Ikelite | Zoom / Focus Gear 5509.14 | Instruction manual | Ikelite Zoom / Focus Gear 5509.14 Instruction Manual

Ikelite Zoom / Focus Gear 5509.14 Instruction Manual
Zoom Sleeve for Canon 24-70mm II Lens
Zoom Sleeve for Canon 24-70mm II Lens
Zoom Sleeve for Canon 11-24mm Lens
Zoom Sleeve for Canon 11-24mm Lens
Product Number 5509.12
Product Number 5509.14
Product Number 5509.12
Product Number 5509.14
Zoom Sleeve
Retainer Tool
Zoom Sleeve
Retainer Tool
Zoom Sleeve
Retainer
Zoom Sleeve
Retainer
Diagram A
Diagram A
Zoom Sleeve
Zoom Sleeve
Port Mount
Port Mount
Zoom Sleeve for Canon 24-70mm II Lens
Zoom Sleeve for Canon 24-70mm II Lens
Zoom Sleeve for Canon 11-24mm Lens
Zoom Sleeve for Canon 11-24mm Lens
Product Number 5509.12
Product Number 5509.14
Product Number 5509.12
Product Number 5509.14
Zoom Sleeve
Retainer Tool
Zoom Sleeve
Retainer Tool
Zoom Sleeve
Retainer
Zoom Sleeve
Retainer
Diagram A
Diagram A
Zoom Sleeve
Zoom Sleeve
Port Mount
Port Mount
Zoom Sleeve Installation
Zoom Sleeve Installation
2. Install components as shown, Diagram A.
2. Install components as shown, Diagram A.
3. Tighten Zoom Sleeve Retainer into Port Mount using Zoom
Gear Retainer Tool - Diagram B. Tighten clockwise so
Retainer is snug. DO NOT overtighten.
3. Tighten Zoom Sleeve Retainer into Port Mount using Zoom
Gear Retainer Tool - Diagram B. Tighten clockwise so
Retainer is snug. DO NOT overtighten.
4. Install lens and test zoom function - Diagram C.
4. Install lens and test zoom function - Diagram C.
1. If necessary, remove black dust cap from housing port hole
before installing Zoom Sleeve. Rotate the Zoom Sleeve
Retainer Tool counterclockwise to remove Retainer.
Diagram B
Diagram C
ikelite.com
© 2017 Ikelite Underwater Systems
1. If necessary, remove black dust cap from housing port hole
before installing Zoom Sleeve. Rotate the Zoom Sleeve
Retainer Tool counterclockwise to remove Retainer.
Diagram B
Diagram C
ikelite.com
5509.12_5509.14_Zoom_Sleeve_1-0117
© 2017 Ikelite Underwater Systems
5509.12_5509.14_Zoom_Sleeve_1-0117
Zoom Sleeve Installation
Zoom Sleeve Installation
2. Install components as shown, Diagram A.
2. Install components as shown, Diagram A.
3. Tighten Zoom Sleeve Retainer into Port Mount using Zoom
Gear Retainer Tool - Diagram B. Tighten clockwise so
Retainer is snug. DO NOT overtighten.
3. Tighten Zoom Sleeve Retainer into Port Mount using Zoom
Gear Retainer Tool - Diagram B. Tighten clockwise so
Retainer is snug. DO NOT overtighten.
4. Install lens and test zoom function - Diagram C.
4. Install lens and test zoom function - Diagram C.
1. If necessary, remove black dust cap from housing port hole
before installing Zoom Sleeve. Rotate the Zoom Sleeve
Retainer Tool counterclockwise to remove Retainer.
Diagram B
Diagram C
ikelite.com
© 2017 Ikelite Underwater Systems
1. If necessary, remove black dust cap from housing port hole
before installing Zoom Sleeve. Rotate the Zoom Sleeve
Retainer Tool counterclockwise to remove Retainer.
Diagram B
Diagram C
ikelite.com
5509.12_5509.14_Zoom_Sleeve_1-0117
© 2017 Ikelite Underwater Systems
5509.12_5509.14_Zoom_Sleeve_1-0117
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising