Ikelite | Fiber Optic Coiled Cord | Instruction manual | Ikelite Fiber Optic Coiled Cord Instruction Manual

Ikelite Fiber Optic Coiled Cord Instruction Manual
4501 Fiber Optic Coiled Cord
Package Contents
Connector End
Connecting the Cord
Attach one connector end to your strobe, and the other end
to your housing so that the fiber optic cable is pointed
toward the camera flash.
Each Connector End contains an O-ring to assist in
attachment. O-rings are not intended to provide a
waterproof seal and we do not recommend applying
lubricant to the o-rings.
Customer Support
Ikelite Underwater Systems
Service Department
50 West 33rd St.
Indianapolis, IN 46208 USA
Email: ikelite@ikelite.com
Phone: 317-923-4523
Limited Warranty
This Ikelite product is warranted against any manufacturing
defects for a period of one (1) year from the original date of
purchase. Defective products should be returned to Ikelite
postage paid. Ikelite will, at its sole discretion, repair or
replace such products, and will return to customer postage
paid. All other claims of any nature are not covered. Except
as mentioned above, no other warranty expressed or
implied applies to this Ikelite product.
Returning Products for Service
Ikelite is most interested in performing any service to
ensure that all products perform as intended. Evidence of
purchase date must be provided to obtain warranty service.
No prior authorization is required. You may return directly to
us or through your dealer. Please include a brief description
of the problem, any relevant email correspondence, and/or
instructions. Always include name, shipping address, email
address, and phone number inside of the package. Send
postage paid to:
Ikelite Underwater Systems
Attention: Service Department
50 West 33 Street
Indianapolis, IN 46208 USA
No reimbursements for postage paid will be issued.
Note: Ikelite does not repair cords. Cords sent in for
service that are found to be defective will be replaced.
Returning Products for Service (outside the United States)
For the separate international customs documentation form
that you complete to accompany the shipment, please state
or designate that the enclosed products were originally
manufactured in the USA and are being returned to the
manufacturer for repair service. Value of the equipment
listed for customs purposes should be zero.
Ikelite Underwater Systems
50 West 33rd Street
Indianapolis, IN 46208 USA
© 2013 Ikelite Underwater Systems
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF