Ikelite | Flex Mount Kit for GoPro | Instruction manual | Ikelite Flex Mount Kit for GoPro Instruction Manual

Ikelite Flex Mount Kit for GoPro Instruction Manual
2602.2 GoPro Mount Kit
for DSLR Top Mount
2602.2 GoPro Mount Kit
for DSLR Top Mount
2602.2 GoPro Mount Kit
for DSLR Top Mount
2602.2 GoPro Mount Kit
for DSLR Top Mount
See Diagram A - reverse side
See Diagram A - reverse side
See Diagram A - reverse side
See Diagram A - reverse side
Assembly Instructions
Assembly Instructions
Assembly Instructions
Assembly Instructions
1. Place the Shoulder Washer
on the Screw with the
beveled edge against the
Screw Head.
2. Drop the 1/4-20 x 7/8” screw
with Shoulder Washer into the
top of the Flex Mount.
3. Using a flathead screwdriver,
attach the Flex Mount to the
Top Mount of an Ikelite DSLR
housing.
4. Apply a thin film of lubricant
to attachment points as
shown in Diagram A.
5. Press each component
together.
1. Place the Shoulder Washer
on the Screw with the
beveled edge against the
Screw Head.
2. Drop the 1/4-20 x 7/8” screw
with Shoulder Washer into the
top of the Flex Mount.
3. Using a flathead screwdriver,
attach the Flex Mount to the
Top Mount of an Ikelite DSLR
housing.
4. Apply a thin film of lubricant
to attachment points as
shown in Diagram A.
5. Press each component
together.
1. Place the Shoulder Washer
on the Screw with the
beveled edge against the
Screw Head.
2. Drop the 1/4-20 x 7/8” screw
with Shoulder Washer into the
top of the Flex Mount.
3. Using a flathead screwdriver,
attach the Flex Mount to the
Top Mount of an Ikelite DSLR
housing.
4. Apply a thin film of lubricant
to attachment points as
shown in Diagram A.
5. Press each component
together.
1. Place the Shoulder Washer
on the Screw with the
beveled edge against the
Screw Head.
2. Drop the 1/4-20 x 7/8” screw
with Shoulder Washer into the
top of the Flex Mount.
3. Using a flathead screwdriver,
attach the Flex Mount to the
Top Mount of an Ikelite DSLR
housing.
4. Apply a thin film of lubricant
to attachment points as
shown in Diagram A.
5. Press each component
together.
Ikelite Underwater Systems
50 West 33rd Street
Indianapolis, IN 46208 USA
Ikelite Underwater Systems
50 West 33rd Street
Indianapolis, IN 46208 USA
Ikelite Underwater Systems
50 West 33rd Street
Indianapolis, IN 46208 USA
Ikelite Underwater Systems
50 West 33rd Street
Indianapolis, IN 46208 USA
© 2013 Ikelite Underwater Systems
© 2013 Ikelite Underwater Systems
© 2013 Ikelite Underwater Systems
© 2013 Ikelite Underwater Systems
www.ikelite.com
www.ikelite.com
www.ikelite.com
www.ikelite.com
2602.2 GoPro Mount Kit
for DSLR Top Mount
2602.2 GoPro Mount Kit
for DSLR Top Mount
2602.2 GoPro Mount Kit
for DSLR Top Mount
2602.2 GoPro Mount Kit
for DSLR Top Mount
See Diagram A - reverse side
See Diagram A - reverse side
See Diagram A - reverse side
See Diagram A - reverse side
Assembly Instructions
Assembly Instructions
Assembly Instructions
Assembly Instructions
1. Place the Shoulder Washer
on the Screw with the
beveled edge against the
Screw Head.
2. Drop the 1/4-20 x 7/8” screw
with Shoulder Washer into the
top of the Flex Mount.
3. Using a flathead screwdriver,
attach the Flex Mount to the
Top Mount of an Ikelite DSLR
housing.
4. Apply a thin film of lubricant
to attachment points as
shown in Diagram A.
5. Press each component
1. Place the Shoulder Washer
on the Screw with the
beveled edge against the
Screw Head.
2. Drop the 1/4-20 x 7/8” screw
with Shoulder Washer into the
top of the Flex Mount.
3. Using a flathead screwdriver,
attach the Flex Mount to the
Top Mount of an Ikelite DSLR
housing.
4. Apply a thin film of lubricant
to attachment points as
shown in Diagram A.
5. Press each component
1. Place the Shoulder Washer
on the Screw with the
beveled edge against the
Screw Head.
2. Drop the 1/4-20 x 7/8” screw
with Shoulder Washer into the
top of the Flex Mount.
3. Using a flathead screwdriver,
attach the Flex Mount to the
Top Mount of an Ikelite DSLR
housing.
4. Apply a thin film of lubricant
to attachment points as
shown in Diagram A.
5. Press each component
1. Place the Shoulder Washer
on the Screw with the
beveled edge against the
Screw Head.
2. Drop the 1/4-20 x 7/8” screw
with Shoulder Washer into the
top of the Flex Mount.
3. Using a flathead screwdriver,
attach the Flex Mount to the
Top Mount of an Ikelite DSLR
housing.
4. Apply a thin film of lubricant
to attachment points as
shown in Diagram A.
5. Press each component
Ikelite Underwater Systems
50 West 33rd Street
Indianapolis, IN 46208 USA
Ikelite Underwater Systems
50 West 33rd Street
Indianapolis, IN 46208 USA
Ikelite Underwater Systems
50 West 33rd Street
Indianapolis, IN 46208 USA
Ikelite Underwater Systems
50 West 33rd Street
Indianapolis, IN 46208 USA
© 2013 Ikelite Underwater Systems
© 2013 Ikelite Underwater Systems
© 2013 Ikelite Underwater Systems
© 2013 Ikelite Underwater Systems
together.
www.ikelite.com
together.
www.ikelite.com
together.
www.ikelite.com
together.
www.ikelite.com
Diagram A
Diagram A
Diagram A
Diagram A
Attach this end
to to a GoPro
Housing
Attach this end
to to a GoPro
Housing
Attach this end
to to a GoPro
Housing
Attach this end
to to a GoPro
Housing
Attachment Point
Attachment Point
Attachment Point
Attachment Point
IKELITE #0184.1
IKELITE #0184.1
IKELITE #0184.1
IKELITE #0184.1
Silicone Lube
Silicone Lube
Silicone Lube
Silicone Lube
Attachment Point
Attachment Point
Attachment Point
Attachment Point
IKELITE #0184.1
IKELITE #0184.1
IKELITE #0184.1
IKELITE #0184.1
Silicone Lube
Silicone Lube
Silicone Lube
Silicone Lube
Screw
Attachment Point
Washer
Flex Mount
IKELITE #0184.1
Silicone Lube
IKELITE
Screw
Attachment Point
Washer
Flex Mount
IKELITE #0184.1
Silicone Lube
Top Mount
IKELITE
Screw
Attachment Point
Washer
Flex Mount
IKELITE #0184.1
Silicone Lube
Top Mount
IKELITE
Screw
Attachment Point
Washer
Flex Mount
IKELITE #0184.1
Silicone Lube
Top Mount
IKELITE
Top Mount
2602.2_GoPro_Mnt_Kit_Rel_Han_01-1113
2602.2_GoPro_Mnt_Kit_Rel_Han_01-1113
2602.2_GoPro_Mnt_Kit_Rel_Han_01-1113
2602.2_GoPro_Mnt_Kit_Rel_Han_01-1113
Diagram A
Diagram A
Diagram A
Diagram A
Attach this end
to to a GoPro
Housing
Attach this end
to to a GoPro
Housing
Attach this end
to to a GoPro
Housing
Attach this end
to to a GoPro
Housing
Attachment Point
Attachment Point
Attachment Point
Attachment Point
IKELITE #0184.1
IKELITE #0184.1
IKELITE #0184.1
IKELITE #0184.1
Silicone Lube
Silicone Lube
Silicone Lube
Silicone Lube
Attachment Point
Attachment Point
Attachment Point
Attachment Point
IKELITE #0184.1
IKELITE #0184.1
IKELITE #0184.1
IKELITE #0184.1
Silicone Lube
Silicone Lube
Silicone Lube
Silicone Lube
Screw
Attachment Point
Washer
Flex Mount
IKELITE #0184.1
Silicone Lube
IKELITE
Top Mount
2602.2_GoPro_Mnt_Kit_Rel_Han_01-1113
Screw
Attachment Point
Washer
Flex Mount
IKELITE #0184.1
Silicone Lube
IKELITE
Top Mount
2602.2_GoPro_Mnt_Kit_Rel_Han_01-1113
Screw
Attachment Point
Washer
Flex Mount
IKELITE #0184.1
Silicone Lube
IKELITE
Top Mount
2602.2_GoPro_Mnt_Kit_Rel_Han_01-1113
Screw
Attachment Point
Washer
Flex Mount
IKELITE #0184.1
Silicone Lube
IKELITE
Top Mount
2602.2_GoPro_Mnt_Kit_Rel_Han_01-1113
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Related manuals

Download PDF

advertising