Ikelite | Zoom / Focus Gear 5509.25 | Instruction manual | Ikelite Zoom / Focus Gear 5509.25 Instruction Manual

Ikelite Zoom / Focus Gear 5509.25 Instruction Manual
Diagram A
Zoom Gear Retainer Tool
Zoom Gear for Sony 16-35mm F2.8 GM Lens
Product Number - 5509.25
Zoom Gear
Included in the Box
• Port Gear Sleeve # 0073.6
• Zoom Clamp # 9059.9
Installation and Use
Attaching the Sleeve and Clamp to a DL Housing
1. Place Zoom Gear into the housing Port Mount opening,
with gear slots facing up.
Zoom Gear
Port Mount
2. Mesh Zoom Gear teeth with small black housing gear.
3. Tighten Zoom Gear Retainer into Port Mount using Zoom
Gear Retainer Tool. Tighten clockwise so Retainer is snug
- Diagram A. DO NOT overtighten.
Diagram B
4. Line up the two white dots on the camera face and lens,
and bayonet the lens into the camera body by rotating the
lens counterclockwise - Diagram B.
5. Gently expand and place the Clamp over the front of the
6. Line up Zoom Clamp tabs with Zoom Gear slots.
7. Push clamp down on the lens until the tabs slide into the
Zoom Clamp Tab
8. Check zoom function.
9. Install Lens Port.
Zoom Gear Slot
Limited Warranty
This Ikelite product is warranted against any manufacturing
defects for a period of one (1) year from the original date
of purchase. To obtain warranty service, the product must
be returned to Ikelite postage paid. Ikelite will, at its sole
discretion, repair or replace such products, and will return
to customer postage paid. All other claims of any nature are
not covered. Except as mentioned above, no other warranty
expressed or implied applies to this Ikelite product.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Related manuals

Download PDF