Gefen | EXT-USB2.0-SR | manual | Gefen EXT-USB2.0-SR Gefen USB 2.0 SR Extender over one CAT-5 Cable Manual

Gefen EXT-USB2.0-SR Gefen USB 2.0 SR Extender over one CAT-5 Cable Manual
USB 2.0 SR
Extender over one CAT-5 Cable
EXT-USB2.0-SR
User Manual
Version A1
Important Safety Instructions
1.
Read these instructions.
2.
Keep these instructions.
3.
Heed all warnings.
4.
Follow all instructions.
5.
Do not use this product near water.
6.
Clean only with a dry cloth.
7.
Do not block any ventilation openings. Install in accordance with the manufacturer’s
instructions.
8.
Do not install or place this product near any heat sources such as radiators, heat registers,
stoves, or other apparatus (including amplifiers) that produce heat.
9.
Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized
plug has two blades with one wider than the other. A grounding type plug has two blades
and a third grounding prong. The wide blade or the third prong are provided for your
safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched particularly at plugs,
convenience receptacles, and the point where they exit from the apparatus.
11.
Only use attachments/accessories specified by the manufacturer.
12. To reduce the risk of electric shock and/or damage to this product, never handle or touch
this unit or power cord if your hands are wet or damp. Do not expose this
product to rain or moisture.
13.
Unplug this apparatus during lightning storms or when unused for long periods of time.
14. Refer all servicing to qualified service personnel. Servicing is required when the
apparatus has been damaged in any way, such as power-supply cord or plug is
damaged, liquid has been spilled or objects have fallen into the apparatus,
the apparatus has been exposed to rain or moisture, does not operate normally,
or has been dropped.
15.
Batteries that may be included with this product and/or accessories should never be
exposed to open flame or excessive heat. Always dispose of used batteries
according to the instructions.
2
Warranty Information
For the latest warranty coverage information, refer to the Warranty and Return Policy under
the Connect section of the Gefen Web site at http://www.gefen.com/connect/warranty-andreturn-policy
3
Contact Us
Technical Support
1-707-283-5900
1-800-472-5555
8:00 AM to 5:00 PM Monday - Friday, Pacific Time
Email
support@gefen.com
Web
http://www.gefen.com
Mailing Address
Gefen
Core Brands, LLC
c/o Customer Service
1800 S McDowell Blvd
Petaluma, CA 94954 USA
© 2017 Core Brands, LLC. All Rights Reserved.
All trademarks are the property of their respective owners.
Gefen and Core Brands, LLC reserve the right to make changes in the hardware,
packaging, and any accompanying documentation without prior notice.
4
Operating Notes
Important
The EXT-USB2.0-SR can extend USB up to a maximum of 165 ft (50m). Actual
extension distance will depend on cable quality, the use of USB hubs, and
interference from other devices nearby.
•
Using a USB hub on the output of the EXT-USB2.0-SR would reduce the extension
range to approximately 40 meters/132 feet. The exact range reduction would
depend on the USB hub design. Some hubs may perform better than others.
•
Use industry standard CAT-5e or better cables. Gefen recommends solid core cables for
best performance.
•
The USB 2.0 SR Extender is USB 2.0/1.1 compliant.
•
The included power supplies should be used on both the Sender and the Receiver units.
•
The USB 2.0 LR supports all major operating systems -- Windows, macOS, and Linux.
No software drivers are required.
•
The information in this manual has been carefully checked and is believed to be accurate.
However, Gefen and Core Brands, LLC assume no responsibility for any inaccuracies that
may be contained in this manual. In no event will Gefen and Core Brands, LLC be liable
for direct, indirect, special, incidental, or consequential damages resulting from any
defect or omission in this manual.
•
All information contained herein is subject to change without notice.
This product uses UL-Listed power supplies
5
Features & Packing List
Features*
•
Extends USB 2.0 peripherals up to 165ft (50m) away from a computer
•
Supports USB 1.1 and 2.0
•
Uses industry-standard CAT-5e or better cable
•
Supports all major operating systems -- Windows, macOS and Linux
•
True plug-and-play, 100% hardware solution with no drivers required
•
Can support the full 480 Mbps speed of USB 2.0
•
Receiver supports a powered USB connection up to 2A at 5V
•
Sturdy metal construction of the enclosures help provide immunity against
•
Electromagnetic Interference (EMI) and radiated noise (RFI)
•
Compact enclosures are easy to install and can be hidden away
Packing List*
The following items are shipped with the EXT-USB2.0-SR. If any of these items are not present
in the box when you first open it, immediately contact your dealer or Gefen.
•
•
•
•
•
(1)
(1)
(1)
(2)
(1)
USB 2.0 SR Extender - Sender Unit
USB 2.0 SR Extender - Receiver Unit
6 ft. USB Cable (A-B)
5V DC Locking Power Supplies (EXT-PS526AIP-LP-6)
Quick-Start Guide
*Features and specifications are subject to change without notice.
All trademarks and registered trademarks are properties of their respective owners.
6
Table of Contents
Introduction......................................................................................................................8
Sender Unit...............................................................................................................................8
Receiver Unit..........................................................................................................................10
Installation..................................................................................................................... 12
Connection Instructions........................................................................................................ 12
Sample Wiring Diagram........................................................................................................ 13
LED Status....................................................................................................................... 14
Specifications..................................................................................................................15
7
Introduction
Sender Unit
2
TXf
3
4
TXb
5
P
5V DC
USB 2.0 SR
L
USB In
1
Extender over one CAT-5 - Sender
RXb
P
5V DC
BSU
RXf
L
8
USB
Introduction
ID
Name
Description
1
Power
This LED indicator glows solid blue when the
unit is powered. See LED Status (page 14)
for more information.
2
Link
This LED glows solid green when a link
is established between the Sender and
Receiver. See LED Status (page 14) for
more information.
3
USB In
Connect the USB host device to this port.
4
Link
Connect an RJ-45-terminated CAT-5e or better
cable, up to 165 feet (50 meters), from this port
to the Link port on the Receiver unit.
5
5V DC
Connect one of the included 5V DC power
supplies to this connector.
9
L
USB 2.0 SRIntroduction
P
5V DC
Extender over one CAT-5 - Sender
Receiver Unit
2RXf
3
4
RXb
5
P
5V DC
BSU
1
L
USB Out
USB 2.0 SR
Extender over one CAT-5 - Receiver
10
Introduction
ID
Name
Description
1
Power
This LED indicator glows solid blue when the
unit is powered. See LED Status (page 14)
for more information.
2
Link
This LED glows solid green when a link
is established between the Sender and
Receiver. See LED Status (page 14) for
more information.
3
USB Out
Connect the USB device to this port.
4
Link
Connect an RJ-45-terminated CAT-5e or better
cable, up to 165 feet (50 meters), from this port
to the Link port on the Sender unit.
5
5V DC
Connect one of the included 5V DC power
supplies to this connector.
11
Installation
Connection Instructions
►► USB
1.
Connect the included USB cable from the USB In port of the Sender unit, to a USB host
device such as a computer.
2.
Using another USB cable, connect your USB device to the USB Out port on the Receiver
unit.
►► CAT-5
3.
Connect an RJ-45-terminated CAT-5e or better cable, up to 165 feet (50 meters), from the
Link port on the Sender to the Link port on the Receiver unit.
Important
Using a USB hub on the output of the EXT-USB2.0-SR would reduce the extension
range to approximately 40 meters/132 feet. The exact range reduction would
depend on the USB hub design. Some hubs may perform better than others.
►► Power
4.
Connect one of the included power supplies to the 5V DC connector on the Sender unit.
Connect the other power supply to the 5V DC connector on the Receiver unit.
5.
Plug both power supplies into available electrical outlets.
12
Installation
Sample Wiring Diagram
USB CABLE
CAT-5e OR BETTER CABLE
(Up To 165 FT)
Computer
Receiver
Sender
USB Peripheral
EXT-USB2.0-SR
13
LED Status
The Power and Link LED indicators on the Sender and Receiver unit provides basic
information on the current status of each unit.
The information, in the table below, applies to both the Sender and Receiver unit.
Power
Description
Solid blue
•
The Sender / Receiver unit is powered.
Off
•
Check the power supplies between the Sender and the
Receiver unit.
•
Make sure the electrical AC outlet is providing power.
Link
Description
Solid green
•
Link integrity is good between the Sender and Receiver unit.
Off
•
Make sure that the Power LEDs are ON on both Sender
and Receiver. If they are not on, go back to “Power LED Off”
troubleshooting procedure above. If both Power LEDs are on:
1.
Try a known-to-be-good short (about 6 feet) link cable.
If the link LEDs on both units turn on, then:
2.
Check the original link cable and the RJ-45 connectors
for integrity.
3.
Ensure that the original link cable is of good quality.
4.
Ensure that cable length is within specifications.
Remember that adding USB hubs will reduce extension
range.
5.
Ensure that the link cable is installed away power
lines and other source of possible Electro-Magnretic
Interference.
14
Specifications*
Supported Formats
USB
•
•
USB 2.0
USB 1.1
Link Connectors (Sender/Receiver)
•
1 x RJ-45, shielded
USB Connector (Sender)
•
1 x USB type B
USB Connector (Receiver)
•
1 x USB type A
Power Supply Connectors (Sender/Receiver)
•
Locking-type, 5.5mm barrel/2.5mm pin
Link Indicator (Sender/Receiver)
•
1 x LED, green
Power Indicator (Sender/Receiver)
•
1 x LED, blue
Power Supply Voltage (Sender/Receiver)
•
5V DC
USB Port Current Capability (Receiver)
•
2A at 5V DC
Power Consumption (Sender/Receiver)
•
0.65W / 0.8W (max.)
Operating Temperature
•
+32 to +122 ºF (0 to +50 ºC)
Operating Humidity
•
5% to 90% RH, non-condensing
Storage Temperature
•
-4 to +158 °F (-20 to +70 °C)
Storage Humidity
•
0% to 95% RH, non-condensing
MTBF
•
50000 hours
Dimensions (W x H x D)
(Sender/Receiver),
not including connectors
•
3.4” x 1.1” x 1.5” (85 mm x 28 mm x 38 mm)
Net Weight (Sender/Receiver)
•
0.3 lbs (0.13 kg) each
Shipping Weight (Sender/Receiver)
•
2.2 lbs. (1 kg)
Connectors & Indicators
Operational
Physical
* Features and specifications are subject to change without notice.
All trademarks and registered trademarks are properties of their respective owners.
Copyright© 2017 Core Brands, LLC
15
1800 S McDowell Blvd. Petaluma CA 94954, USA
1-707-283-5900 1-800-472-5555
Copyright© 2017 Core Brands, LLC.
Part Number MAN-EXT-USB2.0-SR Version A1
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising