Ikelite | Steady Tray Mount Kit for Gamma | Instruction manual | Ikelite Steady Tray Mount Kit for Gamma Instruction Manual

Ikelite Steady Tray Mount Kit for Gamma Instruction Manual
1887.6 Tray Mount Kit for Gamma
1887.6 Tray Mount Kit for Gamma
See Diagram A - reverse side
See Diagram A - reverse side
Assembly Instructions
Assembly Instructions
1. Tighten the Thumb Screw onto the Tray (finger-tighten
only).
2. Place the Black Nylon Washer on the 1/4-20 x 7/8”
Screw and slide through the mounting hole. Hold the
screw head against the tray with one hand. With your
other hand, push the Flex Mount onto the 1/4-20 x 7/8”
Screw and over the Thumb Screw head.
3. Slide Lock Washer over screw and hand tighten Nut. For
more stability, finish tightening with a nutdriver or socket
wrench, and a flathead screwdriver.
4. Apply a thin film of lubricant to attachment points as
shown in Diagram A.
5. Press each component together.
6. Loosen Mount Strap and insert Gamma Light (not
included); retighten.
M27 Gamma Diffuser is included and threads onto the
Gamma front to spread out the beam for use as a video
or focus assist light. Lanyard Included.
- For additonal arm length, attach the 3/4” arm extension
between the Flex Mount and 1/2”-3/4” Adapter.
1. Tighten the Thumb Screw onto the Tray (finger-tighten
only).
2. Place the Black Nylon Washer on the 1/4-20 x 7/8”
Screw and slide through the mounting hole. Hold the
screw head against the tray with one hand. With your
other hand, push the Flex Mount onto the 1/4-20 x 7/8”
Screw and over the Thumb Screw head.
3. Slide Lock Washer over screw and hand tighten Nut. For
more stability, finish tightening with a nutdriver or socket
wrench, and a flathead screwdriver.
4. Apply a thin film of lubricant to attachment points as
shown in Diagram A.
5. Press each component together.
6. Loosen Mount Strap and insert Gamma Light (not
included); retighten.
M27 Gamma Diffuser is included and threads onto the
Gamma front to spread out the beam for use as a video
or focus assist light. Lanyard Included.
- For additonal arm length, attach the 3/4” arm extension
between the Flex Mount and 1/2”-3/4” Adapter.
© 2013 Ikelite Underwater Systems
© 2013 Ikelite Underwater Systems
Ikelite Underwater Systems
50 West 33rd Street
Indianapolis, IN 46208 USA
www.ikelite.com
Ikelite Underwater Systems
50 West 33rd Street
Indianapolis, IN 46208 USA
www.ikelite.com
1887.6 Tray Mount Kit for Gamma
1887.6 Tray Mount Kit for Gamma
See Diagram A - reverse side
See Diagram A - reverse side
Assembly Instructions
Assembly Instructions
1. Tighten the Thumb Screw onto the Tray (finger-tighten
only).
2. Place the Black Nylon Washer on the 1/4-20 x 7/8”
Screw and slide through the mounting hole. Hold the
screw head against the tray with one hand. With your
other hand, push the Flex Mount onto the 1/4-20 x 7/8”
Screw and over the Thumb Screw head.
3. Slide Lock Washer over screw and hand tighten Nut. For
more stability, finish tightening with a nutdriver or socket
wrench, and a flathead screwdriver.
4. Apply a thin film of lubricant to attachment points as
shown in Diagram A.
5. Press each component together.
6. Loosen Mount Strap and insert Gamma Light (not
included); retighten.
M27 Gamma Diffuser is included and threads onto the
Gamma front to spread out the beam for use as a video
or focus assist light. Lanyard Included.
- For additonal arm length, attach the 3/4” arm extension
between the Flex Mount and 1/2”-3/4” Adapter.
1. Tighten the Thumb Screw onto the Tray (finger-tighten
only).
2. Place the Black Nylon Washer on the 1/4-20 x 7/8”
Screw and slide through the mounting hole. Hold the
screw head against the tray with one hand. With your
other hand, push the Flex Mount onto the 1/4-20 x 7/8”
Screw and over the Thumb Screw head.
3. Slide Lock Washer over screw and hand tighten Nut. For
more stability, finish tightening with a nutdriver or socket
wrench, and a flathead screwdriver.
4. Apply a thin film of lubricant to attachment points as
shown in Diagram A.
5. Press each component together.
6. Loosen Mount Strap and insert Gamma Light (not
included); retighten.
M27 Gamma Diffuser is included and threads onto the
Gamma front to spread out the beam for use as a video
or focus assist light. Lanyard Included.
- For additonal arm length, attach the 3/4” arm extension
between the Flex Mount and 1/2”-3/4” Adapter.
© 2013 Ikelite Underwater Systems
© 2013 Ikelite Underwater Systems
Ikelite Underwater Systems
50 West 33rd Street
Indianapolis, IN 46208 USA
www.ikelite.com
Ikelite Underwater Systems
50 West 33rd Street
Indianapolis, IN 46208 USA
www.ikelite.com
Diagram A
Diagram A
Mount Strap
Attach this end
to a Gamma light.
Mount Strap
3/4” Flex Arm Extension
(optional to add between
Adaptor and FlexMount
to add arm length)
Attach this end
to a Gamma light.
IKELITE #0184.1
IKELITE #0184.1
Attachment Points
Attachment Points
Silicone Lube
Silicone Lube
1/2” Flex Arm
Extension
1/2” Flex Arm
Extension
1/2”-3/4”
Adapter
1/2”-3/4”
Adapter
IKELITE #0184.1
IKELITE #0184.1
Attachment Points
Attachment Points
Silicone Lube
Nut
Flex
Mount
Silicone Lube
GoPro
Lock
Washer
Thumb
Screw
Nut
Tray
Thumb
Screw
Tray
Black Nylon Washer
Black Nylon Washer
14-20 x 7/8” Screw
14-20 x 7/8” Screw
1887.6_Gamma_Photo_Kit_Tray_Mount_01-1113
1887.6_Gamma_Photo_Kit_Tray_Mount_01-1113
Diagram A
Diagram A
Mount Strap
Attach this end
to a Gamma light.
GoPro
Lock
Washer
Flex
Mount
Mount Strap
3/4” Flex Arm Extension
(optional to add between
Adaptor and FlexMount
to add arm length)
Attach this end
to a Gamma light.
IKELITE #0184.1
Attachment Points
Silicone Lube
Silicone Lube
1/2” Flex Arm
Extension
1/2” Flex Arm
Extension
1/2”-3/4”
Adapter
1/2”-3/4”
Adapter
IKELITE #0184.1
IKELITE #0184.1
Attachment Points
Attachment Points
Silicone Lube
GoPro
Lock
Washer
Flex
Mount
Thumb
Screw
Silicone Lube
Nut
Tray
Black Nylon Washer
1887.6_Gamma_Photo_Kit_Tray_Mount_01-1113
GoPro
Lock
Washer
Flex
Mount
14-20 x 7/8” Screw
3/4” Flex Arm Extension
(optional to add between
Adaptor and FlexMount
to add arm length)
IKELITE #0184.1
Attachment Points
Nut
3/4” Flex Arm Extension
(optional to add between
Adaptor and FlexMount
to add arm length)
Thumb
Screw
Tray
Black Nylon Washer
14-20 x 7/8” Screw
1887.6_Gamma_Photo_Kit_Tray_Mount_01-1113
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Related manuals

Download PDF

advertising