Gigaset | Smart Speaker L800HX | User guide | Gigaset Smart Speaker L800HX User guide

Gigaset Smart Speaker L800HX User guide
Gigaset Smart Speaker L800HX / LUG IE-UK en / A31008-N2564-R101-2-4N19 / Cover_front_bw.fm / 6/3/19
Smart Speaker
L800 HX
The latest user guide
can be found at
www.gigaset.com/manuals
Gigaset Smart Speaker L800HX / IE-UK / A31008-N2564-R101-2-4N19 / Cover_front_bw.fm / 6/3/19
Gigaset Smart Speaker L800HX / LUG IE-UK en / A31008-N2564-R101-2-4N19 / ManereoIVZ.fm / 6/3/19
Contents
Contents
Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Light ring display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3
3
4
4
Safety information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Getting started . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Setting up the Gigaset Smart Speaker . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Installing apps on a smartphone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Setting up a Gigaset Smart Speaker . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Registering with a DECT base . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Synchronising contacts with Amazon Alexa . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Using the device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Switching on and off the Gigaset Smart Speaker . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Muting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Setting the volume . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Start screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Using voice commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
14
14
14
14
15
16
Making calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Making a call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Incoming calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Ending a call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Making internal calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
16
16
17
17
17
Listening to music . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Selecting your own music source . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Playing music . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Template Module, Version 1.2, 11.09.2018
Additional functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Sending and receiving voice messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Drop In – talk to another device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Device configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Setting handset names . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Enabling/disabling the phone function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Changing the password . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Updating firmware . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Restarting/resetting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
De-registering the Gigaset Smart Speaker . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
de en es fr it
22
22
23
23
24
24
25
25
1
Gigaset Smart Speaker L800HX / LUG IE-UK en / A31008-N2564-R101-2-4N19 / ManereoIVZ.fm / 6/3/19
Contents
Appendix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Questions and answers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Service (Customer Care) - United Kingdom and Ireland . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Guarantee Certificate - United Kingdom and Ireland . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Manufacturer‘s advice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Environment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Care . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Contact with liquid . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Open Source Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Technical details . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
26
26
27
27
28
29
29
29
30
31
Illustration in the user guide
Warnings, the non-adherence to which can result in damage to devices or personal
injury.
Important information regarding function and appropriate handling or functions
that could generate costs.
Prerequisite for carrying out the following action.
Template Module, Version 1.2, 11.09.2018,
Additional helpful information.
2
de en es fr it
Gigaset Smart Speaker L800HX / LUG IE-UK en / A31008-N2564-R101-2-4N19 / overview.fm / 11/5/19
Overview
Overview
Controls
1
2
3
4
5
6
1
Mode button
Switch between WiFi, Bluetooth and
Audio modes
2
Phone button
Accept/end call
Enter voice commands without activation word (Alexa)
When an alarm sounds: switch off
3
Volume button +
Gradual increase
Template Module, Version 1.2, 11.09.2018
Continuous decrease
4
Volume button -
5
Mute button
Gradual decrease
Continuous decrease
6
Enable/disable the microphone
Light ring: indicates different modes
de en es fr it
¤
Press briefly
¤
¤
Press briefly
¤
¤
¤
¤
¤
¤
Press and hold
Press and hold
Press briefly
Press and hold
Press briefly
Press and hold
Press briefly
¢ page 4
3
Gigaset Smart Speaker L800HX / LUG IE-UK en / A31008-N2564-R101-2-4N19 / overview.fm / 11/5/19
Overview
Connectors
DC IN
AUX
RESET
1
2
3
1
DC IN
Power connector
2
AUX
AUX input, for connecting an audio device such as an Internet radio
For playing audio content: Gigaset Smart Speaker Use the Mode button
to set Audio mode (¢ page 18)
3
RESET
Register/reset button
Changing the Gigaset Smart Speaker to Register
mode:
Resetting the Gigaset Smart Speaker to the default
settings:
¤
Press briefly
¤
Press and hold
Light ring display
The light ring indicates different modes. The colour depends on the mode set.
General
Off
Template Module, Version 1.2, 11.09.2018,
Blue/cyan
Cyan
Blue/white
Yellow
Red (all modes)
Red
White (WiFi)
Blue (Bluetooth)
Green/white
(audio)
4
Gigaset Smart Speaker ready, but currently
no activity or switched off
Cyan rotates in the blue ring The Gigaset Smart Speaker is started
Flashes quickly
The Gigaset Smart Speaker is reset to the
default settings
Flashes quickly
The Gigaset Smart Speaker is ready for set-up
Flashes quickly
Firmware being updated
On
Microphone off
Flashing
Log-in to Amazon failed
On
Volume button (+/-) pressed
Intensity depends on the volume currently set
de en es fr it
Gigaset Smart Speaker L800HX / LUG IE-UK en / A31008-N2564-R101-2-4N19 / overview.fm / 11/5/19
Overview
WiFi
White
White
Flashing
On for 3 seconds, then off
White/blue
Flashes alternately quickly
No WiFi connection
WiFi mode enabled, connection established
WiFi connection attempt
Bluetooth
Blue
Blue
On
Flashing
Bluetooth device connected
Bluetooth mode enabled, no connection
to a Bluetooth device
On for 3 seconds, then off
Audio mode active
On
Flashes slowly
Flashes quickly
On
Vibrates
Listening
Thinking
Speaking
Incoming message
Message not listened to available
Audio
Green/white
Alexa
Cyan
Cyan/blue
Cyan/blue
Yellow
Yellow
Making/receiving calls
Green
Green
Template Module, Version 1.2, 11.09.2018
Green
Yellow
Red/green
de en es fr it
Flashes
Rotates twice, then lights continually
On
Lights increasingly brighter
Vibrates alternately
Incoming call
Outgoing call
Conversation ongoing
Incoming voice message
Gigaset Smart Speaker outside the range
of the base or not registered with the base
5
Gigaset Smart Speaker L800HX / LUG IE-UK en / A31008-N2564-R101-2-4N19 / security.fm / 6/3/19
Safety information
Safety information
Read the safety precautions and the user guide before use.
The device cannot be used in the event of a power failure. In case of a power failure it is
also not possible to make emergency calls.
Do not use the devices in environments with a potential explosion hazard
(e.g. paint shops).
The devices are not splashproof. For this reason do not install them in a damp environment such as bathrooms or shower rooms.
Use only the power adapter indicated on the device.
Whilst charging, the power socket must be easily accessible.
Remove faulty devices from use or have them repaired by our Service team, as these
could interfere with other wireless services.
Do not use the device if the display is cracked or broken. Broken glass or plastic can cause
injury to hands and face. Send the device to our Service department to be repaired.
Using your telephone may affect nearby medical equipment. Be aware of the technical
conditions in your particular environment, e.g. doctor's surgery. If you use a medical
device (e.g. a pacemaker), please contact the device manufacturer. They will be able to
advise you regarding the susceptibility of the device to external sources of high
frequency energy (for the specifications of your Gigaset product see "Technical data").
This system is not intended to be used by those (including children) who have restricted
physical, sensory or mental capabilities, or who lack experience and knowledge.
This is unless a person responsible for safety and use oversees usage or has provided the
user adequate instruction.
Active acoustic noise sources (such as televisions, radios and children’s voices) can
trigger undesired actions on the system.
In such cases, switch the microphone off or do not leave your system unattended.
Template Module, Version 1.2, 11.09.2018,
Reduction of electrical fields:
When using your system, keep a distance of 20 cm between the device and your body
because electric fields are reduced many fold by doing so.
6
de en es fr it
Gigaset Smart Speaker L800HX / LUG IE-UK en / A31008-N2564-R101-2-4N19 / starting.fm / 11/5/19
Getting started
Getting started
Setting up the Gigaset Smart Speaker
Package contents
• A Gigaset Smart Speaker L800HX
• A power adapter
• A user guide
Position the Gigaset Smart Speaker at table height to attain the best possible voice
sensitivity. The device's feet do not usually leave any marks on surfaces. However, due
to the multitude of different varnishes and polishes used on furniture, contact marks
on the surfaces cannot be completely ruled out.
Switching on the Gigaset Smart Speaker
¤
¤
Plug the power cable of the power adapter
into the socket marked DC IN 1 on the
Gigaset Smart Speaker.
Connect the power adapter 2 to the mains
supply.
. . . The Gigaset Smart Speaker is started. The
light ring lights blue with rotating cyan-coloured
strips. When the process is complete, the light
ring flashes blue and white. The device is ready
but does not yet have a connection.
1
2
Template Module, Version 1.2, 11.09.2018
It takes about 45 seconds for the system to start.
de en es fr it
7
Gigaset Smart Speaker L800HX / LUG IE-UK en / A31008-N2564-R101-2-4N19 / starting.fm / 11/5/19
Getting started
Installing apps on a smartphone
To use all of the functionality of your Gigaset Smart Speaker, you must install the Gigaset
L800HX and Amazon Alexa apps on your smartphone and set up an Alexa account.
If you already have an Amazon account, you need the access details for it.
¤
¤
Open App Store (iOS) or Google Play (Android) on
your smartphone
Search for, download and install the Amazon Alexa
app
Amazon Alexa app
You need Amazon Alexa to manage your contacts. You can also use it to set up additional Alexa
skills and the Alexa Drop In function. The Gigaset L800HX app is used to set up the Gigaset
Smart Speaker.
¤
Start the Amazon Alexa
app
If you do not have an Amazon account:
Log into your Amazon account
Create a new Amazon account
You can also set up an Amazon account from a web browser (go to www.amazon.com).
Setting up a Gigaset Smart Speaker
You can use more than one Gigaset Smart Speaker in your home network and set them up from
the Gigaset L800HX app.
¤
Start the Gigaset L800HX
First device:
¤
app
Tap Configure.
Additional devices: The start screen is displayed (¢ page 15) Tap
. . . The instructions for
setting up the Gigaset Smart Speaker are displayed
Template Module, Version 1.2, 11.09.2018,
Setting the password
To configure the Gigaset Smart Speaker from a different smartphone, you can set a password.
If you do not set a password, access is unprotected.
¤
Use
field
to enter the new password in the upper field
Tap Save
Specify no password:
Repeat the entry in the lower
Tap Skip
Set password later: ¢ page 24
Make a note of the password. You need it if you want to use the device from a
different smartphone. If you forget the password, you have to reset the Gigaset
Smart Speaker to the default settings (¢ page 25).
8
de en es fr it
Gigaset Smart Speaker L800HX / LUG IE-UK en / A31008-N2564-R101-2-4N19 / starting.fm / 11/5/19
Getting started
Connecting the Gigaset Smart Speaker to the WiFi
Establish a WiFi connection between the Gigaset L800HX app and the Gigaset Smart Speaker
L800HX.
When the light ring flashes alternately blue and white, the device is in WiFi registration mode.
¤
If not: Briefly press the RESET button on the Gigaset Smart
Speaker . . .
Android:
¤
¤
¤
From the app, tap Open Settings . . . The network configuration of the smartphone is opened and the WiFi signals
within range are listed
Wait until the WiFi of the Gigaset Smart Speaker is shown in the network list (e.g. Gigaset_L800HX_C2E27A) Tap the WiFi . . . The smartphone is connected to the Gigaset Smart
Speaker and the app language changes to the system language
Continue with
If the following message is displayed:
This network has no Internet access. Stay connected?
¤
Select option Don't ask again for this network
Confirm with Yes
For some older smartphone models, Mobile data needs to be disabled during
set-up.
iOS:
¤
¤
Template Module, Version 1.2, 11.09.2018
¤
Press the Home button on the smartphone
device settings.
Open the WiFi configuration from the default
Select the Gigaset Smart Speaker WiFi (e.g. Gigaset_L800HX_C2E27A) . . . The smartphone is
connected to the Gigaset Smart Speaker
Back to the Gigaset L800HX app
de en es fr it
Next
9
Gigaset Smart Speaker L800HX / LUG IE-UK en / A31008-N2564-R101-2-4N19 / starting.fm / 11/5/19
Getting started
Connecting to the Internet
The configuration of the Gigaset Smart Speaker is displayed.
You now need to connect the device to the Internet via the
router of your home network.
¤
¤
Tap
next to Wi-Fi name . . . The WiFis within range are
displayed Select a WiFi
Refresh the list: Tap
Tap field Password
Use
to enter a password for the
WiFi Save Accept the WiFi configuration with
Confirm . . . The WiFi connection is established
When the connection is established, a message will be
displayed.
¤
Confirm the message with OK . . . The configuration is
concluded
Speaker Setup
Speaker Name:
Manual Configuration
Connect speaker to a Wi-Fi network
Wi-Fi name:
WiFi_1234567:
Wi-Fi password:
Password:
Remember this Network
Changing the name of the Gigaset Smart Speaker:
¤
Tap
next to the name
name
Use
Use
to delete the old
to enter the new name
Tap
Changing the device name later: ¢ page 22
Save
Option Remember this Network enabled:
The WiFi configuration is not affected. If you restart the Gigaset Smart Speaker,
it registers automatically again with the same Access Point.
Template Module, Version 1.2, 11.09.2018,
If you change the WiFi in your home network, you must set up the Gigaset Smart
Speaker again.
10
de en es fr it
Gigaset Smart Speaker L800HX / LUG IE-UK en / A31008-N2564-R101-2-4N19 / starting.fm / 11/5/19
Getting started
Registering with Amazon Alexa
To use the Alexa voice services with multi-language support, you must register the Gigaset
Smart Speaker with the Amazon Cloud.
The Amazon Alexa app is installed. Your smartphone is connected to the same WiFi
as the Gigaset Smart Speaker.
The Amazon Alexa login screen is displayed.
If the login screen is not displayed automatically:
¤
¤
¤
On the start screen of the Gigaset L800HX app, tap
tap Amazon Alexa SIGN IN WITH AMAZON
Under Voice Assistant,
With
, enter the register details Sign In . . . The Language Preference screen is
displayed with all available app languages
Select the language Tap Done in the header . . . The Gigaset Smart Speaker is registered
with the Amazon Cloud
The Things to try screen is opened. You can now use the Gigaset Smart Speaker to test the functions of Amazon Alexa, such as ask questions and query the latest messages.
For more information on this
Complete set-up:
Changing the settings:
¤
¤
Help to Amazon Alexa.
Tap Done in the header
Tap Back in the header
Set-up of your Gigaset Smart Speaker is now complete. The start screen is displayed
(¢ page 15).
You can now see the Gigaset Smart Speaker in the device list of Amazon Alexa.
You are registered with the same Amazon account as for the Gigaset Smart Speaker
registration with the Amazon Alexa app.
¤
Open the Amazon Alexa
app
Tap
in the bottom right
All Devices . . .
The Gigaset Smart Speakers configured are listed with their names
Template Module, Version 1.2, 11.09.2018
Show device information:
Tap the device name
You can also control with Amazon Alexa the Gigaset elements Alarm system using
a voice command. For information on this www.gigaset.com/amazon-alexa
de en es fr it
11
Gigaset Smart Speaker L800HX / LUG IE-UK en / A31008-N2564-R101-2-4N19 / starting.fm / 11/5/19
Getting started
Registering with a DECT base
Using the Gigaset Smart Speaker, you can make/receive calls and send messages over your landline using voice commands. For this, the Gigaset Smart Speaker must be connected to a DECT
phone base or a router that supports DECT.
The DECT base is switched on and connected to the phone network. The Gigaset
Smart Speaker is within range of the base.
¤
¤
Open the Gigaset L800HX
Tap
app on the smartphone . . . The start screen is displayed
. . . The Settings screen is opened
Registration
phone base (on a Gigaset base, the default is 0000)
¤
Use
to enter the PIN of the
Sign In . . . A search is performed for a
DECT base in register mode
Switch the phone base to register mode. On a Gigaset base, press the Register (Paging)
button for at least 5 seconds . . . Registered is displayed if registration is successful
For more information on this
refer to the documentation for your phone base.
You can now use your Gigaset Smart Speaker for making and receiving calls.
You must specify the full number for this, such as: “Alexa, call 0123456789”.
The Gigaset Smart Speaker is registered like a handset with the DECT base and is
assigned an internal name. The default names on a Gigaset base are INT1 to INT6
for example.
The number of handsets that can be registered with a base at the same time is
dependent on the base. If the maximum number of handsets is already registered with
a base, no registration is possible. De-register another handset as required.
Template Module, Version 1.2, 11.09.2018,
For detailed information on this
or handset
12
refer to the user guide for your phone base
de en es fr it
Gigaset Smart Speaker L800HX / LUG IE-UK en / A31008-N2564-R101-2-4N19 / starting.fm / 11/5/19
Getting started
Synchronising contacts with Amazon Alexa
To use a voice command to call somebody from your contact list or to send this person a
message, the contacts from the directory on your smartphone must be synchronised with the
Amazon Cloud. Only synchronised contacts can be called.
For this, configure the following settings in the Alexa app:
¤
Open the Amazon Alexa
app
Smart Speaker is also registered
Log into the Amazon account with which the Gigaset
If the Gigaset Smart Speaker is the first device operated from your smartphone with the Alexa
app, you must verify your mobile number.
¤
Tap
. . . The Set-up assistant is opened
Follow the instructions on the screen and enter
the phone number of your smartphone . . . You receive a text message with the verification
¤
code
Enter the verification code in the Alexa app Set the authorisations
Alexa requires the authorisation to import all your local contacts. The local contacts on your
smartphone are synchronised with your Amazon account.
Your contacts are now in the Settings menu:
Contacts
The contacts on your smartphone are now synchronised with the contacts in the Amazon
account.
Contacts are only synchronised when the app is open. So when you want to change a
contact, open the Amazon Alexa app. Synchronisation between Alexa and the smartphone can take a few minutes.
You can now call people in the contact list.
End synchronisation:
function with the switch.
Contacts
Tap
Import Contacts
Disable the
All contacts are deleted in the Alexa Cloud and are no longer available for making calls.
Template Module, Version 1.2, 11.09.2018
Once you have registered with Alexa and set up the Alexa services on your smartphone, you can use more Alexa functions in addition to making and receiving calls, as
well as make use of (potentially billable) Alexa services. For more detailed information
about all Alexa functions
Help to Amazon Alexa.
de en es fr it
13
Gigaset Smart Speaker L800HX / LUG IE-UK en / A31008-N2564-R101-2-4N19 / operating.fm / 11/5/19
Using the device
Using the device
Switching on and off the Gigaset Smart Speaker
The Gigaset Smart Speaker is switched on when the power cable is
plugged into DC IN and the power adapter is plugged into the
mains power.
After being switched on, the light ring lights blue with rotating
cyan-coloured strips. When the Gigaset Smart Speaker is ready, the
light ring goes out. The process takes about 45 seconds.
Switching off the Gigaset Smart Speaker:
Speaker.
Remove the power cable from the Gigaset Smart
If there is a firmware update for your Gigaset Smart Speaker, it is loaded after the
system starts. The light ring flashes yellow. Wait until the process has completed and
the device has restarted.
Muting
You can disable the microphone to protect your privacy. Alexa then accepts no more voice
commands.
¤
Press the Mute button
. . . The microphone is enabled/disabled.
The light ring lights red regardless of the mode set.
Re-enable the microphone:
Press the Mute button again
Setting the volume
Continuous adjustment of the volume for the internal Gigaset Smart Speaker is possible:
¤
Press volume button
(for louder) or
(for quieter)
or adjust the volume (on 10 levels) using voice commands:
Template Module, Version 1.2, 11.09.2018,
¤
Say: “Alexa, louder/quieter” or “Alexa, volume <1 - 10>>”
The current level is shown on the light ring by the number of LEDs on. The more LEDs light up,
the louder the volume. The colour depends on the mode set (¢ page 18). During the adjustment, the light ring rotates (clockwise for quieter, anticlockwise for louder).
Set the device to quiet at night if required. You will then not be disturbed by announcements, such as for firmware updates.
14
de en es fr it
Gigaset Smart Speaker L800HX / LUG IE-UK en / A31008-N2564-R101-2-4N19 / operating.fm / 11/5/19
Using the device
Start screen
The starting point for initial use of the Gigaset Smart Speaker,
device configuration and for playing music is the start screen
of the Gigaset app (Home).
¤
Open the Gigaset L800HX
Home
app on the smartphone . . .
The start screen is displayed
For every known Gigaset Smart Speaker, the start screen has a
field with the device name in the title, user functions and status
information.
Registered
Functions:
Open music player (¢ page 18)
Available
Settings and information (¢ page 22)
Add new Gigaset Smart Speaker (¢ page 8)
DECT status:
Registered
Not Registered
Field colour:
Dark
Bright
The Gigaset Smart Speaker is registered to a DECT base. The landline can be
used for calls.
The Gigaset Smart Speaker is not registered to a DECT base. The landline
cannot be used for calls. Gigaset Smart Speaker Register to DECT base:
¢ page 12
The Gigaset Smart Speaker is ready. The device configuration can be
accessed from this smartphone.
Status: Available
Template Module, Version 1.2, 11.09.2018
The Gigaset Smart Speaker is available in the network, but is registered to
another smartphone.
Register device to smartphone: ¢ page 22
de en es fr it
15
Gigaset Smart Speaker L800HX / LUG IE-UK en / A31008-N2564-R101-2-4N19 / operating.fm / 11/5/19
Making calls
Using voice commands
Using voice commands, you prompt Alexa to do something for you, such as initiate a call, play
music or answer a question.
• A voice command always starts with activation word “Alexa”. A tone sounds and the light ring
lights cyan. This indicates that Alexa is now listening.
• After the activation word, say what you want. There is no fixed wording for asking questions
or giving instructions. Alexa usually understands when you say certain key words. If she does
not, she asks.
The tone sounds again and the light ring flashes alternately cyan and blue. This indicates that
Alexa is working on your request.
• If you wake up Alexa unintentionally or want to cancel a process for another reason, say for
example “Alexa, stop”, “Alexa, cancel” or “Alexa, thank you”.
You can also start a conversation with Alexa without an activation word. This is useful
in loud environments for example.
¤
Press and hold the phone button
on the top of the Gigaset Smart Speaker.
Active acoustic noise sources (such as televisions, radios, hands-free equipment and
children’s voices) can trigger undesired actions on the system.
In such cases, switch the microphone off or do not leave the Gigaset Smart Speaker
unattended.
Making calls
Making a call
The Gigaset Smart Speaker is connected to the power and the microphone is
switched on.
You initiate a call using a voice command. You can use different wording. For example:
¤
“Alexa, call Peter”
Template Module, Version 1.2, 11.09.2018,
or
¤
“Alexa, call” . . . Alexa then asks who she should call.
Initiating a call specifying the number
¤
Say for example: “Alexa, call <number>” . . . Alexa repeats the number Confirm the
number with “Yes” or “OK” . . . The Gigaset Smart Speaker initiates the call via the phone base
connected
You can also dial emergency numbers, such as: “Alexa, call 112”.
16
de en es fr it
Gigaset Smart Speaker L800HX / LUG IE-UK en / A31008-N2564-R101-2-4N19 / operating.fm / 11/5/19
Making calls
Initiating a call specifying a name
The number to call is in the contact list and the contact list is synchronised with the
Amazon account (¢ page 13).
¤
Say for example: “Alexa, call <name>”
<Name> can be a first name, last name or both.
If there is more than one similar-sounding name in the contacts, Alexa asks which one she
should call.
If a contact has more than one phone number assigned, the mobile number is selected by
default.
Using another number:
¤
Say for example: “Alexa, call <name> private” or “Alexa, call <name> work”
Incoming calls
When there is an incoming call, the light ring flashes green. Alexa announces the call. If the name
of the person calling is in the contact list, Alexa also says who is calling.
You can also use different wording when accepting a call. For example:
¤
“Alexa, accept call” or “Alexa, pick up””
Accepting and rejecting calls
¤
¤
Say for example: “Alexa, accept call”
Say for example: “Alexa, reject”
Ending a call
¤ Say for example: “Alexa, replace handset” or “Alexa, reject”
Making internal calls
Template Module, Version 1.2, 11.09.2018
It is possible to make internal calls to other handsets registered to the same phone basis (a
maximum of five).
An internal name is assigned to the handset (¢ page 23).
Calling a handset
¤
Say for example: “Alexa, call <name>”
<Name> here is the name of the handset as entered in the handset list.
de en es fr it
17
Gigaset Smart Speaker L800HX / LUG IE-UK en / A31008-N2564-R101-2-4N19 / operating.fm / 11/5/19
Listening to music
Listening to music
You can use the Gigaset Smart Speaker for audio streaming services (Internet radio, Amazon
Music, Alexa Music & Audio), tracks and radio stations. You might have to pay for the services
required.
¤
Say for example: “Alexa, play <track>” . . . The track is played via the Gigaset Smart Speaker
or
¤
Say for example: “Alexa, start <radio station>” . . . The schedule of the required radio station
is streamed by the Gigaset Smart Speaker
Using the
¤
¤
¤
music service
Open the Amazon Alexa
app
Smart Speaker is also registered
Settings
Music
Log into the Amazon account with which the Gigaset
Connect Spotify account
Tap CHOOSE DEFAULT MUSIC SERVICES
Select Spotify
DONE
Use your phone, tablet or computer as a remote control for Spotify. Go to
www.spotify.com/connect to learn how.
The Spotify software is subject to third party licences found here:
www.spotify.com/connect/third-party-licenses
Selecting your own music source
You can also use the Gigaset Smart Speaker to playback audio information from your own
different sources, such as the internal storage of your smartphone, and audio devices in the
network or connected via cable or Bluetooth.
Setting the mode
Template Module, Version 1.2, 11.09.2018,
Switch the Gigaset Smart Speaker to the relevant mode depending on the source of the music.
Modus
Function
WiFi
Audio signals are sent over the WiFi, such as when you want White
to play music files in the internal memory of your smartphone or another device on your network.
Bluetooth
Audio signals are sent over Bluetooth. Establish a Bluetooth Blue
link to the audio device.
Audio
Audio signals are sent over an audio cable. Connect the
audio device to the AUX connector of the Gigaset Smart
Speaker.
¤
Press the mode button
Light ring
colour
Green/white
. . . The mode is changed, the colour of the light ring indicates
the mode currently set.
18
de en es fr it
Gigaset Smart Speaker L800HX / LUG IE-UK en / A31008-N2564-R101-2-4N19 / operating.fm / 11/5/19
Listening to music
Connecting an audio device via cable
¤
Connect the audio device to the connector marked AUX on the
back of the Gigaset Smart Speaker (¢ page 4).
Setting the mode:
¤
Keep the mode button
pressed until the light ring lights
green and white.
The light ring goes out after about 3 seconds. You can now play music from the connected
device with the Gigaset Smart Speaker.
Connecting an audio device via Bluetooth
Setting the mode:
¤
¤
Keep the mode button
pressed until the light ring lights blue.
Start the pairing process on the Bluetooth device.
For more information on this refer to the documentation for your audio device
You can now play music from the connected Bluetooth device with the Gigaset Smart Speaker
L800HX.
Playing music
¤ Open the Gigaset L800HX app on the smartphone . . . The start screen is displayed
¤ Tap
. . . The playback screen is opened Tap Sources . . . The screen with the possible
music sources is opened for playing over the Gigaset Smart Speaker
Select the required
source
Sources
Local Content
In WiFi mode: Directories in the internal memory or on the SD card of your
smartphone that contain music are displayed.
¤
Template Module, Version 1.2, 11.09.2018
Network Devices/
Players
Select a track
Devices on the network with a music server are displayed.
¤
Select a device
Select a track
The music track selected or the audio signal of the music source is played.
de en es fr it
19
Gigaset Smart Speaker L800HX / LUG IE-UK en / A31008-N2564-R101-2-4N19 / operating.fm / 11/5/19
Additional functions
Information and settings for playback
1
Return to start screen
2 Image for the music track played as provided by
the music source, such as an album cover or logo
of the radio station
3 Information about the music source, such as track,
artist, album or radio station
4
1
Gigaset_L800HX_C2A674
2
Enabled: Shuffle mode
Enabled: Repeat the track
5 Duration of the current playback and progress
display
Change playback position
Track
3
6 Controls
Back to the last track / forwards to the
next track
Pause/resume playback
Artist
Album
4
5
6
Sources
Enable/disable the speaker
Change the volume
An incoming call interrupts playback and you can accept the call. When you end the
call, the Gigaset Smart Speaker resumes the playback.
Additional functions
Sending and receiving voice messages
You can send voice messages to a contact and receive voice messages.
Contacts to whom you want to send voice messages must be registered for Alexa
message sending.
Template Module, Version 1.2, 11.09.2018,
For more information on this
refer to the Amazon Alexa documentation.
Sending a voice message
¤
20
Say for example: “Alexa, send a voice message to <name>” . . . Alexa prompts you to enter
the voice message Record the message . . . After a short time of silence, Alexa prompts for
a confirmation to send the message Confirm with “Yes” . . . The message is sent
de en es fr it
Gigaset Smart Speaker L800HX / LUG IE-UK en / A31008-N2564-R101-2-4N19 / operating.fm / 11/5/19
Additional functions
Listening to a voice message
If a new voice message has arrived, the light ring pulsates yellow.
¤
Say for example: “Alexa, listen to the voice message” . . . The sender of the message is
announced, followed by the voice message
If there are no new messages, the old messages can be announced.
To delete voice messages, use the Amazon Alexa app.
Drop In – talk to another device
You can use the Drop-in function to connect to other Gigaset Smart Speakers or drop-in capable
devices in your network or the devices of your contacts..
The Drop In function enables you to communicate directly with friends and family members.
Drop In must be enabled in the Amazon Alexa app on every Gigaset Smart Speaker
in your network, or of the contacts whose Gigaset Smart Speakers you want to
connect to.
For more information on this
¤
refer to the Amazon Alexa documentation.
Say for example: “Alexa, listen in to <name>” or “Alexa, immediate connection to <name>”
or “Alexa, drop in on <name”
<Name> is the name of the Gigaset Smart Speaker or the contact who has approved the Drop In.
Once the connection is established, you can speak to each other using the speakers and microphones of the two devices.
Changing the default name of the Gigaset Smart Speaker (¢ page 22).
Ascertaining which devices are approved for Drop In:
¤
Say: “Alexa, Drop In” . . . Alexa shows a list of devices to which you can connect with Drop In
Template Module, Version 1.2, 11.09.2018
If a Gigaset Smart Speaker is muted, Drop In is rejected.
de en es fr it
21
Gigaset Smart Speaker L800HX / LUG IE-UK en / A31008-N2564-R101-2-4N19 / settings.fm / 11/5/19
Settings
Settings
The Gigaset L800HX app on the smartphone is used to configure settings.
Device configuration
Showing the device configuration
¤
Open the Gigaset L800HX
displayed
Tap
app on the smartphone . . . The start screen is
. . . The Settings screen is opened
Information
The following information about the Gigaset Smart Speaker is displayed:
Device Name, IP Address, System Firmware, Host Firmware and DECT Version
Changing the device name
¤
Tap
next to the name
name
Tap
Use
to delete the old name
Use
to enter the new
Enabling the device configuration
A Gigaset Smart Speaker that is in your home network but not
yet registered to your smartphone (because for example it was
set up with a different smartphone) is shown on the start
screen with a light grey field (¢ page 15).
Available
You can enable the configuration of this Gigaset Smart
Speaker from your smartphone. The device password (if specified) is required for this.
Template Module, Version 1.2, 11.09.2018,
¤
¤
22
Open the Gigaset L800HX
app on the smartphone . . . The start screen is displayed
Tap the field of the Gigaset Smart Speaker you want to register with your smartphone . . .
The Security Check screen is opened Enter the password Save . . . The device is shown
on the start screen with a dark grey field. You now have access to the Gigaset Smart Speaker
from your smartphone.
de en es fr it
Gigaset Smart Speaker L800HX / LUG IE-UK en / A31008-N2564-R101-2-4N19 / settings.fm / 11/5/19
Settings
Setting handset names
To initiate an internal call to a handset registered with the phone base (¢ page 17), you must
give names to the handsets. Names are entered in the contact list on the smartphone.
¤
¤
¤
Open the Gigaset L800HX
Tap
app on the smartphone . . . The start screen is displayed
. . . The Settings screen is opened
Internal Handsets . . . A list of handsets with
the default names (e.g. INT1 – INT6) is displayed
Tap the field of a handset Use
to enter the name for the handset Save . . .
The handset is entered into the contact list with the name specified and with an internal
number (e.g. 1111111115)
You can now call the handset using the following voice command for example (¢ page 16):
¤
“Alexa, call the living room”
Deleting/changing a name:
¤
¤
Delete the name in the field using
or use
to enter a different name
Delete the contact from the contact list
The names you give the handsets from the app are not synchronised with the names
set in the base for the handsets. So ensure you use the same names.
You can, on a handset and many phone bases, determine which handsets are registered with the phone base under which names. The default names on a Gigaset base
are INT1 to INT6 for example.
For detailed information on this
refer to the user guide for your phone base or handset
Enabling/disabling the phone function
The phone function of the Gigaset Smart Speaker is enabled by default. If you only want to use
the Gigaset Smart Speaker to listen to music, you can disable the phone function.
¤
¤
Open the Gigaset L800HX
Tap
Features
app on the smartphone . . . The start screen is displayed
. . . The Settings screen is opened
Advanced
OFF
ON
Enable/disable the Telephony function with the
Template Module, Version 1.2, 11.09.2018
switch
de en es fr it
23
Gigaset Smart Speaker L800HX / LUG IE-UK en / A31008-N2564-R101-2-4N19 / settings.fm / 11/5/19
Settings
Changing the password
The password is requested when you want to access the configuration of a Gigaset Smart
Speaker that was not set up from your smartphone (¢ page 22). If no password is set, access is
insecure.
The password can also be assigned when the Gigaset Smart Speaker (¢ page 8) is set up.
¤
Open the Gigaset L800HX
displayed
Tap
app on the smartphone . . . The start screen is
in the field of the device the password of which you want to change
The Gigaset Smart Speaker is set up from your smartphone (device in dark grey field):
. . . The Settings screen is opened
The Gigaset Smart Speaker is set up from a different smartphone (device in light grey field):
. . . The Security Check screen is opened
Settings screen is opened
¤
Enter the password with
(if set)
OK . . . The
Tap Advanced Options
Change Speaker Password Use
to enter the old
password Enter the new password Repeat the new password in the Confirm new password field Save
Changing the password of a Gigaset Smart Speaker set up from another smartphone (device is
shown in a light grey field on the start screen):
¤
Open the Gigaset L800HX
displayed
¤
Tap
app on the smartphone . . . The start screen is
in the field of the device the password of which you want to change
Enter the password with
Tap Change password
password
Use
to enter the old password
Enter the new
Repeat the new password in the Confirm new password field
Save
Make a note of the password. If you forget the password, you have to reset the
Gigaset Smart Speaker to the default settings (¢ page 25).
Template Module, Version 1.2, 11.09.2018,
Updating firmware
If new firmware is available for the Gigaset Smart Speaker, updating is automatic via OTA (overthe-air). When the Gigaset Smart Speaker is turned on and there is a connection to the Internet,
the system checks every four hours whether there is a newer firmware version. When the Gigaset
Smart Speaker is busy (with a call or is playing something), the update keeps being delayed by
10 minutes until the device is ready.
The light ring flashes yellow during this process. Then the Gigaset Smart Speaker is restarted.
Display firmware version: ¢ page 22
Critical updates, i.e. updates necessary for continued use of the Gigaset Smart
Speaker, are always downloaded ,even if the device is busy.
24
de en es fr it
Gigaset Smart Speaker L800HX / LUG IE-UK en / A31008-N2564-R101-2-4N19 / settings.fm / 11/5/19
Settings
Restarting/resetting
Restarting
If Alexa no longer responds or other errors occur, you can restart the Gigaset Smart Speaker.
¤
Unplug the power cable from the Gigaset Smart Speaker and plug it back in after a short time
. . . The device is restarted and the WiFi and DECT connections are re-established
Resetting to the default settings
If you want to pass on the Gigaset Smart Speaker to somebody else, you should reset all personal
settings.
¤
Press the RESET button for at least 15 seconds . . . The device is
restarted and all WiFi and DECT settings are reset.
De-registering the Gigaset Smart Speaker
From the DECT base
¤
¤
Open the Gigaset L800HX
app on the smartphone . . . The start screen is displayed
Tap
. . . The Settings screen is opened Tap Registration under DECT Tap Yes . . .
The link to the DECT base is disconnected and using the landline for calls is no longer possible
Registering again: ¢ page 12
From the Amazon Alexa app
¤
¤
Open the Gigaset L800HX
Tap
app on the smartphone . . . The start screen is displayed
. . . The Settings screen is opened
The Things to try screen is displayed
Tap Amazon Alexa under Voice Assistant . . .
Tap Sign out
Template Module, Version 1.2, 11.09.2018
Registering again: ¢ page 11
de en es fr it
25
Gigaset Smart Speaker L800HX / LUG IE-UK en / A31008-N2564-R101-2-4N19 / appendix_legal.fm / 11/5/19
Appendix
Appendix
Questions and answers
More solutions are available online from
www.gigaset.com/service
The device does not switch on
¥
¥
Ensure the power adapter is plugged in properly (
Inspect the power adapter for damage.
¢ page 7).
Not possible to log into the WiFi
¥ Ensure the device is within range of the WiFi. If this is not possible, register the device with another WiFi
(¢ page 8).
¥ Ensure the device supports the WiFi selected (¢ page 31).
Login to Amazon not possible
¥
¥
Ensure your iOS or Android device is connected to the Internet.
Ensure your Amazon access details were entered correctly.
Alexa does not respond
¥
¥
¢
Ensure the microphone is switched on (
page 14).
Ensure the device is logged in to Amazon Alexa (
page 11).
¢
Not possible to make calls with voice commands
¥
¥
¥
Ensure the phone base is switched on and connected to the phone network.
Position the device at table height to attain the best possible voice sensitivity.
De-register the device as a handset, and register it again (
page 25).
¢
Not possible to call a contact
¥
Ensure the contacts on your smartphone are synchronised with the Amazon account (
¢ page 13).
Not possible to play music from a Bluetooth source
¥
¥
¢
Ensure the device is in Bluetooth mode (
page 19).
Ensure the Bluetooth device is switched on and is no further than 1 metre from the Gigaset Smart Speaker
L800HX.
Nothing can be heard
Template Module, Version 1.2, 11.09.2018,
¥
¥
26
To increase the volume, press the volume button
Ensure the music source is available (
page 18).
¢
on the top of the Gigaset Smart Speaker.
de en es fr it
Gigaset Smart Speaker L800HX / LUG IE-UK en / A31008-N2564-R101-2-4N19 / appendix_legal.fm / 11/5/19
Appendix
Service (Customer Care) - United Kingdom and Ireland
Do you have any questions? As a Gigaset customer, you can take advantage of our excellent service.
You will be offered help promptly in the online user guide and on the service pages in the
Gigaset Online Portal at www.gigaset.com/service.
You can find information and various services for your Gigaset product here:
• Questions and answers (FAQ)
• Check compatibility
• Register the handset
• Contact
For advice on questions regarding installation, operation, repair and configuration as well as warranty claims:
United Kingdom
Service Hotline: 020 36953111
(local call cost charge)
Ireland
Service Hotline: 0818 200 033
(6.6561 Ct./Call)
Please have your proof of purchase ready when calling.
Please note that if the Gigaset product is not sold by authorised dealers in the national territory the product
may not be fully compatible with the national telephone network. It is clearly specified on the box near the CE
mark for which country/countries the equipment has been developed. If the equipment is used in a manner
inconsistent with this advice or with the instructions of the manual and on the product itself, this may have
implications on the conditions for warranty or guarantee claims (repair or exchange of product).
In order to make use of the warranty, the product purchaser is asked to submit a receipt which proves the date
of purchase (date from which the warranty period starts) and the type of goods that have been purchased.
Template Module, Version 1.2, 11.09.2018
Guarantee Certificate - United Kingdom and Ireland
Without prejudice to any claim the user (customer) may have in relation to the dealer or retailer, the customer
shall be granted a manufacturer’s Guarantee under the conditions set out below:
• In the case of new devices and their components exhibiting defects resulting from manufacturing and/or
material faults within 24 months of purchase, Gigaset Communications shall, at its own option and free of
charge, either replace the device with another device reflecting the current state of the art, or repair the
said device. In respect of parts subject to wear and tear (including but not limited to, batteries, keypads,
casing), this warranty shall be valid for six months from the date of purchase.
• This Guarantee shall be invalid if the device defect is attributable to improper care or use and/or failure to
comply with information contained in the user manuals. In particular claims under the Guarantee cannot
be made if:
• The device is opened (this is classed as third party intervention)
• Repairs or other work done by persons not authorised by Gigaset Communications.
• Components on the printed circuit board are manipulated
• The software is manipulated
• Defects or damage caused by dropping, breaking, lightning or ingress of moisture. This also applies if
defects or damage was caused by mechanical, chemical, radio interference or thermal factors (e.g.: microwave, sauna etc.)
• Devices fitted with accessories not authorised by Gigaset Communications
• This Guarantee shall not apply to or extend to services performed by the authorised dealer or the
customer themselves (e.g. installation, configuration, software downloads). User manuals and any software supplied on a separate data medium shall be excluded from the Guarantee.
• The purchase receipt, together with the date of purchase, shall be required as evidence for invoking the
Guarantee. Claims under the Guarantee must be submitted within two months of the Guarantee default
becoming evident.
• Ownership of devices or components replaced by and returned to Gigaset Communications shall vest in
Gigaset Communications.
de en es fr it
27
Gigaset Smart Speaker L800HX / LUG IE-UK en / A31008-N2564-R101-2-4N19 / appendix_legal.fm / 11/5/19
Appendix
•
This Guarantee shall apply to new devices purchased in the European Union. For Products sold in the
United Kingdom and in the Republic of Ireland the Guarantee is issued by: Gigaset Communications UK
Limited, 2 White Friars, Chester, CH1 1NZ.
• Any other claims resulting out of or in connection with the device shall be excluded from this Guarantee.
Nothing in this Guarantee shall attempt to limit or exclude a Customers Statutory Rights, nor the manufacturer’s liability for death or personal injury resulting from its negligence.
• The duration of the Guarantee shall not be extended by services rendered under the terms of the Guarantee.
• Insofar as no Guarantee default exists, Gigaset Communications reserves the right to charge the customer
for replacement or repair.
• The above provisions do not imply a change in the burden of proof to the detriment of the customer.
To invoke this Guarantee, please contact the Gigaset Communications helpdesk. This number is also to be
found in the accompanying user guide.
Manufacturer‘s advice
Authorisation
This device is intended for use worldwide. Use outside the European Economic Area (with the exception of
Switzerland) is subject to national approval.
Country-specific requirements have been taken into consideration.
Hereby, Gigaset Communications GmbH declares that the radio equipment type Gigaset Smart Speaker
L800HX is in compliance with Directive 2014/53/EU.
The full text of the EU declaration of conformity is available at the following internet address:
www.gigaset.com/docs.
This declaration could also be available in the "International Declarations of Conformity" or "European Declarations of Conformity" files.
Therefore please check all of these files.
The 5150 - 5350 MHz band is restricted to indoor use only for the following countries
AT
BE
BG
CH
CY
CZ
DE
DK
EE
EL
ES
FI
FR
HR
HU
IE
IS
IT
LI
LT
LU
LV
MT
NL
NO
PT
PL
RO
SE
SI
SK
TR
UK
Template Module, Version 1.2, 11.09.2018,
Data protection
We at Gigaset take the protection of our customers’ data very seriously. We ensure your data is protected and
is only used for the intended purposes in line with data protection specifications.
The full text of the privacy policy is available from: www.gigaset.com/l800hx-privacy
All of your questions are saved by Amazon (they can be viewed and deleted).
28
de en es fr it
Gigaset Smart Speaker L800HX / LUG IE-UK en / A31008-N2564-R101-2-4N19 / appendix_legal.fm / 11/5/19
Appendix
Environment
Our environmental statement
We at Gigaset Communications GmbH are aware of our social responsibility. That is why we actively take steps
to create a better world. In all areas of our business – from product planning and production to sales and waste
of disposal – following our environmental conscience in everything we do is of utmost importance to us.
Learn more about our earth-friendly products and processes online at www.gigaset.com.
Environmental management system
Gigaset Communications GmbH is certified pursuant to the international standards ISO 14001 and
ISO 9001.
ISO 14001 (Environment): Certified since September 2007 by TÜV SÜD Management Service
GmbH.
ISO 9001 (Quality): Certified since 17/02/1994 by TÜV SÜD Management Service GmbH.
Disposal
All electrical and electronic products should be disposed of separately from the municipal waste stream via
designated collection facilities appointed by the government or the local authorities.
This crossed-out wheeled bin symbol on the product means the product is covered by the European Directive 2012/19/EU.
The correct disposal and separate collection of your old appliance will help prevent potential
negative consequences for the environment and human health. It is a precondition for reuse and
recycling of used electrical and electronic equipment.
For more detailed information about disposal of your old appliance, please contact your local council refuse
centre or the original supplier of the product.
Care
Wipe the device with a damp cloth or an antistatic cloth. Do not use solvents or microfibre cloths.
Never use a dry cloth; this can cause static.
In rare cases, contact with chemical substances can cause changes to the device’s exterior. Due to the wide
variety of chemical products available on the market, it was not possible to test all substances.
Template Module, Version 1.2, 11.09.2018
Contact with liquid
If the device comes into contact with liquid:
1 Unplug all cables from the device.
2 Allow the liquid to drain from the device.
3 Pat all parts dry.
4 Place the device in a dry, warm place for at least 72 hours (not in a microwave, oven etc.) with the keypad
facing down (if applicable).
5 Do not switch on the device again until it is completely dry.
When it has fully dried out, you will normally be able to use it again.
de en es fr it
29
Gigaset Smart Speaker L800HX / LUG IE-UK en / A31008-N2564-R101-2-4N19 / appendix_legal.fm / 11/5/19
Appendix
Open Source Software
General
Your Gigaset device includes Open Source software that is subject to various license conditions.
With regard to Open Source software, the granting of usage rights that go beyond the operation
of the device in the form supplied by Gigaset Communications GmbH is governed by the relevant license conditions of the Open Source software.
The respective license texts regularly contain limitations of liability with regard to the relevant
licensor of Open Source Software. The exclusion of liability for the GPL Version 2, for example,
reads as follows:
"This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY;
without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR
PURPOSE. See the GNU General Public License for more details."
and for the LGPL Version 2.1:
"This library is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY;
without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR
PURPOSE. See the GNU Lesser General Public License for more details."
The liability of Gigaset Communications GmbH remains unaffected by this.
Licence and copyright information
Template Module, Version 1.2, 11.09.2018,
Your Gigaset unit includes Open Source software which is subject to the GNU General Public
License (GPL) or the GNU Library/Lesser General Public License (LGPL). The corresponding
licence conditions in their original version and the relevant source code can be found in the
Internet at www.gigaset.com/opensource. The appropriate source code can also be requested
from Gigaset Communications GmbH at cost price within three years of purchasing the product.
Please use the contact details provided at www.gigaset.com/service
30
de en es fr it
Gigaset Smart Speaker L800HX / LUG IE-UK en / A31008-N2564-R101-2-4N19 / appendix_technical.fm / 6/3/19
Technical details
Technical details
Technical details
Power supply
230 V ~/50 Hz
Input power
18 V
Power consumption (standby)
<= 2 W
Ambient conditions for operation
+5°C to +45°C, 20% to 75% relative humidity
2000 mA/36 W
DECT
DECT standard
Supported
GAP standard
Supported
No. of channels
60 duplex channels
Radio frequency range
1880 - 1900 MHz
Duplex mode
Time division multiplexing, 10 ms frame length
Repetition frequency of the transmission
pulse
100 Hz
Duration of the transmission pulse
370 μs
Channel grid
1728 kHz
Bit rate
1152 Kbit/s
Modulation
GFSK
Speech coding
32 Kbit/s
Transmission power
10 mW average power per channel, 250 mW pulse power
Range
Up to 50 m indoors, up to 300 m outdoors
WiFi
Standard
802.11 a/b/g/n/ac
Radio frequency range
2.4G (2400 - 2483 MHz) / 5.2 GHz (5150 - 5350 MHz)
Transmission power
2.4 GHz (802.11 b,g,n)
5.2 GHz (802.11 a)
< 100 mW EIRP
< 200 mW EIRP
Template Module, Version 1.2, 11.09.2018
Bluetooth
Radio frequency range
2402 - 2480 MHz
Transmission power
4 mW pulse power
de en es fr it
31
Gigaset Smart Speaker L800HX / LUG IE-UK en / A31008-N2564-R101-2-4N19 / ManereoSIX.fm / 6/3/19
Index
Index
A
Activation word . . . . . . . . . . . . . . . . . . . . . . . . 16
alternative phone button . . . . . . . . . . . . . . . 16
Alexa
App . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
status display . . . . . . . . . . . . . . . . . . . . . . . . 5
Amazon Alexa . . . . . . . . . . . . . . . . . . . . . . . . . . 8
de-registering . . . . . . . . . . . . . . . . . . . . 11, 25
device list . . . . . . . . . . . . . . . . . . . . . . . . . . 11
installing the app . . . . . . . . . . . . . . . . . . . . . 8
registering with. . . . . . . . . . . . . . . . . . . . . . 11
Amazon Cloud . . . . . . . . . . . . . . . . . . . . . . . . 11
App
Amazon Alexa . . . . . . . . . . . . . . . . . . . . . . . . 8
connect with device WiFi . . . . . . . . . . . . . . . . 9
start screen . . . . . . . . . . . . . . . . . . . . . . . . . 15
Audio device
connecting over a cable . . . . . . . . . . . . . . . . 19
connecting via Bluetooth . . . . . . . . . . . . . . . 19
Audio, status display . . . . . . . . . . . . . . . . . . . . . 5
Authorisation . . . . . . . . . . . . . . . . . . . . . . . . . 28
AUX input . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
B
Bluetooth
pairing . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
status display . . . . . . . . . . . . . . . . . . . . . . . . 5
Broken display. . . . . . . . . . . . . . . . . . . . . . . . . . 6
Button
increase volume . . . . . . . . . . . . . . . . . . . . . . 3
mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
mute . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
phone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
reduce volume . . . . . . . . . . . . . . . . . . . . . . . 3
Template Module, Version 1.2, 11.09.2018,
C
Call
accept . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
end . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
incoming . . . . . . . . . . . . . . . . . . . . . . . . . . 17
initiate to a contact . . . . . . . . . . . . . . . . . . . 17
initiate with number . . . . . . . . . . . . . . . . . . 16
internal . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
reject . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Calling number . . . . . . . . . . . . . . . . . . . . . . . . 16
Care . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Care of the device . . . . . . . . . . . . . . . . . . . . . . 29
Change
name of Gigaset Smart Speaker . . . . . . . 10, 22
Configuration . . . . . . . . . . . . . . . . . . . . . . 10, 22
Configuration from web interface . . . . . . . . . . . 22
Connecting the power cable. . . . . . . . . . . . . . . . 7
Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
32
Contact
call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
synchronise . . . . . . . . . . . . . . . . . . . . . . . . 13
Contact with liquid . . . . . . . . . . . . . . . . . . . . . 29
D
Data protection . . . . . . . . . . . . . . . . . . . . . . . . 28
DECT
de-registering a connection . . . . . . . . . . . . . 25
DECT base, registering with . . . . . . . . . . . . . . . 12
Default settings . . . . . . . . . . . . . . . . . . . . . . . . 25
Device list
in Amazon Alexa . . . . . . . . . . . . . . . . . . . . . 11
in Gigaset L800HX app . . . . . . . . . . . . . . . . . 15
Dial emergency number. . . . . . . . . . . . . . . . . . 16
Display
broken . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Disposal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Drop In
rejecting . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
E
Ending a call . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Enter a voice command . . . . . . . . . . . . . . . . . . 16
Environment . . . . . . . . . . . . . . . . . . . . . . . . . . 29
G
Gigaset Smart Speaker
adjusting volume . . . . . . . . . . . . . . . . . . . . 14
changing name . . . . . . . . . . . . . . . . . . . 10, 22
configuration . . . . . . . . . . . . . . . . . . . . . . . 22
de-registering from Amazon Alexa . . . . . 11, 25
de-registering from DECT. . . . . . . . . . . . . . . 25
muting . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
resetting to default settings . . . . . . . . . . . . . 25
restarting . . . . . . . . . . . . . . . . . . . . . . . . . . 25
setting up . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
switching on . . . . . . . . . . . . . . . . . . . . . . . . . 7
switching on and off . . . . . . . . . . . . . . . . . . 14
GPL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Guarantee Certificate . . . . . . . . . . . . . . . . . . . . 27
H
Handset
call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
setting names . . . . . . . . . . . . . . . . . . . . . . . 23
Home . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
I
Internet radio . . . . . . . . . . . . . . . . . . . . . . . . . 18
IP address . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
de en es fr it
Gigaset Smart Speaker L800HX / LUG IE-UK en / A31008-N2564-R101-2-4N19 / ManereoSIX.fm / 6/3/19
Index
LGPL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Light ring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Liquid . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Registering
with Alexa . . . . . . . . . . . . . . . . . . . . . . . . . 11
with DECT base . . . . . . . . . . . . . . . . . . . . . . 12
Reset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Reset button . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Restarting . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
M
S
Making calls . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Making/receiving calls . . . . . . . . . . . . . . . . . . . 16
status display . . . . . . . . . . . . . . . . . . . . . . . . 5
Medical equipment . . . . . . . . . . . . . . . . . . . . . . 6
Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
setting . . . . . . . . . . . . . . . . . . . . . . . . . 18, 19
Mode button . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Music . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
controlling playback . . . . . . . . . . . . . . . . . . 20
display information . . . . . . . . . . . . . . . . . . . 20
playback . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Mute button . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Muting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
N
Safety information . . . . . . . . . . . . . . . . . . . . . . . 6
Selecting a music source . . . . . . . . . . . . . . . . . 19
Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Setting up an Amazon account . . . . . . . . . . . . . . 8
Start screen . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Status display
Alexa . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
audio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Bluetooth . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
making/receiving calls . . . . . . . . . . . . . . . . . . 5
WiFi . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Status display, light ring . . . . . . . . . . . . . . . . . . . 4
Switch off alarm . . . . . . . . . . . . . . . . . . . . . . . . 3
Switching on . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Synchronise, contacts . . . . . . . . . . . . . . . . . . . 13
Name
setting for handsets . . . . . . . . . . . . . . . . . . . 23
T
L
Technical details
. . . . . . . . . . . . . . . . . . . . . . . 31
O
Open Source Software . . . . . . . . . . . . . . . . . . . 30
Operating display . . . . . . . . . . . . . . . . . . . . . . . 4
U
Updating firmware
automatic . . . . . . . . . . . . . . . . . . . . . . . . . . 24
P
Package contents . . . . . . . . . . . . . . . . . . . . . . . 7
Password
changing . . . . . . . . . . . . . . . . . . . . . . . . . . 24
setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Phone button . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Power adapter . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Power connector . . . . . . . . . . . . . . . . . . . . . . . . 4
V
Voice message
listening to . . . . . . . . . . . . . . . . . . . . . . . . . 21
sending . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Volume
adjusting . . . . . . . . . . . . . . . . . . . . . . . . . . 14
intensity . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Volume buttons. . . . . . . . . . . . . . . . . . . . . . . . . 3
Q
Questions and answers
. . . . . . . . . . . . . . . . . . 26
Template Module, Version 1.2, 11.09.2018
R
Register
with WiFi . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Register button . . . . . . . . . . . . . . . . . . . . . . . . . 4
W
WiFi
register mode . . . . . . . . . . . . . . . . . . . . . . . . 9
registering . . . . . . . . . . . . . . . . . . . . . . . . . . 9
status display . . . . . . . . . . . . . . . . . . . . . . . . 5
All rights reserved. Rights of modification reserved.
de en es fr it
33
Gigaset Smart Speaker L800HX / LUG IE-UK en / A31008-N2564-R101-2-4N19 / Cover_back_bw.fm / 11/4/19
Version: 05.11.2019
*A31008-N2564-R101-2-4N19*
A31008-N2564-R101-2-4N19
Issued by
Gigaset Communications GmbH
Frankenstr. 2a, 46395 Bocholt, Germany
© Gigaset Communications GmbH 2019
Subject to availability.
All rights reserved. Rights of modification reserved.
Template Module, Version 1.2, 11.09.2018
www.gigaset.com
Apple, the Apple logo and iPhone are trademarks of Apple Inc., registered in the U.S.
and other countries. App Store is a service mark of Apple Inc.
Google, Android, Google Play and other brands are trademarks of Google Inc.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising