . use
to select Accepted calls/
Options
Copy to Blacklist
OK
Setting the protection mode
¤
. . . use
Template Go, Version 1, 01.07.2014 / ModuleVersion 1.0
Edit
to select
Protection Mode
Settings
OK
OK
. . . use
Telephony
OK
Black List
to select desired protection:
No Protection All calls are indicated, including from callers whose numbers are on the
black list.
Silent Call
The telephone will not ring and the incoming call will only appear in the
display.
Block Call
The telephone will not ring and the incoming call will not appear in the
display. The caller will hear the busy tone.
Save settings:
Save
57
Gigaset E630A GO / LUG_GO AU en / A31008-M2725-C401-1-7619 / applications_2.fm / 11/8/17
SMS (text messages)
SMS (text messages)
Calling Line Identification is enabled (
p. 28).
The network provider supports the SMS service.
The call number of at least one SMS service centre has been entered (
p. 62).
If no SMS service centre is entered, the submenu SMS only consists of the entry
Settings.
SMS messages can also be sent and received via VoIP. The lines for sending SMS
messages must be expressly set. It is not possible to receive SMS messages via
Gigaset.net.
Writing and sending SMS messages
An SMS may be up to 612 characters in length. If the number of characters exceeds
160, the SMS is sent as linked SMS messages (up to four individual SMS messages).
¤
The remaining number of characters is shown in the top right corner of the display,
followed by an indication in brackets of which part of a linked SMS is currently being
written. Example: 405(2).
. . . use
Write an SMS:
Send an SMS:
¤
¤
to select
Messaging
or Options
Send
Enter number (Send SMS to):
From the directory:
Template Go, Version 1, 01.07.2014 / ModuleVersion 1.0
or
Send:
OK
New SMS OK
. . . use
Press the End call key
. . . use
SMS
OK . . . then
to enter SMS text
OK
SMS
OK
. . . use
to select number
OK
to enter number directly
If sending SMS messages to an SMS mailbox: add the mailbox ID to the end
of the number.
¤ Send
The number must include the local area code (even if you are in that area).
If an external call comes in, or if you interrupt writing for more than 2 minutes, the text
is automatically saved in the draft message list.
Sending SMS messages may incur additional costs. Please consult your network
provider.
58
Gigaset E630A GO / LUG_GO AU en / A31008-M2725-C401-1-7619 / applications_2.fm / 11/8/17
SMS (text messages)
Sending SMS messages to an e-mail address
The network provider supports this feature.
¤
. . . use
then
Enter address:
to select
¤
. . . use
Messaging
OK
SMS
OK
New SMS
OK . . .
to enter the e-mail address at the start of the SMS message
or
¤
¤
¤
Write text:
Send:
Options
Insert eMail address
. . . use
to select a directory
entry containing an e-mail address OK
. . . use
to complete the SMS message
Options
Send OK
. . . use
to enter the number of the
e-mail service (if not entered)
Send . . . the SMS is sent to the e-mail
service of the SMS send service centre
Sending an SMS as a fax
The network provider supports this feature.
¤
. . . use
OK . . . then
Write text:
Send:
¤
¤
to select
. . . use
Options
Messaging
to enter SMS text
Send OK
directory and use
number
Template Go, Version 1, 01.07.2014 / ModuleVersion 1.0
OK
select SMS
Fax
OK
OK
. . . use
to select a fax number or use
New SMS
to open the
to enter the
Send
Temporary storing of an SMS (draft message list)
You can temporarily store, change later and send SMS messages.
Saving SMS in the draft message list
¤
. . . use
. . . use
to select
to wirte SMS
Messaging
Options
OK
Save
SMS
OK
New SMS
OK
OK
59
Gigaset E630A GO / LUG_GO AU en / A31008-M2725-C401-1-7619 / applications_2.fm / 11/8/17
SMS (text messages)
Opening and editing an SMS from the draft message list
¤
. . . use
. . . use
to select
Messaging
OK
SMS
OK
Draft
OK
to select saved SMS . . . possible options:
¤
¤
¤
¤
¤
Read draft:
Edit:
Send SMS:
Delete an entry:
Delete all entries:
Read
Options
Options
Options
Options
Edit OK
Send OK
Delete entry OK
Delete List OK Yes
Receiving an SMS
Incoming SMS messages are saved in the incoming message list, linked SMS messages are
generally displayed as one SMS.
SMS message list
The incoming SMS message list contains all the received SMS messages and those SMS
messages that could not be sent due to an error.
New SMS messages are indicated on all Gigaset handsets by the
flashing Message key
and an advisory tone.
icon on the display, the
Open the SMS message list
• With the Message key:
Template Go, Version 1, 01.07.2014 / ModuleVersion 1.0
•
. . . the messages list is opened
The messages list shows the number of SMS messages it
SMS:
contains: bold = new messages, not bold = read messages
Open list: . . . use
to select SMS: OK
Via the SMS menu:
. . . use
to select
Messaging
OK
OK
Incoming OK
Every entry in the list contains:
• the number or name of the sender,
• the send/receive connection to which the SMS is addressed,
• arrival date and time.
(2)
SMS
0123727859362922
for Fixed Line
10/02/17 09:07
Functions of the incoming message list
¤
. . . use
to select
Messaging
OK
SMS
OK
. . . possible options:
Call the sender of the SMS:
¤ . . . use to select an SMS Press the Talk key
¤ Options
Delete entry OK
Delete an entry:
Save the number in the directory:
¤ Options
Copy to Directory OK
Delete all entries in the SMS message list:
¤ Options
Delete List OK Yes
60
Incoming
OK
Gigaset E630A GO / LUG_GO AU en / A31008-M2725-C401-1-7619 / applications_2.fm / 11/8/17
SMS (text messages)
Reading and managing SMS messages
¤
. . . use
OK
. . . use
to select
to select SMS
Messaging
OK
SMS
OK
Incoming
Read . . . possible options:
Answer SMS:
¤ Options
Reply OK
Edit SMS text and send to recipient of your choice:
¤ Options
Edit OK . . . use
Forward OK
Forward SMS to recipient of your choice:
¤ Options
Forward OK
Display text in a different character set:
¤ Options
Character Set OK
character set
Select (
to edit text
. . . use
Options
to select
= selected)
Saving numbers from SMS text to the directory
If a telephone number in the SMS text is recognised, it is automatically highlighted.
• Save the number in the directory:
If the number is to also be used to send an SMS, save the number including the local area
code (dialling code).
• Dial a number: Press the Talk key
• Select the next number, if an SMS contains multiple numbers: . . . use
to scroll down
until the first number has disappeared from the display.
The +-icon is not copied for international area codes.
¤ You should then enter "00" at the start of the number.
SMS with vCard
Template Go, Version 1, 01.07.2014 / ModuleVersion 1.0
The vCard is an electronic business card. It is indicated by the
icon in the SMS text. A vCard
can contain a name, home number, work number, mobile number and a birthday. Individual
entries in a vCard can be saved to the directory one after the other.
When reading an SMS containing the vCard:
View
Save
The directory is opened automatically. The number and name are copied. If a birthday is entered
on the vCard, the date is copied to the directory as an anniversary. If necessary, edit the entry in
the directory and save it. You will return to the vCard automatically.
61
Gigaset E630A GO / LUG_GO AU en / A31008-M2725-C401-1-7619 / applications_2.fm / 11/8/17
SMS (text messages)
SMS notification
Receive notifications of missed calls and/or new messages on the answer machine.
¤
. . . use
OK
to select
Notification
Enter number:
¤
Missed calls:
Answer machine:
Save settings:
¤
¤
¤
Messaging
Change (
OK
SMS
OK
Settings
= on) . . . then
To . . . use
to enter the number to which the SMS should be
sent
Missed calls . . . use
to select On or Off
For AM messages . . . use
to select On or Off
Save
Do not enter your own fixed line network number for notification of missed calls. This
can create an endless loop that will incur charges.
SMS notification may incur additional costs.
SMS service centres
The number for at least one SMS service centre must be saved in the device to be able to send
SMS messages. The SMS service centre number can be obtained from the service provider.
SMS messages are received from every entered SMS service centre as long as they are registered
with their service provider.
Your SMS messages are sent via the SMS service centre that is entered as the active send centre.
However, you can activate any other SMS service centre as the active send service centre to send
a current message.
Entering/changing the SMS service centre, setting the send service centre
¤
. . . use
OK
to select
Service Centres
Template Go, Version 1, 01.07.2014 / ModuleVersion 1.0
send service centre)
Messaging
OK
. . . use
OK
SMS
OK
to select SMS service centre (
Settings
= current
Edit . . . then
Activate send service centre:
¤ Active Send: . . . use to select Yes or No (Yes = SMS messages
are sent via the SMS service centre)
For the SMS service centres 2 to 4, the setting only applies to the
next SMS.
Enter the number of the SMS service:
¤
SMS Service Centre Number . . . use
to enter the number
Enter the number of the e-mail service:
¤
eMail Service no. . . . use
to enter the number
Select send connection:
¤
Send via . . . use
to select the fixed line network or VoIP
connection that you want to use to send the SMS messages.
Save settings:
¤ Save
62
Gigaset E630A GO / LUG_GO AU en / A31008-M2725-C401-1-7619 / applications_2.fm / 11/8/17
SMS (text messages)
If you have agreed a flat fixed line network rate, the chargeable numbers with dialling
code 0900 are often blocked. If, in this case, a 0900 number is entered for the SMS
service centre, you will not be able to send text messages from your phone.
If the attempt to send fails, the SMS is saved in the incoming messages list and
indicated as failed. VoIP connection: Even if the Automatic fallback to fixed line
option is activated ( web configurator), the telephone will not attempt to send the
SMS via the fixed line network.
If the selected send connection is deleted from the configuration, the fixed line
network connection is used.
SMS to PABXs
• The Call Line Identification must be forwarded to the extension of the PABX (CLIP).
• If necessary, the access code/outside line code must be prefixed to the number of the SMS
•
service centre (depending on your PABX). To test: Send an SMS to your own number, once
with the access code and once without.
If the SMS is sent without the extension number, it will not be possible for the recipient to
answer directly.
Activating/deactivating first ring muting
Every SMS addressed to your fixed line network connection is indicated by a single ring. If such
a "call" is answered, the SMS is lost. To prevent this, mute the first ring for all external calls. In idle
status:
¤
. . . the current setting flashes in the input field
(e.g. 1) . . . then
Template Go, Version 1, 01.07.2014 / ModuleVersion 1.0
Do not mute the first ringtone:
Mute the first ringtone (default setting):
¤
¤
OK
OK
Activating/deactivating the SMS function
The settings you have entered for sending and receiving SMS messages (e.g. the numbers of the
SMS service centres) and the entries in the incoming and draft lists are saved even after
deactivation.
¤
. . . the current setting flashes in the input field
(e.g. 1) . . . then
Deactivate the SMS function:
Activate the SMS function (default setting):
¤
¤
OK
OK
63
Gigaset E630A GO / LUG_GO AU en / A31008-M2725-C401-1-7619 / applications_2.fm / 11/8/17
SMS (text messages)
SMS status report
If the function is activated, you will receive an SMS with status information from the SMS service
centre for each SMS that has been sent.
¤
. . . use
to select
Status Report
Messaging
Change (
OK
SMS
OK
Settings
OK
= on)
Requesting a status report may incur additional costs.
SMS troubleshooting
E0
Calling Line Identification permanently withheld (CLIR) or Calling Line Identification not
activated.
FE
Error occurred while sending SMS.
FD
Connection to SMS service centre failed, see self-help.
Self-help with errors
You cannot send messages
• You have not requested the CLIP service (Calling Line Identification Presentation).
¤
Ask your network provider to enable the feature.
¤
Re-send the SMS.
¤
Enter the number (
• SMS sending was interrupted (e.g. by a call).
• The network provider does not support this feature.
• No number or an incorrect one has been entered for the send service centre.
p. 62).
Template Go, Version 1, 01.07.2014 / ModuleVersion 1.0
SMS text is incomplete
• The phone's memory is full.
¤
Delete old SMS messages.
• The network provider has not yet sent the rest of the SMS.
You have stopped receiving SMS messages
Call divert has been activated for All calls.
¤ Change call divert ( p. 29).
The SMS is played back
• The "display call number" service is not activated.
¤
Ask the network provider to enable this feature (subject to a fee).
¤
Obtain information from your SMS service provider.
¤
Send an SMS to register the phone for receiving SMS.
• Your mobile phone operator and SMS service provider are not working in partnership.
• The phone is not registered with the SMS service provider.
64
Gigaset E630A GO / LUG_GO AU en / A31008-M2725-C401-1-7619 / email.fm / 11/8/17
E-Mail notifications
E-Mail notifications
The phone periodically connects to the incoming e-mail server and checks for new messages.
An e-mail account is set up with an Internet provider.
The incoming e-mail server uses the POP3 protocol.
The name of the incoming e-mail server and your personal access data (account name,
password) are stored in the phone ( Web configurator).
The receipt of new e-mail messages is displayed on the handset: An advisory tone sounds, the
Message key
flashes and the
icon is displayed in idle status.
The
icon is also displayed when you have new SMS messages.
If authentication of the telephone is carried out by the incoming e-mail server via a
secure connection (TLS authentication) and this fails, the e-mail messages are not
downloaded to the telephone.
Notification when pressing the Message key
: Certificate error - Please check
your certificates in the Web configurator.
¤ Confirm notification using OK . . . On the Security page in the Web configurator,
you will find information on the possible causes and measures.
Opening the incoming e-mail list
¤
. . . use
to select
Messaging
OK
or: There are new e-mail messages (the Message key
press
eMail OK
Template Go, Version 1, 01.07.2014 / ModuleVersion 1.0
¤
eMail
OK
flashes)
The phone establishes a connection to the incoming e-mail server.
A list of e-mail messages that are stored there is displayed.
• New unread messages appear above old read messages.
• The following details are displayed for each e-mail: name or
e-mail address of the sender (on one line, abbreviated if
necessary) and date and time (date and time will only display
correct values if sender and recipient are located in the same
time zone).
• Bold: New message. E-mail messages that were not present in
the incoming e-mail server when the inbox was last opened are
identified as "new", regardless of whether or not they have been
read.
eMail Incoming
Frank.Miller@mailp.com
10/02/2017 15:40
Happy Birthday
Anna Sand
10/02/2017
Read
10:38
Delete
E-mail messages classified as spam by the provider are stored in a separate folder and
are not shown in the incoming e-mail list.
Some e-mail providers allow you to change this setting:
or display spam e-mails in the incoming email list.
Deactivate spam protection
Other e-mail providers may send a message to the inbox when a new spam e-mail is
received. The date and sender of this mail are repeatedly updated, so that it is always
displayed as a new message.
65
Gigaset E630A GO / LUG_GO AU en / A31008-M2725-C401-1-7619 / email.fm / 11/8/17
E-Mail notifications
Messages when establishing a connection
The following problems may occur when connecting to the incoming e-mail server. The
messages are displayed in the display for a few seconds.
Server not accessible
• The connection to the incoming e-mail server could not be established:
• Incorrect entry for the name of the incoming e-mail server.
• Temporary problems with the incoming e-mail server (server is down or is not connected
to the Internet).
¤ Check settings in the Web configurator.
¤ Try again later.
Currently not possible
• The resources your phone requires to make the connection are busy, e.g.:
• The permitted number of VoIP connections has already been reached.
• One of the registered handsets is currently connected to the incoming e-mail server.
¤
Try again later.
Loginfailed
• Error when logging in to the incoming e-mail server.
• Incorrect entries for name of incoming e-mail server, user name and/or password.
¤
Check settings in the Web configurator.
Mailbox settingsincomplete
• Entries for name of incoming e-mail server, user name and/or password are incomplete.
Template Go, Version 1, 01.07.2014 / ModuleVersion 1.0
¤
66
Check/add to settings.
Gigaset E630A GO / LUG_GO AU en / A31008-M2725-C401-1-7619 / email.fm / 11/8/17
E-Mail notifications
Reading e-mails
¤
. . . Use
to select
select an e-mail
Messaging
OK
eMail
OK
. . . Use
The subject of the e-mail (maximum 120 characters) and the first
Example:
few characters of the text (maximum 560 characters) are displayed.
Scroll through the message:
Return to inbox:
to
Read
eMail
Subject:
Back
Invitation
Text:
If the e-mail does not contain any standard text, the
message eMail can’t be displayed will briefly appear.
Hi Anna, I
passed my test!
Back
Options
View sender's address:
¤ Options
From OK . . . The sender's e-mail address is
displayed, over several lines if necessary
(maximum 60 characters).
Example:
Return to inbox:
Anna.Sand@mailp.com
Back
eMail
From:
Template Go, Version 1, 01.07.2014 / ModuleVersion 1.0
Back
Deleting an e-mail
¤
. . . Use
to select
Messaging
an e-mail in the incoming e-mail list
OK
eMail
OK
Options
. . . Use
to select
Delete . . . The e-mail is deleted from the incoming
e-mail server
or
¤
Open message Options
incoming e-mail server
Delete
OK
Yes . . . The e-mail is deleted from the
67
Gigaset E630A GO / LUG_GO AU en / A31008-M2725-C401-1-7619 / Info_Center.fm / 11/8/17
Info Centre
Info Centre
The Info Centre makes information from the Internet (e. g. messages or the weather forecast)
available for display on a Gigaset telephone. These info services are constantly updated. A
default selection has already been defined for the telephone.
Data protection notice
The inventory data corresponds to that of the VoIP service.
When you use the service for the first time, a standard profile is created with configuration data for the
device. You can then change and store the configuration data specific to your device, for example, the city
for the weather forecast or the date of birth for the biorhythm. You can delete this configuration data again
at any time.
The information services use the HTTP protocol.
Further information about the data stored in relation to the Gigaset.net service:
www.gigaset.net/privacy-policy
Information on gigaset.net info services:
www.gigaset.com/nextg/apps
Customising info services
Change the default setting for the Info Centre (standard profile) on the Gigaset.net website
www.gigaset.net:
• Via the Web configurator: Open the page Settings Info Services . . . Click on the link
gigaset.net/myaccount . . . You are automatically logged in with the username and password
that have been assigned to your phone by default.
or
• Via a computer web browser:
Enter the address www.gigaset.net
. . . Enter the user ID
and password on the Gigaset.net website. You can find both on the web configurator page
Settings Info Services.
Template Go, Version 1, 01.07.2014 / ModuleVersion 1.0
The Gigaset.net website is displayed.
"Info Centre" tab
The page has an icon for every info service provided by Gigaset.net (e.g. weather, horoscope),
and an icon for personal applications that you wish to add to your Info Centre.
"Screensaver" tab
Info services for the screensaver Info Services
Activating/deactivating a service
An info service is offered in the Info Centre of the
registered handset if the relevant icon is orange and
the option at the top right of the icon is activated.
Activating/deactivating a service:
(
= activated)
Example:
Click option
active
68
inactive
Gigaset E630A GO / LUG_GO AU en / A31008-M2725-C401-1-7619 / Info_Center.fm / 11/8/17
Info Centre
Customising info services
Customising information for an info service:
¤ Click the icon that belongs to an info service (e. g. weather) . . . This will open another web
page to customise the RSS feeds.
The web pages for the individual info services describe which settings can be made.
Example "Weather information"
¤
Click on the weather information icon . . . A web page for configuring the weather
information for the Info Centre is opened
The world weather is already set. In addition, you can select up to nine further cities (worldwide).
¤ Enter the name of the desired city Click on the magnifying glass icon . . . The cities that
start with the specified name are listed Click the list Select the desired city
¤ Add Info Centre location: Right-click the arrow icon . . . The web page lists all the
locations for which the Info Centre provides weather information.
¤ Remove city from the list: Click on the icon behind the city name
Configuring weather information on handset:
¤
. . . Use
Weather
OK
to select
Additional Features
Add location
OK
. . . Use
Info Centre
to enter location name
OK . . . A list of locations with the specified name is displayed
location
OK
Select
Save
Starting Info Centre, selecting info services
¤
. . . Use
to select
Additional Features
Info Centre
available info services is displayed
. . . Use
to select info service
OK . . . A list of
OK
Template Go, Version 1, 01.07.2014 / ModuleVersion 1.0
To access certain info services (personalised services), you have to log in with a user name and
password.
Messages when loading requested information
The information is loaded from the Internet. If the information for an info service cannot be
displayed, one of the following messages appears:
Requested page can’t be reached.
• Time limit exceeded (timeout) when loading the information or Internet server for the info
services cannot be accessed. Check Internet connection and try again later.
69
Gigaset E630A GO / LUG_GO AU en / A31008-M2725-C401-1-7619 / Info_Center.fm / 11/8/17
Info Centre
Coding error on requested page
• The content of the requested info service is coded in a format that the handset cannot
display.
Can’t display requested page
• General error when loading the info service.
Login failed.
• Registration data has not been correctly entered. Reselect the info service and repeat the
login process. Please remember that data is case sensitive.
• You are not authorised to access this info service.
Logging in for personalised info services
If a special login process with user name and password is required to access an info service:
¤ . . . Use to enter Authent. Name Save . . . Use to enter Password Save . . . If
login was successful, the requested info service is displayed
If login failed, a message to this effect is displayed
information, p. 69.
Messages when loading requested
Pay attention when entering registration data, as it is case sensitive.
Template Go, Version 1, 01.07.2014 / ModuleVersion 1.0
Operating Info Centre
Depending on the requested info service:
• Scroll through an info service: Press the control key
• Return to the previous page: Press the left display key.
• Return to the Info Centre menu: Briefly press the End call key
.
• Go offline: Press and hold the End call key
. . . The handset returns to idle status
• Enter text: . . . Use
to select a line . . . The cursor flashes in the text field
. . . Use
to
enter text . . . Close the entries using the right display key . . . The data is sent
• Make a selection: . . . Use
to select a line in which a selection is possible . . . Use
to make a selection . . . Complete the selection using the left display key . . . The data
is sent
• Set option: . . . use
to select a line that offers the options . . . The line is marked . . . then
Activate/deactivate option:
Complete entry:
70
¤
¤
or press the left display key (e. g. OK)
Press the left display key . . . The data is sent
Gigaset E630A GO / LUG_GO AU en / A31008-M2725-C401-1-7619 / Info_Center.fm / 11/8/17
Info Centre
Hyperlink to further information
A hyperlink to further information is displayed by the
icon.
If a page with hyperlinks is opened, the first hyperlink is highlighted.
¤ Use to select another hyperlink if required Link . . . The corresponding page is opened
Hyperlink to a phone number
A hyperlink to a phone number offers the Call function on the right display key.
Select the phone number (Click-2-Call): Call . . . The number is dialled directly depending on
the provider or it appears first in the display Confirm using Yes if necessary
Copy an entry to the local directory:
. . . Use
to select hyperlink
Accessing info services using quick dial
Every info service available on Gigaset.net is assigned a quick dial. Examples:
Info service
Quick dial
Info service
News
1#92
Horoscope
Quick dial
7#92
Weather
2#92
Biorhythm
8#92
9#92
My eBay
3#92
My Friends
Encyclopaedia
4#92
Translator
5#92
My Applications
99#92
(personal info services/applications
that you have defined)
Unit Converter
6#92
The list of info services is one example. Each info service is provider-dependent.
The numbers 11 to 98 are reserved for info services/applications that are provided via
Gigaset.net.
Template Go, Version 1, 01.07.2014 / ModuleVersion 1.0
Open up a service:
. . . Use
to enter the quick dial for a service Press the Talk key
. . . The Info Centre page with this service/this application is loaded and displayed
Open up an info service using digit key: Enter the quick dial for an info service in the
directory Assign directory entry to a digit key on the handset Press and hold the
digit key
71
Gigaset E630A GO / LUG_GO AU en / A31008-M2725-C401-1-7619 / Info_Center.fm / 11/8/17
Info Centre
Displaying information from the Internet as a screensaver
The Info Services screensaver is activated on the handset.
The info services display is activated via the Web configurator.
Info services appear on the display approximately ten seconds after the handset returns to idle
status. Depending on the information feed selected, a display key appears on the right of the
screensaver.
To open further information:
To revert to idle status:
Press the right display key.
Press and hold the End call key
Selecting information for the screensaver
The default setting for the screensaver Info Services is the weather forecast.
Changing default setting:
• On the PC using your account on the Gigaset.net server (
• On the handset using the Info Centre
¤
. . . Use
to select
Additional Features
Screensaver
OK
. . . Use
Template Go, Version 1, 01.07.2014 / ModuleVersion 1.0
Info Centre
to select the info service
settings for the selected info service if required
72
p. 68)
Save
OK
Enter additional
Gigaset E630A GO / LUG_GO AU en / A31008-M2725-C401-1-7619 / extending.fm / 11/8/17
Multiple handsets
Expanding the functionality of the telephone
Multiple handsets
Up to six handsets can be registered to the base station.
Each registered device is assigned an internal number (1-6) and an internal name (INT 1 – INT 6).
The number or name assigned can be changed.
If all internal numbers have already been assigned at the base station:
that is no longer needed
de-register a handset
When a Gigaset handset is registered, the base station transfers entries for the
following online directories to the local directory on the handset to enable the online
directories to be used on the new handset as well.
• The currently set online directory with a provider-specific name (e. g. kT Phonebook).
• The currently set classified directory with a provider-specific name (e. g. kT
Y.Pages).
• The Gigaset.net directory with the name Gigaset.net.
Successful registration is acknowledged with the message Data Transfer x entries
received.
Registering the handset
A handset can be registered on up to four base stations.
Registration must be initiated on the base station and on the handset.
Both must be carried out within 60 secs.
Template Go, Version 1, 01.07.2014 / ModuleVersion 1.0
On the base station
¤
Press and hold the Registration/Paging key on the base station (approx. 3 secs) . . . the
paging key flashes when the base station is in registration mode.
On the handset
¤
. . . use
Handset
OK
to select
. . . use
Settings
OK
Registration
OK
Register
to select the base station (if the handset has already been
registered to four base stations)
system PIN (default setting: 0000)
OK . . . an available base station is sought
. . . Enter
OK
Once registration is complete, the handset returns to idle status. The internal number of the
handset appears in the display, e. g. INT 1. If not, repeat the procedure.
73
Gigaset E630A GO / LUG_GO AU en / A31008-M2725-C401-1-7619 / extending.fm / 11/8/17
Multiple handsets
Maximum possible number of handsets registered to the base station (all internal
numbers assigned): The handset with the highest internal number is replaced by the
new one. If this is not possible, because a conversation is being held on this handset,
for example, the message No available internal number is given. De-register a
handset that is no longer required and repeat the registration procedure.
All base station connections are assigned to a handset as receive connections as soon
as registration is complete. The fixed line connection is assigned as the send
connection. Change assignment
p. 91.
Registering a handset to multiple base stations
Your handset can be registered to up to four base stations. The active base station is the base
station to which the handset was last registered. The other base stations remain saved in the list
of available base stations.
¤
. . . use
to select
Settings
OK
Registration
OK
Select Base
OK . . . possible options:
Change active base station:
¤ . . . use
(
or Best Base to select base station
Select
= select)
Best Base: The handset chooses the base station with the best
reception as soon as it loses connection to the current base station.
Change name of a base station:
¤ . . . use to select a base station Select ( = selected)
Name
change name
De-registering the handset
¤
. . . use
to select
Settings
Template Go, Version 1, 01.07.2014 / ModuleVersion 1.0
Handset
Save
OK
Registration
OK . . . the handset being used is selected
handset if desired
OK . . . enter system PIN if desired
. . . use
OK
OK
De-register
to select a different
. . . Confirm de-registration
with Yes
If the handset is still registered to other bases, it switches to the base with the best reception
(Best Base).
74
Gigaset E630A GO / LUG_GO AU en / A31008-M2725-C401-1-7619 / extending.fm / 11/8/17
Repeater
Locating a handset (Paging), finding the telephone's IP address
¤ Briefly press the Registration/paging key on the base station.
All handsets will ring at the same time ("paging"), even if ringtones
are switched off. Exception: handsets on which the baby monitor is
activated.
The current (local) IP address for the base station appears in the
handset displays.
Paging
Ending the search
¤
IP: 192.168.1.2
Briefly press the registration/paging key on the base station
or
Press the End call key
or
Press the display key Silence on the handset
on the handset
or
No action. After approx. 30 seconds, the paging call will end automatically.
Silence
Changing the handset name and internal number
When registering multiple handsets, they will automatically be assigned the names "INT 1", "INT
2" etc. Each handset will automatically be assigned the lowest unassigned internal number. The
internal number is shown as the name of the handset on the display e.g. INT 2. You can change
the names and the numbers of handsets. The name must not exceed 10 characters in length.
¤
. . . the list of handsets is opened, the current handset is highlighted with <
. . . use
to select a handset . . . possible options:
Edit name:
Edit number:
¤
Options
¤
name . . . use
to enter a new name OK
Options
Edit Handset No. OK . . . use
Template Go, Version 1, 01.07.2014 / ModuleVersion 1.0
number
Rename
OK
. . . use
to delete the current
to select a
Save
Repeater
A repeater increases the receiving range between the Gigaset handset and the base station.
The registration procedure for a repeater depends on the version of the repeater being used.
• Repeater without encryption, e.g. Gigaset repeater prior to Version 2.0
• Repeater with encryption, e.g. Gigaset repeater later than Version 2.0
Further information about the Gigaset repeater can be found in the repeater user guide and at
www.gigaset.com.
Repeater without encryption
Activate Maximum Range/deactivate No Radiation
¤
. . . use
Range
to select
Change (
= on)
Settings
OK
No Radiation
ECO DECT
Change (
OK
Maximum
= off )
75
Gigaset E630A GO / LUG_GO AU en / A31008-M2725-C401-1-7619 / extending.fm / 11/8/17
Operation with a PABX
Deactivate encryption
¤
. . . use
Change (
to select
Settings
OK
System
OK
Encryption
= deactivated)
Registering a repeater
¤
Connect the repeater to the mains power supply Press and hold the Registration/paging
key on the telephone base station (min. 3 secs) . . . the repeater is automatically registered
It is possible to register more than one Gigaset repeater.
Repeater with encryption
Encryption is activated (default setting).
Registering a repeater
¤
Connect the repeater to the mains power supply Press and hold the Registration/paging
key on the telephone base station (min. 3 secs) . . . the repeater is automatically registered
Up to 2 repeaters may be registered.
The ECO DECT function Maximum Range is activated and the No Radiation function is
deactivated. The settings cannot be changed whilst the repeater is registered.
As soon as a repeater is registered, it will appear in the repeater list under
Settings
System
Repeater
De-registering a repeater
¤
. . . use
OK
. . . use
to select
Settings
to select repeater
OK
De-reg.
System
OK
Repeater
Yes
Template Go, Version 1, 01.07.2014 / ModuleVersion 1.0
Operation with a PABX
To find out which settings are required for a PABX, please refer to the PABX user guide.
You cannot send or receive SMS messages on PABXs that do not support Calling Line
Identification.
Setting the flash time
¤
. . . use
to select
Settings
. . . possible flash times are listed
76
. . . use
OK
Telephony
to select flash time
OK
Select (
Recall
OK
= selected)
Gigaset E630A GO / LUG_GO AU en / A31008-M2725-C401-1-7619 / extending.fm / 11/8/17
Operation with a PABX
Saving an access code (outside line code)
Setting the access code (e.g. "0") for dialling using the fixed line network and using VoIP.
¤
. . . use
Code
OK
Fixed line
network:
VoIP:
¤
¤
Rule:
¤
Save:
¤
to select
Settings
OK
Telephony
OK
Access
. . . then
Access external line with: . . . use
to enter or change access code,
max. 3 digits
Access external line with: . . . use
to enter or change access code,
max. 4 digits.
For . . . use
to select when the access code should be dialled
Call Lists: The access code will only prefix numbers from a list (list of answered
calls, list of missed calls, SMS list, answer machine list).
All calls: The access code prefixes all numbers dialled.
Off: The access code is deactivated and does not prefix any telephone
number.
Save
The access code never prefixes any emergency numbers or SMS service centre
numbers.
The access code never prefixes any SMS service centre numbers.
Setting pauses
¤
. . . then
Pause after line seizure:
1 sec
3 secs
Pause after Recall key:
7 secs
800 ms
Template Go, Version 1, 01.07.2014 / ModuleVersion 1.0
1600 ms
3200 ms
Dialling pause (pause after access code): 1 sec
2 secs
3 secs
6 secs
¤
¤
¤
¤
¤
¤
¤
¤
¤
¤
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
To enter dialling pause when dialling:
¤ Press and hold the hash key
. . . a P appears in the display.
77
Gigaset E630A GO / LUG_GO AU en / A31008-M2725-C401-1-7619 / settings_HS_GO.fm / 11/8/17
Handset
Adjusting the telephone settings
Handset
Changing the language
¤
. . . use
to select
Settings
select language
Select (
OK
Language
OK
. . . use
to
= selected)
If the handset has been set to an incomprehensible language:
¤
Press the keys
language
slowly one after the other
. . . use
to select the correct
press the right display key
Display
Screensaver
A digital or analogue clock, Info Services and a range of pictures can be selected to be displayed
as a screensaver when in idle status.
¤
. . . use
Template Go, Version 1, 01.07.2014 / ModuleVersion 1.0
Edit (
to select
Settings
OK
Display
OK
Screensaver
= on) . . . then
Switch on/off:
Select screensaver:
¤
¤
Activation: . . . use
to select On or Off
Selection . . . use
to select a screensaver
View screensaver:
Save selection:
¤
¤
(Digital Clock / Analog Clock / Info Services /<Pictures>)
View
Save
The screensaver is activated approx. 10 seconds after the display has changed to idle status.
End screensaver
¤
Briefly press the End call key
. . . the idle display appears
Display of info services as screensaver
Info Services are activated via the web configurator.
The telephone is connected to the Internet.
Example: Enable weather service as screensaver
Enable info services as screensaver:
¤
. . . use
to select
Settings
Edit
. . . use
Info Services
78
to select Activation: On
Save
OK
Display
Selection
OK
Screensaver
. . . select as screensaver with
Gigaset E630A GO / LUG_GO AU en / A31008-M2725-C401-1-7619 / settings_HS_GO.fm / 11/8/17
Handset
Select locations:
¤
. . . use
OK
to select
Add locations
Additional Features
OK
Info Centre
. . . specify location names with
locations with this name is displayed
Weather
OK . . . a list of
select location with
OK
Save
Multiple locations can be entered. Once you have entered all locations required:
<– to go back
. . . Use
Enable screensaver:
¤
. . . use
Screensaver
to select
OK
Additional Features
Weather
OK
Info Centre
. . . select location with
Save
The type of info service available to your phone is set on the Internet on the
p. 68.
Gigaset.net server. Changing the setting
If no information is currently available, the digital time (Digital Clock) is displayed
instead until information is available again.
Switching Info Services on/off
The text information from the Internet that is set for the screensaver Info Services can be
displayed as a scrolling message in the idle display.
¤
. . . use
Info Ticker
to select
Edit (
Settings
OK
Display
OK
= on)
The text appears as soon as the telephone changes to idle status. If a message is shown in the
idle display, the info text is not displayed.
Colour scheme
You can choose from a range of colour combinations for the display.
¤
. . . use
Template Go, Version 1, 01.07.2014 / ModuleVersion 1.0
Schemes
OK
to select
. . . use
Settings
OK
Display
OK
to select the required colour scheme
Colour
Select (
= selected)
Display backlight
The display backlight always illuminates when the handset is taken out of the base station/
charging cradle or when a key is pressed. Any digit keys that are pressed appear on the display
for pre-dialling.
Switch the display backlight on/off when in idle status:
¤
. . . use
to select
Settings
OK
Display
OK
Backlight
OK . . . then
Backlight when in the charging cradle:
¤ In Charger: . . . use
Backlight when not in the charging cradle:
¤
Out of Charger
Save selection:
¤ Save
to select On or Off
. . . use
to select On or Off
79
Gigaset E630A GO / LUG_GO AU en / A31008-M2725-C401-1-7619 / settings_HS_GO.fm / 11/8/17
Handset
The handset's standby time may be significantly reduced if the display backlight is
switched on.
Activating/deactivating Auto Answer
When set to Auto Answer, the handset accepts an incoming call as soon as it is removed from the
charging cradle.
¤
. . . use
Change (
to select
Settings
OK
Telephony
OK
Auto Answer
= on)
Regardless of the Auto Answer setting, the connection ends as soon as you place the handset
back in the charging cradle. Exception: Press and hold the handsfree key
for a further
2 seconds while placing the handset in the charging cradle.
Activating/deactivating visual call signal
Visual indication of incoming calls via the spot LED (e.g. in noisy environments).
¤
. . . use
Signal
to select
Change (
Settings
OK
Telephony
OK
LED Call
= on)
Changes are only saved permanently in Profile Personal.
Changing the earpiece and handsfree volume
You can set the volume of the earpiece and speaker at 5 levels independently of each other.
Template Go, Version 1, 01.07.2014 / ModuleVersion 1.0
Changes are only saved permanently in Profile Personal.
During a conversation
¤
Press the volume keys
/
on the right side of the handset
or
¤
Handset Volume
. . . use
to select volume
Save . . . the setting is saved
Without saving, the setting is automatically saved after around 3 seconds.
In idle status
¤
. . . use
Volume
For the earpiece:
For the speaker:
Save settings:
80
to select
OK . . . then
¤
¤
¤
Settings
OK
Audio Settings
OK
Earpiece: . . . use
to set the volume
Speaker
. . . use
to set the volume
Save
Handset
Gigaset E630A GO / LUG_GO AU en / A31008-M2725-C401-1-7619 / settings_HS_GO.fm / 11/8/17
Handset
Earpiece and handsfree profile
Select a profile for the earpiece and handsfree mode in order to adapt the telephone as much
as possible to the surroundings. Check which is the most comfortable profile for you and your
caller.
¤
. . . use
to select
Acoustic Profiles
select profile
Settings
OK
Audio Settings
Earpiece Profiles / Handsfree Profiles
Select (
OK
OK
. . . use
to
= selected)
Earpiece Profiles: High or Low (default setting)
Handsfree Profiles: Profile 1 (default setting) or Profile 2
Ringtones
Ringtone volume
Volume can be set at 5 levels or crescendo (increasing volume).
¤
. . . use
Settings
OK
Volume
OK
to select
Settings
Ringtones (Handset)
. . . use
OK
Audio
Example
OK
Volume
to select For internal calls and
alarms or External Calls
. . . use
For internal calls
and alarms:
<
External Calls:
to set the volume
Save
Template Go, Version 1, 01.07.2014 / ModuleVersion 1.0
Back
>
Save
When the telephone rings, you can permanently change the ringtone volume using
the volume keys
(louder) or
(quieter).
Changes are only saved permanently in Profile Personal.
Ringtone melody
Set different ringtones for internal and external calls for every available receive connection of
the telephone (Landline, IP1- 6, Gigaset.net) or set the same ringtone for All calls.
¤
. . . use
to select
Ringtones (Handset)
connection
. . . use
Settings
OK
OK
Melodies
Audio Settings
OK
. . . use
to select the ringtone/melody in each case
OK
to select the
Save
81
Gigaset E630A GO / LUG_GO AU en / A31008-M2725-C401-1-7619 / settings_HS_GO.fm / 11/8/17
Handset
Switching the ringtone on/off
Switching the ringtone off permanently
¤
Use the
key to set Profile Silent . . . the following icon appears in the status bar
Switching the ringtone on permanently
¤
Use the
key to set Profile Loud or Profile Personal
Switching the ringtone off for the current call
¤
Press Silence or the End call key
Switching the alert tone (beep) on/off
Switch on an alert tone (beep) instead of the ringtone:
¤ . . . Press the Profile key
to select Profile Silent
press Beep within 3 seconds . . . the
following icon appears in the status bar
Switching off the alert tone:
. . . Press the Profile key
to change profile
Switching the silent alert on/off
Incoming calls and other messages are indicated by a silent alert.
¤
. . . use
Alert
Change (
to select
Settings
OK
Audio Settings
OK
Silent
= on)
Changes are only saved permanently in Profile Personal.
Template Go, Version 1, 01.07.2014 / ModuleVersion 1.0
Switching advisory tones on/off
The handset notifies acoustically about different activities and statuses. These advisory tones
can be switched on/off independently of each other.
¤
. . . use
Tones
to select
Settings
OK
Audio Settings
OK
Advisory
OK . . . then
Tone when keys are pressed:
¤ Key Tones: . . . use to select On or Off
Confirmation/error tone after making entries, advisory tone when a new message has been
received:
¤
Confirmation . . . use
to select On or Off
Warning tone when there are fewer than 10 minutes of talktime remaining
(every 60 seconds):
¤
Battery . . . use
to select On or Off
Warning tone when the handset is moved out of range of the base station:
¤
Out of Range: . . . use
to select On or Off
Save settings: ¤ Save
82
Gigaset E630A GO / LUG_GO AU en / A31008-M2725-C401-1-7619 / settings_HS_GO.fm / 11/8/17
Handset
There is no battery warning when the baby monitor is switched on.
Fast access to numbers and functions
Number keys: It is possible to assign a number from the directory to the keys
to
.
Display keys: The left and right display keys have a function preset by default, but the
keys can be re-assigned.
You can then dial the number or start the function by simply pressing a key.
Assigning a number to digit keys (quick dial)
A number has not been assigned to the digit key.
¤
Press and hold the digit key
or
¤
Briefly press the digit key
Press the display key QuickDial
The directory opens.
. . . use
to select an entry OK
the entry is saved to the digit key
¤
. . . use
to select a number if necessary
OK . . .
If the entry in the directory is deleted later, this will not affect the assignment of the
digit key.
Dialling a number
¤
Press and hold the digit key . . . the number is dialled immediately
Template Go, Version 1, 01.07.2014 / ModuleVersion 1.0
or
¤
Briefly press the digit key . . . the number/name (possibly in abbreviated form) is shown on
the left display key . . . press the display key . . . the number is dialled
Changing the digit key assignment
¤
Briefly press the digit key
Change . . . the directory is opened . . . possible options:
Change the assignment:
¤
Delete the assignment:
¤
. . . use
to select an entry
required OK
Clear Key
OK
. . . select a number if
83
Gigaset E630A GO / LUG_GO AU en / A31008-M2725-C401-1-7619 / settings_HS_GO.fm / 11/8/17
Handset
Assigning display keys, changing assignments
¤
Press and hold the left or right display key in idle status . . . the list of possible key
assignments is opened . . . use
to select function OK . . . possible options:
Baby Monitor
Set and activate/deactivate baby monitor
Alarm Clock
Set and activate/deactivate the alarm clock
Calendar
Open calendar
One Touch Call
Set up one touch call
Redial
Show redial list
Spot LED
LED light (torch function) on/off
eMail
Open the e-mail submenu for receiving and reading e-mail
notifications
More Functions...
¤
Send Connections
Set send connection for the next call
Line Selection
Open the connection selection menu
Call Lists
Show call list
Call Divert
Activate/deactivate Call Divert
eMail
Open the e-mail submenu for receiving and reading e-mail
notifications
Info Centre
Start the Info Centre and open the list of available Info Services –
go online.
Net Directories
Display the list of network directories
OK
. . . use
to select other function
Starting a function
Template Go, Version 1, 01.07.2014 / ModuleVersion 1.0
With the telephone in idle status:
Briefly press . . . the assigned function is executed
Handset update
The handset supports firmware updating via the DECT radio link to the base/router
(SUOTA = Software Update Over The Air).
If new firmware is available for the handset a message to this effect will be displayed.
Start the firmware update with Yes.
¤
Start the firmware update manually:
¤
. . . use
Update
OK
to select
Update
Settings
OK
OK
System
OK
Handset
OK . . . if there is new firmware, the update will start
The update process may take up to 30 minutes. During this time, only restricted
handset use is available.
84
Gigaset E630A GO / LUG_GO AU en / A31008-M2725-C401-1-7619 / settings_HS_GO.fm / 11/8/17
Handset
Resetting the handset to the default settings
Reset any individual settings and changes that you have made.
¤
. . . use
Reset
OK
to select
Settings
OK
System
OK
Handset
Yes . . . the handset's settings are reset
Template Go, Version 1, 01.07.2014 / ModuleVersion 1.0
The following settings are not affected by a reset
• Registration of the handset to the base station
• Date and time
• Directory entries and call lists
• SMS lists
85
Gigaset E630A GO / LUG_GO AU en / A31008-M2725-C401-1-7619 / settings_BS.fm / 11/8/17
System
System
The following settings can be set via the menu on a registered handset or using the web
configurator of the telephone/router.
Setting the date and time manually
To ensure you have the correct time for incoming calls and to use the alarm clock and calendar,
for example, the date and time must be set.
The address of a time server in the Internet is stored in the phone. The date and time
are taken from this time server provided the phone is connected to the Internet and
synchronisation with the time server is activated. Manual settings are overwritten in
this case.
If the date and time have not yet been set on the handset, the display key Time appears.
¤ Press the display key Time
or
¤
. . . use
Set the date:
Set the time:
Save settings:
¤
¤
¤
to select
Settings
OK
Date/Time
OK . . . then
Date: . . . use
to enter the day, month and year in 8-digit format
Time . . . use
to enter hours and minutes in 4-digit format
Save
Own area code
Your area code (international and local area code) must be saved on the phone before you can
transfer phone numbers (e.g. in vCards).
Some of these numbers are already preset.
¤
. . . use
Template Go, Version 1, 01.07.2014 / ModuleVersion 1.0
Telephony
to select
OK
Settings
Area Codes
Example
OK
OK
Area Codes
Check
International code:
(pre-)set area code
00 - 49
Edit the number:
¤ . . . use to select/switch entry field
change entry position
use
to enter digit
Local area code:
0 - [8
. . . use
]
to
. . . delete digit if desired
...
Save
Save
86
Gigaset E630A GO / LUG_GO AU en / A31008-M2725-C401-1-7619 / settings_BS.fm / 11/8/17
System
Activating/deactivating music on hold
¤
. . . use
to select
Settings OK
Audio Settings
on hold
Change (
OK
Music
= on)
Setting the IP address of the base station in LAN
Your base station is connected to a router or a PC.
An IP address is required in order for the LAN to "recognise" your phone. The IP address can be
assigned to the phone automatically (by the router) or manually.
• If the address is assigned dynamically the router's DHCP server automatically assigns an IP
address to the phone. The IP address can be changed according to router settings.
• In the case of manual/static assignment, you assign a static IP address to the phone. This may
be necessary depending on your network configuration (e.g. if your phone is connected
directly to a PC).
To assign the IP address dynamically, the DHCP server on the router must be activated.
Please also read the user guide for your router.
¤
. . . use
Template Go, Version 1, 01.07.2014 / ModuleVersion 1.0
Network
OK
to select
. . . use
OK . . . then
Address type:
¤
IP address:
¤
Subnet mask:
¤
Standard-Gateway:
¤
DNS-Server:
¤
Settings
OK
System
OK
Local
to enter the system PIN (if the system PIN differs from 0000)
IP Address Type: . . . use
to select Static or Dynamic
With IP Address Type Dynamic: The following fields show the
current settings that the phone obtained from the router. These
settings cannot be changed.
With IP Address Type Static: Enter settings for the following
fields.
IP Address . . . use
to enter the IP address (overwrite
current setting)
Subnet Mask . . . use
to enter the subnet mask (overwrite current setting)
Default Gateway . . . use
to enter the IP address of the
standard gateway
The local network is connected to the Internet via the standard
gateway. This is generally your router.
DNS Server . . . use
to enter the IP address of the
preferred DNS server
The DNS server (Domain Name System) converts the symbolic
name of a server (DNS name) into the public IP address for the
server when the connection is made. You can specify your router's
IP address here. The router forwards phone address requests to its
DNS server.
87
Gigaset E630A GO / LUG_GO AU en / A31008-M2725-C401-1-7619 / settings_BS.fm / 11/8/17
System
¤
Save:
Save
It is also possible to make the settings via the Web configurator.
Display current IP address:
Press the Paging key on the base station
Updating the phone firmware
The firmware update is downloaded directly from the Internet by default. The relevant web page
is preconfigured in your phone.
The phone is connected to the Internet (i.e. connected to a router).
The phone is in idle status i.e. no calls are being made, there is no internal connection
between registered handsets and the menu is not open on any handset.
Starting the firmware update manually
¤
. . . use
. . . use
to select
Settings
to enter the system PIN
tion to the configuration server
OK
System
Base Update
OK
OK . . . the telephone establishes an Internet connecYes
The firmware update can take up to 6 minutes, depending on the quality of your DSL
connection.
When updating from the Internet, checks are made to ensure that no newer version of
the firmware exists. If this is not the case, the operation is terminated and a message is
issued to that effect.
Updating firmware automatically
Template Go, Version 1, 01.07.2014 / ModuleVersion 1.0
The phone will check daily whether a newer firmware version is available on the Internet
configuration server. If so, the message New firmware available is displayed on the handset.
¤ Confirm prompt with Yes . . . the firmware is downloaded to the telephone
If the telephone is not connected to the Internet at the time when the check for new
firmware is due to be performed (e.g. because the router is deactivated), the check is
performed as soon as the phone is reconnected to the Internet.
You can deactivate the automatic version check via the Web configurator.
Checking the base station's MAC address
Depending on the network configuration, you may require the MAC address of the base station,
e.g. in order to enter it in the router's access control list.
Check the MAC address on the handset:
MAC address is displayed
Return to idle status:
88
Back
. . . the
Gigaset E630A GO / LUG_GO AU en / A31008-M2725-C401-1-7619 / settings_BS.fm / 11/8/17
System
Changing the system PIN
Secure the telephone's system settings with a system PIN. You have to enter the system PIN
when you register or de-register a handset, change local network settings, perform a firmware
update or reset the phone to default settings.
Change the telephone's 4-digit system PIN (default setting: 0000):
¤
. . . use
OK
. . . use
new system PIN
to select
Settings
OK
System
to enter the current PIN (if other than 0000)
OK
OK
System PIN
. . . use
to enter
Save
Resetting system PIN
Resetting the base station to the original PIN 0000:
¤ Unplug the network cable from the base station Press and hold the Registration/Paging
key on the base station At the same time reconnect the network cable to the base
station Press and hold the key for at least 5 secs . . . the base station is reset and the system
PIN is set to 0000
All handsets are de-registered and must be re-registered. All settings are returned to
default settings.
Restarting the base station
¤
. . . use
to select
Settings
OK
System
OK
Base Restart
OK . . . the base station is restarted, the connection to the handset is briefly interrupted
Template Go, Version 1, 01.07.2014 / ModuleVersion 1.0
Restoring the phone to default settings
When the settings are reset
• the date and time are retained,
• handsets are still registered,
• the system PIN is retained,
• Maximum Range is activated and No Radiation is deactivated.
¤
. . . use
OK
. . . use
to select
Settings
to enter system PIN
OK
OK
System
OK
Base Reset
Yes . . . the base station is restarted. The restart
takes around 10 seconds.
89
Gigaset E630A GO / LUG_GO AU en / A31008-M2725-C401-1-7619 / settings_VoIP.fm / 11/8/17
Internet telephony (VoIP)
Internet telephony (VoIP)
Setting up an IP account
To make calls over the Internet, you need an IP account from a provider. You can configure up to
six IP accounts.
To set up an IP account, you will need access data from your provider.
Enter access data on the phone:
• Using the VoIP wizard for initial installation (
see Set-up)
or
• Using the web configurator on a PC/tablet:
¤
Quick Start Wizard (
see Web configurator)
Setting up further IP accounts
• Using the web configurator on a PC/tablet:
Page
Settings
Telephony
Connections (
see Web configurator)
or
• Using the VoIP wizard on the handset:
¤
. . . Use
to select
Settings OK
ard
The process is the same as for the installation wizard (
Telephony
OK
VoIP Wiz-
see Set-up).
Gigaset.net
Template Go, Version 1, 01.07.2014 / ModuleVersion 1.0
Gigaset.net is a VoIP service offered by Gigaset Communications GmbH. All users of a Gigaset
VoIP device can make calls over the Internet directly and free of charge to other Gigaset.net
users – without setting up an account with a phone provider (provider) and without making any
further settings. Connections to/from other networks are not possible.
Gigaset.net is a voluntary service provided by Gigaset Communications GmbH
without guarantee or liability for the availability of the network and service provision.
If you do not use your Gigaset.net connection for six months, it is automatically
disabled.
Re-activating your connection:
¤ Start search in Gigaset.net directory
¤ Make a call via Gigaset.net (dial a number with #9 at the end)
¤ Activate the connection via the web configurator.
90
Gigaset E630A GO / LUG_GO AU en / A31008-M2725-C401-1-7619 / settings_VoIP.fm / 11/8/17
Internet telephony (VoIP)
Register with Gigaset.net
Every Gigaset IP device is assigned a Gigaset.net phone number by default. When you open the
Gigaset.net directory for the first time, you are asked to enter a name for your connection.
¤
Press and hold . . . the list of online directories is
Own Details
opened
Gigaset.net OK . . . the Gigaset.net directory
is opened
. . . use
to enter nickname
(max. 25 characters)
Save . . . the name is assigned to the
phone number and recorded in the Gigaset.net directory
Your Gigaset.net
nickname:
Gi
You can also enter/change the Gigaset.net name via
the web configurator:
¤
Settings
Telephony
Connections
abc
<C
Save
Data protection notice
The nickname is saved on a central Gigaset server. The nickname appears in the Gigaset.net directory and
other users of the Gigaset.net service can call you using this name.
By entering your information, you agree for this data to be saved.
If you do not wish this to happen, you can cancel the operation at this point:
• Cancel without leaving the Gigaset.net directory: Do not enter a name Save . . . You can use the
directory to search for other Gigaset.net participants and call them, but no nickname will be recorded.
• Leave Gigaset.net directory without search: Press and hold the End call key
Further information about the data stored in relation to the Gigaset.net service can be found at
www.gigaset.net/privacy-policy
Template Go, Version 1, 01.07.2014 / ModuleVersion 1.0
Assign send and receive connections
If multiple connections are configured for the phone (fixed line network, Gigaset.net and IP), you
must specify
• Which connection is used for an outgoing call (send connection)
• To which internal participant a call is to be diverted from a certain connection (receive
connection)
Internal participants are the registered handsets and the three base answer machines.
Each connection (number) of your phone can be both a send as well as a receive connection.
Multiple internal participants can be assigned to each connection as send and/or receive
connections. It may only be assigned to one answer machine as a receive connection.
Default assignment
• All configured connections are assigned to the handsets and answer machine 1 as receive
connections on delivery.
• The fixed line network connection is assigned to the handsets as a send connection. If you
have no fixed line network connection, no send connection is assigned.
91
Gigaset E630A GO / LUG_GO AU en / A31008-M2725-C401-1-7619 / settings_VoIP.fm / 11/8/17
Internet telephony (VoIP)
Change default assignment
• Using the installation wizard for initial installation ( see Set-up)
or
• Using the web configurator on a PC: Page
(
Settings
Telephony
Number Assignment
see Web configurator)
or
• Via the handset menu
¤
. . . Use
to select
Settings OK
Connections/Rec. Connections OK
The process is the same as for the installation wizard (
Telephony
OK
Send
see Set-up).
Internet call settings in web configurator
Register with web configurator (
see Web configurator)
• When making fixed line network calls, you must always dial the area code, even for local calls
•
Template Go, Version 1, 01.07.2014 / ModuleVersion 1.0
•
•
92
(depending on your provider):
¤ Settings Management Local Settings activate Use Area Code Numbers for Calls
via VoIP option
Establish a connection automatically via the fixed line network if a call attempt via an
IP connection fails:
¤ Settings Telephony Number Assignment . . . in Alternative Connection activate
the Automatic fallback to fixed line option if a fixed line connection is available
Define a dialling plan:
¤ Settings Telephony Dialling Plans
If a dialling plan has been defined for the dialled number, then the connection specified in
the dialling plan will be used instead of the send connection. If the number is blocked by a
dialling plan, Not possible is displayed.
Further settings: DTMF signalling, call transfer, assignment of the Recall key, communication
ports
¤ Settings Telephony Advanced VoIP Settings
Gigaset E630A GO / LUG_GO AU en / A31008-M2725-C401-1-7619 / settings_web-conf.fm / 11/8/17
Web configurator
Web configurator
You can use the web configurator to make settings for the phone on a PC or tablet.
• You can make settings that can also be made on your phone handset, e. g. set date and time
or perform a firmware update
• You can make additional settings that are not possible via the handset, meet particular
prerequisites for connecting the phone to a company network or adjust the voice quality on
IP connections
• You can save data on the base where this is required for access to certain Internet services,
e. g. public online directories, the incoming e-mail server for your e-mail account and the
synchronisation of the date/time with a time server
• You can connect the phone to the Gigaset cloud in order to receive call notifications on your
smartphone
• You can save data for your phone (base and handsets) in files on the PC and, in the event of
an error, you can download them onto your phone again.
See the online help for the web configurator for a detailed description of the web pages and the
required entries ( p. 94).
Start web configurator
Connecting to the web configurator
Your phone is connected to the local network.
In most cases, this connection is established automatically as soon as the device is
connected to the network. If this is not the case, connect to the local network via the
handset ( p. 87).
Template Go, Version 1, 01.07.2014 / ModuleVersion 1.0
You may not be able to change some settings in the web configurator, depending on
the provider.
The web configurator cannot be accessed by more than one user at any one time.
You can still make phone calls while working on the web configurator.
Establishing a connection via the phone's IP address
¤
Finding out the current IP address of the phone: Briefly press the registration/paging key
on the base . . . the IP address is displayed on the handset
The IP address can sometimes change, depending on the settings of the DHCP server
in your network.
¤
Start your web browser on the PC/tablet Enter IP-address of phone in the browser address
field (example: 192.168.2.2) . . . A connection is established to the phone's web configurator
93
Gigaset E630A GO / LUG_GO AU en / A31008-M2725-C401-1-7619 / settings_web-conf.fm / 11/8/17
Web configurator
Establishing a connection via the phone's domain name
PC/tablet and phone are connected to the Internet.
¤
Start your web browser on the PC/tablet
http://www.gigaset-config.com
In the web browser address field, enter
If you can contact multiple Gigaset devices via your Internet connection:
Select device
The connection between the PC and the web configurator is a local connection
(LAN connection). The Internet is only accessed to establish the connection.
Registering/de-registering with the web configurator
Registering, setting the interface language
Once you have successfully established the connection, the website Welcome is displayed in the
web browser.
¤ Select the desired language Enter PIN (default setting: 0000) OK
For your security, you should change the default PIN (
p. 105).
De-registering
¤
Click on Log off at the top right in the menu bar.
Always end the web configurator with the command Log off. If the web browser is
closed without de-registering first, access to the web configurator may be blocked for
a few minutes.
Template Go, Version 1, 01.07.2014 / ModuleVersion 1.0
Help
¤
Click on the question mark
separate window
Searching in help:
on the top right of a web page . . . Online help opens in a
Click inside the Help window
Press Ctrl and F. A search dialog opens.
The help pages are downloaded directly from the configuration server.
You may need to change your browser settings to display the help pages correctly.
Internet Explorer and Firefox require the following settings, for example:
¤ You must allow blocked active content for help (right-click the information bar at
the top of the browser window).
¤ Allow the pages to use their own fonts or set Arial as the standard font (general
option).
94
Gigaset E630A GO / LUG_GO AU en / A31008-M2725-C401-1-7619 / settings_web-conf.fm / 11/8/17
Web configurator
Carry out initial configuration
A wizard is available for initial configuration when no VoIP connection (IP account) has been set
up. The wizard will help you configure an IP account.
The phone offers a range of provider profiles that make it easier to configure an IP account. Each
profile contains the most important configuration settings for the provider concerned.
¤ Home Quick Start Wizard Next
¤ Country Select from list Next
If the phone is connected to a PABX that provides IP accounts, you can select the PABX here.
¤ Provider Select from list Next
If the provider does not appear in the list: Select Other provider . . . You must now enter
the provider data yourself
For help, see page Settings Telephony Connections
¤ Enter the provider's access data Next . . . The phone is registered with the provider
¤ If the provider has a network mailbox: Enter the phone number . . . The mailbox will be
activated once you close the wizard
¤ If all outgoing calls from the registered handset are to be made via this VoIP connection as
standard: Mark Yes
Default setting: No . . . Outgoing calls are made via fixed line network connection
Detailed assignments for multiple handsets, multiple VoIP connections and incoming calls
Number Assignment ( p. 98)
¤ Finish . . . The connection is recorded in the phone connection list ( p. 97)
Template Go, Version 1, 01.07.2014 / ModuleVersion 1.0
Change settings for this connection and/or set up further VoIP connections:
¤ Settings Telephony Connections ( p. 97).
95
Gigaset E630A GO / LUG_GO AU en / A31008-M2725-C401-1-7619 / settings_web-conf.fm / 11/8/17
Web configurator
Network
IP Configuration
Connect phone to local network (LAN)/router.
¤
Settings
Network
IP Configuration
In most cases, special settings are not required to connect the phone to the router/a local
network. Your phone is preconfigured for dynamic assignment of the IP address by default
(DHCP). In order for your router to "recognise" the phone, dynamic IP address assignment must
also be activated on the router, i. e. the router's DHCP server must be activated.
If the DHCP server cannot or should not be activated, you must assign a fixed/static IP address
to the phone. A fixed IP address is useful, for example, if port forwarding or a DMZ is set up on
the router for the phone.
You can use the web configurator to make further settings that are required if you connect your
phone to a large (company-wide or organisation-wide) network, or if you want to manage the
phone remotely.
• VLAN identifier / VLAN priority Store for access to a tagged VLAN.
• Allow PCs outside your LAN to connect to the web configurator.
Authorising access from other networks increases the risk of unauthorised access. It
is therefore recommended that you disable remote access if you no longer require it.
The web configurator can only be accessed from other networks if your router passes
on the service requests from "outside" to port 80 (the default port) of the phone.
Make sure you read the user guide for your router.
Security
Template Go, Version 1, 01.07.2014 / ModuleVersion 1.0
The phone supports the establishment of secure data connections on the Internet with the TLS
security protocol (Transport Layer Security). With TLS, the client (the phone) uses certificates to
identify the server. These certificates must be stored on the base.
¤
Settings
Network
Security
On this page, you will find the Server certificates / CA certificates lists with the certificates saved
on the base.
The Invalid certificates list contains the certificates received from servers that have not passed
the certificate check when establishing a connection, and certificates from the Server
certificates / CA certificates lists that have become invalid (e. g. because they have expired).
You can remove certificates and download new certificates to the base, and you can also accept
or reject invalid certificates.
If the connection to a data server on the Internet is not made because the phone does not accept
the certificate received from the server (e. g. when downloading your e-mail messages from the
POP3 server), you will be prompted to open the Security settings web page.
The Invalid certificates list contains the certificate used to make the connection. Click on
[Details] to display information about who issued the certificate (certification authority) and for
whom, as well as its validity period.
96
Gigaset E630A GO / LUG_GO AU en / A31008-M2725-C401-1-7619 / settings_web-conf.fm / 11/8/17
Web configurator
If you accept the certificate, depending on its type, it is transferred to one of the Server
certificates / CA certificates lists (even if it has already expired). If a server responds again with
this certificate, this connection is accepted immediately.
If you decline the certificate, it is transferred to the Server certificates list with the label
(rejected). If a server responds again with this certificate, this connection is rejected
immediately.
Telephony
Connections to base
Manage connections to base:
¤
Settings
Telephony
Connections
This web page displays a list with all possible connections and their status (e. g. Connected,
Registered, Not configured):
Fixed line
You do not have to configure the fixed line network connection. You can make or receive calls
on the fixed line network connection once your phone is connected to the fixed line network
connection.
Making changes via [Edit]:
• Name of the fixed line network connection. The name entered is shown, e. g. for calls to your
fixed line network connection, in the displays of the registered handsets and in the call list.
• Setting Dialling Mode and Flash time. The flash time is set by default for operating the
phone on the main connection. You must change it if necessary if you connect the phone to
a PABX (see the user guide for your PABX).
Template Go, Version 1, 01.07.2014 / ModuleVersion 1.0
Gigaset.net
The Gigaset.net connection is preconfigured in your phone. Your phone is preassigned a
Gigaset.net number. You can activate and deactivate the Gigaset.net connection. If the
connection is deactivated, the phone will not register with the Gigaset.net service. You are then
not available via the Gigaset.net connection.
Making changes via [Edit]:
• Name of Gigaset.net connection
• Deactivate STUN. The Gigaset.net connection uses a STUN server as standard. In the sent
data packets, Gigaset.net replaces the private IP address of your phone with its public
IP- address. If you operate your phone behind a router with symmetric NAT, STUN cannot be
used. You must deactivate it. Otherwise, when making Gigaset.net calls you will not be able
to hear the caller.
IP1 - IP6
You can assign up to six VoIP connections (VoIP phone numbers) to your phone. You need an IP
account from a provider for each VoIP phone number. Save the access data in your phone.
Set up/change VoIP connections via [Edit]
97
Gigaset E630A GO / LUG_GO AU en / A31008-M2725-C401-1-7619 / settings_web-conf.fm / 11/8/17
Web configurator
Send and receive connections
For the number assignment, open the web page:
¤
Settings
Telephony
Number Assignment
Assign send and receive connections to the registered handsets and answer machine on the
base :
• The fixed line network connection is assigned to each handset automatically when they are
registered.
• You can assign each handset either a fixed phone number or a line selection. With line
selection, you choose the connection to be used for each call.
• The Gigaset.net number is assigned as the fixed send connection for each registered
handset. Numbers that end in #9 are automatically dialled via Gigaset.net.
• Once the new entry is made, each connection is assigned to integrated answer machine 1 as
a connection.
• Answer machines 2 and 3 are only activated if you have assigned each one at least one
connection. If an answer machine is not activated, it does not appear on the answer machine
list and you cannot activate it.
• Each connection can only be assigned to one answer machine.
You can avoid having to assign connections to certain phone numbers by using a
dialling plan for these phone numbers.
Activating a fixed line network connection as a fallback send connection
You can activate the fixed line network connection on your phone as a fallback connection. If a
call attempt fails via VoIP (IP connection or Gigaset.net), an attempt is automatically made
(without prompting) to establish a connection via the fixed line network.
¤ . . . In Alternative Connection, activate the Automatic fallback to fixed line option
A fallback is used in the following situations:
• The IP connections are busy (you can make calls on a maximum of two IP lines at the same
Template Go, Version 1, 01.07.2014 / ModuleVersion 1.0
time)
• The SIP server for the VoIP connection cannot be accessed
• The VoIP connection has not yet been configured or has not been configured correctly
(e. g. incorrect password)
• The phone does not have a connection to the Internet, e. g. because your router is
deactivated or not connected to the Internet.
SMS messages that are to be sent via a VoIP connection are not sent via the fallback connection.
Deactivate option if you are not connected to a fixed line network (default setting).
Otherwise, you will be switched automatically to the fixed line network if no IP
connection can be established temporarily, e. g. if the phone starts faster than the
router. The phone would therefore not be functional.
98
Gigaset E630A GO / LUG_GO AU en / A31008-M2725-C401-1-7619 / settings_web-conf.fm / 11/8/17
Web configurator
Voice quality for VoIP connections
Functions to improve the voice quality on VoIP connections (IP or Gigaset.net) are available on
the web page:
¤
Settings
Telephony
Audio
The voice quality for VoIP connections is mainly determined by the voice codec used for
transferring the data and the available bandwidth of your DSL connection.
In the case of the voice codec, the voice data is digitised (coded/decoded) and compressed. A
"better" codec (better voice quality) means more data needs to be transferred, i. e. it requires a
DSL connection with a larger bandwidth. You can change the voice quality by selecting (bearing
in mind the bandwidth of your DSL connection) the voice codecs your phone is to use, and
specifying the order in which the codecs are to be suggested when a VoIP connection is
established. Default settings for the codecs used are stored in your phone; one setting optimised
for low bandwidths and one for high bandwidths. The following voice codecs are supported:
G.722
Excellent voice quality. The broadband voice codec G.722 works at the same bit rate as G.711
(64 kbit/s per speech connection) but with a higher sampling rate. You can use this to play
back higher frequencies. The speech tone is therefore clearer and better than with the other
codecs (High Definition Sound Performance).
G.711 a law / G.711 μ law
Excellent voice quality (comparable with ISDN). The required bandwidth is 64 kbit/s per voice
connection.
Template Go, Version 1, 01.07.2014 / ModuleVersion 1.0
G.726
Good voice quality (inferior to that with G.711 but better than with G.729). Your phone
supports G.726 with a transmission rate of 32 kbit/s per voice connection.
G.729
Average voice quality. The necessary bandwidth is less than or equal to 8 kbit/s per voice
connection.
To save additional bandwidth and transmission capacity on VoIP connections that use the
G.729 codec you can suppress the transmission of voice packets in pauses ("silence
suppression"). Instead of the background noises in your environment, your caller then hears
a synthetic noise generated in the receiver (option: Enable Annex B for codec G.729).
Network mailbox
If the provider (fixed line network and/or Internet telephony) has a network mailbox, this is
displayed on the following web page:
¤
Settings
Telephony
Network mailboxes
You can enter the phone numbers for the network mailbox here and switch the network mailbox
for the configured VoIP connections on and off.
99
Gigaset E630A GO / LUG_GO AU en / A31008-M2725-C401-1-7619 / settings_web-conf.fm / 11/8/17
Web configurator
User-defined dialling plans
You can define your own dialling plans on the web page:
¤
Settings
Telephony
Dialling Plans
You can specify the following dialling plans:
• Specify a connection for phone numbers (Fixed line, Gigaset.net or IP1 - IP6), which should
always be used to dial these phone numbers and therefore also for billing.
If you enter just a few digits (e. g. local area, national or mobile network code) any call to a
number beginning with these digits will be made via the selected connection.
• If you block phone numbers, your phone will not establish a connection to these numbers
(e. g. 0190 or 0900 numbers).
These dialling plans apply to all registered handsets. The send connection settings are inactive
when you dial numbers that are governed by a dialling plan.
You can activate and deactivate the dialling plans as required.
Dialling plans, with the exception of a block, are not effective if you have assigned the
line selection to a display key on the handset and you explicitly choose a send
connection from the list of available connections before dialling.
Emergency numbers
Dialling plans for emergency numbers (e. g. the local police emergency number) are preset for
certain countries. The fixed line network is set as the Connection.
You should only change these dialling plans if the phone is not connected to the fixed line
network. If you choose an IP connection, please make sure the provider supports calls to
emergency numbers. If the VoIP connection is deleted from the configuration, the emergency
call can no longer be made.
Access codes – dialling plans when connecting to a PABX
Template Go, Version 1, 01.07.2014 / ModuleVersion 1.0
If your phone is connected to a PABX, you may have to enter an access code for external calls
(outside line code, e. g. "0").
Save one access code each for fixed line network and VoIP calls and specify when the phone
numbers should be automatically prefixed with the digits.
These settings are available in the Access Code area on the web page:
¤
Settings
Telephony
Dialling Plans
Local area codes – dialling plans for local calls using VoIP
If you use VoIP to make a call to the fixed line network, you may also have to dial the area code
for local calls (depending on the provider). You can avoid having to enter your own local area
code by entering the full area code (with the international code) for the location where you are
using the phone in the phone configuration and activating the Predial area code for local calls
via VoIP option.
These settings are available in the Area Codes area on the web page:
¤
Settings
100
Management
Local Settings
Gigaset E630A GO / LUG_GO AU en / A31008-M2725-C401-1-7619 / settings_web-conf.fm / 11/8/17
Web configurator
Special settings for Internet telephony
Activating Call Forwarding for VoIP connections
The settings for Call Forwarding are on the web page:
¤
Settings
Telephony
Call Divert
You can divert calls to your VoIP connections and to your Gigaset.net number.
You can divert calls to your VoIP connections to any external number (VoIP, fixed line network or
mobile number). Call Forwarding takes place via VoIP.
You can divert calls to your Gigaset.net number within the Gigaset.net, i. e. to another
Gigaset.net number.
Setting DTMF signalling for VoIP
You can change the settings for DTMF signalling in the DTMF over VoIP Connections area on the
web page:
¤
Settings
Telephony
Advanced VoIP Settings
DTMF signalling is required, for example, for querying and controlling certain network
mailboxes via digit codes or for remote operation of a local answer machine.
To send DTMF signals via VoIP you must first define how key codes should be converted into and
sent as DTMF signals: as audible information via the speech channel or as an "SIP Info" message.
Ask your provider which type of DTMF transmission it supports.
You can configure your phone in such a way that it attempts with each call to set the most
suitable DTMF signalling for the current codec (Automatic).
Or you can explicitly define the type of DTMF signalling:
• Audio or RFC 2833, if DTMF signals are to be transmitted acoustically (in voice packets).
• SIP info, if DTMF signals are to be transmitted as code.
Template Go, Version 1, 01.07.2014 / ModuleVersion 1.0
DTMF signals cannot be transmitted in the audio path (Audio) on broadband
connections (the G.722 codec is used).
Configuring call transfer via VoIP
You can change the settings for call transfer in the Call Transfer area on the web page:
¤
Settings
Telephony
Advanced VoIP Settings
You can transfer an external call to a VoIP connection to a second external participant by
pressing the Recall key (depending on the provider).
Add/change settings for call transfer:
• Activate call transfer by ending the call. The two external participants will be connected
when you press the End call key
.
• Activate direct call transfer. The call can be transferred before the second participant has
answered.
• Press the Recall key to deactivate call transfer if you want to assign a different feature to the
Recall key ( "Defining Recall key functions for VoIP (hook flash)").
101
Gigaset E630A GO / LUG_GO AU en / A31008-M2725-C401-1-7619 / settings_web-conf.fm / 11/8/17
Web configurator
Defining Recall key functions for VoIP (hook flash)
You can specify the function for the Recall key on the web page:
¤
Settings
Telephony
Advanced VoIP Settings
Your provider may support special performance features. To make use of these features, your
phone needs to send a specific signal (data packet) to the SIP server. You can assign this "signal"
as the Recall function to the Recall key on the handsets. Prerequisite: The Recall key is not used
for call transfer (default setting).
If you press this key during a VoIP call, the signal is sent. This requires that DTMF signalling via
SIP info messages is activated on the phone (see above).
Defining local communication ports for VoIP
The settings for the communication ports are on the web page:
¤
Settings
Telephony
Advanced VoIP Settings
The following communication ports are used for Internet telephony:
• SIP port: The communication port via which the phone receives (SIP) signalling data. The
default standard port number is set to 5060 for SIP signalling.
• RTP port: Two consecutive RTP ports (consecutive port numbers) are required for each VoIP
connection. Voice data is received via one port and control data via the other. The default
standard port number is set to 5004 - 5020.
This setting only has to be changed if the port numbers are already being used by other
participants in the LAN. You can then specify other fixed port numbers or port number ranges
for the SIP and RTP port.
If several VoIP phones are operated on the same router with NAT, it makes sense to use randomly
selected ports. The phones must then use different ports so that the router's NAT is only able to
forward incoming calls and voice data to one (the intended) phone. Use the web configurator to
specify a port number range for the SIP and RTP port that the ports are chosen from.
Template Go, Version 1, 01.07.2014 / ModuleVersion 1.0
Messaging
E-mail notifications
Save the address of the incoming e-mail server and personal access data for your mailbox in the
base. Specify the time interval at which the phone should check whether the incoming e-mail
server has received new e-mail messages. Specify whether authentication on the incoming
e-mail server should be carried out via a secure connection.
¤ Settings Messaging Email
Message Notification
The LED in the message key on the base connected with the handset indicates when a new
message, e. g. a new e-mail, has been received. You can specify for each individual handset what
kind of new message should be displayed.
¤ Settings Messaging Message Notification
102
Gigaset E630A GO / LUG_GO AU en / A31008-M2725-C401-1-7619 / settings_web-conf.fm / 11/8/17
Web configurator
Call notifications on mobile devices
To receive notifications about newly received calls/messages on your phone on a mobile device
(e. g. your smartphone), you need to register the phone with Gigaset elements.
You have a mobile device with an iOS or Android operating system.
The Gigaset elements app has been installed on the mobile device.
The registration must be carried out on both the phone and the mobile device:
On the phone's web configurator:
¤ Settings Messaging Call Notification
is displayed
On mobile device:
Open Gigaset elements
¤
System overview
tion code from the web configurator
Click on Register now . . . An activation code
Add +
Tap on GO-Box
Enter activa-
Next . . . The mobile device is now ready to display
incoming calls/messages on your phone
On the phone's web configurator:
If registration was successful, Registered at Gigaset elements will be displayed. The available
phone connections are listed.
¤ Mark the connections for which you want to receive notifications on your mobile device
Set
If answer machines have been assigned to the connections ( p. 98), you will also
receive notifications for newly received messages on these answer machines to your
smartphone.
Further information about Gigaset GO can be found at
www.gigaset.com/go
Template Go, Version 1, 01.07.2014 / ModuleVersion 1.0
Info Services
Customise personal services on the Gigaset.net server for the Info Center and screensaver Info
Services. Activate info services for handsets.
¤ Settings Info Services
On this page, you will be able to access the Gigaset.net server and view your personal access
data.
Directories
Online Directory
Select provider for online directory. You can set the Display of caller’s name option, depending
on the provider selected. This means that the name of the caller is read from the online directory
for incoming calls and shown on the display (where the handset's local directory does not
contain an entry for the caller's number).
¤ Settings Directories Online Directory
103
Gigaset E630A GO / LUG_GO AU en / A31008-M2725-C401-1-7619 / settings_web-conf.fm / 11/8/17
Web configurator
Directory Transfer
Deleting handset directories and downloading to/from the PC.
¤
Settings
Directory Transfer
• Save directories on a PC. Entries are stored in vCard format in a vcf file on the PC. You can
•
•
download these files onto every registered handset. You can also copy directory entries to
your PC address book.
Copy contact details from your PC address book to handset directories. Export contacts in vcf
files (vCards) and transfer to handset directories.
Delete a directory on the handset. If you have edited the directory file (vcf file) on the PC and
would like to load this modified directory to the handset, you can delete the current directory
on the handset before the transfer.
Tip: Back up the current directory on your PC before deleting it. You can then reload it if the
modified directory is affected by formatting errors and some, or all, of it cannot be loaded
onto the handset.
• You can find information on vCard format (vcf) on the Internet, e. g. at:
•
www.en.wikipedia.org/wiki/VCard (English)
www.de.wikipedia.org/wiki/VCard (German)
(You can set the display language at the bottom left side in the navigation area of
the web page)
If you wish to copy a directory (vcf file) with multiple entries stored on the PC to the
Microsoft Outlook™ address book, please note the following:
Microsoft Outlook™ only ever transfers the first (directory) entry from the vcf file to
its address book.
Transfer rules
Template Go, Version 1, 01.07.2014 / ModuleVersion 1.0
The directory entries from a vcf file that are loaded onto the handset will be added to the
directory. If an entry already exists for a name, it will either be supplemented or a new entry for
the name will be created. The process will not overwrite or delete any phone numbers.
Depending on your device type, up to three entries with the same name are created in
the directory for each vCard – one entry per entered number.
Contents of directory file (vcf-file)
The following data (if available) is written into the vcf file for entry into the directory or
transferred from a vcf file into the handset directory:
• Name
• First name
• Number
• Number (office)
• Number (mobile)
• E-mail address
• Anniversary date (YYYY-MM-DD) and the time of the reminder call (HH:MM) separated by a
"T" (example: 2008-12-24T11:00).
Other information that a vCard may contain is not entered into the handset directory.
104
Gigaset E630A GO / LUG_GO AU en / A31008-M2725-C401-1-7619 / settings_web-conf.fm / 11/8/17
Web configurator
Example of an entry in vCard format:
BEGIN:VCARD
VERSION:2.1
N:Smith;Anna
TEL;HOME:1234567890
TEL;WORK:0299123456
TEL;CELL:0175987654321
E-MAIL:anna@musterfrau.de
BDAY:2008-12-24T11:00
END:VCARD
Management
Date and Time
Managing the synchronisation of the base with a time server. By default, your phone is
configured so that the date/time is transferred from a time server on the Internet. Changes to
time server settings via web page:
¤ Settings Management Date and Time
Changing the base settings, registering handsets
• Switch the base to registration mode to register more handsets to the base. This setting
•
•
•
•
corresponds to pressing and holding the registration/paging key on the front of the base.
Activate or deactivate Eco Mode or Eco Mode+.
Change the system PIN for your phone.
Activate and deactivate the LED for the registration/paging key on the front of the base.
Activate or deactivate the display of VoIP status messages on your handset.
The base settings are on the web page
Template Go, Version 1, 01.07.2014 / ModuleVersion 1.0
¤
Settings
Management
Miscellaneous
Rebooting the device or restoring the factory settings
If your phone suddenly does not work as expected, you can reboot it. This frequently resolves
problems.
You can also reset all of the settings on the phone to the default settings e.g. if you want to give
your phone to a third participant. This deletes all settings, lists and directory entries!
¤
Settings
Management
Reboot & Reset
105
Gigaset E630A GO / LUG_GO AU en / A31008-M2725-C401-1-7619 / settings_web-conf.fm / 11/8/17
Web configurator
Saving and restoring system settings
Once you have configured your base and after each configuration change, you can save the
current base settings in a file on the PC (suffix .cfg). You can reload the file onto the phone again
when necessary.
¤
Settings
Management
Save and Restore
The contents of the .cfg file include:
• The settings for the local network (IP configuration)
• The data for the (VoIP) connections established
• The assignment of send and receive connections
• Your own local area code and access code
• The network mailbox number
• The Internet services settings
• The ECO DECT settings
Firmware Update - Base
Regular updates to the base firmware and the provider profile for VoIP connections (general
provider data) are made available on an Internet configuration server. You can download these
updates onto your base as required. The URL for this server is stored in the base.
¤
Settings
Management
Firmware Update - Base
Starting firmware update
If a new version of the firmware is available, this is downloaded to the base and the base is
restarted. A firmware update lasts approx. six minutes. The duration also depends on the
bandwidth of your DSL connection.
Enabling/disabling the automatic version check
Template Go, Version 1, 01.07.2014 / ModuleVersion 1.0
When the version check is enabled, the phone checks on a daily basis whether the Gigaset
configuration server has a new version of the phone firmware.
If the phone is not connected to the Internet at the time when the check is to be performed
(e. g. because the router is disabled), the check is performed as soon as the phone is reconnected
to the Internet.
If a new version is available, a message to this effect is shown on the display of the registered
handsets. You can start the update of the firmware on one of the handsets.
Downgrading firmware
¤ You can reload the firmware version that was loaded before the last update on the base.
or
¤
You can reload the firmware version that was loaded by default onto the phone.
The selected firmware is reloaded onto the phone and the current firmware is overwritten.
106
Gigaset E630A GO / LUG_GO AU en / A31008-M2725-C401-1-7619 / settings_web-conf.fm / 11/8/17
Web configurator
Status of the phone
¤ Status Device
Information about the phone is displayed:
• IP and MAC address for the base
• Version of the firmware currently loaded, format: aa.bbb (aabbbxxyyyzz)
aa
bbb
xx
yyyzz
•
¤
Phone product variant
Firmware version
Sub-version
only significant for the service
Example: 42.020 (420200000000 / V42.00) means that version 20 of the firmware is currently
loaded on your base.
A list of the registered handsets
Status
Connections
Template Go, Version 1, 01.07.2014 / ModuleVersion 1.0
The page displays the currently available connections and their status.
107
Gigaset E630A GO / LUG_GO AU en / A31008-M2725-C401-1-7619 / settings_web-conf.fm / 11/8/17
Web configurator
Menu overview
Quick Start Wizard
Settings
p. 95
Network
Telephony
Messaging
IP Configuration
p. 96
Security
p. 96
Connections
p. 97
Audio
p. 99
Number Assignment
p. 98
Call Divert
p. 101
Dialling Plans
p. 100
Network mailboxes
p. 99
Advanced VoIP Settings
p. 101
Email
p. 103
Message Notification
p. 102
Call Notification
p. 103
Info Services
Directories
Template Go, Version 1, 01.07.2014 / ModuleVersion 1.0
Management
Status
108
p. 103
Online Directory
p. 103
Directory Transfer
p. 104
Date and Time
p. 105
Local Settings
p. 100
Miscellaneous
p. 105
Reboot & Reset
p. 105
Save and Restore
p. 106
Firmware Update - Base
p. 106
Device
p. 107
Connections
p. 107
Gigaset E630A GO / LUG_GO AU en / A31008-M2725-C401-1-7619 / appendix_legal_GO.fm / 11/8/17
Customer service & product warranty – Australia and New Zealand
Appendix
Customer service & product warranty – Australia and
New Zealand
IMPORTANT
Please retain your sales receipt as proof of the date of purchase.
Customer Service
If you require assistance in operating this product please contact us
AUS: +61 1300 780 878 or by e-mail at the Customer Care section of our website at www.gigaset.com.
NZ: 0800 780 878 or by e-mail at the Customer Care section of our website at www.gigaset.com.
If you are trying to access a Network Service and require assistance specifically related to the network service
or would like to subscribe to the service, contact your service provider.
Template Go, Version 1, 01.07.2014 / ModuleVersion 1.0
Product Warranty
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a repair or replacement for a major failure and for compensation for any other reasonably foreseeable
loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.
Subject to the conditions stated in this Product Warranty Section, this product, excluding battery and accessory devices, is guaranteed against any defect in materials or workmanship under conditions of normal use for
a period of 12 months from date of purchase (Product Warranty).
The benefits conferred by this warranty are in addition to other warranties and remedies that are implied
under the Australian Trade Practices Act and similar Country, State and Territory laws (Statutory Rights). For
New Zealand customers, this warranty is in addition to statutory rights observed under New Zealand Legislation.
Subject to your Statutory Rights, the goods will not be eligible for service under this warranty if:
1 Proof of purchase cannot be provided;
2 The defect was caused by an accident, misuse, abuse, improper installation or operation, vermin infestation, lack of reasonable care, unauthorised modification, loss of parts, tampering or attempted repair by a
person not authorised by Gigaset; or
3 The product has been damaged by lightning or a mains power surge.
4 The Phone was not imported into Australia by Gigaset Communications GmbH.
To obtain service during the terms of this warranty and/or to claim warranty call the Information Line on
AUS: +61 1300 780 878 or by e-mail at the Customer Care section of our website at www.gigaset.com.
NZ: 0800 780 878
If it is necessary to have the product serviced, the customer service representative will inform you of the product return process. If it is necessary to have the product serviced under warranty in both Australia and New
Zealand you will need to return the product to your place of purchase. If this is not possible please call the relevant Technical Support line listed in this document whereby the customer service representative will inform
you of the product return process. Except as explicitly stated in this document, all other expenses with regard
to claiming Product Warranty shall be borne by you.
Please ensure that:
1 You provide proof of purchase;
2 Your product is suitably packaged; and
3 You have included all components from the original purchase.
In Australia and New Zealand the product will be serviced within ten business days after the defective product
is received by the authorised agent.
109
Gigaset E630A GO / LUG_GO AU en / A31008-M2725-C401-1-7619 / appendix_legal_GO.fm / 11/8/17
Customer service & product warranty – Australia and New Zealand
Any and all warranty services referred to under this Product Warranty will be provided
In Australia by
CommsPlus Distribution, Unit 3a, 100 Station Street, Nunawading, Victoria, 3131 Phone: +61 1300 780
878, and by
PBAX warehouse, Unit 20/28 Barcoo Street, Roseville 2069 Phone: 1300 768 548, and
in New Zealand by Atlas Gentech (NZ) Limited, 76 Carbine Road, Mt Wellington, Auckland 1741 Phone:
0800 780 878.
Subject to your Statutory Rights:
1 Any claim under this warranty is limited to the cost of repair or replacement of the product; and
2 If the goods are found to be in sound working order by the authorised service centre, you may be charged
a fee for service and for any other direct costs associated with having the product delivered for service.
Replacement or repair services are only offered for products purchased in Australia and New Zealand that bear
RCM or Telepermit markings respectively.
¥
¥
Please have your proof of purchase ready when calling.
IMPORTANT NOTICE:
Under power failure conditions, this telephone may not operate.
Please ensure that a separate telephone, not dependent upon local power, is available for emergency
use.
Questions and answers
Possible solutions are available online at
www.gigaset.com/service
FAQ
Troubleshooting
The phone is not ready for use after initial set-up.
• The one-off initialisation phase may take up to 10 minutes.
The display is blank.
The handset is not activated.
Press and hold
The battery is empty.
Charge the battery or replace it (
Template Go, Version 1, 01.07.2014 / ModuleVersion 1.0
•
•
p. 9)
"No Base" flashes on the display.
• The handset is outside the range of the base station. Move the handset closer to the base station
• The base is not activated. Check the base station power adapter
• The base station's range is reduced because Maximum Range is deactivated.
• Activate Maximum Range ( p. 55) or reduce the distance between the handset and base station
"Please register handset" flashes on the display.
• The handset has not yet been registered or was de-registered due to the registration of an additional handset (more than 6 DECT registrations).
Re-register the handset (
p. 73)
Your settings are not accepted.
The wrong profile has been set.
( p. 50).
•
110
Set Profile Personal . . . then make changes to the device settings
Gigaset E630A GO / LUG_GO AU en / A31008-M2725-C401-1-7619 / appendix_legal_GO.fm / 11/8/17
Customer service & product warranty – Australia and New Zealand
The handset does not ring.
• The ringtone is deactivated. Activate ringtone ( p. 85)
• Call forwarding is set. Deactivate call forwarding ( p. 29)
• The phone does not ring if the caller has withheld his number.
• Activate the ringtone for anonymous calls ( p. 57)
• The phone does not ring during a specific period or for certain numbers.
• Check the time control for external calls ( p. 56)
No ringtone/dial tone from the fixed line network.
• Incorrect phone cable. Please always use the phone cable supplied or ensure that the pin connections
are correct when purchasing from a retailer ( p. 117).
The connection always terminates after approx. 30 seconds.
A repeater (earlier than Version 2.0) has been activated or deactivated (
off and back on again ( p. 12).
•
Error tone sounds after system PIN prompt.
You have entered the wrong system PIN.
( p. 89)
•
Forgotten system PIN.
Reset the system PIN to 000 (
•
p. 75).
Switch the handset
Repeat the process, reset the system PIN to 0000 if required
p. 89)
The other party cannot hear you.
• The handset is "muted". Activate the microphone again (
p. 24)
Some of the network services do not work as specified.
• Features are not enabled. Contact the network provider for details.
The caller's number is not displayed.
Calling Line Identification (CLI) is not enabled for the caller.
The caller should ask the network provider
to enable Calling Line Identification (CLI).
• Calling Line Identification Presentation (CLIP) is not supported or enabled by the network
provider. Ask the network provider to enable Caller Line Identification Presentation (CLIP).
• The telephone is connected via a PABX or a router with an integrated PABX (gateway) that does not transmit all information.
• Reset the system: Briefly pull out the power plug. Reinsert the plug and wait until the device restarts.
• Check the settings on the PABX and activate phone number display, if necessary. To do this, search for
terms such as CLIP, calling line identification, telephone number identification, caller ID, ... in the system user guide or ask the system manufacturer.
Template Go, Version 1, 01.07.2014 / ModuleVersion 1.0
•
You hear an error tone when keying in (descending tone sequence).
• Action has failed/invalid input. Repeat the process. Read the display and refer to the user guide if necessary.
You cannot listen to messages on the network mailbox.
Your PABX is set to pulse dialling. Set your PABX to tone dialling.
•
No time is specified for a message in the call list.
• Date/time are not set. Set the date/time.
Internet telephony not possible.
No IP account has been set up: Register the phone with your provider for Internet telephony ( p. 13)
Display shows Provider error registration failed: Registration of the phone with your provider for Internet
telephony has failed.
Repeat the process ( p. 13). Check registration status in web configurator if necessary ( p. 97).
• Display shows No IP connection: No IP account configured or the IP connections have been deactivated
•
•
111
Gigaset E630A GO / LUG_GO AU en / A31008-M2725-C401-1-7619 / appendix_legal_GO.fm / 11/8/17
Customer service & product warranty – Australia and New Zealand
No connection to the Internet.
• Display shows No LANconnection: Check cable connection between router and base.
• Display shows IP address not available: Check IP configuration.
The phone is preconfigured for dynamic assignment of the IP address. In order for your router to "recognise" the phone, dynamic IP address assignment must also be activated on the router, i. e. the router's
DHCP server must be activated.
If the router's DHCP server cannot be/is not activated: Assign a fixed IP address to the phone.
• Display shows Check IP settings: The telephone is not connected to the Internet.
• Check the cable connections between the base station and router and between the router and the
Internet.
• Check the telephone's connection with the LAN, check whether the phone can be contacted at its IP
address. Check the IP address on the handset.
• Display shows Internet connection not available:
Connection to the Internet has been interrupted: Please try again later
Otherwise: Check the plug connection between the router and modem or DSL connection and the
router settings.
Firmware update or VoIP profile download is not carried out.
• Display shows Currently not possible: The VoIP connections may be busy or a download/update is already
being carried out.
Try again later.
• Display shows Server not accessible:
• The download server is not available. Try again later.
• The router is not available or has no connection to the Internet. Check the connection between the
phone and the router and restart the router if necessary.
• The pre-set server address has been changed. Change the address in the web configurator or reset
the base station.
• Display shows Transmissionerror XXX: An error occurred while transferring the file. An HTTP error code is
displayed in place of XXX.
Repeat the process. If the error occurs again, consult the service department.
You cannot establish a connection to the phone with your PC's web browser.
• IP address is incorrect: Request the handset's IP address Try to re-establish the connection.
• Check connections between the PC and the base station. Open the command box on the PC send a
ping command to the base station (ping <base station's local IP address>).
• You have tried to reach the phone via a secure http (https://...). Retry with http://...
Template Go, Version 1, 01.07.2014 / ModuleVersion 1.0
GO functions
The smartphone display does not show the complete phone number and area code.
• Country code and local area code are not set correctly. Configuring settings:
With handset: Settings – Telephony – Area Codes
With web configurator: Settings – Management – Local Settings
No events displayed on the smartphone (e. g. missed call).
You have not selected a connection that can be used to transfer events to your smartphone.
• Once you have registered the phone with Gigaset elements on the web configurator page Settings –
Messaging – Call Notification select connection(s)
•
The name of the participant is not displayed in the events list on your smartphone.
The contact is not available on your smartphone.
Enter contact.
The participant number is stored differently in the contact list, e. g. without the area code
• Configure settings for country code and local area code:
With handset: Settings – Telephony – Area Codes
With web configurator: Settings – Management – Local Settings
•
•
Calling back a missed call from your smartphone.
Tap the event entry Missed calls
tap on the Call back icon.
¥
112
Gigaset E630A GO / LUG_GO AU en / A31008-M2725-C401-1-7619 / appendix_legal_GO.fm / 11/8/17
Customer service & product warranty – Australia and New Zealand
Answer machine (
p. 43)
No time is specified for a message in the call list.
• Date/time are not set. Set the date/time ( p. 86)
The answer machine reports "Invalid PIN" during remote operation.
You have entered the wrong system PIN.
Repeat input of system PIN
The system PIN is still set to 0000. Set the system PIN to something other than 0000 (
•
•
p. 89)
The answer machine is not recording any messages/has switched to answer only mode.
• The memory is full. Delete old messages Listen to new messages and then delete
Operation behind routers with network address translation
(NAT)
In general, no special telephone or router configuration is required when operating a Gigaset telephone with
NAT router. The configuration settings described in this section are only necessary if you encounter one of the
following problems.
• No incoming calls are possible via VoIP. Calls to your VoIP phone numbers are not put through.
• Outgoing calls via VoIP are not connected.
• A connection is established with the other participant, but you cannot hear them and/or they cannot hear
you.
Changing the port numbers for SIP and RTP on your VoIP phone
Template Go, Version 1, 01.07.2014 / ModuleVersion 1.0
¥
¥
¥
The SIP and RTP port numbers may not be used by any other application or by any other host in the
LAN and should be completely different to the SIP and port numbers that are usually used (and preset in the phone).
Connect to the telephone's web configurator using the PC web browser
Register
tings – Telephony – Advanced VoIP Settings
Change SIP and RTP port numbers
Example: Select port numbers that are similar to the standard settings:
SIP port
49060
instead of
5060
RTP port
49004 to 49010
instead of
5004 to 5010
Open website SetSave settings
Check new settings: Open website Settings – Telephony – Connections . . . the Status of the VoIP settings is displayed
Test to see whether the original problem persists. If the problem does persist, carry out the next step.
Setting port forwarding on the router
Details for enabling a port on the router (example):
Protocol
Public port
Local port
Local host (IP)
for SIP
UDP
49060
49060
192.168.2.10
for RTP
UDP
49004 – 49010
49004 – 49010
192.168.2.10
Protocol
The protocol used must be UDP.
Public port
Port number/port number range on the WAN interface
Local port
The SIP and RTP port numbers set on the phone
Local host (IP)
Local IP address of your phone in the LAN
To enable the router to perform this port forwarding, the DHCP settings of the router must ensure that the
phone is always assigned the same local IP address.
113
Gigaset E630A GO / LUG_GO AU en / A31008-M2725-C401-1-7619 / appendix_legal_GO.fm / 11/8/17
Manufacturer's advice
Exclusion of liability
Your handset's display consists of pixels. Each pixel consists of three sub-pixels (red, green, blue).
It may be the case that a sub-pixel is missing or has a colour deviation.
A warranty claim is only valid if the maximum number of permitted pixel errors is exceeded.
Description
Maximum number of permitted pixel errors
Colour illuminated sub-pixels
1
Dark sub-pixels
1
Total number of coloured and dark sub-pixels
1
Signs of wear on the display and casing are excluded from the warranty.
Manufacturer's advice
Environment
Our environmental statement
We at Gigaset Communications GmbH are aware of our social responsibility. That is why we actively take steps
to create a better world. In all areas of our business – from product planning and production to sales and waste
of disposal – following our environmental conscience in everything we do is of utmost importance to us.
Learn more about our earth-friendly products and processes online at www.gigaset.com.
Template Go, Version 1, 01.07.2014 / ModuleVersion 1.0
Environmental management system
Gigaset Communications GmbH is certified pursuant to the international standards ISO 14001 and
ISO 9001.
ISO 14001 (Environment): Certified since September 2007 by TÜV SÜD Management Service
GmbH.
ISO 9001 (Quality): Certified since 17/02/1994 by TÜV SÜD Management Service GmbH.
Disposal
Batteries should not be disposed of in general household waste. Observe the local waste disposal regulations,
details of which can be obtained from your local authority.
All electrical and electronic products should be disposed of separately from the municipal waste stream via
designated collection facilities appointed by the government or the local authorities.
This crossed-out wheeled bin symbol on the product means the product is covered by the European Directive 2012/19/EU.
The correct disposal and separate collection of your old appliance will help prevent potential negative consequences for the environment and human health. It is a precondition for reuse and recycling of used electrical and electronic equipment.
For more detailed information about disposal of your old appliance, please contact your local council refuse
centre or the original supplier of the product.
114
Gigaset E630A GO / LUG_GO AU en / A31008-M2725-C401-1-7619 / appendix_legal_GO.fm / 11/8/17
Manufacturer's advice
Care
Wipe the device with a damp cloth or an antistatic cloth. Do not use solvents or microfibre cloths.
Never use a dry cloth; this can cause static.
In rare cases, contact with chemical substances can cause changes to the device’s exterior. Due to the wide
variety of chemical products available on the market, it was not possible to test all substances.
Impairments in high-gloss finishes can be carefully removed using display polishes for mobile phones.
Contact with liquid
Template Go, Version 1, 01.07.2014 / ModuleVersion 1.0
Your handset is splash proof.
If it comes into contact with water, knock the water out of the microphone opening and remove any water on
the handset with an absorbent cloth. Your handset is ready for use.
If your handset comes into contact with a larger amount of liquid take the following steps:
1 Disconnect the power supply.
2 Remove the batteries and leave the battery compartment open.
3 Allow the liquid to drain from the device.
4 Pat all parts dry.
5 Place the device in a dry, warm place for at least 72 hours (not in a microwave, oven etc.) with the battery
compartment open and the keypad facing down (if applicable).
6 Do not switch on the device again until it is completely dry.
When it has fully dried out, you will normally be able to use it again.
115
Gigaset E630A GO / LUG_GO AU en / A31008-M2725-C401-1-7619 / appendix_technical_GO.fm / 11/8/17
Technical data
Technical data
Batteries
Technology:
2 x AAA NiMH
Voltage:
1.2 V
Capacity:
750 mAh
Handset operating times/charging times
The operating time of your Gigaset depends on the capacity of the battery, its age and the way
it is used. (All times are maximum possible times.)
Standby time (hours)
320/200 *
Talktime (hours)
14
Operating time with 1.5 hours of calls per day (hours)
130/100 *
Charging time in charging cradle (hours)
7.5
* No Radiation on/off, without display backlight in idle status
Power consumption of the handset in the charging cradle
When charging:
approx. 1.5 W
To maintain the charge status:
approx. 0.5 W
Base station power consumption
In standby mode
approx. 1.3 W
During a call
approx. 1.4 W
Template Go, Version 1, 01.07.2014 / ModuleVersion 1.0
General specifications
DECT standard
Supported
GAP standard
Supported
No. of channels
60 duplex channels
Radio frequency range
1880-1900 MHz
Duplex mode
Time division multiplexing, 10 ms frame length
Repetition frequency of the transmission
pulse
100 Hz
Duration of the transmission pulse
370 μs
Channel grid
1728 kHz
Bit rate
1152 kbit/s
Modulation
GFSK
Language code
32 kbit/s
Transmission power
10 mW average power per channel, 250 mW pulse power
Range
Up to 50 m indoors, up to 300 m outdoors
116
Gigaset E630A GO / LUG_GO AU en / A31008-M2725-C401-1-7619 / appendix_technical_GO.fm / 11/8/17
Technical data
Base station power supply
230 V ~/50 Hz
Environmental conditions for operation
+5 °C to +45 °C; 20% to 75% relative humidity
Codec
G.711, G.726, G.729AB with VAD/CNG, G.722
Quality of Service
TOS, DiffServ
Protocols
SIP, RTP, DHCP, NAT Traversal (STUN), HTTP
Pin connections on the telephone jack
3
4
2
5
1
6
1
2
3
4
5
6
unused
unused
a
b
unused
unused
Character charts
Standard characters
Press the relevant key the number of times indicated.
1x
2
3
4
5
L
M
N
O
Q
2x
3x
4x
5x
6x
7x
8x
9x
10x
b
e
h
k
n
q
u
x
.
c
f
i
l
o
r
v
y
,
2
3
4
5
6
s
8
z
?
ä
ë
ï
á
é
í
à
è
ì
â
ê
î
ã
ç
ö
7
ü
9
!
ñ
ß
ú
ÿ
ó
ò
ô
õ
ù
ý
0
û
æ
ø
å
1
a
d
g
j
m
p
t
w
1)
2)
Template Go, Version 1, 01.07.2014 / ModuleVersion 1.0
1) Space
2) Line break
117
Gigaset E630A GO / LUG_GO AU en / A31008-M2725-C401-1-7619 / symbols.fm / 11/8/17
Display icons
Display icons
The following icons are displayed depending on the settings and the operating status of your
telephone.
Icons in the status bar
Icon
Meaning
Icon
Meaning
Keypad lock activated
Signal strength (No Radiation off )
1% -100%
white, if Maximum Range on;
green, if Maximum Range off
Battery charge status:
White: between 11% and 100%
charged
Red: no connection to the base station
Red: less than 11% charged
No Radiation activated:
white, if Maximum Range on;
green, if Maximum Range off
Flashes red: battery almost empty
(approx. 5 minutes of talktime left)
Battery is charging
(current charge status):
0% - 100%
Answer machine activated indicator
flashes: Answer machine is recording
a message or is being operated by
another internal participant
Profile Silent activated (Ringtone
switched off )
"Beep" ringtone activated
Display key icons
Icon
Meaning
Icon
Meaning
Last number redial
Open the directory
Delete text
Copy number to the directory
Template Go, Version 1, 01.07.2014 / ModuleVersion 1.0
Divert a call to answer machine
118
Gigaset E630A GO / LUG_GO AU en / A31008-M2725-C401-1-7619 / symbols.fm / 11/8/17
Display icons
Display icons to indicate . . .
Icon
Meaning
Icon
Meaning
External call
Reminder for appointment
Internal call
Reminder for anniversary
Establishing a call (outgoing call)
Alarm call
Connection established
Answer machine is recording
No connection established/
connection terminated
Other display icons
Template Go, Version 1, 01.07.2014 / ModuleVersion 1.0
Icon
Meaning
Icon
Meaning
Alarm clock is activated, display with
alarm time
Information
Action complete (green)
(Security) prompt
Action failed (red)
Please wait ...
119
Gigaset E630A GO / LUG_GO AU en / A31008-M2725-C401-1-7619 / menutree_GO.fm / 11/8/17
Menu overview
Menu overview
Not all functions described in the user guide are available in all countries or from all network
providers.
Open the main menu:
when handset is in idle status press
Messaging
SMS
New SMS
p. 58
Incoming
p. 60
Entwürfe
Settings
p. 59
Service Centres
p. 62
Status Report
p. 64
Notification
p. 62
eMail
p. 65
Call Lists
p. 34
All calls
Outgoing calls
Accepted calls
Missed calls
Answer Machine
Play Messages
Template Go, Version 1, 01.07.2014 / ModuleVersion 1.0
Activation
Announcements
Net AM: IP1 - IP6
p. 43
Answer Mach. 1 bis 3
p. 43
Answer Mach. 1 bis 3
p. 43
Record Announcem.
Answer Mach. 1 bis 3
p. 46
Play Announcement
Answer Mach. 1 bis 3
p. 47
Delete Announcem.
Answer Mach. 1 bis 3
p. 47
Rec. Advisory Msg.
Answer Mach. 1 bis 3
p. 46
Del. Advisory Msg.
Answer Mach. 1 bis 3
Recordings
Call Screening
Network Mailbox
p. 47
p. 47
p. 45
Net AM: Fixed Line
p. 48
Net AM: IP1 - IP6
Set Key 1
120
p. 49
Gigaset E630A GO / LUG_GO AU en / A31008-M2725-C401-1-7619 / menutree_GO.fm / 11/8/17
Menu overview
Select Services
Call Divert
Internal
p. 30
Fixed Line
p. 30
IP1
p. 30
Call Waiting
p. 29
Transfer (ECT)
p. 27
Additional Features
Info Centre
User-specific selection of info services
p. 68
Spot LED
p. 51
Calendar
p. 51
Alarm Clock
p. 53
Baby Monitor
p. 54
One Touch Call
p. 21
Missed Alarms
p. 52
Settings
Date/Time
Audio Settings
p. 86
Handset Volume
Acoustic Profiles
Template Go, Version 1, 01.07.2014 / ModuleVersion 1.0
Language
Earpiece Profiles
p. 81
Handsfree Profiles
p. 81
Advisory Tones
p. 86
Silent Alert
p. 85
Ringtones (Handset)
Display
p. 83
Volume
p. 84
Melodies
p. 84
Time Control
p. 56
Anon. Calls Silent
p. 57
Music on hold
p. 87
Screensaver
p. 81
Info Ticker
p. 82
Colour Schemes
p. 82
Backlight
p. 82
p. 81
121
Gigaset E630A GO / LUG_GO AU en / A31008-M2725-C401-1-7619 / menutree_GO.fm / 11/8/17
Menu overview
Registration
Telephony
Register Handset
p. 73
De-register Handset
p. 74
Select Base
p. 74
Auto Answer
p. 22
LED Call Signal
p. 83
Easy Acceptance
p. 22
Area Codes
p. 77
IP Wizard
Send Connections
Rec. Connections
Recall
Access Code
System
Reset Handset
p. 87
Base Reset
p. 88
Base Restart
p. 89
Encryption
p. 75
Repeater
Local Network
ECO DECT
Template Go, Version 1, 01.07.2014 / ModuleVersion 1.0
only when at least one
repeater has been registered
p. 76
p. 87
Update Firmware
p. 88
System PIN
p. 89
Maximum Range
p. 55
No Radiation
122
p. 77
Gigaset E630A GO / LUG_GO AU en / A31008-M2725-C401-1-7619 / LUG_GOSIX.fm / 11/8/17
Index
Template Go, Version 1, 01.07.2014 / ModuleVersion 1.0
Index
A
Access code (PABX) . . . . . . . . . . . . . . . . . 77, 100
Activating/deactivating message LED . . . . . . . . 33
Activation code for elements . . . . . . . . . . . . . 103
Advisory tones . . . . . . . . . . . . . . . . . . . . . 82, 83
Alarm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
Alarm clock . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
switch on/off . . . . . . . . . . . . . . . . . . . . . . . 53
Alert tone (beep) . . . . . . . . . . . . . . . . . . . . . . . 50
Anniversary, see Appointment
Announcement (answer machine) . . . . . . . . . . 47
deleting . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
Announcement mode (answer machine) . . . . . . 43
Anonymous calling . . . . . . . . . . . . . . . . . . . . . 28
Answer machine . . . . . . . . . . . . . . . . . . . . . . . 43
activating/deactivating . . . . . . . . . . . . . . . . 43
announcement mode . . . . . . . . . . . . . . . . . 43
calling back a caller . . . . . . . . . . . . . . . . . . . 34
deleting messages . . . . . . . . . . . . . . . . . . . 44
playing back messages . . . . . . . . . . . . . 43, 49
receive connection . . . . . . . . . . . . . . . . . . . 16
recording a personal announcement/
advisory message . . . . . . . . . . . . . . . . 46
remote operation . . . . . . . . . . . . . . . . . . . . 45
set fast access . . . . . . . . . . . . . . . . . . . . . . . 49
skipping ahead . . . . . . . . . . . . . . . . . . . . . . 44
skipping back . . . . . . . . . . . . . . . . . . . . . . . 44
Appointment
display missed . . . . . . . . . . . . . . . . . . . . . . 52
missed . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
notification . . . . . . . . . . . . . . . . . . . . . . . . . 52
setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
Assigning key 1 . . . . . . . . . . . . . . . . . . . . . . . . 49
Assigning number key . . . . . . . . . . . . . . . . . . . 83
Auto Answer
simple (Easy Acceptance) . . . . . . . . . . . . . . . 22
Automatic
answer . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80
Automatic versions check . . . . . . . . . . . . . . . . 106
B
Baby monitor . . . . . . . . . . . . . . . . . . . . . . . . . 54
activation . . . . . . . . . . . . . . . . . . . . . . . . . . 54
deactivation . . . . . . . . . . . . . . . . . . . . . . . . 55
Base
connect to fixed line network . . . . . . . . . . . . 11
connect to mains power supply . . . . . . . . . . 11
connect to the Internet . . . . . . . . . . . . . . . . 12
Base settings
change in web configurator . . . . . . . . . . . . 105
Base station
changing . . . . . . . . . . . . . . . . . . . . . . . . . . 74
changing the name . . . . . . . . . . . . . . . . . . . 74
connecting to the PABX . . . . . . . . . . . . . . . . 76
overview . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
restarting . . . . . . . . . . . . . . . . . . . . . . . . . . 89
restoring to default settings . . . . . . . . . . . . 89
setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86
system PIN . . . . . . . . . . . . . . . . . . . . . . . . . 89
updating firmware . . . . . . . . . . . . . . . . . . . 88
Battery
charging . . . . . . . . . . . . . . . . . . . . . . . . . . 10
charging status. . . . . . . . . . . . . . . . . . . . . 118
inserting . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Beep (alert tone) . . . . . . . . . . . . . . . . . . . . . . . 50
Best base station . . . . . . . . . . . . . . . . . . . . . . . 74
Black list . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
Broadband voice codec . . . . . . . . . . . . . . . . . . 99
Broken display . . . . . . . . . . . . . . . . . . . . . . . . . 7
C
Calendar . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
Call
accepting. . . . . . . . . . . . . . . . . . . . . . . . . . 22
external . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
internal . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
transferring internally (connecting) . . . . . . . 23
two-way recording . . . . . . . . . . . . . . . . . . . 44
Call block . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
Call divert. . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Gigaset.net . . . . . . . . . . . . . . . . . . . . . . . . 30
Call Forwarding
for VoIP connections . . . . . . . . . . . . . . . . . 101
Gigaset.net . . . . . . . . . . . . . . . . . . . . . . . 101
Call list
copying a number to the directory . . . . . . . . 34
delete . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
delete an entry . . . . . . . . . . . . . . . . . . . . . . 34
dialling . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
entry . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
opening . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Call lists . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Call notifications
to mobile device . . . . . . . . . . . . . . . . . . . . 103
Call protection . . . . . . . . . . . . . . . . . . . . . . . . 57
Call screening during recording . . . . . . . . . . . . 45
Call waiting, external . . . . . . . . . . . . . . . . . . . . 29
accepting/rejecting . . . . . . . . . . . . . . . 22, 23
Call waiting, internal
accept . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Call, anonymous . . . . . . . . . . . . . . . . . . . . . . . 28
protection from . . . . . . . . . . . . . . . . . . . . . 57
Caller display . . . . . . . . . . . . . . . . . . . . . . . . . 28
Calling
entering IP address . . . . . . . . . . . . . . . . . . . 26
external . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
from online directory . . . . . . . . . . . . . . . . . 40
from Yellow Pages . . . . . . . . . . . . . . . . . . . 40
Gigaset.net . . . . . . . . . . . . . . . . . . . . . . . . 42
internal . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Calling Line Identification . . . . . . . . . . . . . . . . 28
none . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Cancel the alarm (baby monitor) . . . . . . . . . . . 55
123
Gigaset E630A GO / LUG_GO AU en / A31008-M2725-C401-1-7619 / LUG_GOSIX.fm / 11/8/17
Template Go, Version 1, 01.07.2014 / ModuleVersion 1.0
Index
Care . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 115
Care of the device . . . . . . . . . . . . . . . . . . . . . 115
Certificate error . . . . . . . . . . . . . . . . . . . . . . . . 65
Changing
display language . . . . . . . . . . . . . . . . . . . . . 78
earpiece volume . . . . . . . . . . . . . . . . . . . . . 80
handsfree volume . . . . . . . . . . . . . . . . . . . . 80
system PIN . . . . . . . . . . . . . . . . . . . . . . . . . 89
Changing the name of the handset . . . . . . . . . . 75
Changing the PIN . . . . . . . . . . . . . . . . . . . . . . 89
Changing the system PIN . . . . . . . . . . . . . . . . . 89
Character charts . . . . . . . . . . . . . . . . . . . . . . 117
Charge status of the batteries . . . . . . . . . . . . . 118
Charging cradle (handset)
connecting . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Charging time of handset . . . . . . . . . . . . . . . . 116
CLI, Calling Line Identification . . . . . . . . . . . . . . 28
CLIP, CLI Presentation . . . . . . . . . . . . . . . . . . . . 28
CLIR, CLI Restriction . . . . . . . . . . . . . . . . . . . . . 28
Colour scheme . . . . . . . . . . . . . . . . . . . . . . . . 79
Communication ports, local . . . . . . . . . . . 92, 102
Conference . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Conference call
end . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
two external calls . . . . . . . . . . . . . . . . . . . . 31
Configuration wizard . . . . . . . . . . . . . . . . . . . . 95
Connecting the PC to the web configurator . . . . 93
Connecting to the web configurator . . . . . . . . . 93
Connections
fixed line network . . . . . . . . . . . . . . . . . . . . 97
Gigaset.net . . . . . . . . . . . . . . . . . . . . . . . . . 97
IP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97
manage . . . . . . . . . . . . . . . . . . . . . . . . . . . 97
status . . . . . . . . . . . . . . . . . . . . . . . . . . . . 107
Connections with the base station . . . . . . . . . . 74
Consultation call
ending . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
external . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
internal . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Contact with liquid . . . . . . . . . . . . . . . . . . . . 115
Contents of the package . . . . . . . . . . . . . . . . . . 8
Control key . . . . . . . . . . . . . . . . . . . . . . . . . 5, 17
Correcting incorrect entries . . . . . . . . . . . . . . . 19
Customer Care . . . . . . . . . . . . . . . . . . . . . . . 110
Customer service & product warranty . . . . . . . 109
Customising info services . . . . . . . . . . . . . . . . . 68
D
Deactivating wireless module . . . . . . . . . . . . . . 56
Deleting
messages . . . . . . . . . . . . . . . . . . . . . . . . . . 44
De-registering (handset) . . . . . . . . . . . . . . . . . 74
De-registering (web configurator) . . . . . . . . . . . 94
Dialling
from the call list . . . . . . . . . . . . . . . . . . . . . 21
from the directory . . . . . . . . . . . . . . . . . . . . 20
from the redial list . . . . . . . . . . . . . . . . . . . . 20
IP address . . . . . . . . . . . . . . . . . . . . . . . . . . 26
using quick dial . . . . . . . . . . . . . . . . . . . . . . 83
Dialling pause . . . . . . . . . . . . . . . . . . . . . . . . . 77
124
Dialling plans
emergency numbers . . . . . . . . . . . . . . . . . 100
Directory . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
copying numbers . . . . . . . . . . . . . . . . . . . . 36
dialling numbers . . . . . . . . . . . . . . . . . . . . 20
entry . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Gigaset.net . . . . . . . . . . . . . . . . . . . . . . . . 41
memory. . . . . . . . . . . . . . . . . . . . . . . . . . . 36
opening . . . . . . . . . . . . . . . . . . . . . . . . 35, 39
order of entries . . . . . . . . . . . . . . . . . . . . . . 36
saving an entry . . . . . . . . . . . . . . . . . . . . . . 35
searching . . . . . . . . . . . . . . . . . . . . . . . . . . 36
searching for an entry . . . . . . . . . . . . . . . . . 39
selecting an entry . . . . . . . . . . . . . . . . . . . . 36
sending entry/list to handset . . . . . . . . . . . . 37
sending to handset . . . . . . . . . . . . . . . . . . . 37
transferring to/from PC . . . . . . . . . . . . . . . 104
Directory file
contents (vCard format) . . . . . . . . . . . . . . 104
Directory transfer . . . . . . . . . . . . . . . . . . . . . 104
Display
activating/deactivating new message . . . . . 33
anonymous . . . . . . . . . . . . . . . . . . . . . . . . 28
backlight . . . . . . . . . . . . . . . . . . . . . . . . . . 79
broken . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
changing display language . . . . . . . . . . . . . 78
colour scheme . . . . . . . . . . . . . . . . . . . . . . 79
directory memory. . . . . . . . . . . . . . . . . . . . 36
external . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
IP address on handset . . . . . . . . . . . . . . . . . . 5
missed appointment/anniversary . . . . . . . . 52
network mailbox message . . . . . . . . . . . . . . 32
screensaver . . . . . . . . . . . . . . . . . . . . . . . . 78
setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78
unknown . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Display icons . . . . . . . . . . . . . . . . . . . . . . . . 118
Display keys . . . . . . . . . . . . . . . . . . . . . . . . 5, 18
assigning . . . . . . . . . . . . . . . . . . . . . . . . . . 83
icons . . . . . . . . . . . . . . . . . . . . . . . . . . . . 118
Disposal . . . . . . . . . . . . . . . . . . . . . . . . . . . . 114
DNS server
preferred . . . . . . . . . . . . . . . . . . . . . . . . . . 87
Draft message list (SMS) . . . . . . . . . . . . . . . . . 59
DTMF signalling for VoIP . . . . . . . . . . . . . . . . 101
E
Earpiece volume . . . . . . . . . . . . . . . . . . . . . . . 24
Easy Acceptance . . . . . . . . . . . . . . . . . . . . . . . 22
ECO DECT . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
ECT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
E-mail
delete . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67
messages whilst making a connection . . . . . 66
notification . . . . . . . . . . . . . . . . . . . . . . . . 65
settings . . . . . . . . . . . . . . . . . . . . . . . . . . 102
viewing the sender's address . . . . . . . . . . . . 67
E-mail address . . . . . . . . . . . . . . . . . . . . . . . . 59
E-mail list . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
Emergency number, dialling plans . . . . . . . . . 100
Gigaset E630A GO / LUG_GO AU en / A31008-M2725-C401-1-7619 / LUG_GOSIX.fm / 11/8/17
Index
Emergency numbers
not possible . . . . . . . . . . . . . . . . . . . . . . . . . 7
Enable Annex B for codec G.729 . . . . . . . . . . . . 99
End call key . . . . . . . . . . . . . . . . . . . . . . . . . 5, 20
Enter special letters . . . . . . . . . . . . . . . . . . . . . 19
Enter umlauts . . . . . . . . . . . . . . . . . . . . . . . . . 19
Entering special characters . . . . . . . . . . . . . . . . 19
Entering text . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Entering the number
of the network mailbox . . . . . . . . . . . . . . . . 48
Environment . . . . . . . . . . . . . . . . . . . . . . . . . 114
Exclusion of liability . . . . . . . . . . . . . . . . . . . . 114
External call
forwarding to answer machine . . . . . . . . . . . 44
Template Go, Version 1, 01.07.2014 / ModuleVersion 1.0
F
Factory settings . . . . . . . . . . . . . . . . . . . . . . . 105
Fast access . . . . . . . . . . . . . . . . . . . . . . . . 20, 49
Fax (SMS) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
Firmware
automatic update . . . . . . . . . . . . . . . . 88, 106
downgrade . . . . . . . . . . . . . . . . . . . . . . . . 106
starting update . . . . . . . . . . . . . . . . . . . . . . 88
update . . . . . . . . . . . . . . . . . . . . . . . . . . . 106
Firmware update . . . . . . . . . . . . . . . . . . . . . . . 84
Fixed line network connection . . . . . . . . . . 11, 97
Flash time . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76
G
G.711 a law . . . . . . . . . . . . . . . . . . . . . . . . . . . 99
G.711 μ law . . . . . . . . . . . . . . . . . . . . . . . . . . . 99
G.722 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99
G.722 broadband voice codec . . . . . . . . . . . . . 99
G.726 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99
G.729 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99
Garantie . . . . . . . . . . . . . . . . . . . . . . . . . . . . 114
Getting started . . . . . . . . . . . . . . . . . . . . . . . . . 8
Gigaset elements . . . . . . . . . . . . . . . . . . . 12, 103
activation code . . . . . . . . . . . . . . . . . . . . . 103
register with . . . . . . . . . . . . . . . . . . . . . . . 103
Gigaset GO . . . . . . . . . . . . . . . . . . . . . . . . . 1, 12
features . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
settings in web configurator. . . . . . . . . . . . 103
Gigaset.net . . . . . . . . . . . . . . . . . . . . . . . . 90, 97
call divert . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Call Forwarding . . . . . . . . . . . . . . . . . . . . . 101
calling a participant . . . . . . . . . . . . . . . . . . . 42
changing/deleting own name . . . . . . . . . . . 42
directory . . . . . . . . . . . . . . . . . . . . . . . . . . 41
entering name . . . . . . . . . . . . . . . . . . . . . . 42
register. . . . . . . . . . . . . . . . . . . . . . . . . 41, 91
searching for participants . . . . . . . . . . . . . . 41
Gigaset.net website . . . . . . . . . . . . . . . . . . . . . 68
Gigaset-config. . . . . . . . . . . . . . . . . . . . . . . . . 94
GO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
settings in web configurator. . . . . . . . . . . . 103
GPL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 129
Guarantee Certificate . . . . . . . . . . . . . . . . . . . 114
H
Handset
advisory tones . . . . . . . . . . . . . . . . . . . . . . 83
changing the name . . . . . . . . . . . . . . . . . . 75
changing the number . . . . . . . . . . . . . . . . . 75
changing the settings . . . . . . . . . . . . . . . . . 78
changing to a different base station . . . . . . . 74
changing to best reception . . . . . . . . . . . . . 74
colour scheme . . . . . . . . . . . . . . . . . . . . . . 79
connecting the charging cradle . . . . . . . . . . . 9
de-registering the handset . . . . . . . . . . . . . 74
display backlight . . . . . . . . . . . . . . . . . . . . 79
display language . . . . . . . . . . . . . . . . . . . . 78
earpiece volume . . . . . . . . . . . . . . . . . . . . . 80
handset volume . . . . . . . . . . . . . . . . . . . . . 24
handsfree volume . . . . . . . . . . . . . . . . . 24, 80
idle status . . . . . . . . . . . . . . . . . . . . . . . . . 19
muting . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
overview . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
paging . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75
registering . . . . . . . . . . . . . . . . . . . . . . . . . 73
registering to another base station. . . . . . . . 74
restoring to default setting . . . . . . . . . . . . . 83
searching for . . . . . . . . . . . . . . . . . . . . . . . 75
setting up . . . . . . . . . . . . . . . . . . . . . . . . . . 9
switch on/off . . . . . . . . . . . . . . . . . . . . . . . 17
update. . . . . . . . . . . . . . . . . . . . . . . . . . . . 84
use as a baby monitor . . . . . . . . . . . . . . . . . 54
Handsfree key. . . . . . . . . . . . . . . . . . . . . . . 5, 24
Handsfree mode . . . . . . . . . . . . . . . . . . . . . . . 24
Handsfree profile . . . . . . . . . . . . . . . . . . . . . . 81
Handsfree volume. . . . . . . . . . . . . . . . . . . . . . 24
Hash key . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Headset connection . . . . . . . . . . . . . . . . . . . . . 5
Hearing aids . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Help . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 110
I
Icons
alarm clock . . . . . . . . . . . . . . . . . . . . . . . . 53
displaying new messages . . . . . . . . . . . . . . 32
indications . . . . . . . . . . . . . . . . . . . . . . . . 119
new SMS . . . . . . . . . . . . . . . . . . . . . . . . . . 60
on display keys . . . . . . . . . . . . . . . . . . . . . 118
status bar . . . . . . . . . . . . . . . . . . . . . . . . . 118
Idle status
returning to . . . . . . . . . . . . . . . . . . . . . . . . 19
Incoming message list (e-mail) . . . . . . . . . . . . . 65
Indications, icons . . . . . . . . . . . . . . . . . . . . . 119
Info Centre . . . . . . . . . . . . . . . . . . . . . . . . . . . 68
operating . . . . . . . . . . . . . . . . . . . . . . . . . . 70
starting . . . . . . . . . . . . . . . . . . . . . . . . . . . 69
Info services
activating/deactivating . . . . . . . . . . . . . . . . 68
selecting . . . . . . . . . . . . . . . . . . . . . . . . . . 69
using quick dial . . . . . . . . . . . . . . . . . . . . . 71
Installation wizard. . . . . . . . . . . . . . . . . . . . . . 13
125
Gigaset E630A GO / LUG_GO AU en / A31008-M2725-C401-1-7619 / LUG_GOSIX.fm / 11/8/17
Index
Internal
consultation . . . . . . . . . . . . . . . . . . . . . . . . 23
making calls . . . . . . . . . . . . . . . . . . . . . . . . 22
International code . . . . . . . . . . . . . . . . . . . . . . 86
Internet
security . . . . . . . . . . . . . . . . . . . . . . . . . . . 96
Internet connection . . . . . . . . . . . . . . . . . . . . . 12
Internet security . . . . . . . . . . . . . . . . . . . . . . . 96
Internet telephony. . . . . . . . . . . . . . . . . . . . . . 25
IP address
assigning . . . . . . . . . . . . . . . . . . . . . . . . . . 87
dialling . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
display . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75
obtaining automatically . . . . . . . . . . . . . . . . 87
IP configuration . . . . . . . . . . . . . . . . . . . . . . . . 87
IP connections. . . . . . . . . . . . . . . . . . . . . . . . . 97
IP telephony provider . . . . . . . . . . . . . . . . . . . 14
Template Go, Version 1, 01.07.2014 / ModuleVersion 1.0
K
Key 1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Key, assigning . . . . . . . . . . . . . . . . . . . . . . . . . 83
Keys
control key . . . . . . . . . . . . . . . . . . . . . . . 5, 17
display keys . . . . . . . . . . . . . . . . . . . . . . 5, 18
End call key. . . . . . . . . . . . . . . . . . . . . . . . . 20
end call key. . . . . . . . . . . . . . . . . . . . . . . . . . 5
handsfree . . . . . . . . . . . . . . . . . . . . . . . . . . 24
hash key . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
key 1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
menu key . . . . . . . . . . . . . . . . . . . . . . . . . . 17
message key . . . . . . . . . . . . . . . . . . . . . . . . . 5
on/off key . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
profile key . . . . . . . . . . . . . . . . . . . . . . . 5, 50
recall key . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
star key. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
volume . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
L
Language
display . . . . . . . . . . . . . . . . . . . . . . . . . 11, 78
LED . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
LED light . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
LGPL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 129
Linked, see SMS
Liquid . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 115
List
e-mail notifications . . . . . . . . . . . . . . . . . . . 65
SMS draft message list . . . . . . . . . . . . . . . . . 59
SMS message list . . . . . . . . . . . . . . . . . . . . . 60
Local area code . . . . . . . . . . . . . . . . . . . . . . . . 86
for VoIP calls . . . . . . . . . . . . . . . . . . . . . . . 100
Locking/unlocking the keypad . . . . . . . . . . . . . 17
Lower/upper case . . . . . . . . . . . . . . . . . . . . . . 19
M
MAC address
checking . . . . . . . . . . . . . . . . . . . . . . . . . . 88
Making calls
accepting a call . . . . . . . . . . . . . . . . . . . . . . 22
external . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
126
internal . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
over the Internet . . . . . . . . . . . . . . . . . . . . 25
Maximum Range . . . . . . . . . . . . . . . . . . . . . . 55
Medical equipment . . . . . . . . . . . . . . . . . . . . . . 7
Melody
ringtone for internal/external calls . . . . . . . . 81
Memory in the directory . . . . . . . . . . . . . . . . . 36
Menu
web configurator overview . . . . . . . . . . . . 108
Menu key . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Message
delete (e-mail) . . . . . . . . . . . . . . . . . . . . . . 67
marking as "new" . . . . . . . . . . . . . . . . . . . . 44
Message display . . . . . . . . . . . . . . . . . . . . . . 102
Message key . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
opening list . . . . . . . . . . . . . . . . . . . . . . . . 60
Message list (SMS). . . . . . . . . . . . . . . . . . . . . . 60
Message lists . . . . . . . . . . . . . . . . . . . . . . . . . 32
Messages
copying number to the directory . . . . . . . . . 44
Microphone . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
switch on/off . . . . . . . . . . . . . . . . . . . . . . . 24
Missed anniversaries/appointments . . . . . . . . . 52
Music on hold . . . . . . . . . . . . . . . . . . . . . . . . . 87
Mute the first ringtone . . . . . . . . . . . . . . . . . . 63
Muting the handset . . . . . . . . . . . . . . . . . . . . 24
N
Network mailbox . . . . . . . . . . . . . . . . . . . . . . 48
activate/deactivate . . . . . . . . . . . . . . . . . . . 48
defining for fast access . . . . . . . . . . . . . . . . 49
enter phone number . . . . . . . . . . . . . . . . . 99
entering number . . . . . . . . . . . . . . . . . . . . 48
Network MB, see Network mailbox
Network provider . . . . . . . . . . . . . . . . . . . . . . 28
Network services, provider-specific . . . . . . . . . 28
Notification
about calls and messages . . . . . . . . . . . . . 103
incoming e-mail . . . . . . . . . . . . . . . . . . . . . 65
Number
copying to the directory . . . . . . . . . . . . . . . 36
saving in the directory . . . . . . . . . . . . . . . . 35
Numbers
entering. . . . . . . . . . . . . . . . . . . . . . . . . . . 19
O
On/off key . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
One touch call . . . . . . . . . . . . . . . . . . . . . . . . 21
Online directory . . . . . . . . . . . . . . . . . . . . . . . 39
Gigaset.net . . . . . . . . . . . . . . . . . . . . . . . . 41
select . . . . . . . . . . . . . . . . . . . . . . . . . . . 103
Open Source Software. . . . . . . . . . . . . . . . . . 129
Opening the incoming e-mail list . . . . . . . . . . . 65
Operating time of handset . . . . . . . . . . . . . . . 116
Outside line code (PABX) . . . . . . . . . . . . . . . . . 77
Overview
base station . . . . . . . . . . . . . . . . . . . . . . . . . 5
handset . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Gigaset E630A GO / LUG_GO AU en / A31008-M2725-C401-1-7619 / LUG_GOSIX.fm / 11/8/17
Index
P
PABX
connecting to the base station . . . . . . . . . . . 76
pauses . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77
saving access code . . . . . . . . . . . . . . . . . . . 77
setting flash time . . . . . . . . . . . . . . . . . . . . 76
SMS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
Paging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75
Pause
after access code . . . . . . . . . . . . . . . . . . . . . 77
after line seizure . . . . . . . . . . . . . . . . . . . . . 77
after Recall key . . . . . . . . . . . . . . . . . . . . . . 77
PC address book entries to the directory
copying . . . . . . . . . . . . . . . . . . . . . . . . . . 104
Phone
setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86
Phone directory, see Directory . . . . . . . . . . . . . 20
Phonebook, see Directory . . . . . . . . . . . . . . . . 20
Picking up
a call from answer machine . . . . . . . . . . . . . 44
Pin connections . . . . . . . . . . . . . . . . . . . . . . . 117
Playing back
announcement (answer machine). . . . . . . . . 47
Playing back messages. . . . . . . . . . . . . . . . . . . 43
Power adapter . . . . . . . . . . . . . . . . . . . . . . . 7, 11
Power consumption. . . . . . . . . . . . . . . . . . . . 116
Preferred DNS server . . . . . . . . . . . . . . . . . . . . 87
Profile key . . . . . . . . . . . . . . . . . . . . . . . . . . 5, 50
Profiles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
Protection from calls
anonymous . . . . . . . . . . . . . . . . . . . . . . . . 57
black list . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
time control . . . . . . . . . . . . . . . . . . . . . . . . 56
Template Go, Version 1, 01.07.2014 / ModuleVersion 1.0
Q
Questions and answers . . . . . . . . . . . . . . . . . 110
Quick dial . . . . . . . . . . . . . . . . . . . . . . . . . 20, 49
R
Radiation
reducing. . . . . . . . . . . . . . . . . . . . . . . . . . . 55
Radiation-free . . . . . . . . . . . . . . . . . . . . . . . . . 56
Rebooting. . . . . . . . . . . . . . . . . . . . . . . . . . . 105
Recall key . . . . . . . . . . . . . . . . . . . . . . . . . . 5, 77
function for VoIP . . . . . . . . . . . . . . . . . . . . 102
Receive connection . . . . . . . . . . . . . . . . . . 15, 91
assigning . . . . . . . . . . . . . . . . . . . . . . . . . . 98
standard assignment . . . . . . . . . . . . . . . . . . 91
Reception booster, see Repeater
Recording
two-way recording . . . . . . . . . . . . . . . . . . . 44
Recording quality (answer machine) . . . . . . . . . 47
Recording time . . . . . . . . . . . . . . . . . . . . . . . . 47
Redial list . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Register
with Gigaset elements . . . . . . . . . . . . . . . . 103
Registering
with web configurator . . . . . . . . . . . . . . . . . 94
Registering (handset) . . . . . . . . . . . . . . . . . . . . 73
Remotely operating the answer machine . . . . . 45
Repeater . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75
Resetting the handset to the default
settings . . . . . . . . . . . . . . . . . . . . . . . . . 85
Resource Directory . . . . . . . . . . . . . . . . . . . . . 83
Restarting the base station . . . . . . . . . . . . . . . 89
RFC 2833 (DTMF signalling) . . . . . . . . . . . . . . 101
Ring delay . . . . . . . . . . . . . . . . . . . . . . . . . . . 80
Ring delay (answer machine) . . . . . . . . . . . . . . 47
Ringtone . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81
changing . . . . . . . . . . . . . . . . . . . . . . . . . . 81
melody for internal/external calls . . . . . . . . . 81
muting . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
muting first . . . . . . . . . . . . . . . . . . . . . . . . 63
time control . . . . . . . . . . . . . . . . . . . . . . . . 56
S
Safety precautions . . . . . . . . . . . . . . . . . . . . . . 7
Screensaver . . . . . . . . . . . . . . . . . . . . . . . . . . 78
Searching
handset . . . . . . . . . . . . . . . . . . . . . . . . . . . 75
Searching for participants on Gigaset.net . . . . . 41
Searching in directory . . . . . . . . . . . . . . . . . . . 36
Send connection . . . . . . . . . . . . . . . . . . . 15, 91
assigning . . . . . . . . . . . . . . . . . . . . . . . . . . 98
standard assignment . . . . . . . . . . . . . . . . . 91
Sender's address (e-mail) . . . . . . . . . . . . . . . . . 67
Sending
entire directory to handset . . . . . . . . . . . . . 37
SMS messages . . . . . . . . . . . . . . . . . . . . . . 58
Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 110
Service provider, see Network provider
Services
online directory . . . . . . . . . . . . . . . . . . . . 103
Setting the date . . . . . . . . . . . . . . . . . . . . . . . 86
Setting the system . . . . . . . . . . . . . . . . . . . . . 86
Setting the time . . . . . . . . . . . . . . . . . . . . . . . 86
Setting up handset . . . . . . . . . . . . . . . . . . . . . . 9
Setting up the base . . . . . . . . . . . . . . . . . . . . . . 8
Setting up the charging cradle (handset) . . . . . . 8
Settings
saving and restoring . . . . . . . . . . . . . . . . . 106
Show new messages . . . . . . . . . . . . . . . . . . . . 32
Signal strength . . . . . . . . . . . . . . . . . . . . . . . 118
Signal tone, see Advisory tones
Silence, suppressing . . . . . . . . . . . . . . . . . . . . 99
Silent alert . . . . . . . . . . . . . . . . . . . . . . . . . . . 82
Simple Auto Answer (Easy Acceptance) . . . . . . . 22
SMS
deleting . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
draft message list . . . . . . . . . . . . . . . . . . . . 59
incoming message list. . . . . . . . . . . . . . . . . 60
linked . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
message list . . . . . . . . . . . . . . . . . . . . . . . . 60
reading . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
receiving . . . . . . . . . . . . . . . . . . . . . . . . . . 60
self help with error messages. . . . . . . . . . . . 64
send centre . . . . . . . . . . . . . . . . . . . . . . . . 62
sending as fax . . . . . . . . . . . . . . . . . . . . . . 59
sending to e-mail address . . . . . . . . . . . . . . 59
127
Gigaset E630A GO / LUG_GO AU en / A31008-M2725-C401-1-7619 / LUG_GOSIX.fm / 11/8/17
Index
Template Go, Version 1, 01.07.2014 / ModuleVersion 1.0
status report . . . . . . . . . . . . . . . . . . . . . . . . 64
temporary storing . . . . . . . . . . . . . . . . . . . . 59
to PABXs . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
troubleshooting . . . . . . . . . . . . . . . . . . . . . 64
vCard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
writing/sending . . . . . . . . . . . . . . . . . . . . . 58
SMS message list (SMS) . . . . . . . . . . . . . . . . . . 60
SMS notification . . . . . . . . . . . . . . . . . . . . . . . 62
SMS service centre
changing the number . . . . . . . . . . . . . . . . . 62
setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
Snooze mode (alarm) . . . . . . . . . . . . . . . . . . . . 53
Sound profiles . . . . . . . . . . . . . . . . . . . . . . . . . 50
Speaker . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Speech pauses, suppressing . . . . . . . . . . . . . . . 99
Star key . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Status bar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
icons . . . . . . . . . . . . . . . . . . . . . . . . . . . . 118
Status information . . . . . . . . . . . . . . . . . . . . . 107
Subnet mask defining . . . . . . . . . . . . . . . . . . . 87
SUOTA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84
Symbols, see Icons . . . . . . . . . . . . . . . . . . . . . 118
System PIN
changing . . . . . . . . . . . . . . . . . . . . . . . . . . 89
resetting. . . . . . . . . . . . . . . . . . . . . . . . . . . 89
System settings securing . . . . . . . . . . . . . . . . . 89
V
vCard (SMS) . . . . . . . . . . . . . . . . . . . . . . . . . . 61
vCard format . . . . . . . . . . . . . . . . . . . . . . . . 105
vcf file . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 104
Version check, automatic . . . . . . . . . . . . . . . . 106
Viewing network mailbox message . . . . . . . . . 32
VIP group, classify directory entry . . . . . . . . . . . 35
VIP ringtone . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Visual call signal . . . . . . . . . . . . . . . . . . . . . 5, 80
Voice quality for VoIP connections . . . . . . . . . . 99
VoIP account . . . . . . . . . . . . . . . . . . . . . . . . . 90
provider . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
set up with web configurator . . . . . . . . . . . . 97
setting up . . . . . . . . . . . . . . . . . . . . . . 13, 90
setting up using the web configurator
configuration wizard . . . . . . . . . . . . . 95
user data . . . . . . . . . . . . . . . . . . . . . . . . . . 14
VoIP provider . . . . . . . . . . . . . . . . . . . . . . . . . 97
Volume
earpiece. . . . . . . . . . . . . . . . . . . . . . . . . . . 80
handset handsfree volume . . . . . . . . . . . . . 80
handset speaker/earpiece volume . . . . . . . . 24
speaker . . . . . . . . . . . . . . . . . . . . . . . . . . . 80
Volume keys . . . . . . . . . . . . . . . . . . . . . . . . . . 18
T
Talk key . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Technical data . . . . . . . . . . . . . . . . . . . . . . . . 116
Telephone
operating . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Telephone jack, pin connections . . . . . . . . . . . 117
Time control for external calls . . . . . . . . . . . . . . 56
Time server . . . . . . . . . . . . . . . . . . . . . . . . . . 105
TLS (Transport Layer Security) . . . . . . . . . . . . . . 96
Transferring, external call internally . . . . . . . . . . 23
Troubleshooting
e-mail . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66
general. . . . . . . . . . . . . . . . . . . . . . . . . . . 110
SMS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
W
Warning tone, see Advisory tones
Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . 114
Weather forecast, display in idle status . . . . . . . 72
Web configurator . . . . . . . . . . . . . . . . . . . . . . 12
configuration wizard . . . . . . . . . . . . . . . . . . 95
connecting with PC . . . . . . . . . . . . . . . . . . 93
de-registration . . . . . . . . . . . . . . . . . . . . . . 94
DTMF signalling for VoIP . . . . . . . . . . . . . . 101
menu . . . . . . . . . . . . . . . . . . . . . . . . . . . 108
registration . . . . . . . . . . . . . . . . . . . . . . . . 94
set up VoIP connection . . . . . . . . . . . . . . . . 97
wizard . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95
Withheld number . . . . . . . . . . . . . . . . . . . . . . 28
Wizard for quick initial configuration . . . . . . . . 95
Writing (SMS) . . . . . . . . . . . . . . . . . . . . . . . . . 58
U
Upper/lower case . . . . . . . . . . . . . . . . . . . . . . 19
Using
multiple handsets . . . . . . . . . . . . . . . . . . . . 73
Y
Yellow Pages
. . . . . . . . . . . . . . . . . . . . . . . . . 39
All rights reserved. Rights of modification reserved.
128
Gigaset E630A GO / LUG_GO AU en / A31008-M2725-C401-1-7619 / licence.fm / 11/8/17
Open Source Software
Open Source Software
General
Your Gigaset device includes Open Source software that is subject to various license conditions. With regard
to Open Source software, the granting of usage rights that go beyond the operation of the device in the form
supplied by Gigaset Communications GmbH is governed by the relevant license conditions of the Open
Source software. The corresponding licence conditions can be found below in their original version.
The respective license texts regularly contain limitations of liability with regard to the relevant licensor of
Open Source Software. The exclusion of liability for theLGPL Version 2.1, for example, reads as follows:
„This library is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even
the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU Lesser
General Public License for more details.”
The liability of Gigaset Communications GmbH remains unaffected by this.
Licence and copyright information
Your Gigaset unit includes Open Source software which is subject to the GNU General Public License (GPL) or
the GNU Library/Lesser General Public License (LGPL). The corresponding licence conditions can be found
below in their original version. You can download the corresponding source code from the Internet at
www.gigaset.com/opensource. The appropriate source code can also be requested from Gigaset Communications GmbH at cost price within three years of purchasing the product. Please use the contact details provided at www.gigaset.com/service.
Licence texts
Template Go, Version 1, 01.07.2014 / ModuleVersion 1.0
GNU LESSER GENERAL PUBLIC LICENSE
Version 2.1, February 1999
Copyright (C) 1991, 1999 Free Software Foundation, Inc. 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301
USA
Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not
allowed.
[This is the first released version of the Lesser GPL. It also counts as the successor of the GNU Library Public
License, version 2, hence the version number 2.1.]
Preamble
The licenses for most software are designed to take away your freedom to share and change it. By contrast, the
GNU General Public Licenses are intended to guarantee your freedom to share and change free software--to
make sure the software is free for all its users.
This license, the Lesser General Public License, applies to some specially designated software packages--typically libraries--of the Free Software Foundation and other authors who decide to use it. You can use it too, but
we suggest you first think carefully about whether this license or the ordinary General Public License is the better strategy to use in any particular case, based on the explanations below.
When we speak of free software, we are referring to freedom of use, not price. Our General Public Licenses are
designed to make sure that you have the freedom to distribute copies of free software (and charge for this service if you wish); that you receive source code or can get it if you want it; that you can change the software and
use pieces of it in new free programs; and that you are informed that you can do these things.
To protect your rights, we need to make restrictions that forbid distributors to deny you these rights or to ask
you to surrender these rights. These restrictions translate to certain responsibilities for you if you distribute
copies of the library or if you modify it.
For example, if you distribute copies of the library, whether gratis or for a fee, you must give the recipients all
the rights that we gave you. You must make sure that they, too, receive or can get the source code. If you link
other code with the library, you must provide complete object files to the recipients, so that they can relink
them with the library after making changes to the library and recompiling it. And you must show them these
terms so they know their rights.
We protect your rights with a two-step method: (1) we copyright the library, and (2) we offer you this license,
which gives you legal permission to copy, distribute and/or modify the library.
129
Gigaset E630A GO / LUG_GO AU en / A31008-M2725-C401-1-7619 / licence.fm / 11/8/17
Open Source Software
Template Go, Version 1, 01.07.2014 / ModuleVersion 1.0
To protect each distributor, we want to make it very clear that there is no warranty for the free library. Also, if
the library is modified by someone else and passed on, the recipients should know that what they have is not
the original version, so that the original author's reputation will not be affected by problems that might be
introduced by others.
Finally, software patents pose a constant threat to the existence of any free program. We wish to make sure
that a company cannot effectively restrict the users of a free program by obtaining a restrictive license from a
patent holder. Therefore, we insist that any patent license obtained for a version of the library must be consistent with the full freedom of use specified in this license.
Most GNU software, including some libraries, is covered by the ordinary GNU General Public License. This
license, the GNU Lesser General Public License, applies to certain designated libraries, and is quite different
from the ordinary General Public License. We use this license for certain libraries in order to permit linking
those libraries into non-free programs.
When a program is linked with a library, whether statically or using a shared library, the combination of the
two is legally speaking a combined work, a derivative of the original library. The ordinary General Public
License therefore permits such linking only if the entire combination fits its criteria of freedom. The Lesser General Public License permits more lax criteria for linking other code with the library.
We call this license the "Lesser" General Public License because it does Less to protect the user's freedom than
the ordinary General Public License. It also provides other free software developers Less of an advantage over
competing non-free programs. These disadvantages are the reason we use the ordinary General Public
License for many libraries. However, the Lesser license provides advantages in certain special circumstances.
For example, on rare occasions, there may be a special need to encourage the widest possible use of a certain
library, so that it becomes a de-facto standard. To achieve this, non-free programs must be allowed to use the
library. A more frequent case is that a free library does the same job as widely used non-free libraries. In this
case, there is little to gain by limiting the free library to free software only, so we use the Lesser General Public
License.
In other cases, permission to use a particular library in non-free programs enables a greater number of people
to use a large body of free software. For example, permission to use the GNU C Library in non-free programs
enables many more people to use the whole GNU operating system, as well as its variant, the GNU/Linux operating system.
Although the Lesser General Public License is Less protective of the users' freedom, it does ensure that the user
of a program that is linked with the Library has the freedom and the wherewithal to run that program using a
modified version of the Library.
The precise terms and conditions for copying, distribution and modification follow. Pay close attention to the
difference between a "work based on the library" and a "work that uses the library". The former contains code
derived from the library, whereas the latter must be combined with the library in order to run.
TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
0. This License Agreement applies to any software library or other program which contains a notice placed by
the copyright holder or other authorized party saying it may be distributed under the terms of this Lesser General Public License (also called "this License"). Each licensee is addressed as "you".
A "library" means a collection of software functions and/or data prepared so as to be conveniently linked with
application programs (which use some of those functions and data) to form executables.
The "Library", below, refers to any such software library or work which has been distributed under these terms.
A "work based on the Library" means either the Library or any derivative work under copyright law: that is to
say, a work containing the Library or a portion of it, either verbatim or with modifications and/or translated
straightforwardly into another language. (Hereinafter, translation is included without limitation in the term
"modification".)
"Source code" for a work means the preferred form of the work for making modifications to it. For a library,
complete source code means all the source code for all modules it contains, plus any associated interface definition files, plus the scripts used to control compilation and installation of the library.
Activities other than copying, distribution and modification are not covered by this License; they are outside
its scope. The act of running a program using the Library is not restricted, and output from such a program is
covered only if its contents constitute a work based on the Library (independent of the use of the Library in a
tool for writing it). Whether that is true depends on what the Library does and what the program that uses the
Library does.
1. You may copy and distribute verbatim copies of the Library's complete source code as you receive it, in any
medium, provided that you conspicuously and appropriately publish on each copy an appropriate copyright
notice and disclaimer of warranty; keep intact all the notices that refer to this License and to the absence of
any warranty; and distribute a copy of this License along with the Library.
130
Gigaset E630A GO / LUG_GO AU en / A31008-M2725-C401-1-7619 / licence.fm / 11/8/17
Template Go, Version 1, 01.07.2014 / ModuleVersion 1.0
Open Source Software
You may charge a fee for the physical act of transferring a copy, and you may at your option offer warranty protection in exchange for a fee.
2. You may modify your copy or copies of the Library or any portion of it, thus forming a work based on the
Library, and copy and distribute such modifications or work under the terms of Section 1 above, provided that
you also meet all of these conditions:
a) The modified work must itself be a software library.
b) You must cause the files modified to carry prominent notices stating that you changed the files and the date
of any change.
c) You must cause the whole of the work to be licensed at no charge to all third parties under the terms of this
License.
d) If a facility in the modified Library refers to a function or a table of data to be supplied by an application program that uses the facility, other than as an argument passed when the facility is invoked, then you must make
a good faith effort to ensure that, in the event an application does not supply such function or table, the facility
still operates, and performs whatever part of its purpose remains meaningful.
(For example, a function in a library to compute square roots has a purpose that is entirely well-defined independent of the application. Therefore, Subsection 2d requires that any application-supplied function or table
used by this function must be optional: if the application does not supply it, the square root function must still
compute square roots.)
These requirements apply to the modified work as a whole. If identifiable sections of that work are not derived
from the Library, and can be reasonably considered independent and separate works in themselves, then this
License, and its terms, do not apply to those sections when you distribute them as separate works. But when
you distribute the same sections as part of a whole which is a work based on the Library, the distribution of
the whole must be on the terms of this License, whose permissions for other licensees extend to the entire
whole, and thus to each and every part regardless of who wrote it.
Thus, it is not the intent of this section to claim rights or contest your rights to work written entirely by you;
rather, the intent is to exercise the right to control the distribution of derivative or collective works based on
the Library.
In addition, mere aggregation of another work not based on the Library with the Library (or with a work based
on the Library) on a volume of a storage or distribution medium does not bring the other work under the
scope of this License.
3. You may opt to apply the terms of the ordinary GNU General Public License instead of this License to a given
copy of the Library. To do this, you must alter all the notices that refer to this License, so that they refer to the
ordinary GNU General Public License, version 2, instead of to this License. (If a newer version than version 2 of
the ordinary GNU General Public License has appeared, then you can specify that version instead if you wish.)
Do not make any other change in these notices.
Once this change is made in a given copy, it is irreversible for that copy, so the ordinary GNU General Public
License applies to all subsequent copies and derivative works made from that copy.
This option is useful when you wish to copy part of the code of the Library into a program that is not a library.
4. You may copy and distribute the Library (or a portion or derivative of it, under Section 2) in object code or
executable form under the terms of Sections 1 and 2 above provided that you accompany it with the complete
corresponding machine-readable source code, which must be distributed under the terms of Sections 1 and
2 above on a medium customarily used for software interchange.
If distribution of object code is made by offering access to copy from a designated place, then offering equivalent access to copy the source code from the same place satisfies the requirement to distribute the source
code, even though third parties are not compelled to copy the source along with the object code.
5. A program that contains no derivative of any portion of the Library, but is designed to work with the Library
by being compiled or linked with it, is called a "work that uses the Library". Such a work, in isolation, is not a
derivative work of the Library, and therefore falls outside the scope of this License.
However, linking a "work that uses the Library" with the Library creates an executable that is a derivative of the
Library (because it contains portions of the Library), rather than a "work that uses the library". The executable
is therefore covered by this License. Section 6 states terms for distribution of such executables.
When a "work that uses the Library" uses material from a header file that is part of the Library, the object code
for the work may be a derivative work of the Library even though the source code is not. Whether this is true
is especially significant if the work can be linked without the Library, or if the work is itself a library. The threshold for this to be true is not precisely defined by law.
If such an object file uses only numerical parameters, data structure layouts and accessors, and small macros
and small inline functions (ten lines or less in length), then the use of the object file is unrestricted, regardless
of whether it is legally a derivative work. (Executables containing this object code plus portions of the Library
will still fall under Section 6.)
131
Gigaset E630A GO / LUG_GO AU en / A31008-M2725-C401-1-7619 / licence.fm / 11/8/17
Template Go, Version 1, 01.07.2014 / ModuleVersion 1.0
Open Source Software
Otherwise, if the work is a derivative of the Library, you may distribute the object code for the work under the
terms of Section 6. Any executables containing that work also fall under Section 6, whether or not they are
linked directly with the Library itself.
6. As an exception to the Sections above, you may also combine or link a "work that uses the Library" with the
Library to produce a work containing portions of the Library, and distribute that work under terms of your
choice, provided that the terms permit modification of the work for the customer's own use and reverse engineering for debugging such modifications.
You must give prominent notice with each copy of the work that the Library is used in it and that the Library
and its use are covered by this License. You must supply a copy of this License. If the work during execution
displays copyright notices, you must include the copyright notice for the Library among them, as well as a reference directing the user to the copy of this License. Also, you must do one of these things:
a) Accompany the work with the complete corresponding machine-readable source code for the Library
including whatever changes were used in the work (which must be distributed under Sections 1 and 2 above);
and, if the work is an executable linked with the Library, with the complete machine-readable "work that uses
the Library", as object code and/or source code, so that the user can modify the Library and then relink to produce a modified executable containing the modified Library. (It is understood that the user who changes the
contents of definitions files in the Library will not necessarily be able to recompile the application to use the
modified definitions.)
b) Use a suitable shared library mechanism for linking with the Library. A suitable mechanism is one that (1)
uses at run time a copy of the library already present on the user's computer system, rather than copying
library functions into the executable, and (2) will operate properly with a modified version of the library, if the
user installs one, as long as the modified version is interface-compatible with the version that the work was
made with.
c) Accompany the work with a written offer, valid for at least three years, to give the same user the materials
specified in Subsection 6a, above, for a charge no more than the cost of performing this distribution.
d) If distribution of the work is made by offering access to copy from a designated place, offer equivalent
access to copy the above specified materials from the same place.
e) Verify that the user has already received a copy of these materials or that you have already sent this user a
copy.
For an executable, the required form of the "work that uses the Library" must include any data and utility programs needed for reproducing the executable from it. However, as a special exception, the materials to be distributed need not include anything that is normally distributed (in either source or binary form) with the major
components (compiler, kernel, and so on) of the operating system on which the executable runs, unless that
component itself accompanies the executable.
It may happen that this requirement contradicts the license restrictions of other proprietary libraries that do
not normally accompany the operating system. Such a contradiction means you cannot use both them and
the Library together in an executable that you distribute.
7. You may place library facilities that are a work based on the Library side-by-side in a single library together
with other library facilities not covered by this License, and distribute such a combined library, provided that
the separate distribution of the work based on the Library and of the other library facilities is otherwise permitted, and provided that you do these two things:
a) Accompany the combined library with a copy of the same work based on the Library, uncombined with any
other library facilities. This must be distributed under the terms of the Sections above.
b) Give prominent notice with the combined library of the fact that part of it is a work based on the Library,
and explaining where to find the accompanying uncombined form of the same work.
8. You may not copy, modify, sublicense, link with, or distribute the Library except as expressly provided under
this License. Any attempt otherwise to copy, modify, sublicense, link with, or distribute the Library is void, and
will automatically terminate your rights under this License. However, parties who have received copies, or
rights, from you under this License will not have their licenses terminated so long as such parties remain in full
compliance.
9. You are not required to accept this License, since you have not signed it. However, nothing else grants you
permission to modify or distribute the Library or its derivative works. These actions are prohibited by law if you
do not accept this License. Therefore, by modifying or distributing the Library (or any work based on the
Library), you indicate your acceptance of this License to do so, and all its terms and conditions for copying, distributing or modifying the Library or works based on it.
10. Each time you redistribute the Library (or any work based on the Library), the recipient automatically
receives a license from the original licensor to copy, distribute, link with or modify the Library subject to these
terms and conditions. You may not impose any further restrictions on the recipients' exercise of the rights
granted herein. You are not responsible for enforcing compliance by third parties with this License.
132
Gigaset E630A GO / LUG_GO AU en / A31008-M2725-C401-1-7619 / licence.fm / 11/8/17
Open Source Software
Template Go, Version 1, 01.07.2014 / ModuleVersion 1.0
11. If, as a consequence of a court judgment or allegation of patent infringement or for any other reason (not
limited to patent issues), conditions are imposed on you (whether by court order, agreement or otherwise)
that contradict the conditions of this License, they do not excuse you from the conditions of this License. If you
cannot distribute so as to satisfy simultaneously your obligations under this License and any other pertinent
obligations, then as a consequence you may not distribute the Library at all. For example, if a patent license
would not permit royalty-free redistribution of the Library by all those who receive copies directly or indirectly
through you, then the only way you could satisfy both it and this License would be to refrain entirely from distribution of the Library.
If any portion of this section is held invalid or unenforceable under any particular circumstance, the balance
of the section is intended to apply, and the section as a whole is intended to apply in other circumstances.
It is not the purpose of this section to induce you to infringe any patents or other property right claims or to
contest validity of any such claims; this section has the sole purpose of protecting the integrity of the free software distribution system which is implemented by public license practices. Many people have made generous
contributions to the wide range of software distributed through that system in reliance on consistent application of that system; it is up to the author/donor to decide if he or she is willing to distribute software through
any other system and a licensee cannot impose that choice.
This section is intended to make thoroughly clear what is believed to be a consequence of the rest of this
License.
12. If the distribution and/or use of the Library is restricted in certain countries either by patents or by copyrighted interfaces, the original copyright holder who places the Library under this License may add an explicit
geographical distribution limitation excluding those countries, so that distribution is permitted only in or
among countries not thus excluded. In such case, this License incorporates the limitation as if written in the
body of this License.
13. The Free Software Foundation may publish revised and/or new versions of the Lesser General Public
License from time to time. Such new versions will be similar in spirit to the present version, but may differ in
detail to address new problems or concerns.
Each version is given a distinguishing version number. If the Library specifies a version number of this License
which applies to it and "any later version", you have the option of following the terms and conditions either of
that version or of any later version published by the Free Software Foundation. If the Library does not specify
a license version number, you may choose any version ever published by the Free Software Foundation.
14. If you wish to incorporate parts of the Library into other free programs whose distribution conditions are
incompatible with these, write to the author to ask for permission. For software which is copyrighted by the
Free Software Foundation, write to the Free Software Foundation; we sometimes make exceptions for this. Our
decision will be guided by the two goals of preserving the free status of all derivatives of our free software and
of promoting the sharing and reuse of software generally.
NO WARRANTY
15. BECAUSE THE LIBRARY IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY FOR THE LIBRARY, TO THE
EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT
HOLDERS AND/OR OTHER PARTIES PROVIDE THE LIBRARY "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER
EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE
LIBRARY IS WITH YOU. SHOULD THE LIBRARY PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY
SERVICING, REPAIR OR CORRECTION.
16. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL ANY COPYRIGHT
HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR REDISTRIBUTE THE LIBRARY AS PERMITTED
ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE LIBRARY (INCLUDING BUT NOT LIMITED
TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES
OR A FAILURE OF THE LIBRARY TO OPERATE WITH ANY OTHER SOFTWARE), EVEN IF SUCH HOLDER OR OTHER
PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
END OF TERMS AND CONDITIONS
133
Gigaset E630A GO / LUG_GO AU en / A31008-M2725-C401-1-7619 / licence.fm / 11/8/17
Open Source Software
Template Go, Version 1, 01.07.2014 / ModuleVersion 1.0
How to Apply These Terms to Your New Libraries
If you develop a new library, and you want it to be of the greatest possible use to the public, we recommend
making it free software that everyone can redistribute and change. You can do so by permitting redistribution
under these terms (or, alternatively, under the terms of the ordinary General Public License).
To apply these terms, attach the following notices to the library. It is safest to attach them to the start of each
source file to most effectively convey the exclusion of warranty; and each file should have at least the "copyright" line and a pointer to where the full notice is found.
<one line to give the library's name and a brief idea of what it does.>
Copyright (C) <year> <name of author>
This library is free software; you can redistribute it and/or modify it under the terms of the GNU Lesser General
Public License as published by the Free Software Foundation; either version 2.1 of the License, or (at your
option) any later version.
This library is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the
implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU Lesser General
Public License for more details.
You should have received a copy of the GNU Lesser General Public License along with this library; if not, write
to the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
Also add information on how to contact you by electronic and paper mail.
You should also get your employer (if you work as a programmer) or your school, if any, to sign a "copyright
disclaimer" for the library, if necessary. Here is a sample; alter the names:
Yoyodyne, Inc., hereby disclaims all copyright interest in the library `Frob' (a library for tweaking knobs) written
by James Random Hacker.
<signature of Ty Coon>, 1 April 1990
Ty Coon, President of Vice
That's all there is to it!
134
Gigaset E630A GO / LUG_GO AU en / A31008-M2725-C401-1-7619 / Cover_back_c.fm / 11/8/17
Issued by
Gigaset Communications GmbH
Frankenstr. 2a, D-46395 Bocholt
© Gigaset Communications GmbH 2017
Subject to availability.
All rights reserved. Rights of modification reserved.
www.gigaset.com
Apple, the Apple logo and iPhone are trademarks of Apple Inc., registered in the U.S. and
other countries. App Store is a service mark of Apple Inc.
Template Go, Version 1, 01.07.2014
Google, Android, Google Play and other brands are trademarks of Google Inc.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising