Ikelite | Zoom / Focus Gear 5509.32 | Instruction manual | Ikelite Zoom / Focus Gear 5509.32 Instruction Manual

Ikelite Zoom / Focus Gear 5509.32 Instruction Manual
Zoom Gear & Clamp for Sony FE 12-24mm F4G
Zoom Gear & Clamp for Sony FE 12-24mm F4G
Product Number 5509.32
Product Number 5509.32
Zoom Gear
Retainer Tool
Zoom Gear
Retainer Tool
Zoom Gear
Retainer
Zoom Gear
Retainer
Diagram A
Diagram A
Zoom Gear
Zoom Gear
Port Mount
Port Mount
Zoom Gear & Clamp for Sony FE 12-24mm F4G
Zoom Gear & Clamp for Sony FE 12-24mm F4G
Product Number 5509.32
Product Number 5509.32
Zoom Gear
Retainer Tool
Zoom Gear
Retainer Tool
Zoom Gear
Retainer
Zoom Gear
Retainer
Diagram A
Diagram A
Zoom Gear
Zoom Gear
Port Mount
Port Mount
Zoom Gear Installation
Zoom Gear Installation
2. If necessary, remove black dust cap from housing port hole
before installing Zoom Gear. Rotate the Zoom Gear Retainer Tool
counterclockwise to remove Retainer.
2. If necessary, remove black dust cap from housing port hole
before installing Zoom Gear. Rotate the Zoom Gear Retainer Tool
counterclockwise to remove Retainer.
3. Install components as shown, Diagrams A and B. Tighten Zoom
Gear Retainer clockwise so Retainer is snug. DO NOT overtighten.
3. Install components as shown, Diagrams A and B. Tighten Zoom
Gear Retainer clockwise so Retainer is snug. DO NOT overtighten.
4. Zoom Gear is a friction fit to the lens. Install lens and test zoom
function - Diagram C.
4. Zoom Gear is a friction fit to the lens. Install lens and test zoom
function - Diagram C.
5. Attach Port.
5. Attach Port.
1.
Install camera body in housing (without lens).
1.
Install camera body in housing (without lens).
Diagram C
Diagram C
Diagram B
Diagram B
© 2018 Ikelite Underwater Systems
© 2018 Ikelite Underwater Systems
ikelite.com
5509.32_Zoom_Gear_Sony_12-24_F4G_1-0218
ikelite.com
5509.32_Zoom_Gear_Sony_12-24_F4G_1-0218
Zoom Gear Installation
Zoom Gear Installation
2. If necessary, remove black dust cap from housing port hole
before installing Zoom Gear. Rotate the Zoom Gear Retainer Tool
counterclockwise to remove Retainer.
2. If necessary, remove black dust cap from housing port hole
before installing Zoom Gear. Rotate the Zoom Gear Retainer Tool
counterclockwise to remove Retainer.
3. Install components as shown, Diagrams A and B. Tighten Zoom
Gear Retainer clockwise so Retainer is snug. DO NOT overtighten.
3. Install components as shown, Diagrams A and B. Tighten Zoom
Gear Retainer clockwise so Retainer is snug. DO NOT overtighten.
4. Zoom Gear is a friction fit to the lens. Install lens and test zoom
function - Diagram C.
4. Zoom Gear is a friction fit to the lens. Install lens and test zoom
function - Diagram C.
5. Attach Port.
5. Attach Port.
1.
Install camera body in housing (without lens).
1.
Install camera body in housing (without lens).
Diagram C
Diagram C
Diagram B
Diagram B
© 2018 Ikelite Underwater Systems
© 2018 Ikelite Underwater Systems
ikelite.com
5509.32_Zoom_Gear_Sony_12-24_F4G_1-0218
ikelite.com
5509.32_Zoom_Gear_Sony_12-24_F4G_1-0218
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Related manuals

Download PDF

advertising