Posiflex | RT-5XXXE/Q | User manual | Posiflex RT-5XXXE/Q User Manual

Posiflex RT-5XXXE/Q User Manual
RT-5015E/5016E/5115E/5116E/
RT-5015Q/5016Q/5115Q/5116Q
Fanless Touch POS Terminal
User Manual
Package Contents





RT-5015E/Q 15” fanless touch terminal or
RT-5016E/Q 15.6” fanless touch terminal or
RT-5115E/Q 15” fanless touch terminal or
RT-5116E/Q 15.6” fanless touch terminal..x1
Power adapter……………………………..x1
Power cord………………………………...x1
User manual……………………………….x1
Screw for back cover……………………...x1
Views of RT-5XXXE/Q
Front View
Camera (Optional)
P-Cap Touch Panel
LED indicator
LED indicator
15” RT-5015E/5115E/5015Q/5115Q
15.6” RT-5016E/5116E/5016Q/5116Q
16940903020 Ver. B0
http://www.posiflex.com
1
Rear View
Thumbscrew for VESA Mount Bracket
System Back Cover
Attachment Bay
Wall- Mount
Screw Hole
Bottom View
Screw Hole
Release Lever for System Back Cover
Right-Side View
Power Button
Brightness Adjustment Button +
Brightness Adjustment Button -
2
Left-Side View
Rubber Shield for USB2.0 Port
View of I/O Interface of RT-5XXXE/Q
Bottom Side
DB9 COM Port
RJ50 COM Ports
CR Port
USB 3.0 Ports
Mini DisplayPort
LAN Port
24V PoweredUSB Port
DC IN Power Connector
Left Side
USB 2.0 Port
3
Connecting Power Adapter and Cables
The following provides instructions required to connect your cables.
1. To remove the back cover, hold down the
release levers at the bottom of the system
back cover and then pulling the cover
outwards.
2. Connect the connector of the power adapter to
the DC-IN power jack. If necessary, properly
insert other cables into the correct ports.
3. Neatly arrange the cables along the cable slots.
4. Place back the sytem back cover. Make sure it
is well locked into place with a click sound.
5. Make sure the cable could be pulled out of the cable exit from the bottom
of the base.
4
6. Please insert another screw into the screw hole
indicated in the figure, and secure it.
Adjustment for VESA Mount Bracket
1.
There are two thumbscrews on the VESA mount bracket. Loosen the
two thumbscrews.
2.
After loosening the thumbscrews, you can carefully move the monitor
downward around 45° to do the service.
5
3.
To close the VESA mount bracket, please gently move the monitor
back and then fasten the two thumbscrews.
Installing Optional Upgrade Kits and Peripherals
RT-5XXXE/Q is an expandable model which allows you to upgrade its own
capacity by additionally installing multiple peripheral devices, such as
magnetic stripe reader (MSR), fingerprint or iButton sensors, and 2nd POS
monitor, according to your preference. The following will give you brief
instructions on how to expand on your current POS system with these optional
upgrade kits. Before proceeding with the installation of peripherals, please
make sure the POS system is completely shut down to prevent damage.
Status LED Indicator
LED status indicator, which is located at the bottom edge of the LCD panel, is
mainly responsible for notifying users of the current system status by emitting
various LED signals. In the chart provided below, it describes all the possible
LED status as a quick reference.
15” RT-5015E/5115E/5015Q/5116Q
LED Status
Off
Green
Blue
Description
System power OFF
System standby
System power ON
15.6” RT-5016E/5116E/5016Q/5116Q
LED Status
Off
Orange
Blue
Description
System power OFF
System standby
System power ON
Powering ON/OFF RT-5XXXE/Q
Power ON RT-5XXXE/Q
Press down the power button to power on the POS.
Power OFF RT-5XXXE/Q
In most cases, press the power button of the POS to power
the system off. If the terminal fails to turn off the machine
for unknown reasons, please be advised to hold the power
button more than 10 seconds to force a shutdown of the
system.
6
Power
Button
Installing an Operating System
You are highly advised not to install an operating system on
RT-5XXXE/Q without professional instructions. Improper installation could
lead to system malfunction or failure. Please contact with your dealers about
the issues of operating system installation.
Performing System Recovery
For RT-5XXXE/Q model with preloaded operating systems, Recovery DVD
which includes useful utilities will be provided in the package to assist you in
efficiently restoring or repairing your damaged system. However, you are not
encouraged to recover your system without the help of system integrators.
Please be advised to contact your service center for further assistance with
system recovery.
Operation Environment
To prevent RT-5XXXE/Q from overheating, it is suggested to position your
terminal in a well-ventilated working environment. In doing so, please be
advised to keep the POS terminal at least 25mm away from other devices to
ensure the machine is properly cooled down and functioning normally.
7
Specifications
RT-5015E/5016E/5015Q/5016Q
CPU
System Memory
Storage Device
Power Supply
LCD Panel
LCD Resolution
Touch Sensor
Serial Port
USB Port
PoweredUSB
Port
LAN Port
Display Port
CR Port
Audio Port
Extension Slot
vPro
TPM
RAID
Dimension
RT-5015E/Q
RT-5016E/Q
Intel Kaby Lake-U Core i3 CPU
DDR4 SO-DIMM x 2
SATA Storage x 2
12V / 150W
15"TFT LCD with
15.6" TFT LCD with
LED backlight
LED backlight
1024 x 768
1920 x 1080
P-CAP touch
3 ports, DB9 x 1+ RJ-50 x 2
3 ports, USB3.0 x 2+ USB2.0 x 1
24V PoweredUSB port x 1
10/100/1000 Mb x 1
1 x Mini DP port (on I/O plate)
1 port, controlling 2 CR
Internal 2W speaker x 1
M.2 slot x 1
N/A
N/A
N/A
368 x 292 x 46.6
402 x 251 x 41.2
(W x V x D in mm)
Environmental
Requirements
Regulation Rules
Operating:
0°C 〜 40°C, 20%RH - 90%RH (with HDD)
0°C 〜 50°C, 20%RH - 90%RH (with SSD)
Storage:
-20°C 〜 70°C, 10%RH - 90%RH
FCC/CE
8
Attachment
RA-101
RA-103
RA-104
RA-301
LM/TM-4010DP
LM/TM-4011DP
Slim MSR attachment for RT series
iButton (or RFID) with one USB port attachment
for RT series
2D scanner attachment for RT series
3-in-1 MSR + Fingerprint Sensor + 2D scanner
attachment for RT series
9.7" 2nd display for RT series terminal
10.1" 2nd display for RT series terminal
9
RT-5115E/5116E/5115Q/5116Q
CPU
System Memory
Storage Device
Power Supply
LCD Panel
LCD Resolution
Touch Sensor
Serial Port
USB Port
PoweredUSB Port
LAN Port
Display Port
CR Port
Audio Port
Extension Slot
vPro
TPM
RAID
Dimension
RT-5115E/Q
RT-5116E/Q
Intel Kaby Lake-U Core i5 CPU
DDR4 SO-DIMM x 2, max. 16GB
SATA Storage x 2
12V / 150W
15"TFT LCD with
15.6" TFT LCD with
LED backlight
LED backlight
1024 x 768
1920 x 1080
P-CAP touch
3 ports, DB9 x 1+ RJ-50 x 2
3 ports, USB3.0 x 2+ USB2.0 x 1
24V PoweredUSB port x 1
10/100/1000 Mb x 1
1 x Mini DP port (on I/O plate)
1 port, controlling 2 CR
Internal 2W speaker x 1
M.2 slot x 1
Yes
Yes
Yes
368 x 292 x 46.6
402 x 251 x 41.2
(W x V x D in mm)
Environmental
Requirements
Regulation Rules
Attachment
RA-101
RA-103
RA-104
RA-301
LM/TM-4010DP
LM/TM-4011DP
Operating:
0°C 〜 40°C, 20%RH - 90%RH (with HDD)
0°C 〜 50°C, 20%RH - 90%RH (with SSD)
Storage:
-20°C 〜 70°C, 10%RH - 90%RH
FCC/CE
Slim MSR attachment for RT series
iButton (or RFID) with one USB port attachment
for RT series
2D scanner attachment for RT series
3-in-1 MSR + Fingerprint Sensor + 2D scanner
attachment for RT series
9.7" 2nd display for RT series terminal
10.1" 2nd display for RT series terminal
10
※ The product information and specifications are subject to change without
prior notice. To get the detailed information on the
RT-5XXXE/Q, please check this model from Posiflex Global Website.
CAUTION
RISK OF EXPLOSION IF BATTERY IS REPLACED
BY AN INCORRECT TYPE
DISPOSE OF USED BATTERIES ACCORDING
TO THE INSTRUCTIONS
警告使用者
這是甲類的資訊產品,在居住的
環境中使用時,可能會造成射頻
干擾,在這種情況下,使用者會
被要求採取某些適當的對策。
警告
本電池如果更換不正確會有爆炸的危險
請依製造商說明書處理用過之電池
11
<MEMO>
12
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising